El laboratorio de fertilidad masculina, su evolución en los últimos 20 años / The male fertility laboratory, its evolution over the last 20 years / O laboratório de fertilidade masculina, sua evolução ao longo dos últimos 20 anos

Resumen La mayor accesibilidad a los tratamientos de reproducción asistida (RA) y los avances de la criobiología produjeron cambios en los laboratorios de andrología. El objetivo de este trabajo fue analizar la demanda y evolución de las variables seminales en las últimas dos décadas, caracterizar el laboratorio andrológico actual, evaluar el impacto de la incorporación del aseguramiento de la calidad y la inclusión de los sistemas computarizados (CASA). Se utilizaron datos de las medias mensuales del control de calidad interno (n=22 528) y encuestas a profesionales de laboratorios andrológicos (n=65) y a médicos especialistas en fertilidad (n=33). La demanda global se redujo significativamente con el aumento de las solicitudes de primera vez. El volumen y recuento, variables dependientes de andrógenos, disminuyeron con los años. El criterio estricto en morfología disminuyó el porcentaje de normales; la mitad de los médicos encuestados recibieron resultados entre 0 y 10% y el 40% consideró que ponía en riesgo el valor clínico de la variable. El sistema CASA permitió objetivar la cinética espermática e incrementar el porcentaje de progresivos rápidos, pero pocos laboratorios lo incorporaron. El 66% de los médicos resuelven el factor andrológico severo por tratamientos clínicos y el 95% utiliza técnicas de RA. El análisis de semen es ejecutado fundamentalmente por bioquímicos especializados, con baja adhesión a la automatización y acreditación del laboratorio, pero con participación en programas de evaluación externa de calidad. La demanda disminuyó como consecuencia del aumento del tratamiento por RA. La reducción del porcentaje de formas normales compromete su utilidad clínica.

Abstract Increasing availability to assisted reproduction (AR) treatments in Argentina and advances in cryobiology resulted in changes in andrology laboratories. The aim of this study was to evaluate the demand and evolution of seminal variables in the last two decades, characterise the current andrology laboratory, evaluate the impact of the incorporation of quality assurance and the introduction of computer assisted semen analysis (CASA). Data were taken from internal quality control (IQC) monthly means (n=22 528) and professionals in charge of laboratories (n=65) and fertility physicians' (n=33) surveys. Overall demand decreased significantly while first-time orders increased. Sperm volume and sperm count -androgen dependent parameters- decreased over the years. Strict morphology criteria reduced the percentage of normal results; half of the physicians received results between 0 and 10% and 40% considered that it compromised the clinical value of the variable. The CASA system made it possible to objectify sperm kinetic, increasing the percentage of fast progressives, but few laboratories have incorporated it. Sixty-six percent of physicians resolve severe andrological factor by clinical treatments and 95% use AR techniques in those cases. Semen analysis is mainly performed by specialised biochemists, with low adherence to laboratory automatisation and accreditation, but with participation in external quality assessment programmes. The demand decreased because of the increase in AR treatment. The lower percentage of normal forms compromises their clinical utility.

Resumo O aumento do acesso aos tratamentos de reprodução assistida (RA) e os avanços na criobiologia levaram a mudanças nos laboratórios de andrologia. O objetivo deste trabalho foi analisar a demanda e a evolução das variáveis de sêmen nas últimas duas décadas, caracterizar o laboratório de andrologia atual, avaliar o impacto da incorporação da garantia da qualidade e a inclusão dos sistemas computadorizados (CASA). Foram utilizados dados das médias mensais do controle de qualidade interno (n= 22 528) e pesquisas a profissionais de laboratórios andrológicos e a médicos especialistas em fertilidade (n=33). A demanda geral diminuiu significativamente com o aumento das solicitações de primeira vez. O volume e a contagem de esperma, parâmetros dependentes de andrógenos, diminuíram ao longo dos anos. O critério morfológico rigoroso diminuiu a porcentagem de normais; metade dos médicos entrevistados recebeu resultados entre 0 e 10% e 40% considerou que isso comprometía o valor clínico do parâmetro. O sistema CASA, permitiu objetivar a cinética espermática e aumentar o percentual de progressões rápidas, mas poucos laboratórios o incorporaram. 66% dos médicos resolvem o fator andrológico grave por tratamentos clínicos e 95% utilizam técnicas de RA nesses casos. A análise do sêmen é realizada principalmente por bioquímicos especializados, com baixa aderência à automação e acreditação laboratorial, mas com participação em programas de avalação externa de qualidade. A demanda diminuiu como consequência do aumento do tratamento por RA. A diminuição em percentagem de formas normais compromete sua utilidade clínica.

Challenges of computer-assisted orthognathic surgery in clinical application / 口腔疾病防治

@#After years of development, the advantages of computer-assisted orthognathic surgery have been widely recognized. However, the clinical application of this technology is challenging. Each step may generate errors from data acquisition, computer-assisted diagnosis, and computer-assisted surgical design, causing errors to be transferred from the virtual surgical plan to the operation. The accumulation and amplification of errors will affect the final surgical effect. Currently, digital devices, such as intraoral scanners, are being explored for error control, utilizing automation methods and algorithms, and implementing personalized bone positioning methods. Moreover, there are still many problems that have not been fully resolved, such as precise simulation of postoperative soft tissue, functional assessment of mandibular movement, and absorbable internal fixation materials. Fully understanding computer-assisted orthognathic surgery's limitations could provide direction for optimizing existing methods while helping clinicians avoid risks and maximize its advantages to achieve the best outcome. Many emerging and cutting-edge technologies, such as personalized titanium plates, artificial intelligence, and surgical robots, will further promote the development of this discipline. We can expect future optimization of digital orthognathic surgical technology by innovations in automation, intelligence, and personalization.

