Tratamento integrado para correção do sorriso gengival: relato de caso / Integrated treatment for correction of gingival smile: case report

O sorriso gengival possui inúmeras causas, podendo acontecer por motivos esqueléticos, musculares ou por alteração no desenvolvimento dos tecidos de suporte. No entanto, na atualidade, a estética vermelha e a branca têm se apresentado completamente passíveis de transformações e com uma gama de procedimentos cirúrgicos ou não cirúrgicos para sanar as queixas dos pacientes. O objetivo geral deste trabalho é mostrar o poder que a odontologia tem frente às questões estéticas, como, por exemplo, a vergonha de sorrir por não se sentir confortável com os dentes curtos e com uma grande faixa de gengiva sendo exposta. O método utilizado foi um relato de caso. Que descreve todos os passos clínicos do tratamento de um paciente de 40 anos, que estava insatisfeita com o seu sorriso por apresentar erupção passiva alterada juntamente com hiperatividade do lábio superior. O plano de tratamento escolhido foi de realizar a cirurgia de aumento de coroa clínica estético, seguido de clareamento dentário e posteriormente um reposicionamento labial, com ajuda da toxina botulínica. Finalizando, para ajudar na cicatrização, o uso de laserterapia. O resultado de todo o processo cirúrgico envolvido neste trabalho, é satisfação do paciente, materializando o sonho deste, devolvendo segurança e espontaneidade ao sorrir. Pôde-se observar que através da combinação de técnicas cirúrgicas periodontais para tratar o sorriso gengival, obtém-se êxito tanto no sentido científico quanto no biológico, alcançando um sorriso esteticamente mais atrativo(AU)

Gummy smile has numerous causes, which can occur for skeletal or muscular reasons or due to changes in the development of supporting tissues. However, nowadays, the red and white aesthetics have been completely capable of transformation and with a range of surgical or non-surgical procedures to resolve patients' complaints. The general objective of this work is to show the power that dentistry has in the face of aesthetic issues, such as, for example, the shame of smiling due to not feeling comfortable with short teeth and a large strip of gum being exposed. The method used was a case report. Which describes all the clinical steps of the treatment of a 40-year-old patient, who was dissatisfied with her smile due to an altered passive eruption together with hyperactivity of the upper lip. The chosen treatment plan was to perform aesthetic clinical crown augmentation surgery, followed by tooth whitening and later lip repositioning, with the help of botulinum toxin. Finally, to help with healing, the use of laser therapy. The result of the entire surgical process involved in this work is patient satisfaction, materializing the patient's dream, restoring security and spontaneity when smiling. It was observed that through the combination of periodontal surgical techniques to treat gummy smile, success is achieved both in the scientific and biological sense, achieving a more aesthetically attractive smile(AU)

Tratamiento de Sonrisa Gingival. Informe de Caso

El recontorneo estético es una cirugía plástica periodontal que tiene como objetivo restablecer una sonrisa más armoniosa de acuerdo al aspecto facial del paciente, el principal motivo para realizar este procedimiento es cuando existe un diagnóstico de una erupción pasiva alterada o sonrisa gingival. La sonrisa gingival es una de las principales preocupaciones de acuerdo a la estética cuando existe una exposición gingival de más de 3 mm en lo cual es justificable realizar el recontorneo estético. Paciente femenino de 28 años de edad, con diagnóstico de erupción pasiva alterada 1B con un seguimiento de 4 meses. El tratamiento consistió en realizar el recontorneo estético para corregir la sonrisa gingival. El recontorneo estético es un procedimiento quirúrgico que se realiza con el objetivo de mejorar la estética del paciente cuando existe una exposición gingival excesiva y para facilitar la armonía de acuerdo a su aspecto facial.

Esthetic recontouring is a periodontal plastic surgery that aims to restore a more harmonious smile according to the patient's facial appearance, since the main reason to perform this procedure is when there is a diagnosis of an altered passive eruption or gingival smile. The gingival smile is one of the main concerns according to aesthetics when there is a gingival exposure of more than 3 mm in which it is justifiable to perform the aesthetic recontouring. 28-year-old female patient with a diagnosis of altered passive eruption 1B with a 4-month follow-up. Treatment consisted of esthetic recontouring to correct the gingival smile. Esthetic recontouring is a surgical procedure performed with the aim of improving the patient's esthetics when there is excessive gingival exposure and to facilitate harmony according to facial appearance.

Aesthetic Crown Lengthening: Case Reports

The crown lengthening is indicated for aesthetic purposes, exposure of subgingival caries, crown fractures or a combination of these, which can be characterized as aesthetic or functional, related to restorative indications, and restoration of biological width. Several factors need to be evaluated in the aesthetic planning for optimizing the smile, with the inclusion of an increase in the clinical crown, emphasizing the quality of the thin or thick periodontal phenotype, an adequate band of keratinized tissue and the size of the biological width. A correct diagnosis of the gummy smile etiology, as well as an assessment of clinical characteristics and anatomical dimensions, is of fundamental importance prior to the patient's approach. It determines and guide decisions regarding the possibilities of treatment and prognosis of cases. The aim of this study was to report two cases of cosmetic periodontal surgery with techniques commonly used for this purpose: gingivectomy and flap surgery with osteotomy.

