RÉSUMÉ
BACKGROUND:There is no consensus on the optimal bone tunnel position in the lateral clavicle,which guides coracoclavicular ligament reconstruction.Postoperative complications such as enlargement of the lateral clavicle bone tunnel,bone osteolysis,clavicle fracture,and failure of internal fixation are likely to occur.Bone mass density plays an important role in the strength and stability of endophytic fixation.Regional differences in the bone mass density of the distal clavicle should not be overlooked in the repair and reconstruction of acromioclavicular dislocation.Currently,there are no quantitative clinical studies in humans regarding the bone mass density of the distal clavicle. OBJECTIVE:To measure the magnitude of bone mass density in different regions of the distal clavicle by quantitative CT to provide a reference for surgeons to repair and reconstruct the coracoclavicular ligament. METHODS:101 patients undergoing quantitative CT checking in Fuyang People's Hospital Affiliated to Anhui Medical University from October to December 2022 were enrolled,from which 1 616 samples of subdivisional bone mass density of the distal clavicle were measured.For each of the quantitative CT samples,firstly,the distal clavicle was divided medially to laterally into the following four regions:conical nodal region(region A),inter-nodal region(region B),oblique crest region(region C)and distal clavicular region(region D).Secondly,each region was divided into the first half and the second half to determine eight subdivisions,then setting semiautomatic region of interest(ROI)in each subdivision:(ROI A1,A2,B1,B2,C1,C2,D1,and D2).Thirdly,each quantitative CT scan was transferred to the quantitative CT pro analysis workstation,and cancellous bone mass density was measured in the distal clavicle ROI.Finally,the clavicular cortex was avoided when measuring. RESULTS AND CONCLUSION:(1)There was no statistically significant difference in bone mineral density on the different sides of the shoulder(P＞0.05).(2)The analysis of bone mineral density in eight sub-areas of the distal clavicle A1,A2,B1,B2,C1,C2,D1,and D2 showed statistically significant differences(P＜0.05).It could be considered that there were differences in bone mineral density in different areas of the distal clavicle.After pairwise comparison,there was no statistically significant difference in bone mineral density between A1 and A2,D1 and D2,A2 and B1(P＞0.05),and there was a statistically significant difference in bone mineral density between the other sub-areas(P＜0.05).(3)The bone mineral density in the region A2 of the anatomical insertion of the conical ligament was significantly higher than that in the inter-nodular area(region B)(P＜0.05).The bone mineral density in the region A1 was higher than that in the region A2,but the difference was not statistically significant(P＞0.05).The bone mineral density in the region C1 of the anatomical insertion of the trapezium ligament was higher than that in regions C2,D1 and D2,and the bone mineral density in the inter-nodular area(region B)was significantly higher than that in regions C and D(P＜0.05).(4)These results have suggested that there are differences in bone mass density in different regions of the distal clavicle;regional differences in bone mass density in the distal clavicle during repair and reconstruction of acromioclavicular dislocation cannot be ignored.Consideration should be given not only to biomechanical factors but also to the placement of implants or bone tunnels in regions of higher bone mass density,which could improve the strength and stability of implant fixation and reduce the risk of complications such as bone tunnel enlargement,osteolysis,fracture and implant failure.
RÉSUMÉ
Acromioclavicular joint dislocation is a common shoulder injury caused by injuries to the acromioclavicular and coracoclavicular ligaments, which may result in pain and limited mobility in the affected shoulder. Currently, hook plate fixation is commonly used to treat Rockwood type III-VI acromioclavicular joint dislocation in clinical settings. However, there are complications such as subacromial impingement and osteolysis. Therefore, the treatment has gradually shifted from rigid fixation to elastic fixation, with a preference for reconstruction of the coracoclavicular ligament. The internal fixation with the Endobutton system allows for micro-movement of the acromioclavicular joint, but its loop length can′t be freely adjusted. The Tightrope system is developed based on the improvement of the Endobutton system, which has been increasingly used in clinical settings in recent years, with the advantages of easy operation, adjustability and minimal trauma. However, postoperative complications such as clavicular and/or coracoid fractures and loss of reduction are prone to occur. To date, there are various and inconsistent treatment plans of internal fixation with Tightrope system for acromioclavicular joint dislocation, and their clinical effects vary. To this end, the authors reviewed the structure, biomechanics, surgical techniques, and therapeutic effects of the internal fixation with Tightrope system in the treatment of acromioclavicular joint dislocation, aiming to provide a reference for the selection of its clinical treatment.
