Résumé
Abstract This study was aimed to evaluate the fit of occlusal veneer restoration for two CAD/CAM materials with different cement space settings, using microCT scans. Sixty resin dies were made and divided into two groups (n=30) according to the materials, (I): Hybrid all-ceramic, and (II): zirconia-reinforced lithium silicate glass-ceramic. Each group was subdivided into three subgroups (n=10) according to the cement space parameters (30, 40, and 50 µm). Occlusal veneers for the six subgroups were milled. A circle with 20 different sections was placed at the center of every scanned specimen to measure four different locations (Occlusal, Axial, Marginal, and Absolute marginal discrepancy). Data were analyzed using two-way ANOVA at a 0.05 level of significance. There was no statistically significant effect of material type on the mean values of internal and marginal gaps for the three cement space parameters (P>0.05). There were no statistically significant differences in the occlusal and axial gap between the cement space parameters, furthermore, there were statistically significant differences in marginal gap distances and absolute marginal discrepancies (P>0.05). Hybrid all-ceramic showed smaller marginal and internal discrepancies than zirconia-reinforced lithium silicate glass-ceramic without statistically significant differences, and, for both materials, 50 µm cement space significantly improved the marginal fit and absolute marginal discrepancy.
Resumo Este estudo teve como objetivo avaliar o ajuste da restauração de facetas oclusais para dois materiais CAD/CAM com diferentes configurações de espaço de cimento, usando microCT. Foram feitos sessenta moldes de resina e divididos em dois grupos (n=30) de acordo com os materiais, (I): cerâmica pura híbrida, e (II): cerâmica de vidro de silicato de lítio reforçada com zircónia. Cada grupo foi subdividido em três subgrupos (n=10), de acordo com os parâmetros do espaço de cimento (30, 40, e 50 µm). As facetas oclusais para os seis subgrupos foram fresadas. Um círculo com 20 secções diferentes foi colocado no centro de cada amostra digitalizada para medir quatro locais diferentes (Oclusal, Axial, Marginal, e discrepância marginal absoluta). Os dados foram analisados utilizando ANOVA bidireccional a um nível de significância de 0,05. Não houve efeito estatisticamente significativo do tipo de material nos valores médios das aberturas internas e marginais para os três parâmetros do espaço de cimento (P>0,05). Não houve diferenças estatisticamente significativas no intervalo oclusal e axial entre os parâmetros do espaço de cimento, além disso, houve diferenças estatisticamente significativas nas distâncias do intervalo marginal e discrepâncias marginais absolutas (P>0,05). A cerâmica pura híbrida mostrou discrepâncias marginais e internas menores do que a cerâmica de vidro de silicato de lítio reforçada com zircónia sem diferenças estatisticamente significativas, e, para ambos os materiais, 50 µm de espaço de cimento melhoraram significativamente o ajuste marginal e a discrepância marginal absoluta.
Résumé
OBJECTIVE@#To investigate the effects of preparation height and cement space on the fit and retention of computer aided design (CAD)/computer aided manufacturing (CAM) zirconia crown, and to provide reference for the clinical design and fabrication of CAD/CAM crowns.@*METHODS@#3D printing system was used to fabricate resin abutment teeth with convergence angle of 2° and height of 1-3 mm. The models' optical impressions were collected by the three-shape scanner. Then, the cement spaces were set by Cradle CAD/CAM system at 10-50 μm to create an all-ceramic zirconia crown. The fit of the crowns was measured by using silicone rubber interstitial impression method. The retention of the crowns was measured by pull-off test with uniaxial tensile force after the crown was bonded. The data were analyzed by SPSS 22.0 soft-ware.@*RESULTS@#When the preparation height was fixed, the fitness values of different cement space groups have statistical difference (P0.05). The fitness values of different preparation height groups have no statistical difference (P>0.05), and the retention values of different preparation height groups have statistical difference (P0.05).@*CONCLUSIONS@#When cradle CAD/CAM system is used to create a full crown in the clinic, the preparation height should be set to more than 3 mm, and the cement space should be set at 30 μm.
