Résumé
Objective:To compare the accuracy of the needle tip reaching the target tissue between two subcutaneous injection techniques under ultrasound imaging in order to provide a basis for clinical injection to make a safe and reasonable decision.Methods:This was a parallel controlled non-inferiority comparative study. A total of 68 patients who received subcutaneous injections in the outpatient injection room of Nanjing Drum Tower Hospital Affiliated to Nanjing University from June 2021 to September 2022 were selected as the research subjects, and they were divided intothe A and B group according to the random number table method, there were 34 cases in each group. Group A received pinched skin injections, and group B received taut skin injections. Unify the injection site, injection needle length, and needle insertion angle. The accuracy rate of the needle tip reaching the target tissue, namely the subcutaneous fat layer, was compared between the two groups by ultrasound imaging, and the pain scores and the imaging performance during the injection process were observed.Results:The accuracy of the needle tip reaching the subcutaneous fat layer in the group A was 97.1%(33/34), which compared with the 100.0%(34/34) in the group B, there was no significant difference ( χ2 = 0.53, P>0.05). There was no significant difference about the distribution of pain scores between the two groups ( χ2 = 0.67, P>0.05). There were no significant differences about age, subcutaneous fat thickness and the distance from the needle tip to the myofascial in patients with different pain scores ( F = 1.20, 0.44, H = 0.64, all P>0.05). Conclusions:Under certain conditions, pinching the skin and tightening the skin have the same accuracy and safety when the needle tip reaches the subcutaneous fat layer of the target tissue, and the choice should be made according to the clinical situation. Imaging observations have enlightening significance for the practice of subcutaneous injection.
Résumé
BACKGROUND: Increasing attention has been paid to vascular components of the adipose-derived matrix and adipose-derived stem cells in tissue engineering. Existing methods for separating the vascular components of the adipose-derived matrix mainly include enzymatic and bolus injection, both of which have fatal disadvantages. OBJECTIVE: To search for a method for preparing adipose-derived stromal vascular fractions with high efficiency, safety, and simplicity. METHODS: The group without any treatment was used as the negative control, and the enzymatic hydrolysis method served as the positive control. The enzymatic hydrolysis method, traditional bolus method, modified bolus method, glass beads method and built-in ultrasonic waves method were compared through cell volume, survival rate, cell fragments, cell viability, increment rate and detection of microbial infection. The enzymatic hydrolysis method and the common bolus injection method were commonly used in the separation of vascular component cells of the fat source matrix; the improved bolus method was a method obtained by improving on the basis of the ordinary bolus method; the glass bead method was to use the glass bead to oscillate. The shear force generated was obtained by adding glass beads to the fat granules and shaking at 2 500 r/min for 9 minutes to prepare stromal vascular fraction cells. Using the built-in ultrasonic method, adipose tissue was treated at 25 W for 36 seconds to obtain stromal vascular fraction cells through a cavitation effect. RESULTS AND CONCLUSION: (1) The size of stromal vascular fraction cells isolated by five methods showed no significant difference (P > 0.05). (2)The cell viability was lowest in the negative control group, and highest in the enzymatic hydrolysis group. The cell viability in the enzymatic hydrolysis, glass bead, and built-in ultrasonic wave groups was significantly higher than that in the modified and traditional bolus groups (P < 0.05). (3) The cell survival rate and cell proliferation rate in the enzymatic hydrolysis, glass bead, and built-in ultrasonic wave groups were significantly higher than those in the modified and traditional bolus groups (P < 0.05). (4) The cell fragmentation rate and cell apoptosis rate in the enzymatic hydrolysis, glass bead, and built-in ultrasonic wave groups were significantly lower than those in the modified and traditional bolus groups (P < 0.05). (5) These results indicate that the built-in ultrasonic method and the glass bead method are better in enriching vascular components of the adipose-derived matrix. But glass bead method adds exogenous products, so it increases the risk of pollution. Built-in ultrasonic method inserts the ultrasound probe into the adipose tissue, but as long as the ultrasound probe is thoroughly sterilized, the risk of contamination is minimized. In general, the built-in ultrasonic method and the glass bead method are superior to modified and traditional bolus methods.
Résumé
Phthalate esters (PAEs) are commonly used plasticizers and have caused pollution to the environment due to their widespread use.Therefore, many countries have listed such compounds as a priority list of pollutants, and it is of great significance to establish an accurate analysis method for monitoring the pollution of PAEs in water.A method of solid phase membrane extraction combined with ultrasonic wave desortion-gas chromatography-mass spectrometer for analysis of PAEs in water was established in this study.The extraction and desorb conditions were optimized.In this study, the samples were ultrasonic wave desorbed for 7 min at bath temperature of 40℃ and ultrasonic powder of 50%.The detection limits (S/N>3) of this method were between 0.05 μg/L and 0.26 μg/L, the recoveries in different matrixes were between 76.2% and 112.3%, and the relative standard deviations were below 10%.
Résumé
To discuss the ultrasonic testing intelligent infusion pump tubing bubble method. When the ultrasonic wave goes through the interface of two different media, the reflection occurs, refraction, transmission and other physical phenomena can occur because of a large extent acoustic impedance difference between water and air, which can be used in this physical phenomenon, by monitoring the ultrasonic energy (output voltage) can be obtained if the extent of the presence of bubbles and bubble exists within the infusion tube. By measuring the penetration of ultrasonic energy, we detected air bubbles within the infusion line. Ultrasound can accurately detect air bubbles in the infusion line, which is the main method of detecting air bubbles for infusion pump.
