Résumé
Objective: To optimize the flash extraction process of the active ingredients from Lonicera japonica by Box-Behnken design and response surface methodology.Methods: Flash extraction was used.With the concentration of ethanol,solid-liquid ratio and extraction time as the main influencing factors and the overall normalization value of the transfer rates of chorogenic acid and luteoloside as the evaluation index, Box-behnken design was performed to screen out the optimal extraction conditions.The mathematics relationship between the overall normalization value and the independent variables was established by multiple linear regression and binomial fitting, and response surface methodology was used to predict the optimal process conditions.Results: The optimal extraction conditions were determined as follows: the ethathol concentration was 66.92% ,the solid-liquid ratio was 18.82 ,the extraction duration was 1.20 min and extracted only once.Under the above conditions, the extraction rate of chloragenic acid and total luteoloside was 92.87% and 87.55% , respectively.Conclusion: The optimized technology is simple,economic and practical,which can provide new ideas for the rapid extraction and quality control of active ingredients from Lonicera japonica .
Résumé
OBJECTIVE:To optimize the flash extraction technology for Guizhi fuling capsule. METHODS:Using blade speed,liquid-solid ratio,extraction time as investigation factors,using the comprehensive evaluation values consisting of transfer rates of gallic acid,paeoniflorin,benzoic acid,cinnamic acid,benzoyl paeoniflorin,amygdalin as investigation index,single fac-tor test was combined with Box-Behnken design-response surface method to optimize the flash extraction technology for Guizhi ful-ing capsule. Verification test was conducted and compared with conventional decoction extraction method(extracting twice,totally 240 min). RESULTS:The optimal flash extraction technology for Guizhi fuling capsule was using water as extraction solvent with blade speed of 5600 r/min and liquid-solid ratio of 10.5:1,extracting for 60 s. The average comprehensive evaluation value of veri-fication test was 85.40%(n=3),with relative error of 0.15% to the predicted value(85.55%),higher than decoction extraction method(72.65%). CONCLUSIONS:Optimized flash extraction technology for Guizhi fuling capsule is efficient and rapid.
Résumé
Objective:To optimize the flash extraction process of Isatidis Radix by Box-Behnken experimental design. Methods:A flash extraction method was used with the extraction voltage, material-liquid ratio and extraction time as the independent variables. A Hassan’s method was used to calculate the normalized value(OD) of comprehensive evaluation of the dry extract yield and the epi-goitrin extraction rate in order to establish the mathematical relationship between the comprehensive evaluation OD and the independent variables, and the response surface method was used to predict the best process conditions. Results:The optimum process conditions were as follows:voltage of 88 V, material-liquid ratio of 19. 62, and extraction time of 2. 03 min. The rate of dry extract and epigoitrin extraction was 37. 902% and 0. 1887%, respectively. Conclusion:The measured value is close to the predicted one,which indicates the comprehensive flash extraction parameters optimized by Box-Behnken experimental design can be used for the extraction for Isatidis Radix.
Résumé
Objective:To optimize the flash extraction method for polygonatum saponin by orthogonal design. Methods: The ex-traction technology was optimized by L9 (34 ) orthogonal test based on the results of single factor experiments. The optimized conditions were as follows:the material liquid ratio was 1 ∶20, the extraction voltage was 100 V, the extraction time was 40s, and the herbs were extracted 3 times (40 s per time). Results:The ratio of material to liquid had significant effect on the extraction rate,and under the a-bove extraction conditions, the extraction amount of polygonatum saponin reached up to (38. 92 ± 0. 67) mg·g-1 . The order of extrac-tion rate was flash extraction >ultrasonic extraction> ethanol extraction. Conclusion:The flash extraction is beneficial to the extrac-tion of polygonatum saponin.
Résumé
Objective To optimize the extraction technology of perilla seeds oil from the oil cake of perilla seeds (OCPS) by using the contents of active fatty acids as evaluation standard. Methods The fatty acids were extracted from OCPS,the residue of perilla seeds after cold-press, by smashing tissue extraction (STE), the new technology selected through comparing with classical leaching extraction (LE), Soxhlet extraction (SE), ultrasonic extraction (UE), and supercritical-CO2 fluid extraction (SFE). For optimized condition of STE, orthogonal test was designed and completed. The contents of five fatty acids in extracted oil and OCPS were determined by GC. Results The optimized extraction parameters were smashing for 1.5 min under extraction power of 150 W and 1:6 of the material/solvent ratio. The contents of five fatty acids in the oils extracted by five techniques from OCPS and determined by GC were as follows:a-linolenic acid (41.12%-51.81%), linoleic acid (15.38%-16.43%), oleic acid (18.93%-27.28010), stearic acid (2.56%-4.01%), and palmitic acid (7.38%-10.77%). Conclusion The results show that STE is the most efficient technology with the highest yield (LE:0.57%; SE:1.03%; UE:0.61%; SFE:0.8(r; STE:1.17%) and shortest time (LE:720 min; SE:360 min; UE:30 min; SFE:120 min; STE:1.5 min) among five tested extraction technologies. It is fast reported using STE to extract herbal oil enriched with active fatty acids.