Effect of dental distance from implant and MAR algorithm on the detection of vertical root fracture in CBCT images

Three-dimensional cone-beam computed tomography (CBCT) has an important role in the detection of vertical root fractures (VRFs). The effect of artifact generation by high-density objects like dental implants on image quality was well documented. This study aimed to assess the effect of tooth-implant distance and the application of metal artifact reduction (MAR) algorithm on the detection of VRFs on CBCT scans. This study was conducted on 20 endodontically treated single-rooted teeth. VRFs were induced in 10 teeth, while the other 10 remained intact. The implant was inserted in the right second premolar socket area, and two teeth were inserted in right canine and right first premolar sockets area randomly and underwent CBCT with and without the application of MAR algorithm. SPSS 21 was used to analyze the results (alpha=0.05). According to the findings of this study, all four variables of sensitivity, specificity, accuracy, and positive predictive values in diagnosis were higher in cases without MAR software at both close(roots in first premolar sockets) and far distances (roots in canine sockets) from the implant. However, the highest rate of diagnosis accuracy of the first and second radiologists was in the far distance group from the implant without MAR, and the lowest rate of diagnosis accuracy in the first and second radiologists was in the close distance to the implant. Applying MAR algorithm had no positive effect on detection of VRFs on CBCT scans in both close and distant scenarios.

La tomografía computarizada de haz cónico tridimensional (CBCT) tiene un papel importante en la detección de fracturas radiculares verticales (VRF). El efecto de la generación de artefactos por objetos de alta densidad como los implantes dentales en la calidad de la imagen está bien documentado. Este estudio tuvo como objetivo evaluar el efecto de la distancia entre el diente y el implante y la aplicación del algoritmo de reducción de artefactos metálicos (MAR) en la detección de VRF en escaneos CBCT. Este estudio se realizó en 20 dientes uniradiculares tratados endodónticamente. Se indujeron VRF en 10 dientes, mientras que los otros 10 permanecieron intactos. El implante se insertó en el área del alveolo del segundo premolar derecho, y dos dientes se insertaron en el canino derecho y en el área del alvéolo del primer premolar derecho al azar y se sometieron a CBCT con y sin la aplicación del algoritmo MAR. Se utilizó SPSS 21 para analizar los resultados (alfa=0,05). De acuerdo con los hallazgos de este estudio, las cuatro variables de sensibilidad, especificidad, precisión y valores predictivos positivos en el diagnóstico fueron más altas en los casos sin el software MAR tanto en distancias cercanas (raíces en las cavidades de los primeros premolares) como lejanas (raíces en las cavidades de los caninos) del implante. Sin embargo, la tasa más alta de precisión diagnóstica del primer y segundo radiólogo fue en el grupo de mayor distancia al implante sin MAR, y la tasa más baja de precisión diagnóstica en el primer y segundo radiólogo fue en la distancia cercana al implante. La aplicación del algoritmo MAR no tuvo un efecto positivo en la detección de VRF en escaneos CBCT en escenarios cercanos y distantes.

Corrección del artefacto producido en imágenes tomográficas en equipos odontológicos / Correction of the artifact produced in tomographic images in dental equipment

Objetivo: disminuir el efecto de artefacto que generan objetos de alta densidad mediante la utilización de filtros de distintos materiales y espesores, ubicados en lugares estratégicos del tomógrafo. Material y métodos: se utilizaron filtros de aluminio y de cobre ubicados en lugares estratégicos en el equipo tomográfico. Se realizaron cortes oblicuos en piezas dentarias con restauraciones metálicas y en implantes; se midió la extensión del artefacto en ancho y alto en cada adquisición tomográfica. Resultados: se hallaron diferencias significativas respecto a la disminución de la dispersión de acuerdo con cada filtro con respecto a la no utilización de estos elementos. Conclusión: la utilización de filtros logró disminuir el efecto de artefacto en estructuras de alta densidad, obteniendo una mejor calidad de imagen para el diagnóstico, permitiendo que el software pueda reconstruir una imagen real (AU)

