Biological Identification of Skulls in Indonesian and Thai Populations: Ancestry Estimation, Sex Determination, Stature Estimation, and Age Estimation / Identificación Biológica de Cráneos en Poblaciones de Indonesia y Tailandia: Estimación de Ascendencia, Determinación del Sexo, Estimación de Estatura y Estimación de Edad

SUMMARY: This review article will present an overview of biological profiles in forensic utilities. The biological profile of the skull in the existing literature can help to identify humans, especially if the condition of the victim found is a result of mutilation or a bomb explosion. When it comes to the precision of identifying skeletal remains, the human skull is frequently cited as being first in the estimation of age and ancestry and second in terms of sex and stature. It can be an alternative to assessing the following biological parameters: sex, age, stature, and ancestry. The implementation of biological profiles in the identification process is very important considering that some cases require the assistance of forensic anthropology. This review article shows the importance of the value of skulls. The method that can be applied is craniometry which can be used to determine sex, age, stature, and estimated ancestry. Different results will occur depending on the completeness of the skull. Therefore, estimation formulas have different accurate results. Discriminant function analysis has been performed on various measurement sets and its discriminant power has been validated by many researchers. Geometric morphometric analysis has become the main tool for shape analysis and many attempts have been made to use it in analyzing skulls. Several methods supported by technology have also been developed. It is hoped that the review article will show significant differences in results between studies in Thailand and Indonesia, even though they are in the same racial group.

Este artículo presenta una descripción general de los perfiles biológicos en las utilidades forenses. El perfil biológico del cráneo en la literatura existente puede ayudar a identificar a los humanos, especialmente si la condición en la que se encuentra la víctima es el resultado de una mutilación o la explosión de una bomba. Cuando se trata de la precisión en la identificación de restos óseos, el cráneo humano se cita con frecuencia como el primero en la estimación de edad y ascendencia y el segundo en términos de sexo y estatura. Puede ser una alternativa para evaluar los siguientes parámetros biológicos: sexo, edad, estatura y ascendencia. La implementación de perfiles biológicos en el proceso de identificación es importante considerando que algunos casos requieren la asistencia de la antropología forense. Este artículo de revisión muestra la importancia del valor de las cnezas óseas. El método que se puede aplicar es la craneometría para determinar el sexo, la edad, la estatura y la ascendencia estimada. Se pueden obtener diferentes resultados dependiendo de la integridad del cráneo. Por lo tanto, las fórmulas de estimación tienen resultados precisos diferentes. Se ha realizado un análisis de función discriminante en varios conjuntos de medidas y muchos investigadores han validado su poder discriminante. El análisis a través de la morfometría geométrica se ha convertido en la principal herramienta para el análisis de formas y se ha utilizado frecuentemente en el análisis de cráneos. También se han desarrollado varios métodos apoyados en la tecnología. Se espera que este trabajo muestre diferencias significativas en los resultados entre los estudios realizados en Tailandia e Indonesia, aunque pertenezcan al mismo grupo racial.

Two-Dimensional Geometric Morphometric Method on Frontal Sinus for Race Estimation: A Lateral Skull Radiograph Study

@#Introduction: Race estimation of unknown individual is essential in forensic investigation. The resiliency of frontal sinus makes it a potential tool for biological profiling, particularly in cases where fragmented skeleton persists. Geometric morphometrics is an efficient way to characterise shape. However, the use of frontal sinus to identify race of Malaysians is yet to be investigated. This research employed a two-dimensional (2D) geometric morphometric to examine the morphological differences of the frontal sinus among the major races in Malaysia. Methods: Lateral skull radiographs which comprising of 453 adult Malaysian (151 Malays, Chinese and Indian respectively) were used. The 2D landmarks of eight were placed on the digitalized radiographs and 2D geometric morphometric analysis was performed using MorphoJ software. Results: Procrustes ANOVA revealed a significantly different frontal sinus shape (p-value < 0.05) between races. Canonical variate analysis showed significantly different frontal sinus morphology (p-value < 0.05) between Malay and Indian as well as Chinese and Indian. Discriminant function analysis with cross-validation demonstrated a 57.4% accuracy rate. Conclusion: This population-specific study based on frontal sinus of Malaysians using the 2D geometric morphometric, though less reliable, sheds new light on the potential applicability of this method for race estimation purpose.

Sex Determination in the Contemporary Chilean Population by Mandible Analysis in Panoramic Radiographies / Estimación Sexual de la Población Chilena Contemporánea Mediante Análisis de la Mandíbula en Radiografías Panorámicas

SUMMARY: Sex identification of a deceased human individual by means of the mandible is very important for forensic dentistry. The aim of the present study was to determine the sex of Chilean individuals by mandible analysis in panoramic radiographies. Linear and angular parameters of the mandible were analyzed from panoramic radiographies (PR). The study included PR of adult Chilean individuals, of both sexes, with optimum solution and contrast, and which allowed the angles and rami of the mandible to be viewed. Sex was determined by univariate and bivariate discriminant function analysis. The sample consisted of 594 PR of individuals aged between 18 and 84 years. The best sex predictor using univariate discriminant function analysis was the mandibular ramus height (MRH) (74.1 %), followed by the distance from the mental foramen - mandibular base (DMF-MB) (69.1 %) and the bicondylar breadth (BC) (66.7 %). The parameters that presented the lowest sex prediction were the angle of the mandible (AM) with 55.0 % and the distance between mental foramina (DMF) with 53.7 %. The best sex prediction was obtained by the step model of discriminant function analysis (80.2 %), including only three parameters: MRH, BC and DMF-MB. The parameters height of the mandibular ramus, bicondylar breadth and distance from the mental foramen - base of the mandible are good predictors of sex in Chilean individuals when used in conjunction; they are therefore indicated for sex determination in the contemporary Chilean population.

