Histopathological reaction over prosthesis surface covered with silicone and polyurethane foam implanted in rats / Reação histopatológica sobre a superfície de próteses cobertas por espuma de silicone e poliuretano implantadas em ratos

PURPOSES: To evaluate whether polyurethane foam leads more intense foreign-body reaction than silicone foam. To compare the vascularization of the capsules surrounding the foam implants. To investigate if the capsule of polyurethane foam implanted has greater amount of collagen than that of silicone foam. METHODS: Sixty-four young male Wistar rats were allocated into two groups: polyurethane foam and silicone foam. Subcutaneous discs were implanted into the dorsum of the animals in both groups. The capsules were assessed 28 days, two months, three months and six months postoperatively. Microscopic analysis with H&E stain was performed to evaluate the acute and chronic inflammatory process, foreign-body reaction and neovascularization. The analysis with picrosirius red was performed using the ImageProPlus software, to measure the number of vessels and collagen types I and III. RESULTS: There were no statistical differences between the two groups regarding the acute and chronic inflammatory processes. All rats from the polyurethane group, in all times, exhibited moderate or intense foreign-body reaction, with statistic significant difference (p=0.046) when compared with the silicone group, in which the reaction was either mild or nonexistent at two months. Vascular proliferation was significantly different between the groups at 28 days (p=0.0002), with the polyurethane group displaying greater neovascularization with H&E stain. Similar results were obtained with picrosirius red, which revealed in the polyurethane group a much greater number of vessels than in the silicone group (p=0.001). The collagen area was larger in the polyurethane group, significantly at 28 days (p=0.001) and at two months (p=0.030). CONCLUSIONS: Polyurethane foam elicited more intense foreign-body reaction when compared with silicone foam. The number of vessels was higher in the capsules of the polyurethane foam implants 28 days after the operation. The capsule of the polyurethane foam implants showed a greater amount of collagen than that of the silicone foam implants.

OBJETIVOS: Avaliar, em relação ao uso de próteses, se a espuma de poliuretano apresenta maior reação de corpo estranho no organismo ao ser comparada com a espuma de silicone. Se há diferenças na vascularização das cápsulas formada ao redor das duas espumas implantadas. Se as cápsulas dos implantes de espuma de poliuretano apresentam quantidade maior de fibras colágenas ao serem comparadas com as da espuma de silicone. MÉTODOS: Utilizou-se 64 ratos albinos da linhagem Wistar, distribuídos em dois grupos de 34, grupo espuma de poliuretano e grupo espuma de silicone e receberam implantes discóides subcutâneos em seu dorso. Foram analisadas as cápsulas peri-implante com 28 dias, dois, três e seis meses após a introdução. A análise microscópica com H&E considerou as variáveis: inflamação aguda, inflamação crônica, reação de corpo estranho e neoformação vascular. A análise da coloração com picrosirius-red usando ImageProPlus considerou o número de vasos e colágeno tipo I e tipo III. RESULTADOS: Em relação à inflamação aguda e crônica, não foram encontradas diferenças estatísticas nos dois grupos. Todos os animais do grupo poliuretano, em todos os momentos, apresentaram reação de corpo estranho moderada ou intensa e foi encontrada diferença estatística significativa (p=0,046) ao serem comparados com o grupo silicone, cuja reação era ausente ou discreta aos dois meses. A neoformação vascular apresentou diferenças significativas nos dois grupos, aos 28 dias (p=0,0002); o grupo poliuretano com H&E apresentava quantidade maior de vasos neoformados e o mesmo ocorrendo com o picrosirius, cujo número de vasos era maior que no grupo silicone (p=0,001). A área de colágeno em todos os momentos foi maior no grupo poliuretano, sendo significativa com 28 dias (p=0,001) e com dois meses (p=0,030). CONCLUSÕES: A espuma de poliuretano apresentou maior reação de corpo estranho no organismo do que a espuma de silicone. A quantidade de vasos foi maior na cápsula da espuma de poliuretano com 28 dias após o implante. Aos 28 dias as cápsulas dos implantes de espuma de poliuretano apresentaram quantidade significativamente maior de colágeno do que as de espuma de silicone.

Novel experimental cements for use on the dentin-pulp complex

This aim of this study was to evaluate the physicochemical and biological properties of novel experimental cements (Hybrid, Paste and Resin) based on synergistic combinations of existing materials, including pH, diametral tensile strength (DTS) and cytotoxicity comparing them with mineral trioxide aggregate (MTA - Angelus®) and a glass ionomer cement (GIC) developed at our laboratory. For the physicochemical and biological tests, specimens with standard dimensions were produced. pH measurements were performed with digital pH meter at the following time intervals: 3, 24, 48 and 72 h. For the DTS test, cylindrical specimens were subjected to compressive load until fracture. The MTT assay was performed for cytotoxicity evaluation. Data were analyzed by ANOVA and Tukey's test (α=0.05). Paste group showed pH values similar to MTA, and Hybrid group presented pH values similar to GIC (p>0.05). The tested materials showed pH values ranging from alkaline to near neutrality at the evaluated times. MTA and GIC showed similar DTS values. The lowest and highest DTS values were seen in the Paste and Resin groups, respectively (p<0.05). Cell viability for MTA and experimental Hybrid, Paste and Resin groups was 49%, 93%, 90% and 86%, respectively, when compared with the control group. The photo-cured experimental resin cement showed similar or superior performance compared with the current commercial or other tested experimental materials.