RÉSUMÉ
Objective:To explore the biomechanical stability of a novel anchor-loop internal fixation system in the treatment of acromioclavicular joint dislocation using cadaveric specimens.Methods:The acromioclavicular ligaments were severed in 12 complete shoulder joint specimens, in which the quasi-static non-destructive cycle experiment was performed until the coracoclavicular ligaments failed. The failure intensities of the coracoclavicular ligaments were recorded. Next, the 12 specimens were randomly divided into groups A, B, C and D ( n=3), in which 4 different internal fixation materials were used respectively to reduce and fix the acromioclavicular joint. Group A was subjected to 3.5 mm clavicular hook locking compression plate, group B to 5 mm soft tissue with wire anchor, group C to 10 mm Endobutton steel plate, and group D to the novel anchor-loop internal fixation system (5 mm soft tissue with wire anchor + 10 mm Endobutton steel plate). An X-ray machine was used to evaluate the reduction and internal fixation of the acromioclavicular joint. After the shoulder specimens were securely fastened by a homemade fixation jig to a 100 KN electronic universal mechanical testing machine, each experimental specimen was subjected to a destructive static tensile mechanic determination in the vertical direction at a loading speed of 100 mm/min. The load-displacement curves were recorded and drawn by a computer connected with the biomechanical testing machine. The failure strength and failure causes were recorded for each internal fixation. Results:The fracture strength of the coracoclavicular ligament in 12 cadaver specimens was (374.6±0.8) N. The mechanical load of internal fixation failure was (409.5±2.6) N in group A, (297.8±3.4) N in group B, (375.2±3.1) N in group C and (376.2±3.1) N in group D. The internal fixation failure was due to clavicular fracture in 2 specimens and to acromial fracture in 1 specimen in group A, to anchor protrusion in all the 3 specimens in group B, to coracoid base fracture in all the 3 specimens in group C, and to anchor protrusion in all the 3 specimens in group D. The mechanical loads of internal fixation failure were significantly different among the 4 experimental groups ( P<0.05). The mechanical load of internal fixation failure in group D was significantly different from that in groups A and B ( P<0.05). Conclusions:Our self-developed novel anchor-loop internal fixation system can effectively reposit the acromioclavicular joint to treat acromioclavicular joint dislocation, because it conforms to the biomechanical characteristics of the acromioclavicular joint, and is easy to handle. Therefore, its feasibility is high.
RÉSUMÉ
Objective To compare the efficacy of TightRope loop plate and Endobutton plate in the treatment of acromioclavicular joint dislocation.Methods A retrospective analysis was conducted on 94 patients with acromioclavicular joint dislocation who were treated at this center from March 2021 to February 2023.They were divided into two groups based on different admission date.The Group E(n =47)received Endobutton plate treatment between March 2021 and February 2022,while the Group T(n =47)received TightRope loop plate treatment between March 2022 and February 2023.At the last follow-up,the perioperative indicators,Visual Analogue Scale(VAS),Constant-Murley shoulder joint function scores,and surgical complications were compared between the two groups.Results The surgical time,intraoperative bleeding,incision length,and VAS scores at 7 days after surgery in the Group T were shorter or lower than those in the Group E(P<0.05).There were no statistical differences in the incidence of perioperative nerve injury,internal fixation displacement,clavicle fracture,vascular injury,and infection between the two groups(P>0.05).The subjective and objective scores of Constant-Murley shoulder joint function in both groups at9 months after surgery showed significant improvement compared to preoperative scores(all P =0.000).There was no significant difference in the subjective and objective scores of Constant-Murley shoulder joint function between the two groups at 9 months after surgery(P>0.05).Conclusions The treatment of acromioclavicular joint dislocation with TightRope loop plate ot or Endobutton plate has a significant effect and can effectively improve shoulder joint function.Compared with Endobutton plate,use of TightRope loop plate has minor surgical trauma,less bleeding,and significantly reduced postoperative pain,being more conducive to early functional exercise for patients.
RÉSUMÉ
Objective To explore the method and the clinical effect of minimally invasive treating ac-romioclavicular joint dislocation by modified technique bare-handed Tight Rope.Methods A retrospec-tive analysis was performed on 61 cases of acromioclavicular joint dislocation(35 males and 26 fe-males,aged 45.6±5.2 years),treated with minimally invasive internal fixation by modified technique bare-handed Tight Rope between June 2018 and November 2021 in our hospital.According to Tossy classification,21 of them were Tossy Ⅱ and 40 were Tossy Ⅲ.The clinical effect was evaluated by Karlsson criteria,and the shoulder function was assessed by using the Oxford shoulder joint and Con-stant-Murley scores.Results All patients were followed up 9～12 months(11.2 months on the average).Sixty of them were restored without re-dislocation,reaching 60 of excellence and an excellence rate of 98.36％.At the last follow-up,the Constant-Murley and Oxford shoulder joint scores were 95.65±2.32 and 12.92±0.81,both significantly better than before surgery(P<0.01),with the satisfaction rate of 96.74％.Conclusion The treatment of acromioclavicular joint dislocation with modified technique bare-handed Tight Rope is minimally invasive,stable,not easy to relocate,and friendly to acromiocla-vicular joint and subacromial structure.Moreover,the shoulder joint function is well-recovered after the surgery with satisfactory effect.
RÉSUMÉ
Varmam- a discrete medical science and a great contribution of Siddhars to Tamil Nadu. It encompases Varma martial arts, Varma therapy, internal and external medicines. Varma therapy and medicines effectively treat neuro musculoskeletal conditions which is admirable. Shoulder pain is most common orthopaedic condition. It is the third common cause of musculoskeletal consultations in primary care. Approximately 1% of adult develops new shoulder pain annually. Common pathological conditions of shoulder like rotator cuff disorders and adhesive capsulitis etc exhibits similar clinical features like pain and stiffness of shoulder joint and restricted movements. Varma therapy rearranges and regulates the “Vaasi” and consequently helps to maintain the equilibrium of trihumours (Vatham, Pitham, Kapham). This review article explicates the Varma points for the treatment of shoulder pathological conditions, the exact anatomical location of Varma points and the appropriate method of its manipulation, certainly a key to further research articles.
