Effect of refining and pressing temperature on chemical attributes of canola oil produced in Chile

The consumption of vegetable oils is common in our daily diet. Rapeseed oil (canola oil) is the third most consumed edible oil in the world, followed by palm and soybean oils in terms of production. Rapeseed oil has a low proportion of saturated fatty acids, while it is rich in unsaturated fatty acids, as well as in healthy compounds such as phenols, tocopherols, phytosterols, carotenoids, and fat-soluble vitamins. However, processing technologies affect the content and functional activities of bioactive compounds in the oil. Aim: To assess any potential effect of hot or cold pressing and a refining process on the nutritional value and the profile of several bioactive compounds in canola oils produced in Chile. Methods: Canola oils were characterized regarding their fatty acid profile, phytosterol and tocopherol composition, total phenol content, and antioxidant activity, according to the mode of extraction (cold or hot pressed) and before and after bWeing subjected to a refining process. Results: Fatty acid profiles were not significantly different in any of the analyzed canola oils. Refining but not temperature extraction led to a sharp decrease of phytosterols and tocopherols. Hot pressing significantly increased the amount of total phenols (3.1 times) and the antioxidant activity measured by ORAC (3.1 times) and DPPH (8.3 times) compared to the cold extraction. However, phenolic concentration and antioxidant capacity decreased after refining. Conclusions: Refining processes should be adjusted to reduce the loss of bioactive compounds in the oil.

El consumo de aceites vegetales es habitual en nuestra dieta diaria. El aceite de colza (aceite de canola) es el tercer aceite comestible más consumido en el mundo, seguido por los aceites de palma y soja en términos de producción. El aceite de colza tiene una baja proporción de ácidos grasos saturados, mientras que es rico en ácidos grasos insaturados, así como en compuestos liposolubles saludables como fenoles, tocoferoles, fitoesteroles, carotenoides y vitaminas. Sin embargo, las tecnologías de procesamiento afectan el contenido y las actividades funcionales de los compuestos bioactivos en el aceite. Objetivo: Evaluar cualquier efecto potencial del prensado en caliente o en frío y un proceso de refinación sobre el valor nutricional y el perfil de varios compuestos bioactivos en los aceites de canola producidos en Chile. Métodos: Los aceites de canola se caracterizaron en cuanto a su perfil de ácidos grasos, composición de fitoesteroles y tocoferoles, contenido de fenoles totales y actividad antioxidante, según el modo de extracción (prensado en frío o en caliente) y antes y después de ser sometidos a un proceso de refinación. Resultados: Los perfiles de ácidos grasos no fueron significativamente diferentes en ninguno de los aceites de canola analizados. La refinación, pero no la extracción en caliente, condujo a una fuerte disminución de los fitoesteroles y tocoferoles. El prensado en caliente aumentó significativamente la cantidad de fenoles totales (3,1 veces) y la actividad antioxidante medida por ORAC (3,1 veces) y DPPH (8,3 veces) en comparación con la extracción en frío. Sin embargo, la concentración de fenoles y la capacidad antioxidante disminuyeron después del refinado. Conclusión: Los procesos de refinación deben ajustarse para reducir la pérdida de compuestos bioactivos en el aceite.

Validação biológica de grânulos de vidro bioativas (compostos por biovidro 45S5): estudo in vitro e in vivo / Biological validation of bioactive glass granules (composed of 45S5 bioglass): in vitro and in vivo study

O tecido ósseo, embora tenha a capacidade de regeneração, é limitado em sua eficácia diante de defeitos críticos que impedem a regeneração natural. Dessa forma, materiais como a hidroxiapatita (HA) têm sido considerados promissores na engenharia de tecido ósseo. Contudo, apesar de sua ampla utilização, a hidroxiapatita apresenta desvantagens, como a taxa de reabsorção e remodelação lenta. Em contraste, o biovidro 45S5 se destaca por sua biocompatibilidade, propriedades bioativas e degradabilidade. Este estudo objetivou avaliar o comportamento biológico in vitro e in vivo de grânulos de vidro bioativas de biovidro 45S5 fabricadas pelo método de fusão. Os biovidros foram caracterizados por meio da difração de raios X (DRX), espectroscopia de infravermelho por transformação de Fourier (FTIR), calorimetria diferencial de varredura (DSC) e espectrometria de emissão óptica com plasmas indutivamente acoplados (ICP OES). Em seguida, foi realizado o estudo in vitro, utilizando células osteoblásticas isoladas de fêmures de ratos, que foram submetidas a análise da morfologia celular (MEV), viabilidade celular (MTT), conteúdo de proteína total (PT), atividade de fosfatase alcalina (ALP) e formação de nódulos de mineralização. No estudo in vivo, foram realizados defeitos ósseos críticos de 7 mm na tíbia de coelhos da raça New Zealand, que foram divididos em dois grupos (n=6) de acordo com o material de preenchimento: hidroxiapatita comercial (HA) e biovidro 45S5 (BG45S5). Após 2, 8 e 12 semanas, os animais foram eutanasiados e as peças ósseas foram submetidas as análises histológicas e histomorfométricas. Os dados foram submetidos ao teste de normalidade Shapiro-Wilk (p=0,05) e quando normais realizamos o teste t de student e quando não normais realizamos o teste de Mann-Whitney. Os resultados dos testes físico-químicos mostraram sucesso na produção do novo biomaterial. Nos testes in vitro, observou-se que o grupo BG45S5 não apresentou citotoxicidade e mostrou-se promissor com diferença estatisticamente significante em relação ao grupo hidroxiapatita comercial (p=0.0263). Nos testes de PT, ALP e nódulos de mineralização, os grupos não apresentaram diferença estatística entre eles (p<0,05). Contudo, o grupo BG45S5 mostrou-se promissor em relação aos outros grupos. Na análise histológica, ambos os grupos apresentaram neoformação óssea nos defeitos após 2, 8 e 12 semanas. Na histomorfometria, observou-se que os grupos BG45S5 e HA apresentaram maior área de neoformação óssea em 12 semanas. Houve diferença estatisticamente significante entre os grupos no tempo de 2 semanas, com maior neoformação para o grupo BG45S5. Apesar dos resultados promissores do grupo BG45S5, não houve diferença estatisticamente significativa entre os grupos (p<0,05) nos tempos de 8 e 12 semanas. Em resumo, os resultados evidenciaram o sucesso na produção do biomaterial sintético e o potencial do biomaterial BG45S5 como um material promissor para tratamento de defeitos ósseos críticos. (AU)