El alargamiento clínico de corona está indicado con fines estéticos, exposición de caries subgingivales, fracturas coronarias o alguna combinación de estas, y puede caracterizarse como estético o funcional, relacionado con indicaciones restaurativas y restauración del espacio biológico. Varios factores deben ser evaluados en la planificación estética para optimizar la sonrisa, con la inclusión del aumento clínico de coronas, destacando la calidad del fenotipo periodontal delgado o grueso, la gama adecuada de tejido queratinizado y la dimensión del espacio biológico. Un diagnóstico correcto de las causas asociadas a la sonrisa gingival, así como una valoración de las características clínicas y dimensiones anatómicas, son de fundamental importancia antes de abordar al paciente, para determinar y orientar decisiones respecto a las posibilidades de tratamiento y pronóstico de los casos. El objetivo de este estudio fue reportar dos casos de cirugía periodontal estética con técnicas comúnmente utilizadas para este fin: gingivectomía y cirugía de colgajo con osteotomía.

Tratamento do sorriso gengival por meio da cirurgia periodontal: relato de caso / Treatment of gummy smile through periodontal surgery: case report

A busca por um sorriso considerado perfeito tem sido cada vez maior e isso tem se tornado um desafio para o Cirurgião-Dentista, visto que um sorriso harmônico não envolve somente dentes, mas também gengiva. A exposição excessiva da gengiva ao sorrir ou falar é considerada uma característica antiestética, pois gera uma desarmonia entre dentes, gengiva e lábios. Quando o paciente expõe 3 milímetros ou mais de gengiva ao sorrir, chamamos essa exposição de Sorriso Gengival. O presente trabalho tem como objetivo relatar o tratamento de um caso de sorriso gengival, onde foi realizada cirurgia periodontal ressectiva a fim de diminuir a exposição de tecido gengival ao sorrir. Descrição do caso: Paciente adulto 21 anos, sexo masculino, procurou atendimento no curso de graduação em Odontologia do Centro Universitário da Serra Gaúcha ­ FSG, com queixa de insatisfação estética devido ao tamanho de seus dentes e mostrar muito tecido Gengival ao sorrir. Após anamnese, exame clínico e radiográfico, o paciente foi diagnosticado com Sorriso gengival. O plano de tratamento proposto foi de cirurgia periodontal ressectiva. Conclusão: A partir do exposto, podemos concluir que o tratamento do sorriso gengival depende de sua etiologia. Um correto diagnóstico é de extrema importância, pois dependendo do fator etiológico do sorriso gengival, o plano de tratamento pode ser elaborado de acordo com a necessidade do paciente. No caso apresentado, o procedimento escolhido, cirurgia periodontal ressectiva, se mostrou efetivo no tratamento do sorriso gengival, devolvendo estética e satisfação ao paciente(AU)

The search for a smile that is considered perfect has been increasing and this has become a challenge for the Dental Surgeon, since a harmonious smile does not only involve teeth, but also gums. Excessive exposure of the gums when smiling or talking is considered an unsightly feature, as it creates disharmony between teeth, gums and lips. When the patient exposes 3 millimeters or more of gum when smiling, we call this exposure Gummy Smile. The present work aims to report the treatment of a case of gummy smile, where resective periodontal surgery was performed in order to reduce the exposure of gingival tissue when smiling. Case description: A 21-year-old adult patient, male, sought care at the undergraduate course in dentistry at the Centro Universitário da Serra Gaúcha ­ FSG, complaining of aesthetic dissatisfaction due to the size of his teeth and showing a lot of gingival tissue when smiling. After anamnesis, clinical and radiographic examination, the patient was diagnosed with gummy smile. The proposed treatment plan was resective periodontal surgery. Conclusion: From the above, we can conclude that the treatment of gummy smile depends on its etiology. A correct diagnosis is extremely important, because depending on the etiological factor of the gummy smile, the treatment plan can be elaborated according to the patient's needs. In the case presented, the chosen procedure, resective periodontal surgery, proved to be effective in the treatment of gummy smile, restoring aesthetics and patient satisfaction(AU)

Cone-beam computed tomography study of root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology in high-angle Class Ⅱ open bite patients / 口腔疾病防治