Résumé
Objective To study the effectiveness of alkaline electrolyzed water (AEW)in the cleaning of medical instruments and its corrosive effect on metal. Methods Medical instruments of solid smooth,solid with gear or tube were cleaned with AEW adding ultrasonic washing,cleaning efficacy were compared with conventional method, AEW without pulsing ultrasonic washing and control group,corrosive effect of AEW on metal immersed in AEW was tested. Results Cleaning efficacy of solid smooth,solid with gear or tube instruments were significantly differ-ent among four groups(F= 10.868,14.268,6.146,respectively,all P0.05). AEW had no corrosive effect on stainless steel and copper. Conclusion The cleaning efficacy of AEW on solid smooth,solid with gear instruments is su-perior to conventional cleaning method,and can achieve better effectiveness if ultrasonic cleaning is added.
Résumé
OBJECTIVE: To improve the preparative method of boric acid ear drops.METHODS: Boric acid ear drops were prepared using ultrasonic wave rather than waterbath heating to accelerate the solution of boric acid,and a comparison was conducted between the ultrasonic method and the waterbath heating method.RESULTS: The prepared boric acid ear drops were colorless supernatant liquid,which met the standard stated by the "Stipulations of clinical preparations in Zhejiang Province" in tests,identification and content.By ultrasonic method,the time spent for preparing boric acid ear drops was shorter(29?4.2) min than by waterbath heating method(18?1.4) min.CONCLUSION: The improved preparative method for boric acid ear drops is simple and feasible and the quality of the preparation is stable and controllable.
Résumé
Both pretreatment of lignocellulose and its saccharification process are treated with ultrasonic wave.The morphology,structure and crystal performance of the original and treated lignocellulose sample were characterized by SEM and FTIR.Moreover,the changes of raw materials caused by different pretreatment ways and the affect of saccharification rate brought about by ultrasonic wave were also studied.The result shows that the ultrasonic wave decreases the crystallinity of lignocellulose destroying the intermolecular hydrogen bonding effectively and improves the degradation rate of lignin and the saccharification rate of zymohydrolysis availably.The mechanism of activation of ultrasonic wave in zymohydrolysis process was discussed primarily.
Résumé
The method for ultrasonic detection of air bubble in race track is studied in this paper. A automatic detection system is established, which mainly consists of the ultrasound emitter and receiver, high-speed A/D acquisition card and PC.
Résumé
Objective To prepare low molecular weight Eucheuma striatum sulfated polysaccharides. Methods Eucheuma striatum sulfated polysaccharides were degraded with hydrogen peroxide under the ultrasonic wave. Molecular weight and the content of sulfate radical, 3,6-anhydro-galactose of all sulfated polysaccharides were determined. Results The polysaccharides with molecular weight from 5000 to 40000 were prepared and the content of sulfate radical was above 18.5%. Conclusion This method is fit for preparing low molecular weight and good water-solubility polysaccharides. The post-treatment is simple and the method keeps the sulfated radical perfectly.
Résumé
Objective To prepare ?-elemene solid lipid nanoparticles and investigate their particle size diameter and entrapment efficiency.Methods The ?-elemene solid lipid nanoparticles were prepared by film ultrasonic wave dissolving techniques.And the optimum formula was selected through orthogonal design test according to the entrapment efficiency.Results The optimizing technique was ?-elemene(20 ?L),stearic acid(90 mg),lecithin(90 mg),Tween80(2.5 %,5 mL) and Poloxamer 188(2.5 %,5 mL).Conclusion The technique of preparing ?-elemene by film-ultrasonic wave dissolving technique is feasible.
Résumé
The enzyme,as a biocatalyst,can not be surpassed in speeding up the reactions by other common chemical catalysts under the suitable conditions and can catalyze the reaction mildly,simplify the facilities needed,improve the work conditions,and reduce the production costs,etc.Those are its advantages mentioned above.But while the enzyme is extracted outside the cells,the molecular conformation may be changed with decreasing its bioactivity and stability seriously.As one type of physical energy,(ultrasonic) wave with lower intensity and suitable frequency can make the conformation of enzymatic molecular comformation transform positively and the transforming reactions accelerate so as to facilitate the effective constituents of Chinese materia medica and natural products transforming.
Résumé
AIM: To optimize technique for preparing curcumin solid lipid nanoparticles by film-ultrasonic dispersion. METHODS: The influence of various factors,including the consumption of curcumin,stearic acid,lecithin and tween-80,and their effects on the entrapment efficiency and the ratio of loading drug were investigated.And the optimum formula was selected through uniform design test. RESULTS: Under the condition of 30 mg of curcumin,60 mg of lecithin,117 mg of stearic acid and 10 mL of tween-80(1.0%) curcumin solid lipid nanoparticals had good size distributions.The mean particle size diameter was 58.0 nm and the average entrapment efficiency and the ratio of loading drug approached 95.98% and 15.87%,respectively. CONCLUSION: The technique for preparing curcumin solid lipid nanoparticals N by film ultrasonic method is feasible.
Résumé
This paper introduces the development of B-ultrasonic wave video image acquisition and management system based on Windows of the PC.With the application of VB6.0,the acquisition and dynamic display of B-ultrasonic wave video image are realized.ACCESS taken as the database and its ADO application set up,the system has the functions of query,statistics and report of B-ultrasonic wave video image.