RÉSUMÉ
OBJECTIVE@#This study aims to examine the biomechanical effects of different reconstruction methods, including single-bundle, double-bundle anatomical reconstruction, and double-bundle truly anatomical reconstruction of the coracoclavicular ligament on the acromioclavicular joint using finite element analysis, to provide a theoretical basis for the clinical application of truly anatomical coracoclavicular ligament reconstruction.@*METHODS@#One volunteer, aged 27 years old, with a height of 178 cm and a weight of 75 kg, was selected for CT scanning of the shoulder joint. Three-dimensional finite element models of single-bundle reconstruction, double-bundle anatomical reconstruction, and double-bundle truly anatomical reconstruction of coracoclavicular ligament were established by using Mimics17.0, Geomagic studio 2012, UG NX 10.0, HyperMesh 14.0 and ABAQUS 6.14 software. The maximum displacement of the middle point of the distal clavicle in the main loading direction and the maximum equivalent stress of the reconstruction device under different loading conditions were recorded and compared.@*RESULTS@#The maximum forward displacement and the maximum backward displacement of the middle point of the distal clavicle in the double-bundle truly anatomic reconstruction were the lowest, which were 7.76 mm and 7.27 mm respectively. When an upward load was applied, the maximum displacement of the distal clavicle midpoint in the double-beam anatomic reconstruction was the lowest, which was 5.12 mm. Applying three different loads forward, backward, and upward, the maximum equivalent stress of the reconstruction devices in the double-beam reconstruction was lower than that in the single-beam reconstruction. The maximum equivalent stress of the trapezoid ligament reconstruction device in the double-bundle truly anatomical reconstruction was lower than that in the double-bundle anatomical reconstruction, which was 73.29 MPa, but the maximum equivalent stress of the conoid ligament reconstruction device was higher than that of the double-bundle anatomical reconstruction.@*CONCLUSION@#The truly anatomical reconstruction of coracoclavicular ligament can improve the horizontal stability of acromioclavicular joint and reduce the stress of the trapezoid ligament reconstruction device. It can be a good method for the treatment of acromioclavicular joint dislocation.
Sujet(s)
Humains , Adulte , Articulation acromioclaviculaire/chirurgie , Analyse des éléments finis , Ligaments articulaires/chirurgie , Articulation glénohumérale/chirurgie , 33584 , Luxations/chirurgieRÉSUMÉ
ObjectiveThe study aims to determine whether the horizontal posterior displacement of the distal clavicle in patients with acromioclavicular joint dislocation can be corrected via the application of modified intraoperative axillary fluoroscopy. MethodsFrom February 2019 to April 2021， 50 patients with Rockwood type Ⅲ acromioclavicular joint dislocation eligible for inclusion were randomly divided into two groups： the normal （32 cases） and the experimental （18 cases）. The conventional anteroposterior position radiographs were obtained to detect the surgery effect on the patients in the normal group. In experimental group， modified intraoperative axillary radiographs were obtained， with the concept of polar coordinates introduced to reduce the horizontal posterior translation of the clavicle. Then we compared the perioperative parameters， such as average operative time， intraoperative blood loss between the two groups. The Constant score was used for assessing the postoperative function of the shoulder joint in the follow-up visits. ResultsNo statistically significant difference was found in gender， age， duration of injury， underlying diseases， intraoperative blood loss and operative time between the two groups. The postoperative shoulder function score of the experimental group was higher than that of the normal group. ConclusionsThe application of modified intraoperative axillary fluoroscopy is recommendable for accurately reducing posterior translation of the distal clavicle， and meanwhile helpful for the precise placement of the clavicular plate.
RÉSUMÉ
One case of suppurative acromioclavicular arthritis caused by Staphylococcus aureuswas reported. The patient was admitted to hospital due to swelling and pain in the right shoulder, limited mobility without no obvious cause.Through medical history, physical examination, imaging examination, and local tissue bacterial culture, it was confirmed that the infection was caused by Staphylococcus aureus. After surgery and anti infection treatment, satisfactory treatment results were achieved. Through literature review, 95 cases of suppurative acromioclavicular arthritis were retrieved and analyzed from 57 articles.Among them, 26 cases (27%) were infected with Staphylococcus aureus, including 3 cases of clearly identified methicillin-resistant Staphylococcus aureus, 2 cases of methicillin-sensitive Staphylococcus aureus, and 1 case of methicillin-resistant Staphylococcus epidermidis; 13 cases (14%) of Streptococcus; There were 6 cases (6%) of special pathogens, including 2 cases of Haemophilus parainfluenzae, 1 case of Candida, 1 case of Bacillus pallidum, 1 case of Mycobacterium avium, and 1 case of Pasteurella multocida; 50 cases (53%) of specific infections with pathogens were not clearly reported. Suppurative acromioclavicular arthritis has the characteristics of difficult early diagnosis, rapid disease progression, and strong destructiveness. MRI and ultrasound have high specificity and sensitivity in the diagnosis of this disease, and ultrasound can assist in obtaining joint fluid for examination. Early identification of the pathogen is the key to the treatment of this disease. Before identifying the pathogen, antibiotics should not be used arbitrarily. After diagnosis, timely anti infection treatment should be carried out, and if necessary, surgical debridement should be performed. The vast majority of patients can achieve satisfactory and accurate treatment results after active and standardized treatment.