Objective: to diminish the artifact effect generated by high density objects by using filters of different materials and thickness, located in strategic places of the tomograph. Material and methods: aluminum and copper filters located in strategic places in the tomographic equipment were used. Oblique cuts were made on dental pieces with metal restorations and implants; the extension of the artifact in width and height was measured in each tomographic acquisition. Results: significant differences were found regarding the decrease of the dispersion according to each filter with respect to the non-use of these elements. Conclusion: the use of filters achieves to diminish the artifact effect in structures of high density, obtaining a better image quality for the diagnosis, allowing the software to reconstruct a real image (AU)

Application of deep learning image reconstruction algorithm in low-dose abdominal CT / 西安交通大学学报(医学版)

【Objective】 To investigate the value of deep learning image reconstruction (DLIR) in improving image quality and reducing beam-hardening artifacts of low-dose abdominal CT. 【Methods】 For this study we prospectively enrolled 26 patients (14 males and 12 females, mean age of 60.35±10.89 years old) who underwent CT urography between October 2019 and June 2020. All the patients underwent conventional-dose unenhanced CT and contrast-enhanced CT in the portal venous phase (noise index of 10; volume computed tomographic dose index: 9.61 mGy) and low-dose CT in the excretory phase(noise index of 23; volume computed tomographic dose index: 2.95 mGy). CT images in the excretory phase were reconstructed using four algorithms: ASiR-V 50%, DLIR-L, DLIR-M, and DLIR-H. Repeated measures ANOVA and Kruskal-Wallis H test were used to compare the quantitative (skewness, noise, SNR, CNR) and qualitative (image quality, noise, beam-hardening artifacts) values among the four image groups. Post hoc comparisons were performed using Bonferroni test. 【Results】 In either quantitative or qualitative evaluation, the SNR, CNR, overall image quality score, and noise of DLIR images were similar or better than ASiR-V 50%. In addition, the SNR, CNR, and overall image quality scores increased as the DLIR weight increased, while the noise decreased. There was no statistically significant difference in the distortion artifacts (P=0.776) and contrast-induced beam-hardening artifacts (P=0.881) scores among these groups. 【Conclusion】 Compared with the ASiR-V 50% algorithm, DLIR algorithm, especially DLIR-M and DLIR-H, can significantly improve the image quality of low-dose abdominal CT, but has limitations in reducing contrast-induced beam-hardening artifacts.

Digital X-ray Machine Carestream DRX-NOVA Fault Maintenance / 中国医疗器械杂志

OBJECTIVE@#To analyze the malfunction and maintenance process of Carestream digital X-ray machine DRX-NOVA for reference.@*METHODS@#The fault of Carestream digital X-ray machine DRX-NOVA in 2011-2021 was summarized, the fault types were classified, and the maintenance process was summarized.@*RESULTS@#Fault types can be divided into three categories, each of which has its own characteristics and specific solutions.@*CONCLUSIONS@#It is necessary to master the principle of equipment to repair all kinds of equipment failures. Repair the machine should be careful, comprehensive consideration of the cause of the failure. To correctly understand and analyze the operation of the machine under normal conditions, we can accurately analyze the cause of failure, so that we can really solve the problem.

Anti-motion Artifact Performance Test System for Ambulatory ECG Monitoring Equipment / 中国医疗器械杂志

Anti-motion artifact is one of the most important properties of ambulatory ECG monitoring equipment. At present, there is a lack of standardized means to test the performance of anti-motion artifact. ECG simulator and special conductive leather are used to build the simulator, it is used to simulate human skin, to generate ECG signal input for the ECG monitoring equipment attached to it. The mechanical arm and fixed support are used to build a motion simulation system to fix the conductive leather. The mechanical arm is programmed to simulate various motion states of the human body, so that the ECG monitoring equipment can produce corresponding motion artifacts. The collected ECG signals are read wirelessly, observed, analyzed and compared, and the anti-motion artifact performance of ECG monitoring equipment is evaluated. The test results show that by artificially creating the small difference between the two groups of ambulatory ECG monitoring equipment, the system can accurately test the interference signals introduced under the conditions of controlled movement such as tension and torsion, and compare the advantages and disadvantages. The research shows that the test system can provide convenient and accurate verification means for the research of optimizing anti-motion interference.

