Bolton tooth size analysis in a sample of Sudanese adults / Análise de Bolton do tamanho dentário em uma amostra de adultos sudaneses

Introduction: A correct proportion between the upper and lower teeth is critical to achieving proper occlusal interdigitation, ideal overjet, and good molar intercuspation at the end of orthodontic treatment. Objectives: To determine the anterior and overall Bolton's ratio in the Sudanese population, investigate gender differences in tooth size ratios, and to compare these results with Bolton's original ratio norm. Material and Methods: The sample consisted of dental casts of 104 Sudanese University students with normal occlusion (52 females, 52 males), aged between 16-26 years randomly selected from AL- Neelain University. An electronic digital caliper was used to measure the mesiodistal tooth size of the maxillary and mandibular teeth anterior to the second molars. These measurements were then used to obtain Bolton's ratio. Mean, range, and standard deviation of the anterior and overall ratios were computed for each subject. T-Tests were used to compare gender differences and to investigate differences between the results of this study and Bolton's original ratio. Results: Anterior and overall Bolton ratios for males were 78.43 ± 2.44 and 93.901 ± 9.8 and for females were 78.29 ± 2.6 and 91.67 ± 3.3 percent, respectively. There were no statistically significant differences between males and females for the anterior and overall ratios (P>0.05). The anterior and overall Bolton's ratios among Sudanese University students were 78.37 ± 2.54, and 92.79 ± 7.43 percent, respectively. A statistically significant difference between this study and Bolton's study was found in both anterior and overall ratio (P≤ 0.05). Conclusion: Bolton's mean ratios may not be applicable to the Sudanese population. (AU)

Introdução: Uma proporção correta entre os dentes superiores e inferiores é crítica para alcançar a interdigitação oclusal adequada, overjet ideal e boa intercuspidação molar ao final do tratamento ortodôntico. Objetivos: determinar a proporção anterior e geral de Bolton na população sudanesa, investigar as diferenças de gênero nas proporções de tamanho dos dentes e comparar esses resultados com a norma original de Bolton. Material e Métodos: A amostra foi constituída por modelos de gesso de 104 universitários sudaneses com oclusão normal (52 mulheres, 52 homens), com idades entre 16-26 anos, selecionados aleatoriamente na Universidade AL-Neelain. Um paquímetro digital eletrônico foi usado para medir o tamanho mesiodistal dos dentes superiores e inferiores anteriores aos segundos molares. Essas medidas foram então usadas para obter o índice de Bolton. Média, intervalo e desvio padrão das relações anterior e geral foram calculados para cada amostra. Os testes t foram usados para comparar as diferenças de gênero e para investigar as diferenças entre os resultados deste estudo e a proporção original de Bolton. Resultados: Os índices de Bolton anterior e geral para homens foram 78,43 ± 2,44 e 93,901 ± 9,8 e para mulheres foram 78,29 ± 2,6 e 91,67 ± 3,3 por cento, respectivamente. Não houve diferenças estatisticamente significativas entre homens e mulheres para os índices anterior e geral (P> 0,05). Os índices de Bolton anterior e geral entre os estudantes da Universidade sudanesa foram 78,37 ± 2,54 e 92,79 ± 7,43 por cento, respectivamente. Uma diferença estatisticamente significativa entre este estudo e o estudo de Bolton foi encontrada na proporção anterior e geral (P≤ 0,05). Conclusão: os índices médios de Bolton podem não ser aplicáveis à população sudanesa (AU)

Scleral Dellen after Routine Uneventful Pterygium Surgery.

Occurrence of Scleral Dellen is rare but serious complication with stromalinflammation with tissue loss and scarring. Scleral dellen results from localdehydration & thinning of scleral tissues with exposure of underlying uvea leading toblueish colour. Occular surgical causes of occurrence of scleral dellen are strabismussurgery, pterygium excision (with or without use of adjunctive treatment like betaradiation, conjunctival autograft and Mitomycin C), cataract extraction.1,2 Patientscomplain of foreign body sensation & mild discomfort. Treatment consists ofreduction or elimination of contributing perilimbal elevation, & rapid rehydrationwith artificial tears, eye ointment and patching3. If treated properly dellen usuallyresolves completely without permanent sequelae. We report a case of severe scleraldellen that occurred 14 days after the uneventful surgical excision of primarypterygium without adjuvant therapy. We describe a patient with scleral dellen, whichoccurred after an uneventful pterygium excision without adjunctive therapy.