Objective@#This study aimed to explore the root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology in patients with high-angle skeletal Class Ⅱ open bite, aiming to provide a reference for clinical treatment.@*. Methods@#This study was reviewed and approved by the Ethics Committee, and informed consent was obtained from the patients. CBCT images of eighty-one untreated patients (40 anterior open bite patients and 41 normal overbite patients) with high-angle skeletal Class Ⅱ malocclusion were selected before treatment. Dolphin software was used to study the root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology, and the differences between the two groups were analyzed.@*Results@#There was no statistical significance in the root length of maxillary lateral incisor and canine between the open bite group and the normal overbite group, significant differences were found in the root length of maxillary central incisor （11.12 ± 1.37） mm、mandibular central incisor（10.15 ± 1.09）mm, mandibular lateral incisor（11.27 ± 1.15）mm and mandibular canine（12.81 ± 1.48）mm between the open bite group and the normal overbite group（P<0.05）. On the other hand, the two groups were significantly different in crown-root morphology of the maxillary central incisor (1.10° ± 3.62° vs. 4.53° ± 2.30°, P<0.01) but not in the mandibular central incisor.@*Conclusion@#The root length of the maxillary central incisor, mandibular central incisor, mandibular lateral incisor, mandibular canine in high-angle Class Ⅱ open bite patients is shorter than that in high-angle Class Ⅱ normal overbite patients, and the long axis of the crown of the maxillary central incisor in high-angle Class Ⅱ open bite patients obviously deviates toward the labial side relative to the long axis of the root. The crown-root angle is smaller, which is beneficial to torque control or adduction movement of the anterior teeth in high-angle Class Ⅱ open bite patients.

A Fractured Maxillary Canine Restored with a Full Ceramic Crown and Class III Malocclusion

@#A perfect smile always relates to well-aligned teeth. Factors such as fracture, malocclusion, and tooth migration challenge a clinician to restore a patient’s appearance and functionality. This case report presented a 32-year-old Malay male patient concerns on his appearance because of a fractured maxillary canine due to motor vehicle accident. There has been no restoration on the tooth since three years ago. After obtaining the patient’s agreement, a full ceramic crown was constructed despite being complicated by Class III malocclusion. It is challenging to improve aesthetics and longevity for this patient with a midline shift and diastema of the lower arch, anterior cross bite of tooth 12, and an open bite between teeth 14 and 44. After discussion, the patient agreed and decided on a full ceramic crown of tooth 23 despite being challenged to achieve an ideal occlusion. The patient was satisfied with the crown’s quality and aesthetic.

Application of bioactive ceramics iRoot BP Plus? in pulpotomy for complicated crown fracture of immature permanent anterior teeth in children / 北京大学学报(医学版)

Objective:To analyze the clinical and radiographic effectiveness of a calcium silicate-based bioactive ceramic iRoot BP Plus? pulpotomy of immature permanent teeth with complicated crown fracture and to evaluate the factors influencing its long-term success rate.Methods:The digital medical records of patients under 13 years old who had undergone iRoot BP Plus? pulpotomy in the Department of Oral Emergency or the First Clinical Division,Peking University School and Hospital of Stomatology from March 2017 to September 2022 due to complicated crown fracture of anterior teeth,and had taken at least one post-operation apical radiograph were reviewed.The clinical and radiographic information at the initial examination and follow-up period were obtained,including crown color,mobility,percussion,cold test(partial pulpotomy teeth),dental restoration,fistula,swelling or inflammation of the gingival tissue,the formation of apical foramen,pathologic radiolucency and calcification of pulp chamber or root canal obliteration.Data were tested by Fisher exact test and a multiple comparison.Results:In the study,64 patients including 37 males(57.8％)and 27 females(42.2％)with a mean age of 9.1 years were finally enrolled.The total number of permanent teeth that received pulpotomy was 75,and the average follow-up time was 19.3 months.The success rate was 93.1％with the time interval between dental injury and treatment in 24 h,while the success rate dropped to 88.2％with the time intervals beyond 24 h.The time intervals did not significantly affect the pulp survival rate(P=0.61)after pulpotomy(partial or co-ronal).The success rate 6 months after pulpotomy was 96.0％,and one-year success rate was 94.7％.A total of 23 cases were reviewed for more than 2 years after pulpotomy,and 6 cases failed.The mobility had no significant effect on the success rate(P=0.28).Pulp chamber calcification and pulp canal obli-teration were not observed in all the post-operative radiographs.Conclusion:The one year clinical and radiographic success rates obtained in this study indicate that iRoot BP Plus? is an appropriate pulp cap-ping material option for pulpotomy treatment of complicated crown fracture in immature permanent teeth without displacement injuries.This technique has broad promotional value.