Influence of endodontic sealers artifacts in the detection of vertical root fractures

Abstract The aim of this study was to compare the influence of endodontic sealers artifacts on the detection of vertical root fracture in cone beam computed tomography (CBCT). Premolars and central incisors were assigned into five different groups: Control, Pulp Canal Sealer, AH Plus, Sealer 26, and BC Sealer (n= 10, per group). VRFs were mechanically induced and the teeth were inserted into an image phantom. Subsequently, CBCT (Cranex 3Dx, Soredex, Tuusula, Finland) images were obtained and two observers were asked separately to identify root fracture, by visual analysis. For both premolar and central incisors, kappa coefficients of intraobserver agreement varied from good to excellent (K: 80% - 87%), and the values for interobserver agreement varied from fair to moderate (K: 30% - 35%). As follows, the area under the curve (AUC) of receiver operating characteristic (ROC) values for VRFs highlighted that the use of BC sealer reduced the observers' ability to discriminate VRFs relative to other sealers. Moreover, sensitivity values for premolars teeth ranged from 20% to 60%, and specificity ranged from 60% to 100%; while sensitivity values for central incisors ranged from 30% to 70%, and specificity ranged from 70% to 100%. In conclusion, the low sensitivity values, mainly for premolars, demonstrated the difficulty in VRF diagnosis. Furthermore, BC Sealer induced significantly more imaging artifacts than other sealers. These results highlighting that endodontic sealers may interfere with the diagnosis of VRFs.

Resumo O objetivo deste estudo foi comparar a influência dos artefatos de cimentos endodônticos na detecção de fratura radicular vertical (FRV) em tomografia computadorizada de feixe cônico (TCFC). Pré-molares e incisivos centrais foram divididos em cinco grupos diferentes: Controle, Pulp Canal Sealer, AH Plus, Sealer 26 e BC Sealer (n = 10, por grupo). As FRVs foram induzidas mecanicamente e os dentes inseridos em uma réplica da mandibula humana. Posteriormente, imagens de TCFC (Cranex 3Dx, Soredex, Tuusula, Finlândia) foram obtidas e dois observadores foram solicitados a identificar fratura radicular separadamente, o critério utilizado foi a análise visual. Tanto para pré-molares quanto para incisivos centrais, os coeficientes kappa de concordância intraobservador variaram de bom a excelente (K: 80% - 87%), e os valores de concordância interobservador variaram de regular a moderado (K: 30% - 35%). A seguir, a área sob a curva (AUC) dos valores da característica de operação do receptor (ROC) para FRVs destacou que o uso do cimento BC Sealer reduziu a capacidade dos observadores de discriminar FRVs em relação a outros cimentos endodônticos. Além disso, os valores de sensibilidade para pré-molares variaram de 20% a 60%, e a especificidade variou de 60% a 100%; enquanto os valores de sensibilidade para incisivos centrais variaram de 30% a 70%, e a especificidade variou de 70% a 100%. Em conclusão, os baixos valores de sensibilidade, principalmente para pré-molares, demonstraram uma dificuldade no diagnóstico de FRV. Além disso, o BC Sealer induziu significativamente mais artefatos de imagem do que outros cimentos. Esses resultados evidenciam que os cimentos endodônticos podem interferir no diagnóstico das FRVs.

Automatic removal algorithm of electrooculographic artifacts in non-invasive brain-computer interface based on independent component analysis / 生物医学工程学杂志

The non-invasive brain-computer interface (BCI) has gradually become a hot spot of current research, and it has been applied in many fields such as mental disorder detection and physiological monitoring. However, the electroencephalography (EEG) signals required by the non-invasive BCI can be easily contaminated by electrooculographic (EOG) artifacts, which seriously affects the analysis of EEG signals. Therefore, this paper proposed an improved independent component analysis method combined with a frequency filter, which automatically recognizes artifact components based on the correlation coefficient and kurtosis dual threshold. In this method, the frequency difference between EOG and EEG was used to remove the EOG information in the artifact component through frequency filter, so as to retain more EEG information. The experimental results on the public datasets and our laboratory data showed that the method in this paper could effectively improve the effect of EOG artifact removal and improve the loss of EEG information, which is helpful for the promotion of non-invasive BCI.