Bone tissue, despite its capacity of regeneration, is limited in its effectiveness when faced with critical defects that prevent natural regeneration. Therefore, materials such as hydroxyapatite (HA) have been considered promising in bone tissue engineering. However, despite its wide use, hydroxyapatite has disadvantages, such as slow resorption and remodeling rates. In contrast, 45S5 bioglass stands out for its biocompatibility, bioactive properties and degradability. This study aimed to evaluate the in vitro and in vivo biological behavior of bioactive 45S5 bioglass beads manufactured by the melt quenched method. The bioglasses were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and inductively coupled plasma optical emission spectrometry (ICP OES). Following this, an in vitro study was conducted using osteoblastic cells isolated from rat femurs, which were subjected to analysis of cell morphology (SEM), cell viability (MTT), total protein content (TP), alkaline phosphatase activity (ALP) and mineralization nodule formation. In the in vivo study, critical bone defects of 7 mm were created in the tibia of New Zealand rabbits, which were divided into two groups (n=6) according to the filling material: commercial hydroxyapatite (HA) and bioactive glass 45S5 (BG45S5). After 2, 8, and 12 weeks, the animals were euthanized and the bone pieces were subjected to histological and histomorphometric analyses. Data were subjected to the Shapiro-Wilk normality test (p=0.05), and when normal, we performed the Student's t-test, and when non-normal, we performed the Mann-Whitney test. The results of the physicochemical tests showed success in the production of the new biomaterial. In the in vitro tests, it was observed that the BG45S5 group did not present cytotoxicity and showed promise with a statistically significant difference compared to the commercial hydroxyapatite group (p=0.0263). In the TP, ALP and mineralization nodule tests, the groups showed no statistical difference between them (p<0.05). However, the BG45S5 group showed promise compared to the other groups. In the histological analysis, both groups showed new bone formation in the defects after 2, 8, and 12 weeks. In the histomorphometric analysis, it was observed that the BG45S5 and HA groups presented a larger area of new bone formation at 12 weeks. There was a statistically significant difference between the groups at 2 weeks, with greater new formation for the BG45S5 group. Despite the promising results of the BG45S5 group, there was no statistically significant difference between the groups (p<0.05) at 8 and 12 weeks. In summary, the results evidenced the successful production of the synthetic biomaterial and the potential of the BG45S5 bioglass as a promising material for treating critical bone defect.(AU)

Comparative study of physical-chemical properties of bioactive glass ionomer cement

Abstract This study analyzed the physical-chemical properties of bioactive ionomer materials. Cention N bioactive materials were evaluated chemically activated (CN) and light-cured (CN-LC), Equia Forte Fill (EQUI); conventional resin composite Filtek Z350 XT (Z350); resin glass ionomer cement Riva light Cure (RIVA) and flowable resin composite Filtek Bulk Fill Flow (BULK-F) were evaluated. Sixty specimens (n=10) were prepared for sorption (SR), solubility (SL), flexural strength (FS), shrinkage stress (SS), conversion degree (CD), microhardness (MI), and surface roughness (SR) tests. Non-cured and light-cured materials were assessed on FTIR. 30 human molar teeth were used in the bond strength test (BS). Data were subjected to ANOVA and post-hoc Tukey's test (5% of significance). EQUI showed more sorption in SR and no statistical difference from RIVA and CN-LC. CN group showed more solubility and EQUI presented less (p<0.05). BULK-F showed higher FS (MPa), without differences from CN and Z350, whereas EQUI presented the lowest FS not differing from RIVA. BULK-F and CN-LC showed more shrinkage stress differing from EQUI. CN-LC and CN showed higher CD differing from the other which showed no differences (p>0.05) between them. EQUI showed the highest hardness (p<0.05) in MI. There were no differences (p>0.05) in SR (µm). Z350 and BULK-F presented higher BS, whereas CN-LC showed the lowest, although not differing from EQUI and RIVA. Equia Forte's solubility and microhardness make it a good alternative as a restorative material. Cention N degree of conversion and flexural strength making it an esthetic option to amalgam.

Resumo Este estudo analisou as propriedades físico-químicas dos materiais de ionômero bioativo. Os materiais bioativos Cention N quimicamente ativados (CN) e fotopolimerizados (CN-LC), Equia Forte Fill (EQUI); resina composta convencional Filtek Z350 XT (Z350); resina de ionômero de vidro Riva light Cure (RIVA) e resina composta fluida Filtek Bulk Fill Flow (BULK-F) foram avaliados. Sessenta espécimes (n=10) foram preparados para testes de sorção (SR), solubilidade (SL), resistência à flexão (FS), tensão de contração (SS), grau de conversão (CD), microdureza (MI) e rugosidade da superfície (SR). Os materiais não curados e curados com luz foram avaliados por FTIR. 30 dentes molares humanos foram usados no teste de resistência de união (BS). Os dados foram submetidos a ANOVA e teste de post-hoc Tukey (5% de significância). O EQUI apresentou maior sorção no SR e não mostrou diferença estatística em relação aos grupos RIVA e CN-LC. O grupo CN apresentou maior solubilidade e o EQUI apresentou menor (p<0,05). O BULK-F apresentou maior FS (MPa), sem diferir do CN e do Z350, enquanto o EQUI apresentou o menor FS, não diferindo do RIVA. O BULK-F e o CN-LC apresentaram maior estresse de contração, diferindo do EQUI. O CN-LC e o CN apresentaram maior CD (%), diferindo dos demais, que não apresentaram diferenças (p>0,05) entre si. A EQUI apresentou a maior dureza (p<0,05) no MI. Não houve diferenças (p>0,05) na SR (µm). Z350 and BULK-F apresentaram BS, enquanto a CN-LC apresentou a menor, embora não diferindo da EQUI e da RIVA. A solubilidade e a microdureza do Equia Forte o tornam uma boa alternativa como material restaurador. O grau de conversão e a resistência à flexão do Cention N o tornam uma opção estética ao amálgama.

Activation of M1 muscarinic acetylcholine receptors by proline-rich oligopeptide 7a (

Background: The bioactive peptides derived from snake venoms of the Viperidae family species have been promising as therapeutic candidates for neuroprotection due to their ability to prevent neuronal cell loss, injury, and death. Therefore, this study aimed to evaluate the cytoprotective effects of a synthetic proline-rich oligopeptide 7a (PRO-7a; <EDGPIPP) from Bothrops jararaca snake, on oxidative stress-induced toxicity in neuronal PC12 cells and astrocyte-like C6 cells. Methods: Both cells were pre-treated for four hours with different concentrations of PRO-7a, submitted to H2O2-induced damage for 20 h, and then the oxidative stress markers were analyzed. Also, two independent neuroprotective mechanisms were investigated: a) L-arginine metabolite generation via argininosuccinate synthetase (AsS) activity regulation to produce agmatine or polyamines with neuroprotective properties; b) M1 mAChR receptor subtype activation pathway to reduce oxidative stress and neuron injury. Results: PRO-7a was not cytoprotective in C6 cells, but potentiated the H2O2-induced damage to cell integrity at a concentration lower than 0.38 μM. However, PRO-7a at 1.56 µM, on the other hand, modified H2O2-induced toxicity in PC12 cells by restoring cell integrity, mitochondrial metabolism, ROS generation, and arginase indirect activity. The α-Methyl-DL-aspartic acid (MDLA) and L-NΩ-Nitroarginine methyl ester (L-Name), specific inhibitors of AsS and nitric oxide synthase (NOS), which catalyzes the synthesis of polyamines and NO from L-arginine, did not suppress PRO-7a-mediated cytoprotection against oxidative stress. It suggested that its mechanism is independent of the production of L-arginine metabolites with neuroprotective properties by increased AsS activity. On the other hand, the neuroprotective effect of PRO-7a was blocked in the presence of dicyclomine hydrochloride (DCH), an M1 mAChR antagonist. Conclusions: For the first time, this work provides evidence that PRO-7a-induced neuroprotection seems to be mediated through M1 mAChR activation in PC12 cells, which reduces oxidative stress independently of AsS activity and L-arginine bioavailability.(AU)