The effects of mesh reduction on the volume and trueness of single-crown restorations / 实用口腔医学杂志

Objective:To assess the impact of reducing the mesh density on the overall volume and trueness of single-crown restora-tions.Methods:15 single-crown restorations were included,and their mesh density in 3D software was simplified by 75％,50％,25％,10％and 5％respectively.The overal volume,file size and mesh edge length of the restorations with different reduction levels were compared.Deviation analysis was conducted by curving clipping the area of the shoulder,tissue surface(except for the shoulder)and occlusal surface of the restorations and compared with those of the corresponding regions in the non-simplified restorations.Trueness was assessed using the root mean square(RMS)values for the volume and trueness of different areas.Results:Reducing the mesh den-sity did not significantly affect the overal volume of the single-crown restorations(P＞0.05),but it had a significant impact on the file size(P＜0.001),mesh edge length(P＜0.001)and the trueness of the shoulder(P＜0.001),tissue surface(except for the shoulder)(P＜0.001)and occlusal surface(P＜0.001)areas.Conclusion:Reducing the mesh density had little impact on the overall volume of the restorations but significantly affected their trueness.

Application of socket-shield technique for immediate implant placement and provisionalization in esthetic zone: a case report and literature review / 口腔疾病防治

Objective@#To investigate the effect of the socket-shield technique (SST) concurrent with immediate implant placement and provisionalization (IIPP) in the aesthetic restoration of anterior teeth.@*Methods@#A case of maxillary anterior tooth stumps with a thin labial bone wall was treated with SST for preservation of labial soft and hard tissue fullness, combined with an immediate implant placement and immediate provisional crown for restoring the shape of the tooth and gingival molding@*Results@#Immediate implant placement and provisionalization restored the morphology and function of the affected tooth in the shortest possible time. The patient's labial soft and hard tissue contours in the affected tooth area were well preserved in the 18-month follow-up after the application of the SST, which presented a better aesthetic result. The literature review indicates that the indications for SST are unrestorable maxillary anterior teeth, whose dental, periodontal and periapical tissues are healthy and intact. In the esthetic zone, root shielding is effective in maintaining the soft and hard tissue contour on the labial side of the implant. However, there is no consensus on the technical details of SST, such as the ideal coronal height and thickness of the shield, and the management of the gap between the shield and the implant. Thus, more clinical studies and histologic evidence are needed to provide a reference for clinical decision-making. In addition, digital technology can improve the accuracy of implant placement and shield preparation.@*Conclusion@#The correct application of SST combined with IIPP in the esthetic zone can ensure esthetic results. However, more high-quality evidence-based medical evidence is needed for its long-term efficacy, and indications should be strictly controlled during clinical application.

Research progress on dental materials for preventing root caries / 口腔疾病防治

@#The high incidence and untreated rate of root caries, a common and frequently occurring oral disease with challenging treatment in elderly individuals, is the main cause of tooth loss among elderly people, as rapid development results in pulpitis and periapical periodontitis or residual crown and root, which has been regarded as one of the common chronic oral diseases seriously affecting the quality of life of elderly people. Thus, early intervention and prevention are important. Traditional dental materials for preventing root caries have been widely used in clinical practice; however, they have the disadvantages of tooth coloring, remineralization and low sterilization efficiency. A series of new dental materials for preventing root caries have gradually become a research hotspot recently, which have the advantages of promoting the mineralization of deep dental tissue, prolonging the action time and enhancing adhesion. Future caries prevention materials should be designed according to the characteristics of root surface caries and the application population and should be developed toward simplicity, high efficiency and low toxicity. This review describes current research regarding anti-caries prevention material application, serving as a theoretical underpinning for the research of root caries prevention materials, which is important for both promotion in the effective prevention of root caries and improvement in the status of oral health and the quality of life among old people.

Research progress on the mechanical compatibility of restorative materials with dental tissue / 口腔疾病防治

@#As the main means of mastication, teeth can withstand countless functional contacts. The mechanical properties of teeth are closely related to their tissue structure. Enamel and dentin have a high hardness and modulus of elasticity, and their graded structure allows them to withstand bite forces without being susceptible to fracture. When tooth tissue is defective, full crown restoration is often needed to restore the normal shape and function of the tooth. Metal materials, ceramic materials, and polyetheretherketone (PEEK) materials are commonly used for crown restoration. Metal materials have certain disadvantages in terms of aesthetics and are relatively rarely used in clinical practice. Ceramic materials with different compositions exhibit differences in performance and aesthetics, but their elastic modulus and hardness are much higher than those of dental tissue, resulting in mismatching mechanical properties. In contrast, the elastic modulus of PEEK is lower than that of tooth tissue and similar to that of bone tissue, but its properties can be improved by fiber reinforcement. Notably, when the mechanical properties of a restoration material and tooth tissue are not fully matched, the interface between them often forms a potential weak link, which ultimately affects the stability and long-term effect of the restoration. This article introduces the mechanical properties and corresponding structural characteristics of enamel and dentin. On this basis, the advantages and limitations of existing restoration materials are analyzed, and the possibility of biomimetic design of full crowns is further explored.