La identificación humana de un individuo fallecido a través de la mandíbula es muy relevante para la odontología forense. El objetivo de este estudio fue estimar el sexo de individuos Chilenos a través del análisis de la mandíbula, utilizando radiografías panorámicas. Fueron analizados parámetros lineales y angulares de la mandíbula, a través de radiografías panorámicas (RP). Se incluyeron RP de individuos chilenos adultos, ambos sexos, con solución y contraste óptimos, y que permitían la visualización de los ángulos y ramas de la mandíbula. Se realizó análisis por función discriminante univariada y bivariada para estimación del sexo. Fueron incluidas 594 RP de individuos entre 18 y 84 años. Para el análisis de función discriminante univariado, la altura de la rama mandibular (ARM) fue el parámetro más predictivo (74,1 %), seguido de la distancia foramen mentoniano - base de la mandíbula (DFM-BM) (69,1 %) y el ancho bicondilar (ABCo) (66,7 %). Los parámetros que presentaron menor predicción sexual fueron el ángulo de la mandíbula (AM) con un 55,0 % y la distancia inter-forámenes mentonianos (DIFM), con el 53.7 %. El análisis por pasos fue el modelo de análisis de función discriminante que presentó la mayor predicción sexual (79,5 %), en el cual fueron incluidos sólo tres parámetros: ARM, ABCo y DFM-BM. Los parámetros altura de la rama de la mandíbula, ancho bicondilar y distancia desde el foramen mentoniano hasta la base de la mandíbula son buenos predictores del sexo en individuos Chilenos cuando utilizados en conjunto y están indicados para estimar el sexo en la población chilena contemporánea.

An integrative literature review of the potential technical challenges in Forensic Odontology practice ­ an exploratory study / Uma revisão integrativa da literatura sobre os potenciais desafios técnicos na prática da Odontologia Forense ­ um estudo exploratório

Forensic Odontology deals with the presentation of dental evidence in a court of law. An academic exploration revealed instances of technical challenges within the field. This study endeavours to delve into the spheres where these challenges occur, with the core objective of enhancing the quality of practice. An integrative literature review was conducted using the online platforms SCOPUS and Web of Science. Based on the selection criteria, 29 pertinent papers dated 2000-2023 were included. Quantitative analysis of the categories of selected articles was performed using Microsoft Excel 2019 (Microsoft Corp., Redmond, WA, USA). Technical concerns were reported in all facets of Forensic Odontology with the general role of expert witnesses being reported the most (n=8; 27.58%). Within the different facets of the field, age estimation was the most prominent area of concern (n=8; 27.58%) and child abuse and neglect (n=1; 3.57%) represented the least reported category. Findings indicate that there is a need to prioritize avenues to enhance the quality of practice in the general role of expert witnesses and the specific area of dental age estimation. To this end, increased support for researchers must be provided to help validate methodologies. It is advisable to institute mandatory formal training and proficiency testing within the field. Inadequate knowledge of dentists regarding child abuse and neglect has been noted, demonstrating the need for more dedicated quality training. Recommendations for Forensic Odontologists have been curated combining this study's results and the codes of ethics of various forensic organisations

A Odontologia Legal trata da apresentação de provas odontológicas em juízo. Uma exploração acadêmica revelou exemplos de desafios técnicos na área. Este estudo procura aprofundar as esferas onde estes desafios ocorrem, com o objetivo central de melhorar a qualidade da prática. Foi realizada uma revisão integrativa da literatura utilizando as plataformas online SCOPUS e Web of Science. Com base nos critérios de seleção, foram incluídos 29 artigos pertinentes datados de 2000-2023. A análise quantitativa das categorias dos artigos selecionados foi realizada no Microsoft Excel 2019 (Microsoft Corp., Redmond, WA, EUA). Preocupações técnicas foram relatadas em todas as áreas da Odontologia Legal, sendo o papel geral dos peritos o mais relatado (n=8; 27,58%). Dentro das diferentes áreas de atuação, a estimativa da idade foi a área de preocupação mais proeminente (n=8; 27,58%), e o abuso infantil e a negligência (n=1; 3,57%) representaram a categoria menos relatada. Os resultados indicam que há uma necessidade de priorizar caminhos para melhorar a qualidade da prática no papel geral dos peritos e na área específica da estimativa da idade dental. Para este efeito, deve ser prestado maior apoio aos investigadores para ajudar a validar metodologias. É aconselhável instituir treinamento formal obrigatório e testes de proficiência na área. Foi observado um conhecimento inadequado dos dentistas sobre abuso e negligência infantil, demonstrando a necessidade de uma formação mais dedicada e de qualidade. As recomendações para Dentistas Forenses foram selecionadas combinando os resultados deste estudo e os códigos de ética de várias organizações forenses.

Comprehensive evaluation of abattoirs with no Hazard Analysis Critical Control Point plan in Tucumán,Argentina / Evaluación integral de frigoríficos sin un plan de análisis de peligros y puntos críticos de control en Tucumán, Argentina

Abstract This work focused on the comprehensive study of two provincial transit abattoirs inTucumán, Argentina, with no Hazard Analysis Critical Control Point (HACCP) plan. Visits (n = 20)were conducted between 2016 and 2018 during the operational and post-operational processes.Risk was estimated and the bacteriological analysis of carcass and environmental samples wasperformed. Risk estimation showed the predominance of high risk in both abattoirs. The maindeviations from the HACCP plan were: deficient building conditions, deficient workflow, lack of sectorization of changing rooms and bathrooms, lack of implementation of Standardized Sanitary Operational Procedures, and no food safety training of workers. The counts of indi-cator microorganisms from both abattoirs were not significant. Salmonella spp. was isolated from 7.5% carcass and 7.3% environmental samples. The Salmonella serovars identified were Cerro, Corvallis, Havana and Agona. Shiga toxin (stx) genes were detected in 24.4% carcass and 30.9% environmental samples. The isolates were characterized as Escherichia coli O8:H7/stx1, O116:H49/stx2 and O136:H40/stx2. Based on these results, it would be possible to implement an improvement plan in Tucumán abattoirs together with the local health authorities. Still, the need to work jointly with the sanitary authority in search of a unique sanitary standard for Argentina remains unaddressed.