Effect of the COVID-19 pandemic on cataract surgery by residents who had routine surgical simulator training during residency

ABSTRACT Purpose: To assess the effect of the coronavirus disease 2019 (COVID-19) pandemic on cataract surgery by residents who had mandatory surgical simulator training during residency. Methods: In this retrospective, observational analytical study, the total number of cataract surgeries and surgical complications by all senior residents of 2019 (2019 class; prepandemic) and 2020 (2020 class; affected by the reduced number of elective surgeries due to the COVID-19 pandemic) were collected and compared. All residents had routine mandatory cataract surgery training on a virtual surgical simulator during residency. The total score obtained by these residents on cataract challenges of the surgical simulator was also evaluated. Results: The 2020 and 2019 classes performed 1275 and 2561 cataract surgeries, respectively. This revealed a reduction of 50.2% in the total number of procedures performed by the 2020 class because of the pandemic. The incidence of surgical complications was not statistically different between the two groups (4.2% in the 2019 class and 4.9% in the 2020 class; p=0.314). Both groups also did not differ in their mean scores on the simulator's cataract challenges (p<0.696). Conclusion: Despite the reduction of 50.2% in the total number of cataract surgeries performed by senior residents of 2020 during the COVID-19 pandemic, the incidence of surgical complications did not increase. This suggests that surgical simulator training during residency mitigated the negative effects of the reduced surgical volume during the pandemic.

Digital analysis of unilateral ptosis repair: external levator advancement vs. Müller's muscle conjunctival resection

ABSTRACT Purpose: Evaluation of lid contour and marginal peak point changes to compare outcomes of external levator advancement and Müller's muscle conjunctival resection surgery in unilateral ptosis. Methods: We reviewed the charts of unilateral ptosis patients who underwent external levator advancement or Müller's muscle conjunctival resection. Eyelid contour analysis was conducted on preoperative and 6-month postoperative digital images. This was performed with the multiple margin reflex distances technique, measuring the vertical distance from a line intersecting the center of the pupil to the eyelid margin at 10 positions at 2 mm intervals. The marginal peak point changes were analyzed digitally using the coordinates of the peak point according to the pupil center. Each position's mean distance was compared preoperatively, postoperatively, and with the fellow eyelid. Results: Sixteen patients underwent external levator advancement and 16 patients had Müller's muscle conjunctival resection. The mean margin reflex distance was improved by both techniques (1.46 vs. 2.43 mm and 1.12 vs. 2.25 mm, p=0.008 and p=0.0001 respectively) and approached that of the fellow eyelid (2.43 vs. 2.88 and 2.25 vs. 2.58 mm, p=0.23 and p=0.19, respectively). However, statistically significant lid margin elevation was limited to between the N6 and T6 points in the external levator advancement group. Whereas, significant elevation was achieved along the whole lid margin in the Müller's muscle conjunctival resection group. The marginal peak point was shifted slightly laterally in the external levator advancement group (p=0.11). Conclusions: Both techniques provide effective lid elevation, however, the external levator advancement's effect lessens toward the canthi while Müller's muscle conjunctival resection provides more uniform elevation across the lid margin. The margin reflex distance alone is not sufficient to reflect contour changes.

Performance analysis of pretrained convolutional neural network models for ophthalmological disease classification / Análise de desempenho de modelos de rede neural convolucional pré-treinados para classificação de doenças oftalmológicas

ABSTRACT Purpose: This study aimed to evaluate the classification performance of pretrained convolutional neural network models or architectures using fundus image dataset containing eight disease labels. Methods: A publicly available ocular disease intelligent recognition database has been used for the diagnosis of eight diseases. This ocular disease intelligent recognition database has a total of 10,000 fundus images from both eyes of 5,000 patients for the following eight diseases: healthy, diabetic retinopathy, glaucoma, cataract, age-related macular degeneration, hypertension, myopia, and others. Ocular disease classification performances were investigated by constructing three pretrained convolutional neural network architectures including VGG16, Inceptionv3, and ResNet50 models with adaptive moment optimizer. These models were implemented in Google Colab, which made the task straight-forward without spending hours installing the environment and supporting libraries. To evaluate the effectiveness of the models, the dataset was divided into 70%, 10%, and 20% for training, validation, and testing, respectively. For each classification, the training images were augmented to 10,000 fundus images. Results: ResNet50 achieved an accuracy of 97.1%; sensitivity, 78.5%; specificity, 98.5%; and precision, 79.7%, and had the best area under the curve and final score to classify cataract (area under the curve = 0.964, final score = 0.903). By contrast, VGG16 achieved an accuracy of 96.2%; sensitivity, 56.9%; specificity, 99.2%; precision, 84.1%; area under the curve, 0.949; and final score, 0.857. Conclusions: These results demonstrate the ability of the pretrained convolutional neural network architectures to identify ophthalmological diseases from fundus images. ResNet50 can be a good architecture to solve problems in disease detection and classification of glaucoma, cataract, hypertension, and myopia; Inceptionv3 for age-related macular degeneration, and other disease; and VGG16 for normal and diabetic retinopathy.

RESUMO Objetivo: Avaliar o desempenho de classificação de modelos ou arquiteturas de rede neural convolucional pré--treinadas usando um conjunto de dados de imagem de fundo de olho contendo oito rótulos de doenças diferentes. Métodos: Neste artigo, o conjunto de dados de reconhecimento inteligente de doenças oculares publicamente disponível foi usado para o diagnóstico de oito rótulos de doenças diferentes. O banco de dados de reconhecimento inteligente de doenças oculares tem um total de 10.000 imagens de fundo de olho de ambos os olhos de 5.000 pacientes para oito categorias que contêm rótulos saudáveis, retinopatia diabética, glaucoma, catarata, degeneração macular relacionada à idade, hipertensão, miopia, outros. Investigamos o desempenho da classificação de doenças oculares construindo três arquiteturas de rede neural convolucional pré-treinadas diferentes, incluindo os modelos VGG16, Inceptionv3 e ResNet50 com otimizador de Momento Adaptativo. Esses modelos foram implementados no Google Colab o que facilitou a tarefa sem gastar horas instalando o ambiente e suportando bibliotecas. Para avaliar a eficácia dos modelos, o conjunto de dados é dividido em 70% para treinamento, 10% para validação e os 20% restantes utilizados para teste. As imagens de treinamento foram expandidas para 10.000 imagens de fundo de olho para cada tal. Resultados: Observou-se que o modelo ResNet50 alcançou acurácia de 97,1%, sensibilidade de 78,5%, especificidade de 98,5% e precisão de 79,7% e teve a melhor área sob a curva e pontuação final para classificar a categoria da catarata (área sob a curva=0,964, final=0,903). Em contraste, o modelo VGG16 alcançou uma precisão de 96,2%, sensibilidade de 56,9%, especificidade de 99,2% e precisão de 84,1%, área sob a curva 0,949 e pontuação final de 0,857. Conclusão: Esses resultados demonstram a capacidade das arquiteturas de rede neural convolucional pré-treinadas em identificar doenças oftalmológicas a partir de imagens de fundo de olho. ResNet50 pode ser uma boa solução para resolver problemas na detecção e classificação de doenças como glaucoma, catarata, hipertensão e miopia; Inceptionv3 para degeneração macular relacionada à idade e outras doenças; e VGG16 para retinopatia normal e diabética.