In vitro characterization of a novel resin-based restorative material containing alkaline fillers

Abstract Objective: In this study, a comparative evaluation of the physicochemical properties of Cention N and other direct restorative materials was performed. Three restorative materials—a resin-modified glass ionomer (Fuji II LC), an alkasite-based resinous material (Cention N), and a resin composite (Tetric N Ceram)—were characterized in terms of degree of conversion, Knoop hardness number (KHN) ratio, flexural strength, elastic modulus, water sorption, water solubility, microshear bond strength to dentin, immediate microleakage, and radiopacity. Methodology: The microshear bond strength to dentin and microleakage of Cention N were evaluated with and without the application of an adhesive system (Tetric N Bond Universal). A one-way ANOVA test was used to analyze the data in terms of degree of conversion, KHN ratio, water sorption, water solubility, microshear bond strength to dentin, and radiopacity. A two-way ANOVA test (carried out considering the material type and ethanol aging as factors) was used to analyze the data in terms of flexural strength and elastic modulus. The Kruskal-Wallis test was used to statistically analyze the data on microleakage. A significance level of α=0.05 was used for all tests. Results: Fuji II LC was found to have the highest degree of conversion, water sorption, and microleakage, as well as the lowest flexural strength. Cention N had the highest solubility; when used with an adhesive system, it achieved bond strength and microleakage similar to those of the Tetric N Ceram composite. Tetric N Ceram had the highest degree of conversion, KHN ratio, and radiopacity. Conclusion: The properties of Cention N validate its efficacy as an alternative direct restorative material when used in conjunction with an adhesive system.

Phytochemical Characterization and Systemic Exposure of Bioactive Metabolites of the Aqueous Extracts of Ficus thonningii Blume (Moraceae) on Albino Wistar Rats

Ficus thonningii (Blume) is considered as a herbal plant with well documented biological activity in the management of several diseases in the tropics. However, there is a gap of information on its safety and proof of efficacy in evidence-based medicine. The objective of this study was to characterize the bioactive metabolites of the hydro-ethanolic extract of the stem bark of Ficus. thonningii and in vivo evaluation of the systemic exposure of the bioactive metabolite. Phytochemical screening was done using standard extraction techniques, and test according to methods adopted from Sofowora and collaborators. Quantitative analysis was done using spectrophotometer of plant extract with different reference standards. Analysis of the animals' plasma following administration of the extract was used to investigate systemic exposure to confirmed the presence of absence of metabolites in systemic circulation. This work shows that F. thonningii (Blume) stem bark hydro-ethanolic extract contains polyphenols, saponins, alkaloids, flavonoids, catechic tannins, gallic tannins, coumarins, quinones, phlobatannins. This study shows that the hydro-ethanolic extract of F. thonningii contains total phenolic content of 192,27 ± 3,40 mgEQ/MS g gallic acid and total flavonoid content of 103,59 ± 15,72 mgEQ/MS quercetin. This study shows that the secondary metabolites in the hydro-ethanolic extract of the stem bark of F. thonningii (Blume) were not detected in plasma and not bioavailable.

Biomechanical and chemical behavior of various bioactive materials in class II restorations / Desempeño biomecánico y químico de diferentes materiales bioactivos en restauraciones clase II

The aim of this in vitro study was to evaluate the biomechanical and chemical behavior of various bioactive materials in class II MOD restorations. Forty- eight standardized class II MOD cavities were prepared in sound extracted human molar teeth. The specimens were divided into four groups according to the restorative material: Group 1 (Filtek™ Z350 XT), Group 2 (Biodentine™ as a liner, and then restored with Filtek™ Z350 XT), Group 3 (Cention N™), and Group 4 (Activa™ Bioactive-Restorative). The samples were tested for fracture resistance by subjecting them to a compressive load in a Universal testing Machine. The failure modes of each specimen were evaluated. The alkalinizing potential and calcium ion release of the materials were measured. SEM-EDAX analyses were also performed for all materials. Data were analyzed using ANOVA and post hoc Tukey test (p<0.05). Group 1 showed the higher fracture resistance (p<0.05). Group 3 had greater fracture resistance values but no statistical difference from Group 4. Biodentine™ showed greater biomineralization potential. Class II MOD restorations of Group 1 displayed the higher fracture resistance; however, it was highly associated with catastrophic failure. Conversely, Biodentine™ presented a more significant bioactivity potential, and its use, as in Group 2, promoted the most favorable failure mode.

El objetivo de este estudio, in vitro, fue evaluar el desempeño biomecánico y químico de varios materiales bioactivos en restauraciones clase II MOD. Se prepararon cuarenta y ocho cavidades clase II MOD estandarizadas en dientes molares humanos extraídos. Las muestras se dividieron en cuatro grupos según el material de restauración: Grupo 1 (Filtek™ Z350 XT), Grupo 2 (Biodentine™ como base y luego restaurado con Filtek™ Z350 XT), Grupo 3 (Cention N™) y Grupo 4 (Activa™ Bioactivo-Reparador). La prueba de resistencia a la fractura fue realizada en una máquina de ensayo universal Instron. Se evaluaron los modos de falla de cada espécimen. Se midió el pH y la liberación de iones de calcio de los materiales. Se realizaron análisis SEM-EDAX. Los datos se analizaron mediante ANOVA y la prueba post hoc de Tukey (p<0,05). El grupo 1 mostró la mayor resistencia a la fractura (p<0,05). El Grupo 3 tuvo mayores valores de resistencia a la fractura que el Grupo 4, pero sin diferencia estadística. Biodentine™ mostró un mayor potencial de biomineralización. Las restauraciones Clase II MOD del Grupo 1 mostraron la mayor resistencia a la fractura; sin embargo, estuvo altamente asociado con fallas irreparables. Por el contrario, Biodentine™ presentó un potencial de bioactividad más significativo y su uso, como en el Grupo 2, promovió el modo de falla más favorable.