Resumen Este trabajo se centró en el estudio integral de dos frigoríficos de tránsito provincial en Tucumán, Argentina, carentes de un plan de análisis de peligros y puntos críticos de control (HACCP, por sus siglas en inglés). Las visitas (n = 20) se realizaron entre 2016 y 2018 durante los procesos operativos y posoperativos. Se realizó la estimación del riesgo y el análisis bacteriológico de medias reses y muestras ambientales. La estimación del riesgo demostró un predominio de riesgo alto en ambos frigoríficos. Las principales desviaciones del plan HACCP fueron las deficientes condiciones edilicias, un inadecuado flujo de trabajo, la falta de sectorización de vestuarios y banños, una implementación nula de procedimientos operativos estandarizados de saneamiento y una insuficiente capacitación en seguridad alimentaria de los operarios. Los recuentos de microorganismos indicadores de ambos frigoríficos no presentaron diferencias significativas. Salmonella spp. se aisló del 7,5% de muestras de medias reses y del 7,3% de muestras ambientales. Se identificaron las siguientes serovariedades de Salmonella: Cerro, Corvallis, Havana y Agona. Se detectaron genes de toxina Shiga (sfx) en el 24,4% de las muestras de medias reses y en el 30,9% de las muestras ambientales. Los aislamientos se caracterizaron como Escherichia coli O8:H7/sfx1, O116:H49/sfx2 y O136:H40/sfx2. Teniendo en cuenta estos resultados, sería posible implementar un plan de mejoramiento en frigoríficos de Tucumán conjuntamente con las autoridades locales de salud. Aun así, sigue sin abordarse la necesidad de trabajar en vinculación con las autoridades sanitarias en la búsqueda de una norma integrada única para Argentina.

Validación de un modelo para la estimación del contenido de agua del suelo mediante espectroscopía en el infrarrojo cercano

El monitoreo del contenido de humedad en el suelo es especialmente importante, ya que proporciona información relevante para tomar decisiones acertadas, en cuanto a riego, fertirriego y manejo del estrés hídrico. Este trabajo tiene como objetivo validar un modelo de estimación del contenido de agua en el suelo, mediante espectroscopía de reflectancia difusa en el rango del infrarrojo cercano. Los suelos evaluados provienen de los municipios de Puerto Gaitán (Meta), Espinal (Tolima) y Mosquera (Cundinamarca). En los dos primeros se establecieron redes rígidas, para seleccionar los puntos de muestreo y empleando dos profundidades en cada caso (0-10 y 10-30; 0-10 y 10-25 cm, respectivamente). Para el tercero, se describieron 77 calicatas y se tomaron muestras a 0-10 y 10-35 cm de profundidad. Posteriormente, se evaluó el contenido de humedad considerando 0, 15 y 30 % de humedad. Los datos obtenidos se analizaron con estadística descriptiva. Se empleó la validación cruzada y externa para cada modelo y se obtuvo un modelo general, a partir de los datos de los tres sitios. Los modelos obtenidos para cada sitio de muestreo y el modelo general tienen buena capacidad predictiva. Según los resultados, se afirma que la espectroscopía de reflectancia difusa NIR es una excelente opción para determinar el contenido de agua en el suelo. De igual manera, a partir del análisis de componentes principales, se identificó una diferenciación entre contenidos de agua de los suelos estudiados.

Monitoring soil moisture content is especially important as it provides relevant information for making informed decisions regarding irrigation, fertigation, and water stress management. This study aims to validate a model for estimating soil water content using diffuse reflectance spectroscopy in the near-infrared range. The evaluated soils come from the municipalities of Puerto Gaitán (Meta), Espinal (Tolima), and Mosquera (Cundinamarca). In the first two municipalities, rigid networks were established to select sampling points, with two depths considered for each case (0-10 and 10-30 cm; 0-10 and 10-25 cm, respectively). For the third municipality, 77 soil pits were described, and samples were taken at depths of 0-10 and 10-35 cm. Subsequently, moisture content was evaluated at 0, 15, and 30 % moisture levels. The obtained data were analyzed using descriptive statistics. Cross-validation and external validation were applied to each model, and a general model was developed based on the data from all three sites. The obtained models for each sampling site and the general model demonstrated good predictive capacity. Based on the results, it is affirmed that near-infrared diffuse reflectance spectroscopy is an excellent option for determining soil water content. Similarly, principal component analysis identified differentiation between water contents of the studied soils.

Limitaciones Técnicas del Método de Conteo de Anulaciones del Cemento para Estimación de Edad. Hallazgos a Partir de Una Revisión con Búsqueda Sistemática / Technical Limitations of Cementum Annulation Count Method for age Estimation. Findings From A Scoping Review

En la última década, la odontología forense se ha enfocado en el desarrollo de metodologías para la estimación de edad (EE) debido a la gran demanda en procesos identificatorios. Entre esas técnicas, el conteo de anulaciones del cemento dental (TCA) ha ofrecido resultados promisorios, pero también contradictorios que han generado dudas sobre su precisión y confiabilidad. El objetivo de este trabajo fue caracterizar, establecer alcances, e identificar las limitaciones del conteo de TCA según los actuales estándares normativos y metodológicos. Se realizó una revisión con búsqueda sistemática del método de conteo de TCA para EE incluyendo estudios experimentales y notas técnicas en las bases PubMed/Medline, Scopus, Web of Science (WoS) y Embase. Se emplearon los términos "estimation", "age" y "cementum", con búsqueda manual complementaria en Google Scholar. Se excluyeron revisiones, estudios en colecciones arqueológicas, estudios radiológicos y cartas al editor. La búsqueda arrojó un total de 273 artículos, seleccionándose 27 que cumplieron con los criterios de inclusión. La mayoría de los estudios fueron publicados en Asia, particularmente en India (n=21). Sólo 6 artículos declararon el número total de individuos, tipos de diente y de cortes histológicos, siendo el premolar el más estudiado. Apenas dos artículos evaluaron la calidad de la muestra a analizar mediante legibilidad de los cortes obtenidos. El test más empleado para evaluar la precisión del método fue el coeficiente de correlación de Pearson (n=21). Estos hallazgos exponen la alta heterogeneidad reportada en las metodologías de EE mediante conteo por TCA, por lo que aún no existe un proceso estandarizado que abarque todas sus etapas y entregue resultados confiables siguiendo los estándares jurídicos actuales para la evidencia científica. Un mayor control de las limitaciones técnicas detectadas aumentará el valor como prueba en un contexto identificatorio legal o forense.