Development of a convolutional neural network for diagnosing osteoarthritis, trained with knee radiographs from the ELSA-Brasil Musculoskeletal / Desenvolvimento de rede neural convolucional para o diagnóstico radiográfico de osteoartrite dos joelhos no ELSA-Brasil Musculoesquelético

Abstract Objective: To develop a convolutional neural network (CNN) model, trained with the Brazilian "Estudo Longitudinal de Saúde do Adulto Musculoesquelético" (ELSA-Brasil MSK, Longitudinal Study of Adult Health, Musculoskeletal) baseline radiographic examinations, for the automated classification of knee osteoarthritis. Materials and Methods: This was a cross-sectional study carried out with 5,660 baseline posteroanterior knee radiographs from the ELSA-Brasil MSK database (5,660 baseline posteroanterior knee radiographs). The examinations were interpreted by a radiologist with specific training, and the calibration was as established previously. Results: The CNN presented an area under the receiver operating characteristic curve of 0.866 (95% CI: 0.842-0.882). The model can be optimized to achieve, not simultaneously, maximum values of 0.907 for accuracy, 0.938 for sensitivity, and 0.994 for specificity. Conclusion: The proposed CNN can be used as a screening tool, reducing the total number of examinations evaluated by the radiologists of the study, and as a double-reading tool, contributing to the reduction of possible interpretation errors.

Resumo Objetivo: Desenvolver um modelo computacional - rede neural convolucional (RNC) - treinado com radiografias da linha de base do Estudo Longitudinal de Saúde do Adulto Musculoesquelético (ELSA-Brasil Musculoesquelético), para a classificação automática de osteoartrite dos joelhos. Materiais e Métodos: Trata-se de um estudo transversal abrangendo todos os exames da linha de base do ELSA-Brasil Musculoesquelético (5.660 radiografias dos joelhos em incidência posteroanterior). Os exames foram interpretados por médico radiologista com treinamento específico e calibração previamente publicada. Resultados: A RNC desenvolvida apresentou área sob a curva característica de operação do receptor de 0,866 (IC 95%: 0,842-0,882). O modelo pode ser calibrado para alcançar, não simultaneamente, valores máximos de 0,907 para acurácia, 0,938 para sensibilidade e 0,994 para especificidade. Conclusão: A RNC desenvolvida pode ser utilizada como ferramenta de triagem, reduzindo o número total de exames avaliados pelos radiologistas do estudo, e/ou como ferramenta de segunda leitura, contribuindo com a redução de possíveis erros de interpretação.

Cirugía virtual guiada para rehabilitación implantosoportada de maxilar edéntulo con carga inmediata / Virtual guided surgery for implantsupported rehabilitation of the edentulous maxilla with immediate loading

Objetivo: Presentar el relato de un caso clínico de cirugía virtual guiada para rehabilitación implantosoportada de maxilar edéntulo con carga inmediata. Relato del caso: Paciente, edéntulo total en ambos maxilares, expresó su deseo de cambiar la prótesis total superior removible por una prótesis total fija sobre implantes. Durante la evaluación clínica, se observaron condiciones biológicas favorables al tratamiento como, adecuada faja de tejido queratinizado y leve reabsorción ósea. Como tratamiento se le sugiere al paciente, una planificación inversa, asistida por cirugía virtual guiada, utilizando un prototipo de guía quirúrgica para la colocación de seis implantes dentales en el maxilar y la instalación de una prótesis protocolo de carga inmediata. Conclusiones: Los resultados nos permiten concluir que la cirugía virtual guiada por computadora para rehabilitación protésica implantosoportada de maxilar edéntulo, con carga inmediata, proporciona precisión en los procedimientos quirúrgicos, es fundamental para la confección de prótesis inmediatas, representa una alternativa mínimamente invasiva y el resultado complace a los pacientes.

Objective: present the report of a clinical case of a virtual guided surgery for implant-supported rehabilitation of the edentulous maxilla with immediate loading. Case report: Patient, bi-maxillary edentulous expressed the desire to replace the removable upper total prothesis for a total fixed prothesis on implants. During the clinical evaluation, favorable biological conditions for treatment were observed, such as adequate keratinized tissue band and mild bone resorption. As part of the treatment, the patient was recommended a reverse planning approach, assisted by virtual guided surgery. This involved a prototype surgical guide for the fixation of six dental implants in the maxilla and the installation of an immediate loading protocol prosthesis. Conclusions: The results lead us to conclude that computer-guided virtual surgery for implant-supported prosthetic rehabilitation of the edentulous maxilla with immediate loading, provides a high precision in surgical procedures. It is essential to fabrication of immediate prostheses, represents a minimally invasive alternative, and results in patient satisfaction.

Transition to online teaching during COVID-19 pandemic: Perspective of higher education teachers from India

Objectives: This cross-sectional, anonymous and questionnaire-based study was undertaken to analyse online teaching experiences during COVID-19 lockdown in higher education from teachers’ perspectives. This was thought to help in improving long-distance education. Materials and Methods: An online survey was conducted to collect both quantitative and qualitative data from higher education teachers. Results: Benefits identified by online teachers indicate that distance education can cater to a large group and helps the students to access educational resources. Major challenges faced were internet connectivity (78.80%), increased workloads (68.80%) and lack of personal communication with students (84%). They believed that the online mode of teaching is the only alternative for students in such an extraordinary situation. It can be valuable for additional discussions but cannot replace traditional offline teaching. Conclusion: Suggestions pointed toward providing internet facilities and electronic databases to students and the necessity of faculty development programmes.