Three-dimensional finite element analysis of distal proximal occlusal defect of short crown molar restored with endocrown / 中国组织工程研究

BACKGROUND:For teeth with normal dental crown height,pulp cavity retention crown restoration with different depths of the pulp cavity and different repair materials affects the stress and flexural strength of tooth tissue.For short crown molar defects,the research on pulp cavity repair mainly focuses on clinical observation and in vitro flexural strength experiments. OBJECTIVE:To establish a three-dimensional finite element model for short crown molar restored by the endocrown after root canal treatment to analyze the effects of different pulp cavity retention depths and different repair materials on the distribution and size of dentin equivalent stress. METHODS:Based on establishing the complete model of the short crown mandible first molar,a three-dimensional finite element model was established for repairing the distal adjacent defect of the short crown molar with different pulp cavity retention depths(h=2,3,4 mm)and different repair materials(zirconia,lithium disilicate).Under the oblique loading,the equivalent stress distribution was observed.The peak value of dentin equivalent stress and the mean value of equivalent stress near the bottom of the mesial pulp cavity wall were calculated. RESULTS AND CONCLUSION:(1)Equivalent stress concentration areas:The stress of complete short crown molar and restored models mainly concentrated in the mesial root mesial neck and mesial root lingual neck.The stress concentration area was found in the mesial pulp cavity wall corresponding to the bottom layer of restored models,and the stress concentration was obvious in the 4 mm retention depth group.(2)Under the same repair material,the peak value of dentin equivalent stress was the lowest at 3 mm for all models after repair.The average value of equivalent stress near the bottom of the mesial pulp cavity wall was lowest at 3 mm.(3)Under the same retention depth,there was no significant difference between the two materials in the dentin equivalent stress peak and the mean value near the bottom of the mesial pulp cavity.(4)The results showed that under the conditions of this experiment,the endocrown was used to repair the defect of the short crown molar and the retention depth was 3 mm,which was more beneficial to protect the remaining dental tissue.The selection of zirconia or lithium disilicate as the repair material had little effect on the dentin stress.

Application of digital scanning combined with reverse engineering technology in the teaching of full crown preparation / 中华医学教育探索杂志

Objective:To investigate the application of digital scanning combined with reverse engineering technology in the teaching of full crown preparation.Methods:A total of 30 undergraduate students in the fifth grade of stomatology were selected from Shantou University Medical College and were divided into experimental group and control group using a random number table. Two resin teeth were distributed to each student and were placed on dental head simulators to perform full crown preparation. The students in the control group received teaching with analogies of experience, and those in the experimental group received teaching with digital scanning, i.e., full crown preparation for the second time after digital scanning for the first time of full crown preparation. The score was determined based on China Stomatological Association Standards: Guideline for the tooth preparation of dental ceramic crowns (T/CHSA 008—2023), with a total score of 100 points. SAS9.4 software was used for the two-independent-samples t test and the paired t-test, and the Kendall W concordance coefficient was used to investigate the consistency of evaluators. Results:There were significant changes after teaching in the preparation scores of the right maxillary central incisor (76.27 pre-demonstration vs. 84.70 post-demonstration, P<0.001) and the right maxillary first molar (72.10 pre-demonstration vs. 82.37 post-demonstration, P<0.001). Compared with the control group, the experimental group had a significant increase in the mean preparation score of the right maxillary first molar (14.00 vs. 6.53, t=2.64, P=0.014). In the experimental group, there were significant increases in the preparation scores of the right maxillary first molar for the occlusal surface (15.40 pre-demonstration vs. 19.33 post-demonstration, P<0.001), the buccolingual surface (18.13 pre-demonstration vs. 20.87 post-demonstration, P=0.016), and the proximal surface (12.40 pre-demonstration vs. 14.07 post-demonstration, P=0.004), as well as significant increases in the scores of the convergence angles of the buccolingual surface (2.80 pre-demonstration vs. 4.07 post-demonstration, P=0.004) and the proximal surface (3.47 pre-demonstration vs. 4.47 post-demonstration, P=0.008). Conclusions:Application of digital teaching for difficult crown preparation of posterior teeth can effectively improve the quality of crown preparation among students, standardize the teaching process of crown preparation, and increase the precision of crown preparation, thereby laying a foundation for promoting uniformity in talent cultivation for dental prosthodontics.

Influence of fabrication method on the marginal fit of temporary restorations

Abstract Computer-aided manufacturing (CAM) technology allows the use of different manufacturing techniques. This in vitro study aimed to evaluate the marginal fit of temporary restorations manufactured using conventional chairside methods, milling, and three-dimensional printing. Fifteen 3-element temporary restorations specimens were produced and categorized into three groups: non-digital, obtained using the conventional chairside method (GC); milled (GM); and three-dimensionally printed (GP). Marginal fit was assessed using scanning electron microscopy (SEM) performed under two conditions: one with only the central screw tightened, and the other with all three screws tightened. Horizontal misfit values were categorized as over-, equal-, and under-extended and qualitatively analyzed. Statistical analysis was performed using the Tukey-Kramer test (α=0.05). In the vertical assessment, three-dimensionally printed restorations demonstrated greater misfit than restorations obtained by milling and the conventional chairside method (P<0.05). In the horizontal assessment, the misfit in the GP group was significantly higher than that in the GM and GC groups. Restorations obtained using the conventional chairside method and milled provisional restorations showed more favorable results than three-dimensionally printed restorations.