SUMMARY: In the last decade, forensic odontology has focused on the development of age estimation (AE) methodologies due to the great request in identification processes. Among these techniques, the tooth cementum annulation (TCA) count method has offered promising but also contradictory results, raising questions about its accuracy and reliability. The aim of this work was to characterize, establish the scope, and identify the limitations of the TCA count method according to the current normative and methodological standards. A scoping review was carried out for TCA count methods for AE, including experimental studies and technical notes in the PubMed/Medline, Scopus, Web of Science (WoS) and Embase databases. The terms "estimation", "age" and "cementum" were used, with a complementary manual search in Google Scholar. Reviews, studies in archaeological collections, radiological studies and letters to the editor were excluded. The search yielded a total of 273 articles, selecting 27 of them that met the inclusion criteria. Most of the studies were published in Asia, particularly India (n=21). Only 6 articles declared the total number of individuals, types of teeth, and histological sections, with the premolar being the most studied. Only two articles evaluated the quality of the sample to be analyzed through the legibility of the cuts obtained. The most widely used test to assess the precision of the method was the Pearson correlation coefficient (n=21). These findings expose the high heterogeneity reported in EE methodologies by counting TCA, so there is still no standardized process that covers in all its stages and delivers reliable results following current legal standards for scientific evidence. More control of the detected technical limitations will increase the value as evidence in a legal or forensic identification context.

Estimation of Stature Based on Metatarsal Bones in a Thai Population / Estimación de la Estatura Basada en los Huesos Metatarsianos en una Población Tailandesa

SUMMARY: Stature estimation is one of the essential procedures for personal identification in forensic osteology. Therefore, the purposes of this study are to analyze the correlation between length and width of metatarsal measurements and stature, and to develop the regression equations for a Thai population. In this study, the samples were divided into two groups. The first group was called the "training group" for generating stature estimation equations, comprised of 200 skeletons, aged between 19-94 years. The second group was called the "test group" for evaluating the accuracy of generated equations, comprising 40 skeletons. The correlation between metatarsal parameters and stature were moderate to high, and all variables had positive significant correlation with stature. For males, the left ML2 is the length variable that showed the most correlation degree against stature (r=0.702), and the left MSW4 is the width variable that had the most correlation degree against stature (r=0.483). For females, right ML1 is the length variable that had the most correlation degree against stature (r=0.632), and right PW3 is the width stature that had the most correlation degree against stature (r=0.481). For all samples, left ML1 was the length variable that had the most correlation degree against stature (r=0.796) and right PW3 was the width variable that had the most correlation degree against stature (r=0.712). The results of generating multiple regression equations using a stepwise method reveals that the correlation coefficient (R) and standard error of estimate (SEE) were 0.761 and 4.96 cm, respectively, for males, and 0.752 and 4.93 cm for females, with 0.841 and 5.26 cm for all samples, respectively. According to these results, the mean of absolute error from the test group ranged from 3 to 5 cm. Therefore, stature estimation equations using length and width of metatarsals from our study can be applied to estimate stature in the Thai population.

La estimación de la estatura es uno de los procedimientos esenciales para la identificación personal en osteología forense. Por lo tanto, los propósitos de este estudio fueron analizar la correlación entre la longitud y el ancho de las medidas metatarsianas y la estatura, y desarrollar las ecuaciones de regresión para una población tailandesa. Las muestras se dividieron en dos grupos. El primer grupo se denominó "grupo de entrenamiento" para generar ecuaciones de estimación de estatura, compuesto por 200 esqueletos, con edades comprendidas entre los 19 y los 94 años. El segundo grupo se denominó "grupo de prueba" para evaluar la precisión de las ecuaciones generadas, que comprende 40 esqueletos. La correlación entre los parámetros metatarsianos y la estatura fue de moderada a alta, y todas las variables tuvieron una correlación significativa positiva con la estatura. Para el sexo masculino, la variable longitud ML2 izquierda es la que mayor grado de correlación presentó con la estatura (r=0,702), y la izquierda MSW4 fue la variable ancho la que mayor grado de correlación presentó con la estatura (r=0,483). Para el sexo femenino, ML1 derecho fue la variable longitud que tuvo mayor grado de correlación con la estatura (r=0,632), y PW3 derecha fue la variable ancho estatura que tuvo mayor grado de correlación con la estatura (r=0,481). Para todas las muestras, ML1 izquierdo fue la variable longitud que tuvo mayor grado de correlación con la estatura (r=0,796) y PW3 derecha fue la variable ancho que tuvo mayor grado de correlación con la estatura (r=0,712). Los resultados de generar ecuaciones de regresión múltiple usando un método paso a paso revela que el coeficiente de correlación (R) y el error estándar de estimación (SEE) fueron 0,761 y 4,96 cm, respectivamente, para los hombres y 0,752 y 4,93 cm para las mujeres, con 0,841 y 5,26 cm para todas las muestras, respectivamente. De acuerdo con estos resultados, la media del error absoluto del grupo de prueba osciló entre 3 y 5 cm. Por lo tanto, las ecuaciones de estimación de la estatura que utilizan la longitud y el ancho de los metatarsianos de nuestro estudio se pueden aplicar para estimar la estatura en la población tailandesa.

Estimation of dental age using the kvaal method with digital panoramic radiographs in peruvian adults / Estimación de la edad dental según el método de Kvaal con radiografías panorámicas digitales en adultos peruanos

To determine the accuracy of the Kvaal method in the estimation of dental age through the analysis of digital panoramic radiographs of patients between 20 and 47 years of age who attended the stomatological clinic of the Universidad Científica del Sur, (2018 to 2019), Lima-Perú. 289 digital panoramic radiographs belonging to individuals of both sexes, aged 20 to 47 years were analyzed. Length and width measurements were obtained in the dental and pulp chamber in the upper central incisors. These data were subsequently evaluated by calculating the proportions between the pulp and root length of the upper central incisor by applying the formula of the method of Kvaal et al. to obtain the accuracy of the method in estimating dental age. Applying the formula of Kvaal et al. indicates that the relationship between the width of the pulp and the length of the root has a higher level of significance in relation to others proportions: M mean value of all ratios except T (-0.659) and W-L difference between W and L (-0.643). The coefficient of determination (r²) and standard error of estimation (SEE) using the original Kvaal formula is r²: 0.70, SEE: 4.90 years, then a modified Kvaal formula was proposed for the Peruvian population. The Method of Kvaal et al. has an accuracy of 1.24 in estimating the dental age of individuals, using the upper central incisor in digital panoramic radiographs.