Protocolo Abreviado Guiado Digital: Técnicas de Marcadores Tisulares, Silicona de Registro y CBCT con Sonrisa / Digitally Guided Abbreviated Protocol: Tissue Marker Techniques, Recording Silicone and CBCT with Smile

Establecer un protocolo de cirugía guiada estática con técnicas referenciales para ser realizado de manera predecible, repetible y simple, en todos los tipos de casos. El protocolo abreviado guiado digital para cirugía guiada estática para implantes se centra en diseñar computacionalmente una guía quirúrgica que se apoye en el tejido remanente del paciente, siendo un protocolo digital versátil para la cirugía y rehabilitación implanto protésica, basada en registros clínicos, principalmente la línea de la sonrisa y la captación de ésta en tomografía de haz cónico (CBCT), además de establecer dimensión vertical oclusal (DVO). Logrando así, planificación de implantes hasta la inserción inmediata de la prótesis temporal. Se ejemplifica el trabajo con 2 casos clínicos. Se establece un protocolo con la intención de que pueda ser realizado en pacientes desdentados parciales (Técnica de Registro Silicona) o totales (Técnica de Marcadores Tisulares en prótesis), definiendo un flujo de trabajo tridimensional, digital y optimizado, con un consecuente ahorro de tiempo clínico. Como principio del protocolo de cirugía guiada es lograr el objetivo quirúrgico - protésico deseado con alta precisión. La cirugía y rehabilitación de implantes de manera convencional es altamente dependiente del operador por lo que la alternativa de cirugía guiada de manera estática es una herramienta más para mejorar el pronóstico del paciente. Se establece un protocolo digital simple y efectivo, de cirugía guiada, para la rehabilitación implanto protésica basada en la línea de la sonrisa, tomografía de haz cónico (CBCT), dimensión vertical oclusal (DVO). Protocolo predecible y que optimiza los tiempos clínicos, logrando una rehabilitación protésica inmediata acorde e individualizada para cada paciente.

Establish a static guided surgery protocol with referential techniques to be performed in a predictable, repeatable and simple way, in all types of cases. The abbreviated digital guided protocol for static guided surgery for implants focuses on computationally designing a surgical guide that rests on the patient's remaining tissue, being a versatile digital protocol for prosthetic implant surgery and rehabilitation, based on clinical records, mainly the line of the smile and its uptake in cone beam tomography (CBCT), in addition to establishing occlusal vertical dimension (OVD). Thus achieving implant planning until the immediate insertion of the temporary prosthesis. The work is exemplified with 2 clinical cases. A protocol is established with the intention that it can be carried out in partially edentulous patients (Silicone Registration Technique) or total (Tissue Marker Technique in prostheses), defining a three-dimensional, digital and optimized workflow, with a consequent saving of time. clinical. As a principle of the guided surgery protocol, it is to achieve the desired surgical-prosthetic objective with high precision. Conventional implant surgery and rehabilitation is highly dependent on the operator, so the alternative of statically guided surgery is one more tool to improve the patient's prognosis. A simple and effective digital protocol for guided surgery is established for prosthetic implant rehabilitation based on the smile line, cone beam tomography (CBCT), and occlusal vertical dimension (OVD). Predictable protocol that optimizes clinical times, achieving an immediate and individualized prosthetic rehabilitation for each patient.

Validation of automated image co-registration integrated into in-house software for voxel-based internal dosimetry on single-photon emission computed tomography images / Validação do corregistro automático de imagem integrado a software de análise de dosimetria interna baseada em voxel para tomografia computadorizada de emissão de fóton único

Abstract Objective: To develop an automated co-registration system and test its performance, with and without a fiducial marker, on single-photon emission computed tomography (SPECT) images. Materials and Methods: Three SPECT/CT scans were acquired for each rotation of a Jaszczak phantom (to 0°, 5°, and 10° in relation to the bed axis), with and without a fiducial marker. Two rigid co-registration software packages-SPM12 and NMDose-coreg-were employed, and the percent root mean square error (%RMSE) was calculated in order to assess the quality of the co-registrations. Uniformity, contrast, and resolution were measured before and after co-registration. The NMDose-coreg software was employed to calculate the renal doses in 12 patients treated with 177Lu-DOTATATE, and we compared those with the values obtained with the Organ Level INternal Dose Assessment for EXponential Modeling (OLINDA/EXM) software. Results: The use of a fiducial marker had no significant effect on the quality of co-registration on SPECT images, as measured by %RMSE (p = 0.40). After co-registration, uniformity, contrast, and resolution did not differ between the images acquired with fiducial markers and those acquired without. Preliminary clinical application showed mean total processing times of 9 ± 3 min/patient for NMDose-coreg and 64 ± 10 min/patient for OLINDA/EXM, with a strong correlation between the two, despite the lower renal doses obtained with NMDose-coreg. Conclusion: The use of NMDose-coreg allows fast co-registration of SPECT images, with no loss of uniformity, contrast, or resolution. The use of a fiducial marker does not appear to increase the accuracy of co-registration on phantoms.

Resumo Objetivo: Desenvolver corregistro automático e testar seu desempenho com ou sem marcador fiducial em imagens de tomografia computadorizada de emissão de fóton único (SPECT). Materiais e Métodos: Três SPECT/CTs foram adquiridas para cada rotação de um simulador de Jaszczak em relação ao eixo da maca (0°, 5° e 10°), com e sem fiducial. Dois métodos de corregistro inelástico foram aplicados - SPM12 e NMDose-coreg -, e a porcentagem do erro quadrático médio (%RMSE) foi usada para analisar a qualidade do corregistro. Uniformidade, contraste e resolução foram medidos antes e após o corregistro. NMDose com corregistro automático foi usado para calcular a dose renal de 12 pacientes tratados com 177Lu-DOTATATE e comparado com OLINDA/EXM. Resultados: A marcação fiducial não modificou a qualidade do corregistro das imagens SPECT, medida pela %RMSE (p = 0,40). Não houve impacto na uniformidade, contraste e resolução após o corregistro de imagens adquiridas com ou sem fiduciais. Aplicação clínica preliminar mostrou tempo total de processamento de 9 ± 3 min/paciente para NMDose e 64 ± 10 min/paciente para OLINDA/EXM, com alta correlação entre ambos, apesar de menor dose renal em NMDose. Conclusão: NMDose-coreg permite o corregistro rápido de imagens SPECT, sem perda de uniformidade, contraste ou resolução. O uso da marcação fiducial não aumentou a precisão do corregistro em fantomas.