Laplace-Based Interpolation Method in Reduction of Metal Artifact in Computed Tomography Imaging

@#Introduction: Metal artifacts can degrade the image quality of computed tomography (CT) images which lead to errors in diagnosis. This study aims to evaluate the performance of Laplace interpolation (LI) method for metal artifacts reduction (MAR) in CT images in comparison with cubic spline (CS) interpolation. Methods: In this study, the proposed MAR algorithm was developed using MATLAB platform. Firstly, the virtual sinogram was acquired from CT image using Radon transform function. Then, dual-adaptive thresholding detected and segmented the metal part within the CT sinogram. Performance of the two interpolation methods to replace the missing part of segmented sinogram were evaluated. The interpolated sinogram was reconstructed, prior to image fusion to obtain the final corrected image. The qualitative and quantitative evaluations were performed on the corrected CT images (both phantom and clinical images) to evaluate the effectiveness of the proposed MAR technique. Results: From the findings, LI method had successfully replaced the missing data on both simple and complex thresholded sinogram as compared to CS method (p-value = 0.17). The artifact index was significantly reduced by LI method (p-value = 0.02). For qualitative analysis, the mean scores by radiologists for LI-corrected images were higher than original image and CS-corrected images. Conclusion: In conclusion, LI method for MAR produced better results as compared to CS interpolation method, as it worked more effective by successfully interpolated all the missing data within sinogram in most of the CT images.

Application of isotropic MAVRIC-SL sequence in metal artifact reduction after lateral lumbar interbody fusion / 中华放射学杂志

Objective:To compare the quality and diagnostic utility of the three sequences including fast spin echo (FSE), multi-acquisition variable resonance image combination selective (MAVRIC-SL), and isotropic MAVRIC-SL (iso MAVRIC-SL), in evaluating the intervertebral foramen and spinal canal in patients after lateral lumbar interbody fusion (LLIF).Methods:Totally 30 patients after LLIF were enrolled prospectively from May to June 2020 in the Second Hospital of Shanxi Medical University. The patients underwent MRI of the lumbar spine including sagittal MAVRIC-SL and iso MAVRIC-SL sequence three-dimensional volume imaging, and the axial spinal canal level images were reconstructed. FSE sequence sagittal T 1WI and axial T 2WI images were acquired simultaneously. The sagittal and axial images were subjectively graded for visualization of the intervertebral foramen and spinal canal. The artifact area and SNR were measured. The Friedman M test was used to compare the differences in image quality scores, artifact area and SNR among the three sequences. Results:Nonparametric test results showed significant differences in sagittal and axial image quality scores among the three sequences (both P<0.001). Sagittal image quality scores of MAVRIC-SL [4 (4, 4) points] and iso MAVRIC-SL [4 (4, 4) points] were higher than those of FSE T 1WI sequence [3 (3, 3) points, both P<0.001]. The quality scores of MAVRIC-SL and iso MAVRIC-SL showed no significant differences ( P=1.000). The axial image quality score of iso MAVRIC-SL[5 (5, 5) points] were higher than those of MAVRIC-SL [4 (4, 4) points] and FSE T 2WI [3 (3, 3) points, both P<0.05]. The iso MAVRIC-SL images enabled a significantly improved reduction in the artifact area and SNR compared to the MAVRIC-SL and FSE sequence (all P<0.05). Conclusion:The iso MAVRIC-SL acquisitions enhance visualization of the intervertebral foramen and spinal canal and decrease metal artifacts compared with MAVRIC-SL and FSE acquisitions.

Progress of motion artifact correction in photoacoustic microscopy and photoacoustic tomography / 生物医学工程学杂志

Photoacoustic imaging (PAI) is a rapidly developing hybrid biomedical imaging technology, which is capable of providing structural and functional information of biological tissues. Due to inevitable motion of the imaging object, such as respiration, heartbeat or eye rotation, motion artifacts are observed in the reconstructed images, which reduce the imaging resolution and increase the difficulty of obtaining high-quality images. This paper summarizes current methods for correcting and compensating motion artifacts in photoacoustic microscopy (PAM) and photoacoustic tomography (PAT), discusses their advantages and limits and forecasts possible future work.