Compuestos bioactivos de canela y su efecto en la disminución del síndrome metabólico: revisión sistemática / Bioactive compounds of cinnamon and their effect on decreasing metabolic syndrome: systematic review

Introducción. El síndrome metabólico (SM) aumenta el ingreso hospitalario y el riesgo de desarrollar COVID-19, los fármacos utilizados para su tratamiento ocasionan efectos secundarios por lo que se ha optado por la búsqueda de alternativas terapéuticas a base de compuestos bioactivos contenidos en plantas medicinales. La canela se utiliza como agente terapéutico debido a sus propiedades comprobadas con diversos mecanismos de acción reportados en el tratamiento de varias patologías. Objetivo. Documentar los estudios in vitro, in vivo, estudios clínicos y los mecanismos de acción reportados del efecto de la administración de extractos y polvo de canela en las comorbilidades relacionadas con el SM. Materiales y métodos. Revisión sistemàtica de artículos en bases de datos electrónicas, incluyendo estudios de canela en polvo, extractos acuosos, de acetato de etilo y metanol de la corteza de canela, período de 5 años, excluyendo todo artículo relacionado a su efecto antimicrobiano, antifúngico y aceite de canela. Resultados. Las evidencias de los principales compuestos bioactivos contenidos en la canela validan su potencial en el tratamiento de enfermedades relacionadas al SM, con limitados estudios que indagan en los mecanismos de acción correspondientes a sus actividades biológicas. Conclusiones. Las evidencias de las investigaciones validan su potencial en el tratamiento de estas patologías, debido a sus principales compuestos bioactivos: cinamaldehído, transcinamaldehído, ácido cinámico, eugenol y, antioxidantes del tipo proantocianidinas A y flavonoides, los cuales participan en diversos mecanismos de acción que activan e inhiben enzimas, con efecto hipoglucemiante (quinasa y fosfatasa), antiobesogénico (UPC1), antiinflamatorio (NOS y COX), hipolipemiante (HMG-CoA) y antihipertensivo (ECA)(AU)

Introduction. Metabolic syndrome (MS) increases hospital admission and the risk of developing COVID-19. Due to the side effects caused by the drugs used for its treatment, the search for therapeutic alternatives based on bioactive compounds contained in medicinal plants has been chosen. Cinnamon is used as a therapeutic agent due to its proven properties with various mechanisms of action reported in the treatment of various pathologies. Objective. To document the in vitro and in vivo studies, clinical studies and the mechanisms of action reported on the effect of the administration of cinnamon extracts and powder on comorbidities related to MS. Materials and methods. Systematic review of articles in electronic databases, including studies of cinnamon powder, aqueous extracts, ethyl acetate and methanol from cinnamon bark, over a period of 5 years, excluding all those articles related to its antimicrobial, antifungal and antimicrobial effect. cinnamon oil. Results. The evidence of the main bioactive compounds contained in cinnamon validates its potential in the treatment of diseases related to MS, with limited studies that investigate the mechanisms of action corresponding to its biological activities. Conclusions. Research evidence validates its potential in the treatment of these pathologies, due to its main bioactive compounds: cinnamaldehyde, transcinnamaldehyde, cinnamic acid, eugenol, and antioxidants of the proanthocyanidin A type and flavonoids, which participate in various mechanisms of action that activate and they inhibit enzymes, with hypoglycemic (kinase and phosphatase), antiobesogenic (UPC1), anti-inflammatory (NOS and COX), lipid-lowering (HMG-CoA) and antihypertensive (ACE) effects(AU)

The effect of Phytosphingosine and bioactive glass-ceramics in preventing dental enamel erosion

Abstract This study evaluated the effect of phytosphingosine (PHS) and bioactive glass-ceramic (Biosilicate) on dental enamel in terms of color alteration (ΔE), microhardness, and surface roughness when submitted to erosive challenge (EC). Sixty specimens of bovine teeth (6×6×2mm) were obtained. Initial color (Easyshade, VITA), KHN (HMV-2, Shimadzu), and Ra (SJ-201P, Mitutoyo) measurements were performed. Specimens were separated into groups according to treatments: PHS, 10% Biosilicate, PHS+10% Biosilicate, and artificial saliva (control) and submitted to EC with Coca-Cola for 2 min. This cycle was repeated 4 times daily/15 days. Between cycles, specimens remained in artificial saliva (2 h/37°C). After daily cycles, they were also stored in artificial saliva at 37ºC. Final color, microhardness, and surface roughness measurements were done. Color and KHN data were analyzed by one-way ANOVA, Tukey's test; and Ra, by 2-way ANOVA, repeated measures, and Tukey's test (p<.05). The highest ΔE occurred in Saliva+EC (p<.05). Groups treated with PHS presented lower color change than Saliva+EC (p<.05). All the groups presented mean values above the 50:50% perceptibility (50:50%PT) and acceptability (50:50%AT) thresholds, except for control that showed mean value above 50:50%PT but below 50:50%AT. Biosilicate+EC showed higher relative microhardness than Saliva+EC (p<.05), but was similar to PHS+EC and PHS+Biosilicate+EC. Final enamel surface roughness increased for all the groups (p<.05), except for the control. The Biosilicate may prevent enamel mineral loss induced by erosion better than saliva. The PHS associated or not to Biosilicate demonstrated better color stability than saliva.

Resumo Este estudo avaliou o efeito da Fitoesfingosina (PHS) e da vitrocerâmica bioativa (Biosilicato) sobre o esmalte dental em termos de alteração de cor (ΔE), microdureza (KHN) e rugosidade superficial, quando submetido a desafio erosivo (DE). Sessenta espécimes de dentes bovinos (6×6×2mm) foram obtidos. Foram realizadas leituras de cor inicial (Easyshade, VITA), microdureza (HMV-2, Shimadzu) e rugosidade superfícial (SJ-201P, Mitutoyo). Os espécimes foram separados em grupos de acordo com os tratamentos: PHS, Biosilicato a 10%, PHS+Biosilicato a 10%, e saliva artificial (controle). Em seguida, foram submetidos a DE com Coca-Cola por 2 min. Esse ciclo foi repetido 4 vezes/dia por 15 dias. Entre os ciclos, as amostras foram mantidas em saliva artificial (2 h/37°C). Após os ciclos diários, os espécimes também foram armazenados em saliva artificial a 37ºC. Foram realizadas leituras finais de cor, microdureza e rugosidade superficial. Os dados de cor e microdureza foram analisados ​​por ANOVA de uma via, teste de Tukey; e dados de rugosidade superficial, por ANOVA de duas vias, teste de Tukey (p<.05). A maior ΔE ocorreu em Saliva+DE (p<.05). Grupos tratados com PHS apresentaram menor alteração de cor do que Saliva+DE (p<.05). Biosilicate+DE demonstrou valores intermediários, similar (p>.05) aos outros grupos, exceto Saliva+DE. Todos os grupos presentaram média acima dos limites 50:50% de perceptibilidade (50:50%LP) e aceitabilidade (50:50%LA) exceto o controle que demonstrou média acima do 50:50%LA mas abaixo do 50:50%LP. Biosilicate+DE mostrou maior microdureza realativa do que Saliva+DE (p<.05), mas similar a PHS+DE e PHS+Biosilicato+DE. A rugosidade de superfície do esmalte aumentou para todos os grupos, exceto para o controle que presentou a menor alteração (p<.05). O Biosilicato apode prevenir perda mineral do esmalte indizido pela erosão melhor que a saliva. O PHS associado ou não ao Biosilicato demonstrou melhor estabilidade de cor que a saliva.