RÉSUMÉ
Objective:To compare the clinical efficacy of anatomical reconstruction of coracoclavicular ligament at the original insertion point and clavicular hook plate fixation in the treatment of acromioclavicular joint dislocation.Methods:Retrospective analysis was made on the data of 67 patients with acromioclavicular joint dislocation who received surgical treatment in the Department of Orthopaedics of the First Affiliated Hospital of Nanjing Medical University from June 2015 to January 2021. According to the surgical method, they were divided into reconstruction group (using the technique of anatomical reconstruction of coracoclavicular ligament at the original insertion point) and hook plate group (using the clavicular hook plate). There were 37 cases in the reconstruction group, including 26 males and 11 females, aged 47.2±9.6 years (range, 18-65 years), 13 cases on the left and 24 cases on the right. Among the 37 patients, 8 were sports injuries, 14 were falls, 11 were traffic accidents, and 4 were external force injuries. The average time from injury to surgery was 8.3±2.3 days. There were 30 cases in the hook plate group, including 24 males and 6 females, aged 47.4±9.7 years (range, 18-67 years), 12 cases on the left and 18 cases on the right. Among the 30 patients, 7 were sports injuries, 11 were falls, 9 were traffic accidents, and 3 were external force injuries. The average time from injury to surgery was 7.9±2.6 days. The surgical time, incision length, intraoperative bleeding, hospital stay, postoperative coracoclavicular separation ratio, and postoperative complications were compared between the two groups. Constant-Murley score and visual analog scale (VAS) were used to assess the shoulder joint function and pain degree of patients.Results:Both groups of patients were followed up, with a follow-up time of 12.3±0.4 months for the reconstruction group and 12.2±0.5 months for the hook plate group. The operation time (105.8±10.0 min), incision length [12.0 (11.0, 13.0) cm] and hospitalization time (6.8±2.1 d) in the reconstruction group were longer than those in the hook plate group [48.3±4.9 min, 10.0 (10.0, 11.0) cm, and 5.5±2.7 d], while the intraoperative blood loss (75.1±3.9 ml) was less than that in the hook plate group (90.3±6.3 ml), the differences were statistically significant ( P<0.05). The VAS [4.0 (3.0, 5.0), 3.0 (3.0, 3.0), 2.0 (1.0, 2.0) points] and Constant-Murley score (65.4±4.5, 84.9±2.5, 90.1±2.5 points) of the reconstruction group at 3 days, 3 months, and 12 months after surgery were better than those of the hook plate group [5.0 (4.0, 5.0), 4.0 (4.0, 4.0), 3.0 (3.0, 4.0) and 56.9±3.5, 79.6±4.0, 86.8±2.4 points], the difference was statistically significant ( P<0.05). At the last follow-up, there was a statistically significant difference in the separation ratio of coracoclavicular distance between the reconstruction group (0.12±0.08) and the hook plate group 0.22±0.15 ( t=3.25, P=0.002). There was no significant difference ( Z=-0.52, P=0.605) in the separation ratio of acromioclavicular distance [0.16 (0.05, 0.25) and 0.16 (0.04, 0.40)]. In the hook plate group, 6 cases had shoulder joint foreign body sensation and 2 cases had acromioclavicular joint redislocation (both Rockwood type III). Because the shoulder joint function did not affect their daily life, neither patient underwent secondary surgery. And no case of acromioclavicular joint redislocation occurred in the reconstruction group. Conclusion:Compared with the clavicular hook plate fixation, anatomic reconstruction of coracoclavicular ligament at the original insertion point in the treatment of acromioclavicular joint dislocation can reduce the pain of the shoulder joint earlier, which has the characteristics of small trauma, good effect, and reduces the steps of internal fixation removal, and has good clinical curative effect.
RÉSUMÉ
Objective To analyze and describe the morphological characteristics of the proximal origin of the biceps brachii, and measure the anatomical data of its tendons, so as to provide references for related clinical applications of the biceps brachii. Methods Six adult shoulder specimens (4 on the left and 2 on the right) were dissected to observe the origin, morphology, and course of the biceps brachii tendon and its adjacent relationship with the coracobrachialis muscle, musculocutaneous nerve and other structures. And then the length, width, and thickness of the biceps tendon were measured. Results The origin of the short head of biceps consisted of muscle fibers attaching directly to the tip of the coracoid process, with a thin, tendinous aponeurosis covering its anterior surface, rather than a true tendon as previously described. The mean of length,widths and thickness of the short head of biceps were (107.7±9.6) mm,(20.0±1.5)mm and (5.8±2.0)mm. Conclusion The short head of the biceps brachii is directly from the coracoid process with muscle fibers.
RÉSUMÉ
ABSTRACT Objectives: We aimed to compare the functional and radiographical outcomes of reconstruction of acute unstable acromioclavicular joint (ACJ) dislocation using Hook Plate (HP) versus Suture Endobutton (SE) fixation techniques. Methods: Forty-six consecutive patients with grade III to V ACJ dislocation according to Rockwood classification who underwent either HP or SE fixation in the period between January 2017 and June 2020 were evaluated. The treatment modalities were divided into either HP or SE fixation. The radiological assessment included standard anterior-posterior (AP) views to evaluate coracoclavicular (CC) distances for vertical reduction. Results: CC distances were grouped as preoperative (CC1), early postoperative (CC2), and late postoperative (CC3). The distance variance between CC2 and CC3 was referred as ΔCC (CC3 - CC2). A statistically significant difference was found in ΔCC between the two groups (p=0.008). ΔCC was significantly higher in the SE group compared to the HP group (p<0.05). The Constant and UCLA Scores of patients in the SE group were found to be significantly higher than in the HP group patients. Conclusion: Clinical outcomes were more satisfactory in patients with acute unstable ACJ dislocation who underwent SE compared to HP procedures, at the end of the first year. Evidence Level IV; Case Series.