Aesthetic Dentistry - What You Decided and What I Want: Shade Selection

ABSTRACT Objective: To assess the relationship between patients' and dentists' perceptions of shade selection and its impact on satisfaction with the prosthesis. Material and Methods: A single group pre-post study was conducted at the Prosthodontics department of a teaching hospital in India. One hundred ten participants were selected through a systematic random sampling technique with inclusion and exclusion criteria. Patients' attitudes regarding the aesthetics of their maxillary anterior teeth were recorded using a validated questionnaire. Shades for the intended prosthetic crown selected by the dentist and chosen by the patient were recorded separately, and patient satisfaction with the appearance of the final prosthesis was recorded. We used descriptive statistics followed by Pearson's Chi-square test and a binomial logistic regression model for inferential statistics. Results: 109 participant's data were available for final analysis. Patients choose lighter shades than the dentist's selection, which is statistically significant (p=0.000). 73.4% were satisfied with the final prosthesis, and the binomial logistic regression model identified using patient-selected shade for the final prosthesis was significantly associated with patients' satisfaction with the final prosthesis (OR=3.3, p=0.001). Conclusion: The patient's preference should be considered with the dentist's option when selecting a shade to create good esthetics.

Reposicionamiento Labial. Caso Clínico

El reposicionamiento labial es un procedimiento quirúrgico mínimamente invasivo que se utiliza para tratar una sonrisa gingival, la cual, es una afección en la que una cantidad significativa de la encía queda expuesta cuando una persona sonríe y puede deberse a una variedad de factores, como un exceso de tejido gingival, un labio superior corto o músculos hiperactivos del labio superior, entre otros. El alargamiento clínico de la corona, por otro lado, consiste en eliminar el exceso de tejido gingival y, si es necesario, el tejido óseo para exponer una mayor parte de la corona natural del diente. Se reporta un caso clínico de paciente femenino de 31 años que presentó una sonrisa gingival provocada por hipermovilidad de labio superior y un exceso de tejido gingival localizado. El plan de tratamiento involucró una combinación de reposicionamiento labial y alargamiento de corona. Los resultados estéticos fueron significativos, con la sonrisa del paciente más equilibrada y proporcionada. Se redujo la cantidad de tejido gingival expuesto cuando la paciente sonreía y la longitud de los dientes fue más visible, lo que dio como resultado una sonrisa de aspecto más natural, además de aumentar su aceptación al sonreír.

SUMMARY: Lip repositioning is a minimally invasive surgical procedure used to treat a gummy smile, which is a condition in which a significant amount of the gum is exposed when a person smiles and may be due to a variety of factors, such as excess gum tissue, a short upper lip or overactive muscles of the upper lip, among others. Clinical crown lengthening, on the other hand, involves removing excess gingival tissue and, if necessary, bone tissue to expose more of the natural crown of the tooth. Clinical case: A clinical case of a 31-year-old female patient who presented a gummy smile caused by hypermobility of the upper lip and an excess of localized gingival tissue is reported. The treatment plan involved a combination of lip repositioning and crown lengthening. The aesthetic results were significant, with the patient's smile more balanced and displayed. The amount of the patient's exposed gum tissue when smiled was reduced and the length of the teeth was more visible, resulting in a more natural-looking smile, as well as increasing their acceptance of smiling.

Adaptación marginal e interna de cofias fabricadas por métodos convencionales, CAD/CAM de fresado y sinterizado por láser / Marginal and internal adaptation of copings manufactured by conventional methods, CAD/CAM milling and laser sintering

Introducción: la adaptación marginal e interna de nuestras restauraciones fabricadas por fundición sistemas de fresado y sinterización láser es uno de los factores clínicos más importantes para el éxito de las prótesis fijas, previniendo el riesgo de microfiltración y enfermedad periodontal. Objetivo: evaluar la adaptación marginal e interna de cofias metálicas en aleación Cr-Co confeccionadas por técnicas convencionales, CAD/ CAM de fresado y sinterizado por láser. Material y métodos: estudio de tipo experimental, comparativo e in vitro. Se imprimió un modelo maestro en Cr-Co, proveniente del escaneo de un premolar preparado para corona completa, sobre el cual se diseñaron 30 cofias divididas en tres grupos: el primero que corresponde al grupo cofias fundidas fresadas en disco de cera A (A = 10), el segundo grupo cofias fresadas en disco de metal presinterizado B (B = 10) y el tercer grupo cofias impresas por sinterización láser C (C = 10). Se empleó la réplica de silicona, colocando silicona al interior de cada cofia, sobre el modelo maestro, simulando al cemento, mediante una máquina de ensayo universal se realizó una compresión de 50 N. Luego de retirar cada cofia se rellenaron con silicona pesada de adición, obteniendo una réplica de silicona. Se efectuaron dos cortes transversales en sentido vestíbulolingual y mesiodistal. Se observó el espesor de silicona VPS (vinil poliéter silicona) mediante un estereomicroscopio (Nikon SMZ745T), obteniendo valores en micrómetros. Para el análisis estadístico se utilizó el software SPSS 25 con el fin de realizar la prueba de normalidad y ANOVA de dos vías bajo un nivel de confianza del 95%. Resultados: el menor gap lo obtuvo el grupo de fresadas, seguido de las impresas y por último las fundidas por métodos convencionales. ANOVA de dos vías reveló diferencias estadísticamente significativas entre los tres grupos (p < 0.0001). Conclusiones: se encontró que el gap varía con cada método de fabricación, la técnica convencional de fundido mostró un mayor gap, ninguna excediendo el rango clínicamente aceptable (AU)