Determinar la precisión del método de Kvaal en la estimación de la edad dental mediante el análisis de radiografías panorámicas digitales de pacientes entre 20 a 47 años atendidos en la clínica estomatológica de la Universidad Científica del Sur, (2018 a 2019), Lima-Perú. Se analizaron 289 radiografías panorámicas digitales pertenecientes a individuos de ambos sexos, de 20 a 47 años. Se obtuvo medidas de longitud y anchura en la cámara dental y pulpar en los incisivos centrales superiores. Estos datos se valoraron posteriormente al calcular las proporciones entre la pulpa y longitud de la raíz del incisivo central superior aplicando la fórmula del método de Kvaal et al. para obtener la precisión del método en la estimación de la edad dental. Al aplicar la fórmula de Kvaal et al. indica que la relación entre la anchura de pulpa y la longitud de la raíz presentan un nivel de significancia mayor en relación a otras proporciones: M valor medio de todas las proporciones excepto T (-0.659) y W-L: diferencia entre los valores de W y L (-0.643). El coeficiente de determinación (r²) y el error estándar de la estimación (SEE) utilizando la fórmula original de Kvaal es de r²: 0.70, SEE: 4.90 años, después se propuso una fórmula modificada de Kvaal para la población peruana. El Método de Kvaal et al. tiene una precisión del 1.24 en la estimación de la edad dental de los individuos, utilizando el incisivo central superior en radiografías panorámicas digitales.

Sex estimation based on foramen magnum: a three-dimensional geometric morphometrics approach / Estimación del sexo basado en el foramen magno: un enfoque de morfometría geométrica tridimensional

SUMMARY: The foramen magnum is an important topographic opening which connects cranial cavity and spinal canal. The analysis of the bone material established that there are differences in the shape of the foramen magnum between individuals. The aim of this study was to determine sex based on shape and size of foramen magnum using geometric morphometrics method. A study was performed on three-dimensional models (3D models) of 214 human skulls of known sex and known age (141 male skulls and 73 female skulls). The skulls are located at the museum of Medical Faculty, University of Sarajevo. Skulls belong to Bosnian population from the mid-twentieth century. All examined skulls were scanned with a laser scanner to obtain their 3D models. On 3D models of the examined skulls, four landmarks were marked on foramen magnum. Analysis of sex determination was performed using the MorphoJ program. Results of this study showed that there are sex differences in the shape and size of the foramen magnum. Sex determination based on the shape and size of the foramen magnum was showed 65.25 % accuracy for male and 63.01 % accuracy for female using geometric morphometrics method. Examination of the effect of size of foramen magnum on sexual dimorphism of shape of foramen magnum showed a statistically significant effect. Sex determination based just on the shape of foramen magnum using geometric morphometrics method was possible with 62.41 % accuracy for male and 58.90 % accuracy for female on examined sample. Sex differences on shape and size of foramen magnum were found using geometric morphometrics method on three-dimensional models of the examined skulls. The percentage of accuracy was higher for male based on the shape and size of the foramen magnum than for female.

El foramen magno es una importante abertura topográfica que conecta la cavidad craneal y el canal espinal. El análisis del material óseo estableció que existen diferencias en la forma del foramen magno entre individuos. El objetivo de este estudio fue determinar el sexo en función de la forma y el tamaño del foramen magno utilizando morfometría geométrica. El estudio se realizó en modelos tridimensionales (modelos 3D) de 214 cráneos humanos de sexo y edad conocidos (141 cráneos masculinos y 73 cráneos femeninos). Los cráneos se encuentran en el museo de la Facultad de Medicina de la Universidad de Sarajevo. Los cráneos pertenecen a población bosnia de mediados del siglo XX. Todos los cráneos examinados fueron escaneados con un escáner láser para obtener sus modelos 3D. En los modelos 3D de los cráneos examinados, se marcaron cuatro puntos de referencia en el foramen magno. El análisis de determinación de sexo se realizó utilizando el programa MorphoJ. Los resultados de este estudio mostraron que existen diferencias de sexo en la forma y el tamaño del foramen magno. La determinación del sexo basada en la forma y el tamaño del foramen magno mostró una precisión del 65,25 % para los hombres y del 63,01 % para las mujeres utilizando morfometría geométrica. El examen del efecto del tamaño del foramen magno sobre el dimorfismo sexual de la forma del foramen magno mostró un efecto estadísticamente significativo. La determinación del sexo basada solo en la forma del foramen magno utilizando morfometría geométrica fue posible con una precisión del 62,41 % para los hombres y del 58,90 % para las mujeres en la muestra examinada. Se encontraron diferencias de sexo en la forma y el tamaño del foramen magno utilizando morfometría geométrica en modelos tridimensionales de los cráneos examinados. El porcentaje de precisión fue mayor para los hombres en función de la forma y el tamaño del foramen magno que para las mujeres.

Tiempo empleado para estimar edad dental en niños peruanos comparando el método de Demirjian y el cuadro integral del enfoque de Demirjian: un estudio piloto / Time spent to estimate dental age in peruvian children comparing the demirjian method and the comprehensive chart based on demirjian method: a pilot study

El objetivo de este estudio fue comparar el tiempo empleado al estimar la edad dental (ED) entre el método propuesto por Demirjian et al. y el cuadro integral del enfoque de Demirjian (DAEcc) utilizando radiografías panorámicas digitales de individuos peruanos de 5 a 13 años residentes en Lima. Se realizó un estudio no experimental, comparativo, transversal y retrospectivo. Se utilizaron 100 radiografías panorámicas digitales que presentaban siete dientes permanentes mandibulares izquierdos. Una odontóloga forense capacitada y calibrada determinó el tiempo utilizado en evaluar la maduración dental y la estimación de ED con dos métodos (Demirjian y DAEcc). La unidad de medida utilizada fue los minutos (min.). No hubo diferencias en el tiempo de evaluación del estadio de maduración dental entre ambos métodos (p<0,05). El tiempo para estimar ED fue estadísticamente inferior con DAEcc (2,09 min) que con Demirjian (4,19 min). La diferencia del tiempo total de evaluación resultó estadísticamente significativa entre ambos métodos (Δ2,1 min.; 2,05-2,11; p=0,000). La aplicación del DAEcc redujo en 50 % el tiempo empleado en estimar ED en comparación con los cuadros propuestos por Demirjian. Aunque la odontología forense se centra en el estudio de la eficacia de estimación de la edad, es necesario abordar también su uso práctico.