RESUMO Objetivo: Nosso objetivo foi comparar os resultados funcionais e radiográficos da reconstrução da luxação instável aguda da articulação acromioclavicular (ACJ) utilizando técnicas de fixação com placa com gancho (HP) versus botão de sutura (SE). Métodos: 46 pacientes com luxação da ACJ de grau III a V, de acordo com a classificação de Rockwood, que foram submetidos à fixação com HP ou SE no período de janeiro de 2017 a junho de 2020, foram avaliados. As modalidades de tratamento foram divididas em fixação HP ou SE. Na avaliação radiológica, foi utilizada a incidência antero-posterior (AP) para avaliação da redução vertical, por meio da medida da distância córaco-clavicular (CC). Resultados: As distâncias CC foram agrupadas em pré-operatória (CC1), pós-operatória imediata (CC2) e pós-operatória tardia (CC3). A variação da distância entre (CC2) e (CC3) foi denominada ΔCC. Uma diferença estatisticamente significativa foi encontrada na ΔCC entre os dois grupos (p=0,008). O ΔCC foi significativamente maior no grupo SE em comparação com o grupo HP (p <0.05). As pontuações de Constant e UCLA dos pacientes do grupo SE foram significativamente mais elevadas do que as dos pacientes do grupo HP. Conclusão: Os resultados clínicos foram mais satisfatórios com a técnica SE em comparação com a HP ao final do primeiro ano. Nível de Evidência IV; Série de casos.
RÉSUMÉ
Resumen: Introducción: la luxación de la articulación acromioclavicular (AC) es una lesión frecuente que se observa en adultos jóvenes. El objetivo es describir una técnica quirúrgica que pueda restablecer la estabilidad horizontal y vertical de la articulación AC. Material y métodos: se describe una técnica quirúrgica utilizando un aloinjerto para la reconstrucción anatómica de los ligamentos coracoclaviculares (CC) y AC para luxaciones AC grado III-V de acuerdo con la clasificación de Rockwood. Resultados: es una técnica quirúrgica con reconstrucción anatómica y biológica de los ligamentos CC y AC con injerto. Se realizan dos túneles óseos en la clavícula pasando el cabo lateral del injerto por debajo del acromion; posteriormente se fijan los dos cabos con dos tornillos bioabsorbibles, restaurando de esta manera la estabilidad vertical y horizontal. Conclusión: este procedimiento permite restablecer la estabilidad vertical y horizontal de la articulación AC. Se requieren estudios de seguimiento para reportar resultados funcionales y radiológicos con el fin de poder asegurar ventajas en comparación con las técnicas existentes.
Abstract: Introduction: dislocation of the acromioclavicular (AC) joint is a common injury seen in young adults. The objective is to describe a surgical technique that can restore the horizontal and vertical stability of the AC joint. Material and methods: we describe a surgical technique that can restore horizontal and vertical stability using an allograft for the anatomical reconstruction of the CC and AC ligaments, for AC grade III-V dislocations according to the Rockwood classification. Results: this is a surgical technique with anatomical and biological reconstruction of the CC and AC ligaments, using an allograft. Two bone tunnels are made in the clavicle, passing the lateral end of the graft below the acromion; then the two ends are fixed with two bioabsorbable screws, restoring vertical and horizontal stability. Conclusion: this procedure allows to restore the vertical and horizontal stability of the AC joint. Follow up studies are required to report functional and radiological results, in order to ensure advantages compared to existing techniques.
RÉSUMÉ
Objective:To compare the clinical efficacy between coracoclavicular ligament anatomical reconstruction and clavicular hook plate in the treatment of Neer Ⅱb distal clavicular fractures.Methods:A total of 64 patients with Neer Ⅱb clavicular fracture were treated at Department of Orthopaedics, The First Affiliated Hospital to Nanjing Medical University from September 2016 to June 2019. They were 35 males and 29 females, aged from 19 to 68 years (average, 50.7 years). They were assigned into 2 groups according to their operative methods: a reconstruction group of 30 cases undergoing coracoclavicular ligament anatomical reconstruction and a hook plate group of 34 cases undergoing fixation with a clavicular hook plate. The 2 groups were compared in terms of hospital stay, operation time, intraoperative blood loss, surgical incision length, postoperative coracoclavicular separation ratio, visual analogue scale (VAS) and Constant-Murley shoulder scores at 3, 6 and 12 months after operation, and postoperative complications.Results:There was no significant difference in general data between the 2 groups, showing comparability between groups ( P>0.05). Operations were completed uneventfully and surgical incisions healed by primary intention in both groups after operation. All the patients were followed up for 12 to 24 months (average, 14.6 months). The operation time [(74.6±22.0) min] and incision length [(10.4±0.4) cm] were significantly shorter but the intraoperative blood loss [(90.2±5.3) mL] was significantly less in the hook plate group than those in the reconstruction group [(95.6±20.8) min, (12.4±0.9) cm and (74.2±3.5) mL] ( P<0.05). There was no significant difference in hospital stay between the 2 groups ( P>0.05). At 3, 6 and 12 months after operation, the VAS scores (1.8±0.5, 1.2±0.3 and 1.1±0.2) and Constant-Murley scores (85.2±4.6, 91.1±2.6 and 92.1±2.2) in the reconstruction group were significantly better than those in the hook plate group (3.2±1.0, 1.6±0.3 and 1.5±0.3; 73.6±2.9, 85.9±4.6 and 87.0±3.1) ( P<0.05). At the last follow-up, the postoperative coracoclavicular separation ratio (elevation) in the hook plate group (0.20±0.16) was significantly greater than that in the reconstruction group (0.10±0.05) ( P<0.05). Conclusion:In the treatment of Neer ⅡB distal clavicular fractures, coracoclavicular ligament anatomical reconstruction may lead to better fixation and fewer postoperative complications than a clavicular hook plate, demonstrating fine clinical efficacy.