Introduction: the marginal and internal adaptation of our restorations manufactured by casting, milling systems and laser sintering is one of the most important clinical factors for the success of fixed prostheses, preventing the risk of microleakage and periodontal disease. Objective: evaluate the marginal and internal adaptation of metal copings in Cr-Co alloy made by conventional techniques, CAD/CAM milling and laser sintering. Material and methods: an experimental, comparative and in vitro study, a Cr-Co master model was printed from the scan of a premolar prepared for a full crown. An experimental, comparative and in vitro study, a Cr-Co master model was printed from the scan of a premolar prepared for a full crown, on which 30 caps divided into three groups were designed; the first group corresponds to the cast copings milled on a wax disc A (A = 10), the second group milled copings on a presintered metal disc B (B = 10) and the third group printed by laser sintering copings C (C = 10). The silicone replica was used, placing silicone inside each coping, on the master model, simulating cement, using a universal testing machine, a 50 N compression was performed. After removing each coping, they were filled with heavy addition silicone, obtaining a silicone replica. Two cross-sections were made in the buccolingual and mesiodistal direction., observing the thickness of the VPS (vinyl polyeter silicone) silicone using a stereomicroscope (Nikon SMZ745T), obtaining values in micrometers. For the statistical analysis, the SPSS 25 software was used in order to perform the normality and two-way ANOVA tests under a 95% confidence level. Results: the smallest gap was obtained by the milled group, followed by the printed ones and finally those cast by conventional methods. Two-way ANOVA revealed statistically significant differences between the three groups (p < 0.0001). Conclusions: the gap was found to vary with each fabrication method, the conventional casting technique showed a larger gap, none exceeding the clinically acceptable range (AU)

Restauração transcirúrgica: inter-relação periodontia e dentística / Transsurgical restoration: interrelationship between periodontics and dentistry

Tendo em vista a importância da relação Dentística Restauradora e Periodontia na Odontologia atual, o presente estudo demonstrou o relato de um caso clínico realizado no Complexo Odontológico do Centro Universitário da Serra Gaúcha (FSG), retratando um procedimento de restauração transcirúrgica em um paciente cujo elemento 13 estava comprometido com uma cavidade subgengival disto-palatino, sendo a resina composta o material restaurador de escolha. Este estudo teve como objetivo apresentar um caso clínico demonstrando a técnica de restauração transcirúrgica e a integração do planejamento entre Periodontia e Dentística Restauradora realizado na Clínica de Odontologia do Centro Universitário da Serra Gaúcha -FSG. Este trabalho mostrou a importância da realização de uma técnica cirúrgica e restauradora correta por parte dos cirurgiões-dentistas, assim como na verificação de que os tecidos periodontais podem reagir de forma positiva à presença de materiais restauradores adesivos posicionados subgengivalmente(AU)

In view of the importance of the restorative dentistry and periodontics relationship in current dentistry, the present study demonstrated the report of a clinical case carried out in the Dental Complex of the Centro Universitário da Serra Gaúcha - FSG, portraying a transsurgical restoration procedure in a patient whose element 13 was compromised with a subgingival cavity of this-palatine, the composite resin being the restorative material of choice. This study aimed to present a clinical case demonstrating the technique of transsurgical restoration and the integration of planning between Periodontics and Restorative Dentistry carried out at the Dentistry Clinic of the University Centro Universitário da Serra Gaúcha - FSG. This study showed the importance of performing a correct surgical and restorative technique by dentists, as well as in verifying that periodontal tissues can react positively to the presence of adhesive restorative materials positioned subgingival(AU)

Resorción intracoronal preeruptiva: una revisión de la literatura / Preeruptive intracoronal resorption: a review of the literature / Reabsorção intracoronária pré-eruptiva: uma revisão da literatura