Cirurgia guiada em implantodontia: revisão integrativa / Guided surgery in implantodogy: integrative review

A cirurgia guiada estática se caracteriza por utilizar de um guia cirúrgico que tem como objetivo reproduzir a posição virtual ideal do implante, por meio de sítios criados para a inserção de uma série de brocas de acordo com a trajetória pré estabelecida pelo planejamento digital. Realizar uma revisão integrativa da literatura sobre cirurgia guiada estática em implantodontia, demonstrando sua importância, vantagens, desvantagens, limitações e complicações em comparação com técnica convencional. Tratou-se de uma revisão integrativa da literatura de natureza exploratória, realizada durante o período de agosto de 2021 e maio de 2022, a partir das produções científicas indexadas na base eletrônica da PubMed. Um total de 13 estudos foram incluídos após a seleção e suas evidências foram reunidas para esclarecer os objetos propostos. Os estudos demostraram que uma das principais vantagens da técnica guiada estática é a precisão em relação a técnica convencional e melhor pós operatório de dor relatado pelos pacientes. Não se pode confiar totalmente no processo de produção dos guias, devido o fator experiencia está associado, além que o custo e tempo dessa produção são elevados. Como complicação e limitação os estudos citam possibilidades de ocorrer mínimo acesso ao sítio cirúrgico e fratura do guia. A cirurgia guiada é uma excelente alternativa, as vantagens mais citadas são em relação a precisão, redução da dor, no entanto há fatores negativos como custo, a impossibilidade de mudança no transoperatório e possíveis erros de fabricação. Existem ainda limitações como fratura da guia e baixo acesso ao sítio cirúrgico.

Static guided surgery is characterized by using a surgical guide that aims to reproduce the ideal virtual position of the implant, through sites created for the insertion of a series of drills according to the trajectory pre-established by digital planning. Perform an integrative review of the literature on static guided surgery in implantodontia, demonstrating its importance, advantages, disadvantages, limitations and complications compared to conventional technique. This was an integrative review of the exploratory literature, carried out during the period of August 2021 and May 2022, from the scientific productions indexed in pubmed's electronic database. A total of 13 studies were included after selection and their evidence was gathered to clarify the proposed objects. Studies have shown that one of the main advantages of the static guided technique is accuracy in relation to the conventional technique and better postoperative pain reported by patients. One cannot fully trust the production process of the guides, due to the experience factor is associated, and the cost and time of this production are high. As a complication and limitation, studies mention possibilities of minimal access to the surgical site and fracture of the guide. Guided surgery is an excellent alternative, the most cited advantages are in relation to accuracy, pain reduction, however there are negative factors such as cost, the impossibility of change in the transoperative period and possible manufacturing errors. There are also limitations such as fracture of the guide and low access to the surgical site.

Aplicación de la dinámica de sistemas en el análisis de la evolución de la hipoacusia y la evaluación del impacto de estrategias sanitarias

Objetivos: Aplicar la dinámica de sistemas para estimar la evolución de la incidencia y la prevalencia de hipoacusia en personas mayores en países de bajos, medios y altos ingresos, así como el acceso al tratamiento, y evaluar la influencia de la implementación de estrategias sanitarias sobre estos indicadores. Metodología: Los análisis se realizaron mediante simulación con dinámica de sistemas según parámetros globales. Para ello, se desarrolló un diagrama de bucles causal, integrando la incidencia, la prevalencia y el tratamiento de hipoacusia con el nivel de desigualdad, factores de riesgo, uso de dispositivos de ayuda auditiva, fuerza laboral de audiólogos y otorrinolaringólogos según el nivel de ingresos del país. Luego, se construyó un diagrama de flujo para ejecutar las simulaciones durante un período de 100 años. Además, se ejecutaron cuatro simulaciones con estrategias sanitarias (reducción de factores de riesgo, mejora en el uso dispositivos de ayuda auditiva, aumento del número de audiólogos y otorrinolaringólogos) y se estimó el porcentaje de cambio respecto al modelo basal. Resultados: Los países de bajos ingresos mostraron una mayor incidencia y prevalencia de hipoacusia, menor acceso a tratamiento adecuado y una mayor prevalencia de hipoacusia sin tratar o con tratamiento inadecuado. La reducción de factores de riesgo creció en un 15 y 33 % la población con audición normal en los próximos 50 y 100 años, respectivamente. Además, la mejora en el uso de dispositivos de ayuda auditiva logró una reducción del 60 % de la población con tratamientos inadecuados o sin tratamiento, y el aumento de audiólogos y otorrinolaringólogos incrementó un 250 % el acceso a un tratamiento adecuado. Conclusiones: La evolución de la salud auditiva está condicionada por factores económicos, donde los entornos más desfavorecidos muestran peores indicadores. Además, la implementación de estrategias combinadas favorecería la salud auditiva en el futuro.

Objectives: To estimate the evolution of the incidence and prevalence of hearing loss in the elderly in low-, middle- and high-income countries by means of system dynamics simulation according to global parameters and to analyze the influence of the implementation of health strategies. Methodology: A causal loop diagram was developed to relate the incidence, prevalence and treatment of hearing loss to the level of inequality, risk factors (RF), use of hearing aids (HA), audiologist and otolaryngologist (ENT) workforce by country income level. A flow chart was then constructed to run the simulations over a 100-year period. In addition, four simulations were run with health strategies (reduction of RF, improvement in HA use, increase in the number of audiologists and ENT specialists) and the percentage change from the baseline model was estimated. Results: Low-income countries showed a higher incidence and prevalence of hearing loss, less access to adequate treatment, and a higher prevalence of untreated or inadequately treated hearing loss. The reduction of RF increased the population with normal hearing by 15% and 33% over the next 50 and 100 years, respectively. In addition, the improvement in the use of ha achieved a 60% reduction in the population with inadequate or untreated treatment, and the increase in audiologists and ENT specialists improved the access to adequate treatment by 250%. Conclusions: The evolution of hearing health is conditioned by economic factors, where the most disadvantaged environments show worse indicators. In addition, the implementation of combined strategies would favor hearing health in the future. System dynamics is a very useful methodology for health managers because it enables to understand how a disease evolves and define what are the best health interventions considering different scenarios.