SUMMARY: The objective of this study was to compare the time used to estimate dental age (DA) between the method proposed by Demirjian et al., and the comprehensive chart for dental age estimation (DAEcc) using digital panoramic radiographs of Peruvian individuals aged 5 to 13 years residing in Lima. A non- experimental, comparative, cross-sectional and retrospective study was carried out. 100 digital panoramic radiographs showing seven mandibular left permanent teeth were used. A trained and calibrated forensic odontologist determined the time used to assess tooth maturation and DA estimation with two methods (Demirjian and DAEcc). The unit of measurement used was minutes (min.). There were no differences in the evaluation time of the dental maturation stage between both methods (p<0.05). The time spent to estimate DA was statistically less with DAEcc (2.09 min) than with Demirjian (4.19 min). The difference in total evaluation time was statistically significant between both methods (Δ2.1 min; 2.05-2.11; p=0.000).The application of DAEcc reduced by 50 % the time spent estimating DA compared to the method proposed by Demirjian. Although forensic odontology focuses on the study of the effectiveness of age estimation, its practical use needs to be addressed as well.

Estimación de brechas de geriatras en Chile / Estimation of geriatrician gaps in Chile

Antecedentes: el envejecimiento de la población chilena y la transición epidemiológica que atraviesa el país, ha incrementado la necesidad de formar, entre otros especialistas, a médicos geriatras. Objetivo: estimar la brecha de geriatras en Chile de acuerdo con necesidades epidemiológicas de la población de 65 años y más. Método: se realizó una estimación de brecha de horas de geriatra para la red de salud, a partir de una consulta a 57 geriatras de laboralmente activos de un total de 156 geriatras registrados a enero del 2021. En dicha consulta se indagó sobre tiempo de duración de consulta y frecuencia de consultas ideales de acuerdo con la capacidad funcional de las personas mayores a nivel nacional y por región obtenida de la encuesta Casen 2017. Resultados: a febrero del 2022 existe un total de 162 geriatras en Chile, cifra que equivale a un geriatra por cada 15.806 personas de 65 años y más. De acuerdo con la estimación realizada, se requeriría en Chile, un total de 1.244.689 horas de geriatra anual, equivalentes a la existencia de 589 geriatras a nivel nacional. Conclusión: según los resultados del estudio, a nivel nacional se necesitarían de un total de 589 geriatras para cubrir las necesidades de atención de las personas mayores con algún nivel de dependencia. De acuerdo con estas cifras, al primer trimestre del 2022 el país presentaría una brecha de 427 geriatras. Ante lo elevada de esta brecha, se cree necesario avanzar en estrategias de formación general en geriatría y gerontología en los equipos de salud y socio-sanitarios.

Background:The ageing between the Chilean population and the epidemiological transition that the country is going through has increased the need to train, among other specialists, geriatric doctors.Objective: To estimate the gap between geriatricians in Chile according to the epidemiological needs of the population aged 65 years and over. Method:An estimate of the gap in geriatrician hours was made for the health network based on a consultation of 57 active geriatricians out of 156 registered as of January 2021. In this consultation, the duration and frequency of ideal consultations were inquired according to the functional capacity of the elderly at the national level and by region obtained from the Casen 2017 survey.Results: as of February 2022, there are 162 geriatricians in Chile, equivalent to one geriatrician for every 15,806 people aged 65 years and over. According to the estimate, a total of 1,244,689 hours of annual geriatrician would be required in Chile, equivalent to 589 geriatricians nationwide. Conclusion:According to the study's results, at the national level, a total of 589 geriatricians would be needed to cover the care needs of older people with some level of dependen-ce. According to these figures, in the first quarter of 2022, the country would present a gap of 427 geriatricians. Given the highness of this gap, it is believed necessary to advance general training strategies in geriatrics and gerontology in health and socio-health teams

A comparison of effectiveness of sex estimation from the calcaneus and talus in a Thai population / Comparación de la efectividad de la estimación del sexo a partir del calcáneo y el talus en una población tailandesa

SUMMARY: Sex estimation is an important aspect of skeletal identification. In addition, previous studies have found that the sex estimation of each race is different. Thus, it is necessary to develop discriminant function equations for the estimation of sex for the Thai population. This study aims to investigate the relationship between width, length and height of the calcaneus and talus with regards to sex and compare the effectiveness of sex estimation between the calcaneus alone, the talus alone, and between both the calcaneus and talus. A total of 200 individuals (100 males and 100 females) were used in this study; ages ranged from 19 to 94 years. Thirteen variables of calcaneus and ten variables of talus were measured. The authors created discriminant function equations for the estimation of sex and tested the efficiency of the equations obtained by using a test group of 40 individuals (20 males and 20 females). By analyzing the mean values of the variables in the calcaneus and the talus, it was shown that males were significantly different from females (p0.05). A stepwise method was used to create 6 equations for sex estimation. The equations were categorized from between the calcaneus alone, the talus alone, and between both the calcaneus and the talus, providing a sex estimation accuracy of between 88.5 and 93.0 %. Using the test group, it was shown that discriminant function equations from the calcaneus alone, the talus alone, and the calcaneus and the talus together, can estimate sex at a high level of accuracy. Sex estimation accuracy was greater than 85 % in all equations. Therefore, the discriminant function equations from the calcaneus alone, the talus alone, and between both the calcaneus and the talus, from this study can be applied to the Thai population.