Comparison of Fracture Resistance of Simulated Immature Teeth Using Four Different Commercially Available Apexification Materials ? An invitro Study

Introduction: The aim of this study was to compare the fracture resistance of simulated immature teeth using four different apical plug materials, i.e. Pro? Root MTA, Neo? MTA Plus, Biodentine, and Bioactive Glass. Materials and Methods: 80 extracted human maxillary anterior teeth were divided into 4 groups for this study. They were prepared using Peeso reamers to simulate immature teeth and to mimic Cvek’s stage 3 of root development. A 5 mm apical barrier was placed using different materials. The remaining canal was obturated using gutta?percha and AH plus sealer. The final samples were stored at 37°C and 100% humidity for 4 weeks. Fracture resistance of the teeth was measured in Newtons using a universal testing machine. The comparison of fracture resistance between the four groups was done using Kruskal Walis ANOVA followed by post hoc Mann Whitney U test for pairwise comparison. Results: Biodentine group showed the highest fracture resistance as compared to the other three groups and the difference was highly significant (P < 0.001). Conclusions: Biodentine can be advocated over MTA as an effective material for the management of teeth with wide open apex. Bioactive glass also has shown promising results in increasing the fracture resistance of simulated immature teeth.

Mechanism of action of Bioactive Endodontic Materials

Abstract A continuous search for bioactive materials capable of supporting the replacement of damaged pulp tissue, with effective sealing potential and biocompatibility, has represented the attention of studies over the last decades. This study involves a narrative review of the literature developed by searching representative research in PUBMED/MEDLINE and searches in textbooks associated with the mechanism of action of bioactive materials (calcium hydroxide, mineral trioxide aggregate (MTA), and calcium silicate cements). The reflective analysis of the particularities of the chemical elements of these materials, considering the tissue and antibacterial mechanism of action, allows a better understanding of the characteristics and similarities in their tissue responses. Calcium hydroxide paste remains the antibacterial substance of choice as intracanal dressing for the treatment of root canal system infections. Calcium silicate cements, including MTA, show a favorable biological response with the stimulation of mineralized tissue deposition in sealed areas when in contact with connective tissue. This is due to the similarity between the chemical elements, especially ionic dissociation, the potential stimulation of enzymes in tissues, and the contribution towards an alkaline environment due to the pH of these materials. The behavior of bioactive materials, especially MTA and the new calcium silicate cements in the biological sealing activity, has been shown to be effective. Contemporary endodontics has access to bioactive materials with similar properties, which can stimulate a biological seal in lateral and furcation root perforations, root-end fillings and root fillings, pulp capping, pulpotomy, apexification, and regenerative endodontic procedures, in addition to other clinical conditions.

Resumo Uma busca contínua de materiais bioativos com capacidade de substituir o tecido pulpar danificado, com efetiva capacidade de selamento e biocompatibilidade, tem representado a atenção e foco de muitos estudos ao longo das últimas décadas. Este estudo envolve uma revisão narrativa da literatura desenvolvida por meio de pesquisas representativas encontradas no PUBMED/MEDLINE e pesquisas em livros didáticos associadas ao mecanismo de ação de materiais bioativos (hidróxido de cálcio, agregado de trióxido mineral (MTA) e cimentos de silicato de cálcio). A presente análise reflexiva das particularidades dos elementos químicos destes materiais bioativos, considerando o mecanismo de ação tecidual e antibacteriano, possibilita um melhor entendimento das características e similaridades no comportamento tecidual. A pasta de hidróxido de cálcio continua sendo a substância antibacteriana de escolha como medicação intracanal para o tratamento das infecções do sistema de canais radiculares. Este fato se deve a disponibilidade química de íons cálcio e hidroxila do hidróxido de cálcio aos tecidos, e a inibição enzimática bacteriana. Os cimentos de silicato de cálcio, dentre os quais inclui o MTA, apresentam uma resposta biológica favorável ao estímulo à deposição de tecido mineralizado nas áreas seladas e em contato com tecido conjuntivo. Este fato é decorrente da similaridade entre os elementos químicos, em especial devido a dissociação iônica, ao potencial estímulo de enzimas teciduais, e a contribuição com um meio alcalino decorrente do pH destes materiais. O comportamento dos materiais bioativos, em especial o MTA e os novos cimentos de silicato de cálcio na atividade de selamento biológico mostraram efetivos. A endodontia contemporânea atualmente conta com o potencial de materiais bioativos com propriedades análogas capaz de estimular o selamento biológico em perfurações radiculares laterais e de furca, em obturações radiculares, capeamento pulpar, pulpotomia, apicificação e procedimentos endodônticos regenerativos, além de outras condições clínicas.

Fast Skeletal Muscle Troponin and Tropomyosin as a Dietary Source of Antidiabetic and Antihypertensive Bioactive Peptides: An In Silico Study / Troponina y Tropomiosina de Músculo Esquelético como Fuente Alimentaria de Péptidos Bioactivos Antidiabéticos y Antihipertensivos: Estudio In Silico

Background: The nutraceutical properties of food hydrolysates rely on multiple biochemical interactions involving the modulation of enzymes and cellular receptors. Numerous bioactive peptides released from troponin and tropomyosin digestion have been identified. Their characterization has mostly been performed by hydrolysis catalyzed by proteases unrelated to the human digestive system. Objective: This study aimed to determine the bioactive profile of beef, pork, and chicken meat by analyzing the frequency and pharmacokinetics of biopeptides released from troponin and tropomyosin. Methods:In silico digestion and biopeptide release frequency were studied by three parameters; bioactive fragments release frequency (AE), frequency percentage (W), and mean occurrence (AS), all stated on the BIOPEP-UWM platform. Further on, hydrolysis end-products were screened based on gastrointestinal-absorption probability and pharmacokinetic profiling performed on SwissADME, SwissTargetPrediction, and ADME/Tlab bioinformatics web tools. Statistical analyses were performed using a one-way ANOVA test. Results: Dipeptidyl peptidase-IV (DPP-IV) and angiotensin-converting enzyme (ACE) inhibiting biopeptides exhibited the highest release frequency. Moreover, W and ASparameters showed no significant difference (p>0.05) between the myofibrillar isoforms assessed. Seven biopeptides were classified as highly absorbable and reported optimal drug-likeness compliance. Although biopeptides hold good pharmacokinetic properties, the therapeutic potency of biopeptides showed to be lower than those of DPP-IV and ACE-inhibiting drugs. Conclusions: Troponin and tropomyosin are rich dietary sources of bioactive peptides, mainly DPP-IV and ACE inhibitors. Digestion end-products are mainly dipeptides with optimal pharmacokinetic and drug-like properties, suggesting a potential therapeutic application in hypertensive and hyperglycemic disorders