ViVan Ratio for Maxillomandibular Tooth Material Discrepancy.

According to the guidelines of the American and Indian Boards of Orthodontics, it is essential to include second molars, while managing an orthodontic case. Therefore, the present study was planned to determine maxilla-mandibular tooth material discrepancy.METHODSThe study sample consisted of study casts of 300 subjects in the age range of 18-30 years. Samples having a full complement of teeth with Angle’s Class I molar and canine relationships, good intercuspation, normal overjet and overbite and minimal crowding and spacing were included in the study. Tooth dimensions were measured using digital vernier caliper (accurate to 0.01 mm) and overall ratio was calculated. The data was statistically analysed for range, mean, standard deviation and coefficient of variation.RESULTSViVan ratio was found to be 90.79 with standard deviation of 3.13, variance of 9.81 and range was 83.55 - 95.82.CONCLUSIONSIdeal tooth proportions play an important role in achieving good occlusion at the end of orthodontic treatment. The ViVan ratio obtained in the study included second molars and this would benefit the orthodontist in proper treatment planning. This ratio will add importance for improved results at the finish of orthodontic treatment.

Comparison of Bolton s Ratio for Evaluation of Tooth Size Discrepancy between Maxillary and Mandibular Arches in Vidarbha Population

Bolton’s ratio is an indispensable parameter used in orthodontic diagnosis to evaluate the tooth size discrepancy. However, these norms have been established for Caucasian population and population variations necessitate the evaluation of these ratios for Vidarbha population. The objectives of the present study were to determine Bolton’s ratio for Vidarbha population, compare them with original Bolton’s ratios and determine the clinical significance of these differences.METHODSThe study sample consisted of study casts of 300 subjects in the age range of 18-30 years, all belonging to Vidarbha population, having a full complement of teeth. Tooth dimensions were measured using digital vernier caliper and Bolton’s overall ratio and anterior were calculated. The data calculated was statistically analysed for range, mean, standard deviation and coefficient of variation. Unpaired t-test was applied to draw a difference between the results of this study and the results from Bolton’s study.RESULTSBolton’s overall and anterior ratio norms for Vidarbha population sample were found to be 88.15 and 78.50, respectively, with standard deviation of 3.27 and 3.19, respectively. The range of overall ratio noted was 80.36–98.44, and the range of anterior ratio was 67.74–89.70.CONCLUSIONSIn general, the values obtained from this study for the Vidarbha population differ from the data of Caucasian population. So, it can be inferred that the established Bolton’s values for Caucasians cannot be used for the Vidarbha population. Hence, population specific standards are necessary for clinical assessment.

A study on the anterior tooth size discrepancies among orthodontic patients with varying malocclusions / 대한치과교정학회지

Bolton analysis is widely used to predict tooth size discrepancy, but its accuracy has been challenged. The purpose of this study was to describe true anterior tooth size discrepancies among orthodontic patients and to evaluate the factors that affect true anterior tooth size discrepancies. The subjects consisted of 80 patients with varying malocclusions (Class I, Class II, Class III, and Class III surgery) who were treated orthodontically. Pre-treatment models, set-up models from post-treatment models, and lateral cephalometric radiographs were analyzed. The results were as follows. The means, the standard deviations, and ranges of anterior Bolton ratio in the present study were somewhat higher than those of Bolton's samples and Korean normal samples. The number of patients showing maxillary deficiency was larger than that of patients showing maxillary excess in view of true anterior discrepancies. There was a significant difference between anterior Bolton discrepancy from pre-treatment models and true anterior discrepancy from set-up models (p 0.05). And there was also no significant difference between the male and female groups (p > 0.05). Overbite and the incisal edge thickness of maxillary anterior teeth have little relationship with true anterior discrepancies. Multiple regression analysis showed that true anterior discrepancy was mainly determined by anterior Bolton ratio, upper incisor to occlusal plane angle after treatment, interincisal angle after treatment, and upper right lateral incisor width.