Effects of applying procyanidins on the bond strength of bleached dentin to composite resin / 口腔疾病防治

Objective@#To study the influence of procyanidins on the bonding strength of dentin bleached by carbamide peroxide to composite resin.@*Methods @#By applying different treatments to dentin bonding interfaces, 120 human third molars were randomly divided into 12 groups (n = 10): W group (no bleaching+deionized water), Wa group (no bleaching+deionized water+aging), WT1 group (no bleaching+5% procyanidins for 1 min), WT1a group (no bleaching+5% procyanidins for 1 min+aging), WT2 group (no bleaching+5% procyanidins for 5 min), WT2a group (no bleaching+5% procyanidins for 5 min+aging), C group (carbamide peroxide+deionized water), Ca group (carbamide peroxide+deionized water+aging), CT1 group (carbamide peroxide+5% procyanidins for 1 min), CT1a group (carbamide peroxide+5% procyanidins for 1 min+aging), CT2 group (carbamide peroxide+5% procyanidins for 5 min), and CT2a group (carbamide peroxide+5% procyanidins for 5 min+aging). The bond strength to composite resin was measured by universal mechanical testing machine, microstructure and the nanoleakages were measured by scanning electron microscope immediately or after the thermal cycling aging test.@*Results@#The immediate bond strength of the bleached groups pretreated with procyanidins for 1 min (P<0.001) and 5 min (P<0.001) was higher than that of Group C, and the difference was statistically significant. Meanwhile, there was no statistically significant difference between Group CT1 and Group CT2 (P = 1.000). After the thermal cycles, the bond strength of each group declined. The differences between Group W and Group Wa (P<0.001) and Group C and Group Ca (P<0.001) were statistically significant, but no significant differences between Group CT1 and Group CT1a (P = 0.052) or Group CT2 and Group CT2a (P = 0.053) were found. The main effects of “aging” (P<0.001), “bleaching” (P<0.001) and “procyanidins” (P<0.001) and the second-order interaction effects of “bleaching * procyanidins” (P = 0.008), “bleaching * aging” (P = 0.024), and “aging * procyanidins” (P<0.001) were statistically significant. SEM observations showed that the hybrid layers in Groups C, CT1 and CT2 were not clear, and the hybrid layers in Groups Ca, CT1a and CT2a were partially destroyed and disintegrated. Under backscattering mode, it was observed that there were a large number of silver nitrate particles in the hybrid layer of Group Ca, and the residual silver ions in the hybrid layer of Groups CT1a and CT2a were decreased. @*Conclusion@# Pretreatment with 5% procyanidins for 1 min can improve the immediate bond strength of dentin bleached by carbamide peroxide to composite resin and maintain bonding durability.

Effects of different pretreatment agents on primary tooth dentin bonding durability / 口腔疾病防治

Objective@#To explore the effects of different pretreatment agents on primary tooth dentin bonding durability.@*Methods @#Forty-two retained primary molars were selected, 24 of which were cut along the mesial and distal directions; thus, 48 samples were obtained for shear bond strength tests, and the other 18 teeth were used for nanoleakage tests. According to different pretreatments, both experimental samples were divided randomly into three groups (Group A: distilled water pretreatment group; Group B: 2% chlorhexidine pretreatment group; Group C: 10 mg/mL resveratrol pretreatment group). The test specimens were prepared, the shear bond strength was tested, and interfacial nanoleakage evaluation and scanning electron microscope observation were performed to evaluate the effects of different pretreatment agents on the bonding interface immediately and after aging for one hour with 10% sodium hypochlorite aqueous solution.@*Results @#The immediate shear bond strength results showed that there was no significant difference among the three test groups. After aging, the shear bond strength of Group C was significantly higher than that of Group A and Group B (P<0.05). After aging, the shear bond strength of Group A was significantly lower than the immediate shear bond strength (P<0.05), whereas there was no significant difference in shear bond strength before and after aging in Group B and Group C (P>0.05). For Group C, there was no significant difference in interfacial nanoleakage before and after aging. In addition, among the three groups, Group C had the lowest interfacial nanoleakage (P<0.05).@*Conclusion@# Both chlorhexidine and resveratrol pretreatment can improve the adhesion durability of deciduous dentin, but the effects of resveratrol are better than those of chlorhexidine.

Effect of captopril pretreatment on the dentin bonding durability of self-etch adhesive / 浙江大学学报·医学版

To investigate the effect of captopril on the dentin bonding durability of self-etch adhesive. Different concentrations of captopril ethanol solutions or captopril ethanol/water solutions were prepared to pretreat dentin as primer for the self-etch adhesives. The surface morphology of the dentin was observed with scanning electron microscopy (SEM). Based on the morphology analysis, the pretreatment condition was selected and two self-etch adhesives were employed to evaluate the improvement effect of the captopril pretreatment on the dentin bonding durability. : SEM showed that the pretreatment of captopril ethanol solutions and captopril ethanol/water solutions were able to remove the smear lay and partially expose collagen matrix. According to the SEM results, the pretreating condition of captopril ethanol/water solution with the pretreating time of was selected for further dentin bonding study. For Clearfil SEBOND system, the immediate bonding strength increased from to  (0.05]. For Clearfil S BOND system, there was no significant difference in the immediate bonding strength between the experimental group [(4.07) MPa] and the control group[(4.11) MPa]. But after one-year aging, the bonding strength of the experimental group was higher than that of the control group <0.05]. : The pretreatment with captopril ethanol/water solution increases the dentin bonding strength of the self-etch adhesive systems and also improves the bonding durability.

The bonding durability of resin cements / 대한치과보존학회지

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cements, those were Variolink II, Multilink, Panavia F 2.0, Rely X Unicem. Flat dentin surfaces were created on mid-coronal dentin of extracted third molars. Then fresh dentin surface was grounded with 320-grit silicon carbide abrasive papers to create uniform smear layers. Indirect composite block (Tescera, Bisco Inc., Schaumburg, IL, USA) was fabricated (12 x 12 x 6 mm3). It's surface for bonding to tooth was grounded with silicon carbide abrasive papers from 180- to 600-grit serially, then sandblasted with 20 - 50 microm alumina oxide. According to each manufacturer's instruction, dentin surface was treated and indirect composite block was luted on it using each resin cement. For Rely X Unicem, dentin surface was not treated. The bonded tooth-resin block were stored in distilled water at 37degrees C for 24 hours. After thermocycling, the bonded tooth-resin block was sectioned occluso-gingivally to 1.0 mm thick serial slabs using an Isomet slow-speed saw (Isomet, Buehler Ltd, Lake Bluff, IL, USA). These sectioned slabs were further sectioned to 1.0 x 1.0 mm2 composite-dentin beams. The specimens were tested with universal testing machine (EZ-Test, Shimadzu, Japan) at a crosshead speed of 1.0 mm/min with maximum load of 500 N. The data was analyzed using one-way ANOVA and Duncan's multiple comparison test at p 0.05). 4. Adhesive based-resin cements showed lower bond strength with or without thermocycling than composite based-resin cements. 5. Variolink II & Multilink showed high bond strength and mixed failure, which was occurred with a thin layer of luting resin cement before thermocycling and gradually increased adhesive failure along the dentin surface after thermocycling. The bonding performance of resin cement can be affected by application procedure and chemical composition. Composite based-resin cement showed higher bond strength and durability than adhesive based-resin cement.