RESUMEN La resorción intracoronal preeruptiva (RIPE) es un hallazgo radiográfico que consiste en la presencia de un área radiolúcida ubicada en la dentina coronal próxima a la unión amelodentinaria en el germen de una pieza dentaria; es usualmente singular y poco profunda (menor de 1/3 de la dentina cameral). La frecuencia reportada en la literatura varía entre 0,85 % y 27,3 %; no se ha encontrado asociación con el sexo; y afecta usualmente a las piezas posteriores. Su etiología no ha sido determinada, pero evidencias histológicas apuntan a que se trataría de secuelas de resorción dentinaria. Los defectos de la RIPE deben ser considerados como lesiones de caries una vez que la pieza erupcione en boca; y aunque no se han desarrollado esquemas de tratamiento o guías de práctica clínica, los tratamientos reportados dependen de la profundidad de los defectos y son frecuentemente conservadores. El objetivo de este trabajo fue revisar los estudios descriptivos y los reportes de casos publicados acerca de la RIPE para que estos defectos sean también considerados en la práctica clínica diaria.

ABSTRACT Preeruptive intracoronal resorption (PIRR) is a radiographic phenomenon characterized by the presence of a radiolucent area situated in the coronal dentin near the amelodentine junction within the tooth's germ. Typically, this radiolucent area is singular and shallow, encompassing less than one-third of the chambered dentin. The reported frequency in the literature varies between 0.85% and 27.3%. No association with gender has been identified, and it predominantly affects posterior teeth. While its precise etiology remains undetermined, histological evidence suggests that it results from a sequelae of dentin resorption. RIPE Defects as Caries Lesions: Once the tooth erupts into the oral cavity, RIPE defects should be regarded in a manner similar to caries lesions. Despite the absence of established treatment schemes or clinical practice guidelines, reported treatments are contingent upon the depth of the defects and frequently lean towards conservative approaches. The primary aim of this study was to comprehensively review descriptive studies and published case reports focusing on RIPE defects. This effort is directed towards integrating these defects into routine clinical practice considerations.

RESUMO A reabsorção intracoronária pré-eruptiva (RIPE) é um achado radiográfico que consiste na presença de uma área radiolúcida localizada na dentina coronária próxima à junção amelodentinária no germe de um dente. Geralmente, é singular e rasa, envolvendo menos de 1/3 da dentina da câmara. A frequência relatada na literatura varia entre 0,85% e 27,3%. Não foi encontrada associação significativa com o sexo, e a RIPE tende a afetar mais comumente os dentes posteriores. Sua etiologia ainda não foi totalmente determinada, mas evidências histológicas sugerem que pode ser consequência de reabsorção da dentina. Os defeitos de RIPE devem ser considerados como lesões de cárie quando o dente irrompe na cavidade bucal. Embora não tenham sido desenvolvidos esquemas de tratamento ou diretrizes de prática clínica específicas, os tratamentos relatados para RIPE são geralmente conservadores e baseiam-se na profundidade dos defeitos. Concluindo, a revisão dos estudos descritivos e dos relatos de casos de RIPE destaca a importância de considerar esses defeitos durante a prática clínica rotineira.

Biological sealing aspects surrounding anterior crowns on dental implants: clinical and photographic cases report

The biological sealing (BS) around implants is a dominant factor to determine the long-term success of peri-implant health. There are several features of the BS around implants in common with the soft tissue attached to teeth, such as the presence of crevicular fluid, acquired pellicle, epithelium; otherwise, the quality of the BS around implants is weaker compared with the junctional epithelium of natural teeth. Then, this article aimed to describe three cases report showing the presence of a BS (cuticle-crevice fluid-acquired pellicle) around the fixed crowns on dental implants in the anterior zone, through photographic analysis. It was used a Nikon 8100 camera with a 105 mm macro lens and a Macro Ring circular flash. A photographic profile examination was made always showing the clinical case and, specifically, the focal point in the crown-gingival tissue (prosthesis boundary and peri-implant tissue), highlighting the anatomical gingiva on the ceramic prosthetic crown at an angle between 140 to 160 degrees. Although cases 1 and 2 had 1-year follow-up and case 3 around 4 years, the common findings for all treatments done were: (i) oral rehabilitation with crowns on dental implants; (ii) patients satisfied with the esthetic and functional result; (iii) stability of the soft tissue around the crowns; (iv) all the patients had a good oral hygiene; (v) presence of a thin membrane associated with the acquire pellicle, similar to an annular cuticle, which we named cuticle-acquired pellicle complex or tertiary cuticle or prosthetic-implant cuticle. This complex (cuticle-crevicular fluid-acquired pellicle) is suggested to be the responsible by the BS on dental implants. Moreover, the cuticle (epithelial part in the peri-implant sulcus), although similar to teeth, may be considered a tertiary pellicle due to be found on ceramic crowns on dental implants, differently of the primary and secondary pellicle. Whitin the limitation of these three cases reports, the BS was reported and can be introduced the new concept of the "cuticle-crevicular fluid-acquired pellicle complex" or "prosthetic-implant cuticle".