La estimación del sexo es un aspecto importante de la identificación esquelética. Estudios previos han encontrado que la estimación del sexo de cada raza es diferente. Por lo tanto, es necesario desarrollar ecuaciones de funciones discriminantes para la estimación del sexo de la población tailandesa. Este estudio tuvo como objetivo investigar la relación entre el ancho, el largo y la altura de los huesos calcáneo y talus con respecto al sexo y comparar la efectividad de la estimación del sexo entre el calcáneo solo, el talus solo y entre el calcáneo y el talus. Se utilizaron un total de 200 huesos de individuos adultos (100 hombres y 100 mujeres), cuyas edades oscilaron entre 19 y 94 años. Se midieron trece variables del calcáneo y diez variables del talus. Los autores crearon ecuaciones de funciones discriminantes para la estimación del sexo y probaron la eficiencia de ellas usando un grupo de prueba de huesos de 40 individuos (20 hombres y 20 mujeres). Al analizar los valores medios de las variables en el calcáneo y el talus, se demostró que los huesos de los hombres eran significativamente diferentes al de las mujeres (p0.05). Se utilizó un método paso a paso para crear 6 ecuaciones para la estimación del sexo. Las ecuaciones se clasificaron entre el calcáneo solo, el talus solo y entre el calcáneo y el talus, lo que proporcionó una precisión de estimación del sexo de entre 88,5 y 93,0 %. Usando el grupo de prueba, se demostró que las ecuaciones de funciones discriminantes del calcáneo solo, el talus solo y el calcáneo y el talus juntos pueden estimar el sexo con un alto nivel de precisión. La precisión de la estimación del sexo fue superior al 85 % en todas las ecuaciones. Por lo tanto, las ecuaciones de la función discriminante del calcáneo solo, el talus solo y entre el calcáneo y el talus de este estudio se pueden aplicar a la población tailandesa.

Spatial distribution of Oncomelania hupensis spread in Hubei Province from 2020 to 2022 / 中国血吸虫病防治杂志

Objective To identify the spatial distribution pattern of Oncomelania hupensis spread in Hubei Province, so as to provide insights into precision O. hupensis snail control in the province. Methods Data pertaining to emerging and reemerging snails were collected from Hubei Province from 2020 to 2022 to build a spatial database of O. hupensis snail spread. The spatial clustering of O. hupensis snail spread was identified using global and local spatial autocorrelation analyses, and the hot spots of snail spread were identified using kernel density estimation. In addition, the correlation between environments with snail spread and the distance from the Yangtze River was evaluated using nearest-neighbor analysis and Spearman correlation analysis. Results O. hupensis snail spread mainly occurred along the Yangtze River and Jianghan Plain in Hubei Province from 2020 to 2022, with a total spread area of 4 320.63 hm2, including 1 230.77 hm2 emerging snail habitats and 3 089.87 hm2 reemerging snail habitats. Global spatial autocorrelation analysis showed spatial autocorrelation in the O. hupensis snail spread in Hubei Province in 2020 and 2021, appearing a spatial clustering pattern (Moran’s I = 0.003 593 and 0.060 973, both P values < 0.05), and the mean density of spread snails showed spatial aggregation in Hubei Province in 2020 (Moran’s I = 0.512 856, P < 0.05). Local spatial autocorrelation analysis showed that the high-high clustering areas of spread snails were mainly distributed in 50 settings of 10 counties (districts) in Hubei Province from 2020 to 2022, and the high-high clustering areas of the mean density of spread snails were predominantly found in 219 snail habitats in four counties of Jiangling, Honghu, Yangxin and Gong’an. Kernel density estimation showed that there were high-, secondary high- and medium-density hot spots in snail spread areas in Hubei Province from 2020 to 2022, which were distributed in Jingzhou District, Wuxue District, Honghu County and Huangzhou District, respectively. There were high- and medium-density hot spots in the mean density of spread snails, which were located in Jiangling County, Honghu County and Yangxin County, respectively. In addition, the snail spread areas negatively correlated with the distance from the Yangtze River (r = −0.108 9, P < 0.05). Conclusions There was spatial clustering of O. hupensis snail spread in Hubei Province from 2020 to 2022. The monitoring and control of O. hupensis snails require to be reinforced in the clustering areas, notably in inner embankments to prevent reemerging schistosomiasis.

Estimation model for the exposure of mycophenolic acid in early renal transplant recipients / 中国药房

OBJECTIVE To establish the estimation model for the exposure of mycophenolic acid （MPA） in early renal transplant recipients [calculated by the area under the plasma concentration-time curve with 12 h （AUC0－12 h）]. METHODS Twenty kidney transplant recipients， who received triple immunosuppressive therapy of mycophenolate mofetil （MMF）+tacrolimus+ methylprednisolone， were selected and given MMF dispersible tablets （750 mg， q12 h） on the 15th day after the operation； the blood samples were collected from the patients before and 0.5， 1.0， 1.5， 2.0， 3.0， 4.0， 6.0， 8.0， 12.0 hours after the administration， respectively. The blood concentration of MPA was determined， and the pharmacokinetic parameters of MPA were calculated. The multivariate linear stepwise regression analysis method was used to fit an estimation formula for the finite sampling method suitable for MPA-AUC0－12 h of the recipients. Bland-Altman analysis was used to evaluate the agreement between the estimation formula and the classical pharmacokinetic method. RESULTS The main pharmacokinetic parameters of MPA in 20 renal transplant recipients： c0 was （1.53±0.84） μg/mL， cmax was （12.07±5.97） μg/mL， t1/2 was （5.41±3.67） h， tmax was （1.58±0.75） h， and the average AUC0－12 h calculated by the classical pharmacokinetic method was （33.95±13.40） μg·h/mL. MPA-AUC0－12 h was estimated with sampling points of “4.0， 8.0， 12.0 h”； the simplified calculation formula was AUC0－12 h＝12.058+2.819c4.0+7.045c8.0+ 3.879c12.0 （R 2＝0.934）. The predicted value had a good correlation and consistency with the measured value， and 95.0% of predicted values did not exceed the x±1.96SD （standard deviation） range. CONCLUSIONS The estimation model is established successfully for the exposure of MPA in early renal transplant recipients； the model has better prediction accuracy and fewer sampling points.

An analysis of the investigation results of radionuclide content in food in Chongqing, China / 中国辐射卫生

Objective To investigate the radionuclide content in food in Chongqing, China by conducting a survey on the radioactivity in food. Methods A total of 114 samples of vegetables, grain, milk powder, and tea were collected in Chongqing. The samples were dried, pulverized into powder, added into Marinelli beakers, and then measured for radionuclides using a high-purity germanium gamma spectrometer (GEM40P4-765). Results The mean activity concentrations of natural radionuclides 238U, 232Th, 226Ra, and 40K in food in Chongqing were (0.396 ± 0.510), (0.199 ± 0.296), (0.140 ± 0.209), and (119.250 ± 105.470) Bq/kg, respectively. The contents of radionuclides in different foods were significantly different (P < 0.05). The mean activity concentration of the artificial radionuclide 137Cs was (0.091 ± 0.308) Bq/kg, and the mean activity concentration of 90Sr measured in nine tea samples was (1.243 ± 0.860) Bq/kg. Conclusion The contents of radionuclides in food in Chongqing are lower than the national standard limits, but the safety of radioactivity in food still needs to be taken seriously, and long-term surveillance of radioactivity in food is needed.