Antecedentes: Las propiedades nutracéuticas de los hidrolizados de alimentos dependen de múltiples interacciones bioquímicos que involucran la modulación de enzimas y receptores celulares. Se han identificado numerosos péptidos bioactivos liberados de la digestión de troponina y tropomiosina, pero su caracterización se ha llevado a cabo principalmente por hidrólisis catalizada por proteasas ajenas al sistema digestivo humano. Objetivo: Este estudio tuvo como objetivo determinar el perfil bioactivo de la carne de res, cerdo y pollo mediante el análisis de la frecuencia y farmacocinética de los biopéptidos liberados de la troponina y la tropomiosina. Métodos: Se estudió la digestión in silico y la frecuencia de liberación de biopéptidos mediante dos parámetros; frecuencia de liberación de fragmentos bioactivos (AE), frecuencia porcentual (W) y ocurrencia media (AS), ambos indicados en la plataforma BIOPEP-UWM. Más adelante, los productos finales de la hidrólisis se examinaron en función de la probabilidad de absorción gastrointestinal y el perfil farmacocinético realizado en las herramientas bioinformáticas SwissADME, SwissTargetPrediction y ADME/Tlab. El análisis estadístico se llevó a cabo mediante una prueba ANOVA de una vía. Resultados: Los biopéptidos inhibidores de la dipeptidil peptidasa IV (DPP-IV) y la enzima convertidora de angiotensina (ECA) exhibieron la mayor frecuencia de liberación. Además, los parámetros W y ASno mostraron diferencias significativas (p> 0.05) entre las isoformas miofibrilares evaluadas. Siete biopéptidos se clasificaron como altamente absorbibles e informaron un cumplimiento óptimo de similitud con el fármaco. Aunque los biopéptidos tienen propiedades farmacocinéticas adecuadas, su potencia terapéutica demostró ser menor que la de los fármacos inhibidores de la DPP-IV y la ACE. Conclusiones: La troponina y la tropomiosina son una fuente dietética rica en péptidos bioactivos, principalmente DPP-IV e inhibidores de la ACE. Los productos finales de la digestión son principalmente dipéptidos con propiedades farmacocinéticas óptimas y similares a la de los fármacos, lo que sugiere una aplicación terapéutica factible en trastornos hipertensivos e hiperglicémicos

Chemical characterization, cytotoxicity, antimicrobial and antioxidant potential of Justicia pectoralis Jacq and Croton jacobinensis Baill extracts

Abstract In this research, aqueous and ethanolic extracts from Justicia pectoralis Jacq and Croton Jacobinensis Baill were characterized. The UPLC-QTOF-MSE analysis was performed on the extracts identified, predominantly, flavonoids, tannins and acids. The extracts did not indicate toxicity in human epithelial cells. C. jacobinensis presented a concentration of phenolics 60.5% higher than J. pectoralis in all scenarios evaluated and, for both samples, the hydroalcoholic extract at 70% exhibited the best efficiency in the extraction (14501.3 and 32521.5 mg GAE 100 g-1 for J. pectoralis and C. jacobinensis, respectively). The antioxidant activity presented a positive correlation with the concentration of phenolics, being 1.186,1 and 1.507,9 µM of Trolox for J. pectoralis and C. jacobinensis at 70% of ethanol; however, it was not verified statistical difference between the ethanolic solutions (p < 0.05). The antimicrobial activity of J. pectoralis extracts was highlighted once was the most effective against gram-positive bacteria. The results suggest that both J. pectoralis and C. jacobinensis extracts present the potential to be applied as natural additives due to their antioxidant and antimicrobial activity and safety. Thus, it is suggesting the development of studies that could investigate the interaction of these plant extracts with food matrices is required

Influência da adição de partículas de vidro bioativas em adesivos resinosos, na cimentação de bráquetes ortodônticos / Influence of the addition of bioactive glass particles in resin adhesives in the cementation of orthodontic brackets

O objetivo deste estudo foi desenvolver e avaliar um adesivo resinoso modificado com a incorporação de partículas de vidro bioativas (SCHOTT Bioactive Glass) em diferentes concentrações. Foram avaliados a resistência ao cisalhamento (RU), o índice de remanescente dentário (IRA), o grau de conversão (GC) e a liberação de cálcio. Foram utilizados 50 incisivos bovinos que foram fixados, através de suas raízes, em um molde de PVC, com resina acrílica autopolimerizável. As amostras foram alocadas em 5 grupos (n=10): TXT - Adesivo Transbond XT (3M Unitek, Monrovia, CA, EUA) sem adição de partículas de vidro bioativas, TXT20, TXT30, TXT50 ­ Adesivo Transbond XT acrescido respectivamente de 20%, 30% e 50% de partículas de vidro bioativas e SH - Adesivo resinoso FL BOND ll (SHOFU Inc.) com biomaterial SPRG. As amostras receberam uma profilaxia com pedra pomes e condicionamento com ácido fosfórico à 37%. Em seguida foi aplicada uma fina camada do sistema adesivo indicado na face vestibular dos incisivos bovinos, em todos os grupos e fotopolimerizado por 20 segundos, utilizando-se um fotopolimerizador RADII-Cal (SDI, Victoria, Austrália). Depois foi aplicada uma pequena quantidade de pasta resinosa fotopolimerizável Transbond XT (3M Unitek, Monrovia, CA, EUA) sobre a superfície dos bráquetes autoligados (MORELLI, Sorocaba, São Paulo, Brasil) e estes foram devidamente colados na face vestibular, no centro da coroa clínica do incisivo bovino e fotopolimerizado por 20 segundos, em cada face. Posteriormente as amostras foram submetidas ao teste de resistência ao cisalhamento. O índice de remanescente adesivo foi avaliado em estereomicroscópio DISCOVERY V20 (ZEISS). Os adesivos resinosos foram submetidos ao teste de grau de conversão e liberação de cálcio. Os dados foram inicialmente submetidos ao teste de normalidade e depois submetidos ao teste de ANOVA um fator, seguido do teste de Tukey para análise de comparações múltiplas, com nível de significância de 0,05. De acordo com os resultados obtidos na resistência de união ao cisalhamento (MPa±Dp) a maior média foi observada no grupo TXT 19,50±1,40A, seguida do grupo TXT20 18,22±1,04AB, seguida do grupo SH 17,62±1,45B, seguida do grupo TXT30 14,48±1,46C e a menor média TXT50 14,13±1,02C. No grau de conversão a maior média foi observada no grupo TXT20 73,02±3,33A que foi estatisticamente semelhante ao grupo SH 68,50±1,09A, seguida do grupo TXT 60,28±1,06B e TXT30 58,84±4,06B e a menor média foi do grupo TXT50 40,67±1,21C.Para a liberação de cálcio a maior média foi TXT50 2,23±0,11D, seguida por TXT30 0,74±0,00C, TXT20 0,55±0,00B, SH 0,47±0,04B e TXT 0,14±0,00A. Concluiu-se que a incorporação de partículas de vidro bioativas influenciou na resistência de união ao cisalhamento, no grau de conversão e na liberação de cálcio (AU).