RÉSUMÉ
Objective:To compare the clinical effective of clavicular hook plate with extra suture hole and traditional hook plate in the treatment of acute acromioclavicular dislocation.Methods:This study retrospectively analyzed the clinical data of traumatic acromioclavicular dislocation patients who were treated by operation from March 2017 to September 2020. The patients were included in traditional hook plate (THP) group and triangle stabilization technique hook plate (TSTHP) group according fracture fixations. TSTHP group adopted clavicular hook plate with extra suture hole. There were 27 patients in THP group with 18 male patients and 9 female patients; average age with 37.56±8.94 years old; 16 patients injured left side and 11 patients injured right side; crush injuries of 10 patients, traffic injuries of 9 patients and sports injuries of 8 patients; Rockwood classification of type III (9 patients), type IV (10 patients) and type V (8 patients). There were 20 patients in TSTHP group with 15 male patients and 5 female patients; average age with 38.95±9.91 years old; 13 patients injured left side and 7 patients injured right side; crush injuries of 9 patients, traffic injuries of 8 patients and sports injuries of 3 patients; Rockwood classification of type III (5 patients), type IV (9 patients) and type V (6 patients). The operation time, intraoperative bleeding, postoperative coracoclavicular space, visual analogue scale (VAS) and shoulder joint Constant-Murley score were compared between the two groups.Results:The operation time and blood loss of THP group and TSTHP group were 51.07±11.27 min, 87.41±15.34 ml and 55.65±8.59 min, 90.50±14.32 ml, respectively. The difference was not statistically significant ( t=1.52, 0.70, all P>0.05). Patients in both groups were followed up for 12 to 14 months after operations, with an average of 12.28 months. Six months after surgery, the coracoclavicular spaces of THP group and TSTHP group were 12.16±0.90 mm and 11.26±0.70 mm, respectively. The difference was statistically significant ( t=3.70, P<0.001). Postoperative VAS scores (2 days, 3 months, 6 months and 12 months) of TSTHP group [1.8±0.77, 0.00(0.00, 1.00), 0.00 (0.00, 0.00), 0.00(0.00, 0.00)] were significantly better than THP group [4.22±1.25, 2.00 (1.00, 3.00), 1.00 (0.00, 1.00), 0.00 (0.00, 1.00)]. The difference was statistically significant ( t=7.65, P<0.001; Z=4.85, P<0.001; Z=3.44, P=0.001; Z=2.96, P=0.003). Postoperative Constant-Murley scores (3 months, 6 months and 12 months) of TSTHP group (87.00±5.18, 91.25±2.75, 92.30±2.74) were significantly better than THP group (76.96±5.21, 83.22±3.86, 85.22±3.49). The difference was statistically significant ( t=6.54, 7.93, 7.51; P<0.001). The postoperative complication rates of THP group were higher than TSTHP group [70.4% (19/27) vs. 5.0% (1/20)]. Conclusion:In the treatment of acute acromioclavicular dislocation, the clavicular hook plate with extra suture hole can obtain satisfactory clinical effect compared with the THP, and clavicular hook plate with extra suture hole is more conducive to early recovery of shoulder function and reduce postoperative complications.
RÉSUMÉ
Objective:To investigate the early clinical effects of orthopedic surgery robot-assisted double Endobutton titanium plate internal fixation in the treatment of fresh acromioclavicular joint dislocation.Methods:Thirty-nine patients with fresh acromioclavicular joint dislocation were included from January 2020 to January 2022. A total of 19 patients were treated with double Endobutton suspension internal fixation assisted by the domestic third-generation orthopaedic surgical robot (TiRobot ? 2.0) Dimensity system. There were Rockwood type III in 11 cases, type IV in 8 cases. Twenty cases were treated with conventional incision double Endobutton internal fixation, with Rockwood type III in 13 cases, type V in 7 cases. The operation duration, blood loss volume, incision length and hospitalization time were compared between the two groups. The following CT parameters of acromioclavicular joint at 2 days and 1 year after operation, distance between distal inferior cortex of clavicle and subacromial cortex, distance between upper and lower endobuttons, horizontal distance between anterior edge of distal clavicle and anterior edge of acromion and diameter of coracoid process and diameter of clavicular tunnel were measured. The visual analogue score (VAS), Constant-Murley shoulder function score and shoulder abduction activity were also evaluated before and at 12 months after operation. Results:The follow-up duration was 10.8±2.4 months in the robot group and 11.5±3.1 months in the routine group. The VAS score of the robot group decreased from 5.3±2.1 to 0.3±0.2 at 12 months after operation ( t=10.46, P=0.014). The Constant-Murley score increased from 55.6±6.4 to 92.0±4.2. The range of shoulder abduction increased from 42.2°±5.4° to 172.6°±6.1° ( t=17.24, P<0.001). The operation duation of the robot group was 74.4±6.6 min, which was longer than that of the conventional group 61.7±7.2 min ( t=5.43, P=0.037). There was no significant difference in VAS score, Constant-Murley score, shoulder abduction activity or CT measurement between the two groups ( P>0.05). During the follow-up, two cases in the robot group had cortical osteolysis on the supraclavicular surface, one case in the conventional group had loss of reduction, one case in the supraclavicular cortical osteolysis, and 4 cases in the cortical defect on the side of the coracoid process tunnel. Conclusion:Orthopedic robot-assisted and conventional incision with double Endobutton titanium plate internal fixation in treating fresh acromioclavicular joint dislocation can achieve satisfied early clinical effects. Accurate establishment of clavicle and coracoid bone tunnel assisted by robot can overcome the defects of bone tunnel deviation in conventional incision operation and can prevent reduction and bone loss. However, robot-assisted and conventional incision Endobutton internal fixation could enlarge bone tunnel.