Gout of feet and ankles in different disease durations: diagnostic value of single-source DECT and evaluation of urate deposition with a novel semi-quantitative DECT scoring system

Abstract Objectives: To investigate the diagnostic performance of single-source dual-energy computed tomography (DECT) based on gemstone spectral imaging technology (including Discovery CT750HD and Revolution CT) in patients with suspected feet/ankles gouty arthritis, and evaluate the urate deposition with a novel semi-quantitative DECT scoring system. Methods: A total of 196 patients were consecutively included. Feet and ankles were evaluated in all patients by single-source DECT scan. The 2015 EULAR/ACR criteria were used as the reference for the diagnosis of gout. The sensitivity, specificity, and area under the receiver operating characteristic curve (AUC) of DECT for the diagnosis of gout in the early (≤1 year), middle (1-3 years), and late (> 3 years) disease durations were calculated. Besides, a novel semi-quantitative DECT scoring system was assessed for the measurement of urate deposition, and the correlation between the scores and the clinical and serological data were also evaluated. Moreover, the influences of artifacts on the diagnostic performance of DECT were also determined. Results: The sensitivity, specificity, and AUC of DECT in 196 patients were 38.10, 96.43%, and 0.673 in the early-stage group; 62.96, 100.00%, and 0.815 in the middle-stage group; and 77.55, 87.50%, and 0.825 in the late-stage group, respectively. The overall diagnostic accuracies in the AUC of DECT (Discovery CT750HD and Revolution CT) in the middle and late stages of gout were higher than that in the early stage of gout. Besides, the monosodium urate crystals were deposited on the first metatarsophalangeal joints and ankles/midfeet. Age, the presence of tophus, bone erosion, and disease duration considerably affected the total urate score. No statistical difference in the positive detection of nail artifact, skin artifact, vascular calcification, and noise artifact was found between the case and control groups. Conclusion: DECT (Discovery CT750HD and Revolution CT) showed promising diagnostic accuracy for the detection of urate crystal deposition in gout but had limited diagnostic sensitivity for short-stage gout. Longer disease duration, the presence of tophus, and bone erosion were associated with the urate crystal score system. The artifacts do not remarkably affect the diagnostic performance of DECT in gout.

Improvement of metallic artifacts in computed tomography in the absence of artifact reduction algorithms for spinal treatment planning applications

Aim of Study: The goal of this research was to investigate if application of optimized imaging parameters, recommended in literature, would be effective in producing the image quality required for treatment planning of spinal radiation fields with metallic implants. Materials and Methods: CT images from an anthropomorphic torso phantom with and without spinal implants were acquired using different imaging protocols: raising kVp and mAs, reducing the pitch and applying an extended CT scale (ECTS) technique. Profiles of CT number (CT#) were produced using DICOM data of each image. The effect of artifact on dose calculation accuracy was investigated using the image data in the absence of implant as a reference and the recommended electron density tolerance levels (Δρe). Results: Raising the kVp was the only method that produced improvement to some degree in CT# in artifact regions. Application of ECTS improved CT# values only for metal. Conclusions: Although raising the kVp was effective in reducing metallic artifact, the significance of this effect on Δρe values in corrected images depends on the required tolerance for treatment planning dose calculation accuracy. ECTS method was only successful in correcting the CT number range in the metal. Although, application of ECTS method did not have any effect on artifact regions, its use is necessary in order to improve delineation of metal and accuracy of attenuation calculations in metal, provided that the treatment planning system can use an extended CT# calibration curve. Also, for Monte Carlo calculations using patient's images, ECTS-post-processed-CT images improve dose calculation accuracy for impure metals

Perceived Dark Rim Artifact in First-Pass Myocardial Perfusion Magnetic Resonance Imaging Due to Visual Illusion

OBJECTIVE: To demonstrate that human visual illusion can contribute to sub-endocardial dark rim artifact in contrast-enhanced myocardial perfusion magnetic resonance images.MATERIALS AND METHODS: Numerical phantoms were generated to simulate the first-passage of contrast agent in the heart, and rendered in conventional gray scale as well as in color scale with reduced luminance variation. Cardiac perfusion images were acquired from two healthy volunteers, and were displayed by the same gray and color scales used in the numerical study. Before and after k-space windowing, the left ventricle (LV)-myocardium boarders were analyzed visually and quantitatively through intensity profiles perpendicular the boarders.RESULTS: k-space windowing yielded monotonically decreasing signal intensity near the LV-myocardium boarder in the phantom images, as confirmed by negative finite difference values near the board ranging −1.07 to −0.14. However, the dark band still appears, which is perceived by visual illusion. Dark rim is perceived in the in-vivo images after k-space windowing that removed the quantitative signal dip, suggesting that the perceived dark rim is a visual illusion. The perceived dark rim is stronger at peak LV enhancement than the peak myocardial enhancement, due to the larger intensity difference between LV and myocardium. In both numerical phantom and in-vivo images, the illusory dark band is not visible in the color map due to reduced luminance variation.CONCLUSION: Visual illusion is another potential cause of dark rim artifact in contrast-enhanced myocardial perfusion MRI as demonstrated by illusory rim perceived in the absence of quantitative intensity undershoot.