Objetivos: Aplicar a dinâmica do sistema para estimar a evolução da incidência e prevalência da perda auditiva em pessoas idosas em países de baixo, médio e alto rendimento, bem como o acesso ao tratamento, e avaliar a influência da implementação de estratégias de saúde sobre estes indicadores. Metodologia: As análises foram conduzidas utilizando simulação da dinâmica do sistema com base em parâmetros globais. Para tal, foi desenvolvido um diagrama do laço causal, integrando a incidência, prevalência e tratamento da perda auditiva com o nível de desigualdade, fatores de risco, utilização de aparelhos auditivos, mão-de-obra de audiologistas e otorrinolaringologistas por nível de rendimento nacional. Foi então construído um fluxograma para executar as simulações ao longo de um período de 100 anos. Além disso, foram realizadas quatro simulações com estratégias de saúde (reduzindo os fatores de risco, melhorando a utilização de aparelhos auditivos, aumentando o número de audiologistas e otorrinolaringologistas) e foi estimada a mudança percentual em relação ao modelo de base. Resultados: Os países de baixos rendimentos mostraram maior incidência e prevalência de perda auditiva, menor acesso a tratamento apropriado e maior prevalência de perda auditiva não tratada ou tratada de forma inadequada. A redução dos fatores de risco aumentou a população com audição normal em 15 e 33% durante os próximos 50 e 100 anos, respectivamente. Além disso, uma melhor utilização de aparelhos auditivos permitiu uma redução de 60% na população mal tratada ou não tratada, e o aumento do número de audiologistas e especialistas em ORL aumentou em 250% o acesso ao tratamento adequado. Conclusões: A evolução da saúde auditiva é condicionada por fatores económicos, com os ambientes mais desfavorecidos a apresentarem indicadores piores. Além disso, a implementação de estratégias combinadas favoreceria a saúde auditiva no futuro.

Medição automática de valva mitral a partir de ecocardiograma utilizando processamento digital de imagens / Automatic measurement of the mitral valve based on echocardiography using digital image processing

Fundamento: A avaliação da área valvar mitral por meio da reconstrução multiplano na ecocardiografia tridimensional é restrita a softwares específicos e à experiência dos ecocardiografistas. Eles precisam selecionar manualmente o frame do vídeo que contenha a área de abertura máxima da valva mitral, dimensão fundamental para a identificação de estenose mitral. Objetivo: Automatizar o processo de determinação da área de abertura máxima da valva mitral, por meio da aplicação de Processamento Digital de Imagens (PDI) em exames de ecocardiograma, desenvolvendo um algoritmo aberto com leitura de vídeo no formato avi. Método: Este estudo piloto observacional transversal foi realizado com vinte e cinco exames diferentes de ecocardiograma, sendo quinze com abertura normal e dez com estenose mitral reumática. Todos os exames foram realizados e disponibilizados por dois especialistas, com autorização do Comitê de Ética em Pesquisa, que utilizaram dois modelos de aparelhos ecocardiográficos: Vivid E95 (GE Healthcare) e Epiq 7 (Philips), com sondas multiplanares transesofágicas. Todos os vídeos em formato avi foram submetidos ao PDI através da técnica de segmentação de imagens. Resultados: As medidas obtidas manualmente por ecocardiografistas experientes e os valores calculados pelo sistema desenvolvido foram comparados utilizando o diagrama de Bland-Altman. Observou-se maior concordância entre valores no intervalo de 0,4 a 2,7 cm². Conclusão: Foi possível determinar automaticamente a área de máxima abertura das valvas mitrais, tanto para os casos advindos da GE quanto da Philips, utilizando apenas um vídeo como dado de entrada. O algoritmo demonstrou economizar tempo nas medições quando comparado com a mensuração habitual. (AU)

Background: The evaluation of mitral valve area through multiplanar reconstruction in 3-dimensional echocardiography is restricted to specific software and to the experience of echocardiographers. They need to manually select the video frame that contains the maximum mitral valve opening area, as this dimension is fundamental to identification of mitral stenosis. Objective: To automate the process of determining the maximum mitral valve opening area, through the application of digital image processing (DIP) in echocardiography tests, developing an open algorithm with video reading in avi format. Method: This cross-sectional observational pilot study was conducted with 25 different echocardiography exams, 15 with normal aperture and 10 with rheumatic mitral stenosis. With the authorization of the Research Ethics Committee, all exams were performed and made available by 2 specialists who used 2 models of echocardiographic devices: Vivid E95 (GE Healthcare) and Epiq 7 (Philips), with multiplanar transesophageal probes. All videos in avi format were submitted to DIP using the image segmentation technique. Results: The measurements obtained manually by experienced echocardiographers and the values calculated by the developed system were compared using a Bland-Altman diagram. There was greater agreement between values in the range from 0.4 to 2.7 cm². Conclusion: It was possible to automatically determine the maximum mitral valve opening area, for cases from both GE and Philips, using only 1 video as input data. The algorithm has been demonstrated to save time on measurements when compared to the usual method. (AU)

Implementation of the online learning management system ‘Moodle’ as a blended approach to online teaching

Objectives: Web-based learning is becoming a newly accepted standard in education, more so with COVID-19 pandemic. To use technology to redesign learning experiences, a blend of synchronous and asynchronous approaches was used wherein the routine lectures through MS Teams (synchronous) were integrated with an online learning management system (LMS), ‘Moodle’ (modular object-oriented dynamic learning environment) based, four-quadrant approach (asynchronous). We aimed to determine the student’s engagement, performance and perception of the new online LMS. Materials and Methods: All 170 students of the 1st year MBBS of batch 2020 were enrolled in the course. A module was developed for teaching ‘Physiology of Vision’ with this blended approach. Along with routine online lectures through Microsoft Teams, supplementary materials in the form of multimedia presentations and additional links to useful websites were provided through online LMS. The online activity of students was recorded and assessments were done. A feedback form was filled out by students at the end of the course. Results: A significant positive correlation of examination scores with individual student’s activity logs and significantly better scores in top Moodle users along with significantly higher marks in Moodle-based modules than in other modules confirmed the value of Moodle in improving student performance. Overall feedback from students was clearly in favour of implementing Moodle as a complementary tool to traditional teaching. Conclusion: Moodle improved the quality of learning. It developed interest and motivation among students and has a positive impact on academic outcomes.