Estimation of the number of workers with occupational noise-induced hearing loss from manufacturing industry in China, 2020 / 中国职业医学

{L-End}Objective To estimate the number of workers with occupational noise-induced hearing loss (ONHL) in the manufacturing industry of China in 2020. {L-End}Methods Multiple data sources were integrated to collect information on workers in the manufacturing industry from the Occupational Diseases and Hazards Monitoring Information System under China Disease Prevention and Control Information System. The total number of workers was split based on age from the 2018 Fourth National Economic Census and the 2020 National Survey of Occupational Disease Hazards. Additionally, data on the prevalence of hearing loss in the general population was adjusted based on the age composition of Jilin Province, and noise prevalence was standardized based on the age composition of the employed population in the Seventh National Population Censu. Attribution fractions (AF) was estimated. The prevalence ratio (PR) was calculated by the prevalence of hearing loss in the occupational noise-exposed workers and general population. The proportion and attributable cases (AC) of ONHL cases in all hearing loss cases were estimated for occupational noise-exposed workers. The number of ONHL was estimated based on AF and the total number of workers with hearing loss. {L-End}Results In 2020, a total of 30 059 525 workers were exposed to occupational noise in the manufacturing industry in China, with noise-exposed prevalence and standardized noise-exposed prevalence of 28.94% and 28.52%, respectively. The prevalence of hearing loss among occupational noise-exposed workers increased with age, and a total of 8 054 789 workers suffered from hearing loss. Most of the cases were at the age between 45-<55 years old. The total PR and 95% uncertainty interval (UI) was 2.83 (2.58-3.06) and the total AF and 95%UI was 64.63% (61.22%-67.30%), and both peaks were in the age of 30-<45 years. The AC and 95%UI was 5 205 980 (4 930 620-5 420 345) persons, and most of the cases were at the age between 40-<55 years. {L-End}Conclusion Occupational noise poses a serious threat to the hearing health of workers in the manufacturing industry of China, especially among middle-aged and young adults.

Analyzing the characteristics and influencing factors of high frequency hearing loss among noise-exposed workers in an urban rail transit enterprise / 中国职业医学

{L-End}Objective To analyze the characteristics of hearing loss and the influencing factors of high-frequency hearing loss (HFHL) among noise-exposed workers in an urban rail transit enterprise over five consecutive years. {L-End}Methods A total of 1 268 noise-exposed workers, who exposed to the average noise intensity of <85.0 dB(A), in an urban rail transit enterprise was selected as the research subjects using a judgment sampling method. The pure-tone audiometry results from 2019 to 2023 were collected to analyze the result of hearing loss. The influencing factors of HFHL (average hearing threshold ≥40.0 dB at high frequencies in both ears) were analyzed using the generalized estimating equations (GEE). {L-End}Results The detection rates of threshold elevations at frequencies of 0.5-6.0 kHz increased with increasing frequency from 2019 to 2023 (all P<0.01), with the highest detection rate at 6.0 kHz. The detection rate of speech frequency hearing loss (hearing threshold weighted value≥26.0 dB in the better ear) was 0.1%, 0.0%, 0.4%, 0.2%, and 0.2%, respectively. The detection rate of HFHL from 2019 to 2023 was 2.4%, 2.8%, 2.8%, 2.1%, and 2.8%, respectively. The GEE analysis results showed that the risk of HFHL of the workers in 2022 and 2023 was lower than that in 2019 (all P<0.01), with the odds ratios and 95% confidence intervals ［OR (95%CI)］ of 0.57 (0.41-0.81) and 0.65 (0.48-0.87), respectively. The risk of HFHL was higher among vehicle maintenance worker than train drivers (P<0.05), with OR (95%CI) of 2.37 (1.18-4.77). The risk of HFHL increased with age and length of service among the workers (all P<0.05), with the OR (95%CI) of 2.05 (1.22-3.46) and 1.69 (1.12-2.54), respectively. No interaction was found between type of job and age, type of job and length of service, or age and length of service in the risk of HFHL among the research subjects(all P<0.05). {L-End}Conclusion Noise exposure below the national occupational exposure limits can lead to hearing loss in noise-exposed workers of urban rail transit enterprises, possibly affecting the hearing threshold at 6.0 kHz first. The influencing factors for HFHL in workers of rail transit are age, length of service, and type of job. There is a dose-effect relationship with age and length of service.

Estimation of the effective radiation dose for tunnel construction workers / 中国职业医学

Objective To analyze and set up the effective dose of different ionizing radiation for tunnel construction workers. Methods A total of five tunnels constructed using drilling and blasting methods were selected as the research subjects using the convenient sampling method. The workplace γ radiation effective dose, radon concentrations, and radioactive activity concentrations were detected, and on-site surveys were conducted to estimate the internal and external irradiation doses and total effective doses for workers in different work sites. Results Radiological hazards in tunnels constructed using drilling and blasting methods included radon and its progeny, γ radiation, radioactive dust (uranium-238, radium-226, thorium-232, and potassium-40) and others. The average total effective dose of ionizing radiation exposure for tunnel construction workers was (6.730 1±1.541 1) mSv. The average dose of radon and its progeny was (6.163 0±1.512 8) mSv, radioactive dust was (0.014 6±0.009 1) mSv, γ radiation was (0.552 6±0.138 7) mSv. The dose of radioactive dust of radon and its progeny was 0.24%. Radon and its progeny contributed more to the radioactive dose than radioactive dust and γ radiation (all P<0.05). Among all the radioactive dusts, the dose contribution ranked from highest to lowest was thorium-232, uranium-238, and radium-226. Conclusion For tunnel construction workers, the largest contribution to the effective dose of ionizing radiation exposure is from radon and its progeny for internal irradiation, followed by γ radiation for external irradiation. The contribution of radioactive dust to internal irradiation dose can be considered negligible.