RÉSUMÉ
@#Introduction: The acromioclavicular joint (ACJ) is a major link connecting the upper limb to the torso. The acromioclavicular and coracoclavicular (CC) ligaments help in stabilising the joint. We feel it is prudent to address both these ligament injuries, to achieve optimum result. This study was undertaken to analyse the results of a simple frugal surgical technique we used to deal with this injury considering stabilisation for both these ligaments. Materials and methods: In this retrospective study, skeletally mature patients with Type III, IV or V ACJ dislocations who underwent open reduction and stabilisation of the joint with temporary K-wires, repair of the capsule and augmentation of CC ligaments with suture anchors were included. Clinico-radiological and functional outcome was evaluated. Functional assessment of the upper limb was analysed using the Disabilities of Arm, Shoulder, and Hand Score (DASH), Constant shoulder score (CSS) and Oxford shoulder score (OSS). Results: Clinical and radiological evaluation of the 32 patients who had completed two years from the index surgery, was done. Out of the 37 patients included initially, five were lost in follow-up. Majority of the subjects included were males and type V was the most common injury. Mean pre-operative CC distance on the affected side was 13.92±4.94mm. In the immediate post-operative radiograph, it was 7.63±2.08mm and in the final follow- up was 9.36±2.75mm. Measurements were taken by two independent investigators and inter, and intra-observer reliability were analysed by Interclass correlation coefficient. Excellent functional outcome was noted despite the 1.81±1.50mm average loss of correction. At final followup, mean DASH score was 4.67±4.18, Oxford shoulder score was 44.06±2.44 and Constant shoulder score was 86.37±5.81. The severity of the injury had no significant effect on the functional outcome post our method of stabilisation and rehabilitation. Conclusion: Bifocal fixation restores the multidirectional stability of the disrupted ACJ. Adequate radiological reduction, good functional outcome and simplicity of execution make this technique an undemanding one for use in regular practice.
RÉSUMÉ
OBJECTIVE@#To evaluate the efficacy and prognosis of double button plate combined with strengthened anchor technique and clavicular hook plate internal fixation for complete acromioclavicular joint dislocation.@*METHODS@#From July 2017 to September 2020, a total of 42 patients with acromioclavicular joint dislocation treated by surgery were choosen as study objects and divided into observation group (21 cases) and control group (21 cases). In the observation group, there were 14 males and 7 females, aged 21 to 63 years old, with an average of (45.05±8.70) years old. In the control group, there were 16 males and 5 females, aged 25 to 68 years old, with an average of(45.00±9.44) years old. The patients in the observation group were treated with double button plate combined with strengthened anchor technique, whereas those in the control group received clavicular hook plate internal fixation. The two groups were compared in terms of operating time, intraoperative blood loss, postoperative hospital stay, shoulder pain(visual analogue scale, VAS) score, shoulder function Constant-Murley score and postoperative complications.@*RESULTS@#There was no significant difference between the two groups in intraoperative blood loss or postoperative hospital stay(P>0.05). The operating time of double button plate combined with strengthened anchor technique group (65.24±5.36) min was significantly longer than that of the clavicular hook plate group (48.81±4.72) min, and the difference was statistically significant (P<0.05). There was no significant difference in shoulder function or pain degree between the two groups before operation (P>0.05). After 1 month, 3 months and 6 months, the Constant-Murley score of the observation group was 73.29±2.15, 85.43±1.47, 93.86±1.24 separately, which were significantly higher than those of the control group;and the VAS score was 2.76±0.62, 1.71±0.64, 0.57±0.51 separately, which were significantly lower than those of the control group (P<0.05). One instance of shoulder discomfort was found in the observation group, while 5 cases of shoulder pain, 2 cases of restricted shoulder mobility, and 1 case of subacromial bone absorption were found in the control group. In both group, there was no loss of reduction.@*CONCLUSION@#In the treatment of complete acromioclavicular joint dislocation double button plate combined with strengthened anchor technique achieves favorable clinical result. Internal fixation does not need to be removed. The recovery of shoulder joint function and pain relief are superior than clavicular hook plate internal fixation, which is more worthy of clinical promotion.