Accuracy of target bone segments in personalized differential modeling and simulation of ct scanning parameters at fracture end / 中国组织工程研究

BACKGROUND: CT scan and differential modeling are used to analyze the fracture end, which is an effective method to judge the degree of bone healing. To obtain the high precision of differential modeling and simulation, how to select the optimal CT scanning parameters needs further research and analysis. OBJECTIVE: To compare the effects of different CT scanning parameters on modeling accuracy in personalized differential modeling analysis, to verify the accuracy and effectiveness of personalized differential modeling in the reduction of simulated target bone segments, and to explore the research value of this method in judging the degree of bone healing of long canals of lower extremities. METHODS: The model of internal fixation was established with porcine femur. Four groups of 80 kV-300 mA (group A-low dose), 120 kV-335 mA (group B-automatic tube current control system), 140 kV-300 mA (group C-manual setting comparison) and 140 kV-80 mA (group D-high kV and low mA) were used to scan the same object with the same pitch, slice thickness and environment. The scanning data of each group were selected, the same CT value range was used, and the differential modeling analysis method was used to model the target bone segment. The average area and maximum area of metal artifacts in CT scanning images, the average CT value, volume and maximum wall thickness peak after differential modeling analysis, the radiation amount under four groups of scanning conditions were compared to determine the reduction of metal artifacts, modeling accuracy and radiation, so as to select the optimal CT scanning parameters. RESULTS AND CONCLUSION: (1) Artifact measurement method results: In group A, there were many metal artifacts, which obviously obstructed bone tissue, and had a possibility of missed diagnosis. In group D, there were minimal metal artifacts, less occlusion around bone tissue, but poor image contrast and high fog. The difference between group B and group C lay in the clarity of images, and the accuracy of diagnosis was basically the same. Therefore, the order of artifact size was as follows: group A > group B > group C > Group D. (2) Differential modeling analysis results: In group B, because of the smaller artifact and less loss of CT value, the simulated model was more close to the reality. Moreover, group B adopted the automatic tube current control system, which could obviously show that the radiation amount was smaller and more protective for patients. (3) It is confirmed that the CT scan under the condition of group B can effectively reduce the interference caused by metal artifacts, better retain the original information of CT gray value, and retain the density information of the target bone segment to the maximum extent. Therefore, when establishing differential modeling, the CT automatic tube current control system is used as the optimal CT scanning parameter, which not only improves the simulation accuracy of personalized differential modeling, but also increases the accuracy of calculation.

Comparison of the two magnetic resonance deartifact techniques in imaging of different porcelain-fused-to-metal crowns / 华西口腔医学杂志

OBJECTIVE@#This study aimed to compare the porcelain-fused-to-metal (PFM) crown artifact in the magnetic resonance imaging (MRI) of the two magnetic resonance deartifact techniques in studying the application value of the propeller-fast spin-echo T2-weighted sequence (FSE T2WI) in troubleshooting PFM crown artifacts.@*METHODS@#A total of 48 patients with right mandible first molar crown who underwent MRI head examination were chosen as subjects in the study. According to different metal substrates, PFM crowns were divided to three types, namely, nickel-chromium alloy crown, cobalt-chromium alloy crown and titanium crown. The patients received two MRI scan sequences, that is, FSE T2WI and propeller-FSE T2WI sequences. The MRI artifacts areas in two sequences were measured.@*RESULTS@#The difference between FSE T2WI and propeller-FSE T2WI sequences in three kinds of PFM crown was significant (P<0.05).@*CONCLUSIONS@#Propeller-FSE T2WI sequence technique can effectively reduce the metal artifacts of various PFM crowns.