Sujets)
Conception assistée par ordinateur , Couronnes , Porcelaine dentaire , Conception de prothèse dentaire , ZirconiumRésumé
Objective: The purpose of this study was to evaluate the effect of finish line design and cement space thickness on the marginal accuracy of monolithic zirconia crowns. Materials and methods: Thirty crowns were fabricated from translucent zirconia (inCoris TZI) using Cerec in-Lab system and divided into three main groups (10 each) according to the finish line type of the die (knife-edge, chamfer, and shoulder). Every group was divided into two subgroups (5 each) according to cement space thickness (20 and50µm). Optical impressions were taken for the dies using the Cerec scanner and cement space was set twice for every finish line design; 20 and 50 µm. The completed crowns were cemented to the dies and the marginal gap was evaluated. The collected data was statistically analyzed using Mann-Whitney U test and Kruskal-Wallis test and the significance level was set at P ≤ 0.05. Results: Regarding the marginal gap; there was no statistically significant difference between different finish line designs or between different cement space thicknesses. Conclusion: Neither finish line design nor cement space thickness has an effect on the marginal gap of inCoris TZI crowns. (AU)
Declaração do problema: A necessidade de um método minimamente invasivo de preparação de coroa única é inevitável, principalmente com dentes enfraquecidos e com alta probabilidade de irritação pulpar. Portanto, é necessária uma restauração durável e adaptada, com preparação menos invasiva da linha de término. Objetivo: O objetivo deste estudo foi avaliar o efeito do design da linha de término e da espessura do espaço de cimento na precisão marginal das coroas monolíticas de zircônia. Material e Métodos: Trinta coroas foram fabricadas a partir de zircônia translúcida (inCoris TZI) usando o sistema Cerec em laboratório, e divididas em três grupos principais (n = 10), de acordo com o tipo de linha de término da matriz (lâmina, chanfro e ombro). Cada grupo foi dividido em dois subgrupos (5 cada), de acordo com a espessura do espaço do cimento (20 e 50 µm). Impressões ópticas foram obtidas para as matrizes usando o scanner Cerec e o espaço de cimento foi definido duas vezes para cada projeto de linha de chegada: 20 e 50 µm. As coroas confeccionadas foram cimentadas nos moldes e a diferença marginal foi avaliada. Os dados coletados foram analisados estatisticamente pelo teste U de Mann-Whitney e Kruskal-Wallis e o nível de significância foi estabelecido em P ≤ 0,05. Resultados: Em relação ao gap marginal não houve diferença estatisticamente significante entre diferentes projetos de linha de acabamento ou entre diferentes espessuras de espaço de cimento. Conclusão: nem o design da linha de término, nem a espessura do espaço de cimento afetam a folga marginal das coroas inCoris TZI. (AU)
Sujets)
Adaptation marginale (odontologie) , Couronne dentaire , Ciments dentairesRésumé
Objective To study the influence of the convergence angle and cement space on the fit of CAD/CAM all-ceramic crowns.Methods The PMMA resin was produced in two groups,group A (2 degrees) and group B (4 degrees),30 in each group,and each group was divided into 3 sub-groups A 1,A2,A3;or B 1,B2,B3.Each subgroup included 10 patients with a CAD/CAM all-ceramic crown with PMMA resin generation type,but the cement space was 40 μm,60 μm,or 80 μm.The internal clearance edge of the double color silicone rubber impression reproduction technology of the all-ceramic crown was observed under the microscope.Analysis Micro-image software was used to measure the edge gap,and the resulting data were analyzed using SPSS 20.0 software.Results When the cement space is the same,the difference between 2 degrees and 4 degrees was statistically significant.Conclusion The fit is the best when the cement space is 60 μm and the convergence angle space is 4 degrees.
Résumé
PURPOSE: The aim of this study was to compare the passivity of implant superstructures by assessing the strain development around the internal tapered connection implants with strain gauges. MATERIALS AND METHODS: A polyurethane resin block in which two implants were embedded served as a measurement model. Two groups of implant restorations utilized cement-retained design and internal surface of the first group was adjusted until premature contact between the restoration and the abutment completely disappeared. In the second group, only nodules detectable to the naked eye were removed. The third group employed screw-retained design and specimens were generated by computer-aided design/computer-aided manufacturing system (n=10). Four strain gauges were fixed on the measurement model mesially and distally to the implants. The strains developed in each strain gauge were recorded during fixation of specimens. To compare the difference among groups, repeated measures 2-factor analysis was performed at a level of significance of alpha=.05. RESULTS: The absolute strain values were measured to analyze the magnitude of strain. The mean absolute strain value ranged from 29.53 to 412.94 microm/m at the different strain gauge locations. According to the result of overall comparison, the cement-retained prosthesis groups exhibited significant difference. No significant difference was detected between milled screw-retained prostheses group and cement-retained prosthesis groups. CONCLUSION: Within the limitations of the study, it was concluded that the cement-retained designs do not always exhibit lower levels of stress than screw-retained designs. The internal adjustment of a cement-retained implant restoration is essential to achieve passive fit.