Satisfaction levels of students toward online teaching and assessment in a medical college in North India during COVID-19 related lockdown

Background: Medical colleges had to adopt online teaching methods after the imposition of worldwide lockdown due to COVID related pandemic. It is important to understand satisfaction levels among medical students regarding online teaching, to improve online teaching methods in future. Aim and Objectives: The present study aimed to evaluate the satisfaction levels among medical students with regard to online teaching and assessment program and factors associated with low satisfaction levels. Materials and Methods: An observational cross-sectional survey was conducted on 600 MBBS students. Various online teaching methods were implemented April 2020 onward. This survey was sent to the students in July 2020. Satisfaction levels toward various online teaching and assessments were evaluated using a five point Likert scale. Results: A total of 446 MBBS students responded to our survey. We found 1st year of MBBS curriculum (adjusted odds ratio [AOR] = 2.55, P < 0.05), teachers’ inability to explain theory concepts (AOR = 2.47, P < 0.01), teachers not keeping the class interactive (AOR = 1.81, P < 0.01), student unable to hear the teacher adequately (AOR = 1.77, P < 0.01), student being inattentive in class (AOR = 2.06, P < 0.01), and non-availability of high speed internet connectivity (AOR = 1.85, P < 0.001) to be significantly associated with students not being overall satisfied with online teaching. Conclusion: Online platforms proved to be relevant for teaching theory but usefulness for clinical or practical education was not found to be adequate.

Navigation-assisted valgus stress method can avoid over correction of high tibial osteotomy / 中华骨科杂志

Objective:To explore the role of navigation-assisted valgus stress method in avoiding excessive correction of lower limb mechanical axis after high tibial osteotomy (HTO).Methods:A retrospective study was carried out on osteoarthritis (OA) patients who were treated with HTO for medial compartment pain of knee from January 2020 to March 2022 in the Department of Joint Surgery, Shanghai Changhai Hospital, the First Affiliated Hospital of Naval Medical University. According to the different ways of confirming alignment during operation, they were divided into computer navigation assisted valgus stress HTO group (referred to as navigation group) and traditional rod fluoroscopy HTO group (referred to as traditional group). There were 28 patients in the navigation group, 10 males and 18 females, with age of 54.4±9.1 years (range, 41-73 years) and body mass index of 26.1±3.3 kg/m 2 (range, 19.8-35.2 kg/m 2); There were 30 patients in the traditional group, 13 males and 17 females, aged 56.9±8.5 years (range, 40-70 years), with a body mass index of 25.7±4.0 kg/m 2 (range, 19.2-32.9 kg/m 2). Measuring the mechanical femoral tibial angle (mFTA), joint line convergence angle (JLCA), medial proximal tibial angle (MPTA), Lysholm score and Hospital for Special Surgery (HSS) score before operation and at the last follow-up of the two groups, and conduct statistical analysis. Results:Both groups were followed up. The follow-up time of navigation group and traditional group was 21.3±8.7 months and 22.5±7.6 months, respectively, with no significant difference ( t=0.53, P=0.596). There were significant differences between the two groups in the amount of mechanical axis correction (ΔmFTA) and the amount of bone correction (ΔMPTA) ( t=2.09, P=0.041; t=2.58, P=0.012), while there was no significant difference in ΔJLCA ( t=0.32, P=0.753). In the navigation group, there were 9 cases (32%) of undercorrection, 17 cases (61%) with acceptable alignment, and 2 cases (7%) with over correction, while in the traditional group, there were 5 cases (17%) with under correction, 13 cases (43%) with acceptable alignment, and 12 cases (40%) with over correction. There was significant difference in the distribution rate of alignment between the two groups ( P=0.012), and the rate of overcorrection in the navigation group was significantly lower than that in the control group (7% vs. 40%, P=0.005). The intra group correlation coefficient between the navigation correction mechanical axis and ΔmFTA was 0.787. There was no significant difference in Lysholm score and HSS score between the two groups before and after surgery (all P>0.05), and they were significantly improved after operation (all P<0.05). Conclusion:Navigation-assisted valgus stress method HTO is reliable, which can accurately achieve the target alignment, reduce the incidence of over correction, and obtain good clinical results.

Application of preoperative three-dimensional reconstruction planning in total hip arthroplasty for development dysplasia of the hip secondary to osteoarthritis / 中华骨科杂志

Objective:To investigate the clinical efficacy of preoperative three-dimensional (3D) reconstruction planning in total hip arthroplasty for development dysplasia of the hip secondary to osteoarthritis.Methods:A total of 80 patients with osteoarthritis secondary to Crowe I-III developmental dysplasia of the hip who underwent primary unilateral total hip arthroplasty from October 2019 to March 2021 were retrospectively analyzed, including 18 males and 62 females and the mean age was 55.7±10.4 years (range 41-72 years). Forty patients in the 3D group, the prosthesis type and installation angle were planed on the 3D reconstruction software based on the full-length CT scan data of the lower limbs, and the length difference of the lower limbs and hip offset were calculated. Forty patients in the control group underwent preoperative planning using conventional film measurement, and lower limb length was judged based on the preoperative measurement data and intraoperative comparison of both lower limbs. The difference of postoperative leg length, hip offset, hip function score, operating time, intraoperative blood loss, and incidence of complications were compared between the two groups.Results:All 80 patients completed the surgery successfully and the follow-up time was up to 3 months after operation. The 3D group was better than the control group in operation time (70.9±7.7 min vs. 81.6±13.3 min, t=-4.91, P<0.001), the difference of postoperative lower limb length (2.78±1.31 cm vs. 5.35±2.15 cm, t=-5.74, P<0.001), and hip function score at 1 week after operation (75.67±3.35 vs. 67.35±4.21, t=12.33, P=0.002), with statistically significant differences. In the 3D group, 95% of acetabular prosthesis and 90% of femoral stem components were consistent with the planned model, while the rate were only 75% and 68% in the control group, and the difference was statistically significant (χ 2=7.51, P=0.023; χ 2=14.92, P=0.005). There were no intraoperative complications such as vascular and nerve injury, and no postoperative complications such as dislocation or periprosthetic infection in all 80 patients. Conclusion:3D preoperative planning assisted total hip arthroplasty in the treatment of Crowe I-III developmental dysplasia of the hip secondary to osteoarthritis can improve the accuracy of the operation, and has a good clinical effect on restoring the leg length and hip offset.