The objective of this study was to develop and evaluate a resin adhesive modified with the incorporation of bioactive glass particles (SCHOTT Bioactive Glass) in different concentrations. Shear bond strength (SBS), adhesive remnant index (ARI), degree of conversion (DC) and calcium release were evaluated. Fifty bovine incisors were used, which were fixed through their roots in a PVC mold with self-curing acrylic resin. The samples were allocated into 5 groups (n=10): TXT ­ Transbond XT Adhesive (3M Unitek, Monrovia, CA, USA) without addition of bioactive glass particles, TXT20, TXT30, TXT50 ­ Transbond XT Adhesive rescpectively increased by 20%, 30% and 50% bioactive glass particles and SH ­ FL BOND ll resin adhesive (SHOFU Inc.) with SPRG biomaterial. The samples received prophylaxis with pumice stoe and conditioning with 37% phosphoric acid. Then, a thin layer of the indicated adhesive system was applied to the buccal surface of the bovine incisors, in all groups, and light cured for 20 seconds, using a RADII-Call curing light (SDI, Victoria, Australia). Then, a small amount of Transbond XT light-curing resinous paste (3M Unitek, Monrovia, CA, USA) was applied on the surface of the self-ligating brackets (MORELLI, Sorocaba, São Paulo, Brazil) and these were duly bonded on the buccal surface, in the center of the clinical crown of the bovine incisor and light cured for 20 seconds, on each side. Subsequently, the samples were submitted to the shear bond test. The adhesive remnant index was evaluated using a DISCOVERY V20 stereomicroscope (ZEISS). The resin adhesives were submitted to the degree of conversion and calcium release test. The data were initially submitted to the normality test and then submitted to the one-way ANOVA test, followed by the Tukey test for analysis of multiple comparisons, with a significance level of 0.05. According to the results obtained in the shear bond strength (MPa±Dp), the highest average was observed in the TXT group 19.50±1.40A, followed by the TXT20 group 18.22±1.04AB, followed by the SH group 17.62±1.45B, followed by the TXT30 group 14.48±1.46C and the lowest mean TXT5014.13±1.02C. In the degree of conversion, the highest average was observed in the TXT20 73.02±3.33A group, wich was statiscally like the SH group 68.50±1.09A, followed by the TXT 60.28±1.06B and TXT30 group 58.84±4.06B and the lowest mean was for the TXT50 group 40.67±1.21C. For calcium release, the highest mean was TXT50 2.23±0.11D, followed by TXT30 0.74±0.00C, TXT20 0.55±0.00B, SH 0.47±0.04B and TXT 0.14±0.00A. It was concluded that the incorporation of bioactive glass particles influenced in the shear bond strength, in the degree of conversion and in the release of calcium (AU).

S53p4 bioactive glass putty in the local treatment of cavitary chronic osteomyelitis / Biovidro ativo s53p4 em pasta no tratamento local da osteomielite crônica cavitária

ABSTRACT Objective: Evaluating the clinical results of bioactive glass S53P4 putty for the treatment of cavitary chronic osteomyelitis. Methods: Retrospective observational study, including patients of any age with clinical and radiological diagnosis of chronic osteomyelitis, who underwent surgical debridement and implantation of bioactive glass S53P4 putty (BonAlive® Putty, Turku, Finland). Patients who underwent any plastic surgery on the soft tissues of the affected site or had segmental bone lesions or septic arthritis were excluded. Statistical analysis was performed using Excel®. Demographic data, as well as data on the lesion, treatment, and follow-up, were collected. Outcomes were classified as "disease-free survival," "failure," or "indefinite." Results: This study included 31 patients, of which 71% were men and had with a mean age of 53.6 years (SD ± 24.2). In total, 84% were followed-up for at least 12 months and 67.7% had comorbidities. We prescribed combination antibiotic therapy for 64.5% of patients. In 47.1%, Staphylococcus aureus was isolated. Finally, we classified 90.3% of cases as "disease-free survival" and 9.7% as "indefinite." Conclusion: Bioactive glass S53P4 putty is safe and effective to treat cavitary chronic osteomyelitis, including infections by resistant pathogens, such as methicillin-resistant S. aureus. Level of Evidence IV, Case Series.

RESUMO Objetivo: Avaliar a atividade do vidro bioativo S53P4 em pasta no tratamento de osteomielite crônica. Métodos: Estudo observacional retrospectivo, com inclusão de indivíduos de qualquer idade com diagnóstico clínico e radiológico de osteomielite que realizaram tratamento cirúrgico com limpeza e desbridamento, seguido do preenchimento da cavidade com biovidro S53P4 em pasta (BonAlive ® Putty, Turku, Finland). Foram excluídos pacientes submetidos a procedimentos de cirurgia plástica nos tecidos moles do local afetado, com lesões ósseas segmentares e com presença de artrite séptica. A análise estatística foi realizada em Excel ® . Foram coletados dados demográficos, sobre a lesão, o tratamento e o acompanhamento. O desfecho foi classificado em "sobrevida livre de doença", "falha" ou "indeterminado". Resultados: Dos 31 pacientes analisados, 71% eram homens, com idade média de 53,6 anos (DP ± 24,26). Do total, 84% foram acompanhados por no mínimo 12 meses, e 67,7% apresentaram comorbidades. A terapia antibiótica combinada foi realizada em 64,5% dos pacientes, sendo o patógeno mais frequente o Staphylococcus aureus (47,1%). Ao final, 90,3% dos pacientes obtiveram "sobrevida livre de doenças" e 9,7% foram considerados "indeterminados". Conclusão: O vidro bioativo S53P4 em pasta é seguro e eficaz no tratamento da osteomielite cavitária e de infecções por patógenos resistentes, incluindo o S. aureus multirresistente. Nível de Evidência IV, Série de Casos.

Application of partial least squares algorithm to explore bioactive components of crude and stir-baked hawthorn for invigorating spleen and promoting digestion / 中国中药杂志

This study was aimed at identifying the bioactive components of the crude and stir-baked hawthorn for invigorating spleen and promoting digestion, respectively, to clarify the processing mechanism of hawthorn by applying the partial least squares(PLS) algorithm to build the spectrum-effect relationship model. Firstly, different polar fractions of crude and stir-baked hawthorn aqueous extracts and combinations of different fractions were prepared, respectively. Then, the contents of 24 chemical components were determined by ultra-high performance liquid chromatography-mass spectrometry. The effects of different polar fractions of crude hawthorn and stir-baked hawthorn aqueous extracts and combinations of different fractions were evaluated by measuring the gastric emptying rate and small intestinal propulsion rate. Finally, the PLS algorithm was used to establish the spectrum-effect relationship model. The results showed that there were significant differences in the contents of 24 chemical components for different polar fractions of crude and stir-baked hawthorn aqueous extracts and combinations of different fractions, and the gastric emptying rate and small intestinal propulsion rate of model rats were improved by administration of different polar fractions of crude and stir-baked hawthorn aqueous extracts and combinations of different fractions. The bioactive components of crude hawthorn identified by PLS models were vitexin-4″-O-glucoside, vitexin-2″-O-rhamnoside, neochlorogenic acid, rutin, gallic acid, vanillic acid, citric acid, malic acid, quinic acid and fumaric acid, while neochlorogenic acid, cryptochlorogenic acid, rutin, gallic acid, vanillic acid, citric acid, quinic acid and fumaric acid were the bioactive components of stir-baked hawthorn. This study provided data support and scientific basis for identifying the bioactive components of crude and stir-baked hawthorn, and clarifying the processing mechanism of hawthorn.

