Comparison of Cytocompatibility Between Grit Blasted Titanium Alloy (Ti-6Al-4V) with or without Pure Titanium Coating / 대한정형외과연구학회지

PURPOSE: A composite of aluminum and vanadium (Ti-6Al-4V) is one of the most common compositions of titanium-based alloys. Unfortunately, vanadium has been found to cause adverse reactions. We evaluated the effects of vanadium containing titanium alloy (Ti-6Al-4V) on an osteoblast-like cell line (SaOS-2). MATERIALS AND METHODS: We studied the biologic and morphologic responses of SaOS-2 cell to Ti alloy with grit blasting and Ti coated Ti alloy with grit blasting. We performed energy-dispersive x-ray spectroscopy (EDS) and scanning electron microscopy (SEM) investigations and performed a cell proliferation assay, ALP activity, and cell migration assay of SaOS-2 cells. RESULTS: The morphologic assessment of cells through SEM showed that the two surfaces were covered with similar amounts of small slender osteoblast like cells. The amount of proliferation, ALP activity and the migration extent of SaOS-2 cells on the surfaces of each group were not statistically different. CONCLUSION: We used a grit-blasted Ti-coated Ti alloy, coated using electron beam deposition, and a grit-blasted Ti alloy to evaluate the toxicity of Ti-6Al-4V on SaOS-2 cell. Compared with pure titanium, the vanadium-containing Ti-alloy did not show an adverse effect on SaOS-2 cells.

Histomorphometric study of machined titanium implants and calcium phosphate coated titanium implants / 대한치과보철학회지

PURPOSE: The objective of this study was to investigate the effects of calcium phosphate coated titanium implant surface on bone response and implant stability at early stage of healing period of 3 weeks and later healing period of 6 weeks. MATERIAL AND METHODS: A total of 24 machined, screw-shaped implants (Dentium Co., Ltd., Seoul, Korea) which dimensions were 3.3 mm in diameter and 5.0 mm in length, were used in this research. All implants (n = 24), made of commercially pure (grade IV) titanium, were divided into 2 groups. Twelve implants (n = 12) were machined without any surface modification (control). The test implants (n = 12) were anodized and coated with thin film (150 nm) of calcium phosphate by electron-beam deposition. The implants were placed on the proximal surface of the rabbit tibiae. The bone to implant contact (BIC) ratios was evaluated after 3 and 6 weeks of implant insertion. RESULTS: The BIC percentage of calcium phosphate coated implants (70.8 +/- 18.9%) was significantly higher than that of machined implants (44.1 +/- 16.5%) 3 weeks after implant insertion (P = 0.0264). However, there was no significant difference between the groups after 6 weeks of healing (P > .05). CONCLUSION: The histomorphometric evaluation of implant surface revealed that: 1. After 3 weeks early healing period, bone to implant contact (BIC) percentage of calcium phosphate coated implants (70.8%) was much greater than that of surface untreated machined implants (44.1%) with P = 0.0264. 2. After 6 weeks healing period, however, BIC percentage of calcium phosphate coated implants group (79.0%) was similar to the machined only implant group (78.6%). There was no statistical difference between two groups (P = 0.8074). 3. We found the significant deference between the control group and experimental group during the early healing period of 3 weeks. But no statistical difference was found between two groups during the later of 6 weeks.