Sujet(s)
Adulte , Sujet âgé , Femelle , Humains , Mâle , Adulte d'âge moyen , Jeune adulte , Articulation acromioclaviculaire/chirurgie , Plaques orthopédiques , Clavicule/chirurgie , Luxation de l'épaule/chirurgie , Résultat thérapeutiqueRÉSUMÉ
Objective To explore the morphology and the tissue structure of acromioclavicular joint. Methods Anatomical analysis was performed on 27 fresh adult cadavers and the morphology of the acromioclavicular joint was observed. The relevant bone structure and ligament parameters were measured, and the specimens were randomly divided into group A and group B. Group A reserved the acromioclavicular ligament and coracoclavicular ligament, and group B reserved only the acromioclavicular ligament. The difference in tension between the two groups was compared. Results The distance from the midpoint of the conical ligament to the distal end of the clavicle was (42.68 ± 6.34) mm, the width of the end point was (16.97 ± 4.28) mm, and the thickness of the center point was (5.39 ± 0.34) mm; the distance from the midpoint of the trapezoidal ligament to the clavicle was (20.35 mm ± 4.18) mm, the width of the end point was (10.35± 1.31) mm, the thickness of the center point was (5.19 ± 0.342) mm; the average vertical distance from the base of the coracoid process to the surface of the clavicle was 30.75 mm, and the mean coracoclavicular gap was 12.02 mm; the length of the central axis of the conical ligament was (15.68 ± 3.30) mm and the angle was (117.25 ± 10.80) °, while the length of the central axis of the trapezoidal ligament was (9.67 ± 2.25) mm, and the angle was (75.42± 11.37) °. The distance between the start joint of the trapezoidal ligament and the trapezium was (8.96± 3.00) mm, and the distance between the end points (13.09± 3.50) mm. The average tensile force of group A was higher than that of group B [(610.04 ± 51.24) N vs (560.41 ± 44.63) N, P < 0.05]. Conclusion During distal clavicular resection, the resection of the distal clavicle shall be within 10-30 mm. The depth shall not exceed 42 mm when drilling under the coracoid process. The reconstruction of the coracoclavicular ligament during acromioclavicular joint dislocation has an anatomical and biomechanical basis.
RÉSUMÉ
Abstract Objective To study the anatomy of the medial coracoclavicular ligament and assess the contribution of the acromioclavicular, coracoclavicular and medial coracoclavicular ligaments to the stability of the acromioclavicular joint. Methods Twenty-six shoulders from 16 fresh cadavers were dissected after placement in dorsal recumbency with a 15-cm cushion between the shoulder blades. An extended deltopectoral approach was performed proximally and medially, followed by plane dissection and ligament identification. The acromioclavicular and coracoclavicular distances were measured using points previously marked with a millimeter caliper. Six of these specimens were submitted to a biomechanical study. The acromioclavicular ligament, the coracoclavicular ligament and the medial coracoclavicular ligament were sectioned sequentially, and a cephalic force of 20 N was applied to the lateral clavicle. The acromioclavicular and coracoclavicular distances were measured in each of the ligament section stages. Results The right medial coracoclavicular ligament presented, on average, 48.9 mm in length and 18.3 mm in width. On the left side, its mean length was 48.65 mm, with a mean width of 17.3 mm. Acromioclavicular, coracoclavicular and medial coracoclavicular ligament section resulted in a statistically significant increase in the coracoclavicular distance and posterior scapular displacement. Conclusion The medial coracoclavicular ligament is a true ligamentous structure found in all dissected shoulders. Our results showed that the scapular protraction relaxed the medial coracoclavicular ligament, while scapular retraction tensioned it; in addition, our findings demonstrate that this ligament contributes to the vertical and horizontal stability of the acromioclavicular joint.
Resumo Objetivo Estudar a anatomia do ligamento coracoclavicular medial e avaliar a contribuição do ligamento acromioclavicular, coracoclaviculares e coracoclavicular medial na estabilidade da articulação acromioclavicular. Métodos Foram dissecados 26 ombros de 16 cadáveres frescos, posicionados em decúbito dorso-horizontal, com um coxim de 15 cm de altura entre as escápulas. Realizou-se uma via deltopeitoral estendida proximal e medialmente. Realizou-se dissecção por planos e identificação dos ligamentos. Realizou a medida da distância acromio-clavicular e coracoclavicular usando pontos previamente demarcados com paquímetro milimetrado. Em seis dessas amostras foi realizado estudo biomecânico. Seccionando, nesta ordem, o ligamento acromioclavicular, os coracoclaviculares e o ligamento coracoclavicular medial com uma força cefálica de 20N foi aplicada na clavícula lateral. Foi medida a distância acromio-clavicular e coracoclavicular em cada uma das etapas de secção dos ligamentos. Resultados A média de comprimento do ligamento coracoclavicular medial foi de 48,9mm e a média de largura, de 18,3mm no lado direito. No esquerdo, a média de comprimento foi de 48,65mm e a média da largura, 17,3mm. Após a secção dos ligamentos acromioclaviculares, coracoclaviculares, com a secção do ligamento coracoclavicular medial houve aumento estatisticamente significativo da distância córaco-clavicular e um deslocamento posterior da escápula. Conclusão O ligamento coracoclavicular medial é uma estrutura ligamentar verdadeira, presente em todos os ombros dissecados. Nossos resultados demonstraram que o ligamento coracoclavicular medial encontra-se relaxado com a escápula em protração e tenso com a escápula em retração e segundo nossos resultados participa tanto da estabilidade vertical quanto da estabilidade horizontal da articulação acromioclavicular.