High-quality reconstruction of four-dimensional cone beam CT from motion registration prior image / 南方医科大学学报

Four-dimensional cone beam CT (4D-CBCT) imaging can provide accurate location information of real-time breathing for imaging-guided radiotherapy. How to improve the accuracy of 4D-CBCT reconstruction image is a hot topic in current studies. PICCS algorithm performs remarkably in all 4D-CBCT reconstruction algorithms based on CS theory. The improved PICCS algorithm proposed in this paper improves the prior image on the basis of the traditional PICCS algorithm. According to the location information of each phase, the corresponding prior image is constructed, which completely eliminates the motion blur of the reconstructed image caused by the mismatch of the projection data. Meanwhile, the data fidelity model of the proposed method is consistent with the traditional PICCS algorithm. The experimental results showed that the reconstructed image using the proposed method had a clearer organization boundary compared with that of images reconstructed using the traditional PICCS algorithm. This proposed method significantly reduced the motion artifact and improved the image resolution.

Current progress of photoplethysmography and SPO 2 for health monitoring

A photoplethysmograph (PPG) is a simple medical device for monitoring blood fl ow and transportation of substances in the blood. It consists of a light source and a photodetector for measuring transmitted and refl ected light signals. Clinically, PPGs are used to monitor the pulse rate, oxygen saturation, blood pressure, and blood vessel stiff ness. Wearable unobtrusive PPG monitors are commercially available. Here, we review the principle issues and clinical applications of PPG for monitoring oxygen saturation.

Comet tail artifact on ultrasonography: is it a reliable finding of benign gallbladder diseases?

PURPOSE: The aim of this study was to evaluate whether the comet tail artifact on ultrasonography can be used to reliably diagnose benign gallbladder diseases. METHODS: This retrospective study reviewed the clinical findings, imaging findings, preoperative ultrasonographic diagnoses, and pathological diagnoses of 150 patients with comet tail artifacts who underwent laparoscopic cholecystectomy with pathologic confirmation. The extent of the involved lesion was classified as localized or diffuse, depending on the degree of involvement and the anatomical section of the gallbladder that was involved. This study evaluated the differences in clinical and imaging findings among pathologic diagnoses. RESULTS: All gallbladder lesions exhibiting the comet tail artifact on ultrasound examination were confirmed as benign gallbladder diseases after cholecystectomy, including 71 cases of adenomyomatosis (47.3%), 74 cases of chronic cholecystitis (49.3%), two cases of xanthogranulomatous cholecystitis (1.3%), and three cases of cholesterolosis (2.0%); there were two cases of coexistent chronic cholecystitis and low-grade dysplasia. There were no statistically significant differences in any of the clinical and ultrasonographic findings, with the exception of gallstones (P=0.007), among the four diseases. There were no significant differences in the average length, thickness, or number of comet tail artifacts among the four diagnoses. No malignancies were detected in any of the 150 thickened gallbladder lesions. CONCLUSION: The ultrasonographic finding of the comet tail artifact in patients with thickened gallbladder lesions is associated with the presence of benign gallbladder diseases, and can be considered a reliable sign of benign gallbladder disease.

The “Lip Sign” in MRI of the Spinal Cord

No abstract available.

Effect of CT artifact on calculation of radiotherapy dose / 中华放射医学与防护杂志

Objective@#To investigate the effect of simple artifacts on the calculation of radiation dose in actual clinical operations by the aid of artificially caused CT artifacts.@*Methods@#The phantom was scanned using CT before and after replacing the titanium alloy component. Then, the CT values were measured at different distances before and after replacement. After correcting the CT value of the titanium alloy region to the CT value of the water phantom, the doses to the phantom were calculated by using Varian′s AAA algorithm, AXB algorithm and Pinnacle system′s CCC algorithm. The absolute dose values at different distances were furtherly analyzed.@*Results@#Varian system was consistent with Pinnacle system in evaluating the CT values. When the CT value deviated by less than 30 HU for a uniform phantom, the dose deviations of the three different algorithms were within 6.0 %-12.0 % at a distance of 0.5 cm from the body surface, and less than 1.0% at a distance of more than 1.5 cm from the body surface. When the CT value deviated by 15 HU for the lung phantom, both Varian′s AAA algorithm and Varian′s AXB algorithm showed about 1.0% dose deviation. However, the CCC algorithm of the Pinnacle system had a significant difference (5.0%) in dose values under the same conditions.@*Conclusions@#CT artifacts have noticeable effects on the calculation of radiation dose and change tissue dose distribution which may result in insufficient or excessive exposure doses.