Biomanufacturing of bioactive compounds: current situation, challenges, and future perspectives / 生物工程学报

Biomanufacturing uses biological systems, including cells, microorganisms, and enzymes, to produce natural or synthetic molecules with biological activities for use in various industries, such as pharmaceuticals, cosmetics, and agriculture. These bioactive compounds are expected to play important roles in improving the quality of life and prolonging its length. Fortunately, recent advances in synthetic biology and automation technologies have accelerated the development of biomanufacturing, enabling us to create new products and replace conventional methods in a more sustainable manner. As of now, the role of biomanufacturing in the growth and innovation of bioeconomy is steadily increasing, and this techbology becomes a prevalent technology in global markets. To gain a comprehensive understanding of this field, this article presents a retrospective review of Bloomage Biotechnology's Research and Development and briefly reviews the developments of biomanufacturing and offers insights into the futre prospects. In conclusion, biomanufacturing will continue to be an important, environmentally friendly, and sustainable production mode in the ongoing development of bioeconomy.

Effects of novel bioactive glasses on promoting remineralization of artificial dentin caries / 北京大学学报(医学版)

OBJECTIVE@#To investigate the effects of novel bioactive glasses (BG) including PSC with high phosphorus component and FBG with fluorine-doped element on promoting remineralization of artificial dentin caries.@*METHODS@#(1) BGs were used in this study as follows: PSC (10.8%P2O5-54.2%SiO2-35.0%CaO, mol.%) were synthesized using phytic acid as the phosphorus precursor through sol-gel method. FBG (6.1%P2O5-37.0%SiO2-53.9%CaO-3.0%CaF2, mol.%) and 45S5(6.0%P2O5-45.0%SiO2-24.5%CaO-24.5%Na2O, mol.%) were synthesized by traditional melt method. (2) The above BGs were soaked in simulated body fluid (SBF) for 24 hours. Then X-ray diffraction (XRD) was used to analyze the formation of hydroxyapatite (HA) crystals. (3) Prepared 1 mm thick dentin slices were soaked in 17% ethylene diamine tetraacetic acid (EDTA) for 1 week to demineralize the dentin. Then the dentin slices treated by BG were soaked in SBF for 1 week. Field emission scanning electron micro-scopy (FE-SEM) was used to observe the surface morphology of the dentin slices. (4) Four cavities were prepared to 1 mm depth in each 2 mm thick dentin slice, then were treated with lactic acid for 2 weeks to form the artificial dentin caries. Wax, mineral trioxide aggregate (MTA), PSC and FBG were used to fill four cavities as blank control group, MTA group, PSC group and FBG group respectively. Then the spe-cimens were soaked in SBF for 4 weeks. The changes of depth and density of demineralized dentin were analyzed using Micro-CT before filling and after 2 and 4 weeks filling.@*RESULTS@#(1) PSC and FBG promoted mineral formation on the surfaces of the demineralized dentin. And the speed was faster and crystallinity was higher in PSC group than the FBG and 45S5 groups. (2) The increased mineral density of artificial dentin caries in PSC group were (185.98 ± 55.66) mg/cm3 and (213.64 ± 36.01) mg/cm3 2 and 4 weeks after filling respectively, which were significantly higher than the control group [(20.38 ± 7.55) mg/cm3, P=0.006; (36.46 ± 10.79) mg/cm3, P=0.001]. At meanwhile, PSC group was also higher than MTA group [(57.29 ± 10.09) mg/cm3; (111.02 ± 22.06) mg/cm3], and it had statistical difference (P=0.015; P=0.006). The depth of remineralized dentin in PSC group were (40.0 ± 16.9) μm and (54.5 ± 17.8) μm 2 and 4 weeks respectively, which were also statistically different from the control group (P =0.010;P=0.001). There were no statistical differences between the control group and MTA group. The above effects of FBG group were between PSC and MTA.@*CONCLUSION@#PSC has advantages in the speed, quality and depth of mineral deposition in the demineralized layer of artificial dentin caries. It would be expected to be an ideal material to promote the remineralization of dentin caries.

Analysis and evaluation of bioactive constituents from different parts of Epimedium brevicornum / 中国中药杂志

A comprehensive analytical method based on ultra-fast liquid chromatography coupled with triple quadrupole/linear ion trap tandem mass spectrometry(UFLC-QTRAP-MS/MS) was established for simultaneous determination of the content of 45 bioactive constituents including flavonoids, alkaloids, amino acids, phenolic acids, and nucleosides in Epimedium brevicornum. The multiple bioactive constituents in leaves, petioles, stems and rhizomes of E. brevicornum were analyzed. The gradient elution was performed at 30 ℃ in an XBridge~® C_(18) column(4.6 mm×100 mm, 3.5 μm) with 0.4% formic acid aqueous solution-acetonitrile as the mobile phase at a flow rate of 0.8 mL·min~(-1). Single factor experiment and response surface methodology were employed to optimize the extraction conditions. Multivariate statistical analyses including systematic cluster analysis(SCA), principal component analysis(PCA), partial least squares discriminant analysis(PLS-DA), and one-way analysis of variance(One-way ANOVA) were carried out to classify the samples from different parts and identify different constituents. Grey relation analysis(GRA) and entropy weight-TOPSIS analysis were performed to build a multi-index comprehensive evaluation model for different parts of E. brevicornum. The results showed that there was a good relationship between the mass concentrations of 45 constituents and the corresponding peak areas, with the correlation coefficients(r) not less than 0.999 0. The precision, repeatability, and stability of the established method were good for all the target constituents in this study, with the relative standard deviations(RSDs) less than 5.0%(0.62%-4.9%) and the average recovery of 94.51%-105.7%. The above results indicated that the bioactive constituents varied in different parts of E. brevicornum, and the overall quality followed the trend of leaves > petioles > rhizomes > stems. This study verified the rationality of the Chinese Pharmacopoeia(2020 edition) stipulating that the medicinal part of E. brevicornum is the leaf. Moreover, our study indicated that the rhizome had the potential for medicinal development. The established method was accurate and reliable, which can be used to comprehensive evaluate and control the quality of E. brevicornum. This study provides data reference for clarifying the medicinal parts and rationally utilizing the resources of E. brevicornum.