Application of digital technology in the reconstruction of orbital fractures: research progress / 中华创伤杂志

Orbital fracture often leads to facial collapse, diplopia, enophthalmos, and even blindness. Traditional surgery relies on the experiences of physicians to achieve fracture reduction and orbital wall reconstruction, but the repair effect is not satisfactory. In recent years, with the development of digital technology, technologies such as computer-assisted surgery, 3D printing, surgical navigation systems, and intraoperative CT imaging have become increasingly widespread in the field of orbital reconstruction. Such techniques can avoid dependence on physicians′ experiences and make it easy for estimating and positioning the implantation sites, which subsequently contributes to better surgery efficiency and precise reconstruction of the orbit, improving aesthetics and visual function of patients. To this end, the authors reviewed the recent progress in application of digital technology for orbital fracture reconstruction, so as to provide reference and theoretical basis for clinical practice.

Open reduction and internal fixation assisted by computer virtual surgery in the treatment of complex proximal humeral fracture / 中华创伤杂志

Objective:To investigate the effect of open reduction and internal fixation assisted by computer virtual surgery in the treatment of complex proximal humeral fracture.Methods:A retrospective case series study was performed on clinical data of 36 patients with complex proximal humeral fracture admitted to Dongfang Hospital Affiliated to Tongji University from January 2018 to June 2020. There were 13 males and 23 females, aged 22-86 years [(56.4±4.8)years]. They were all closed fractures. According to Neer classification, there were 20 patients with three-part fractures and 16 with four-part fractures. Precise pre-surgical designs made by using the digital orthopedic surgery planning system of the E-3D were applied to assist the implementation of precise fracture reduction and internal fixation with the locking plate. The fracture healing was observed. The effect of the real surgery assisted by the virtual surgical designs was assessed by comparing the humeral neck shaft angle and humeral head height measured at the virtual surgery and at day 1 after the real surgery. The humeral neck shaft angle, humeral head height, shoulder range of motion (abduction, external rotation and forward flexion), Constant shoulder function score and visual analogue score (VAS) were recorded at 1 day, 3 months and 12 months after the real surgery. The stability of the medial column was assessed at 1 day after the real surgery. The complications were recorded.Results:All patients were followed up for 12-38 months [(18.5±1.8)months]. The fracture showed bony union in all patients with the union time of 6.6-17.2 weeks [(10.2±1.0)weeks]. The humeral neck shaft angle and humeral head height showed no significant differences measured at the virtual surgery and at 1 day after the real surgery, and were also not significant different at 1 day, 3 months and 12 months after the real surgery (all P>0.05). At 3 months and 12 months after the real surgery, the shoulder abduction [(119.4±11.8)°, (155.3±13.7)°], external rotation [(37.6±6.3)°, (46.8±7.4)°], forward flexion [ (94.8±10.2)°, (126.9±1.6)°] and Constant function score [(66.8±8.4)points, (82.4±9.6)points] were all higher than those at 1 day after the real surgery [(53.8±4.5)°, (21.6±3.3)°, (44.6±7.8)°, (34.3±6.1)points], while the VAS [(4.1±0.5)points, (1.2±0.2)points] was lower than that at 1 day after the real surgery [(8.3±1.4)points] (all P<0.05). The medial column was stable in 34 patients and unstable in 2 at 1 day after the real surgery. Complications included screw cutting out in the articular surface in 1 patient and humeral head necrosis in 1. Conclusion:Treatment of complex proximal humeral fractures with open reduction and internal fixation assisted by computer virtual surgery is conducive to maintaining reduction effect, promoting shoulder joint function, relieving pain and reducing complications.

Diagnostic value of thin-layer three-dimensional reconstruction technology combined with personalized scanning for benign and malignant solid solitary pulmonary nodules / 中国基层医药

Objective:To investigate the diagnostic value of thin-layer three-dimensional reconstruction technology combined with personalized scanning for benign and malignant solid solitary pulmonary nodules.Methods:The clinical data of 140 patients with solid solitary pulmonary nodules admitted to Jiangshan People's Hospital form January 2020 to July 2021 were retrospectively analyzed. These patients consisted of 40 patients with benign solid solitary pulmonary nodules (benign group) and 100 patients with malignant solid solitary pulmonary nodules (malignant group). All patients underwent thin-layer three-dimensional reconstruction combined with personalized scanning. The pulmonary nodule signs achieved by thin-layer three-dimensional reconstruction combined with personalized scanning and the diagnostic performance of the combined technology were compared between benign and malignant groups.Results:The proportions of patients with lung cavity sign, lobular sign, vascular convergence sign, vacuole sign, emphysema distribution sign, split pleura sign, and distal perforating vascular sign in the malignant group were 11.0%, 81.0%, 77.0%, 49.0%, 6.0%, 10.0% and 31.0%, respectively, and they were 42.5%, 62.5%, 55.0%, 27.5%, 20.0%, 32.5%, and 5.0%, respectively in the benign group ( χ2 = 15.80, 5.00, 5.66, 4.55, 4.76, 8.96, 9.33, all P < 0.05). The most sensitive sign was lobular sign, which had the highest efficiency, up to 82.0%, in differentiating benign and malignant pulmonary nodules. Conclusion:Lung cavity sign, lobular sign, vascular convergence sign, vacuole sign, emphysema distribution sign, split pleura sign, and distal perforating vascular sign differ greatly between patients with benign and malignant solid solitary pulmonary nodules. Lobular sign has the highest sensitivity in differentiating benign and malignant solid solitary pulmonary nodules. Thin-layer three-dimensional reconstruction combined with personalized scanning has a diagnostic value for benign and malignant solid solitary pulmonary nodules.