O objetivo deste estudo foi avaliar propriedades físico-químicas e biológicas de novos cimentos experimentais (Híbrido, Pasta e Resinoso) baseado na combinação sinérgica de materiais existentes, incluindo pH, resistência à tração diametral (RTD) e citotoxidade, comparando-os ao MTA (Angelus®) e a um cimento de ionômero de vidro (CIV) desenvolvido em nosso laboratório. Para a realização dos testes físico-mecânico e biológico, foram confeccionados espécimes com dimensões padrão. O teste de pH foi realizado por meio de pH-metro digital nos tempos: 3, 24, 48 e 72 h. Para o teste de RTD, espécimes cilíndricos foram submetidos a carga compressiva até sua fratura. Para avaliação da citotoxidade, utilizou-se o teste MTT. Os dados foram analisados utilizando ANOVA e teste de Tukey (α=0,05). O grupo Pasta apresentou valores de pH semelhantes ao MTA, assim como o grupo Híbrido seguiu os parâmetros do CIV (p>0,05). Todos os materiais apresentaram valores de pH alcalinos ou próximosà neutralidade nos tempos avaliados. MTA e CIV apresentaram valores de RTD similares. Os menores e maiores valores observados foram do grupo Pasta e Resinoso, respectivamente (p<0,05). A viabilidade celular para os grupos MTA, Híbrido, Pasta, Resinoso, quando comparados ao grupo controle foi de: 49, 93, 90 e 86%, respectivamente. O cimento experimental Resinoso apresentou desempenho similar ou superior aos materiais comerciais e experimentais avaliados.

Cytotoxicity of latex and non-latex orthodontic elastomeric ligatures on L929 mouse fibroblasts

This study investigated the cytotoxicity exists between latex and non-latex Orthodontic elastomeric ligatures. Six elastomeric ligatures (1 latex, 2 latex-free and 3 polyurethane) from different manufacturers were divided into 6 groups of 15 elastics each: A (Latex-free, American Orthodontics), M (Polyurethane, Morelli), G (Polyurethane,GAC International), Te (Polyurethane, Tecnident), TP (Natural latex,TP Orthodontics) and U (Latex-free,3M Unitek). The cytotoxicity assay was performed using cell cultures (L929 mouse fibroblast cell line), which were subjected to the cell viability test with neutral red ("dye-uptake") at 1, 2, 3, 7 and 28 days. Data were analyzed statistically by ANOVA and Tukey's test (α=0.05). No statistically significant differences (p>0.05) were observed between Groups M and Te in all experimental periods, except at 2 days. No significant differences (p>0.05) in cell viability were found either among Groups A, G, TP and U or between Groups M and Te at 24 h or among Groups CC, A, G, TP and U at 2 and 28 days. It may be concluded that latex-free elastomeric ligatures from American Orthodontics and Unitek trademarks induced less cell lysis compared to latex and polyurethane ligatures.

Este estudo investigou a citotoxicidade entre ligaduras elásticas ortodônticas de látex e não-látex. Seis ligaduras elásticas de diferentes fabricantes (1 látex, 2 não-látex e 3 poliuretano) foram divididos em 6 grupos de 15 elásticos cada: Grupo A (látex-free, American Orthodontics), M (Poliuretano, Morelli), G (Poliuretano, GAC International), Te (Poliuretano, Tecnident), TP (látex natural, TP Orthodontics) e U (Látex-free, 3M Unitek). O ensaio de citotoxicidade foi realizado utilizando culturas de células (células da linhagem L929, fibroblastos de camundongo) que foram submetidos ao teste de viabilidade celular com vermelho neutro ("dye-uptake") em 1, 2, 3, 7 e 28 dias. A análise de variância (ANOVA), com comparações múltiplas e teste de Tukey foram empregados (α=0,05). Os resultados mostraram que não houve diferença estatisticamente significante entre os Grupos M e Te em todos os tempos experimentais (p>0,05), exceto em 2 dias. Não houve diferença estatisticamente (p>0,05) entre a viabilidade das células nos grupos A, G, TP e U ou entre os grupos M e Te em 24 h, ou entre os grupos CC, A, G, TP e U em 2 e 28 dias. Concluiu-se que as ligaduras elásticas látex-free das marcas American Orthodontics e Unitek induziram menor quantidade de lise celular comparado às ligaduras de látex ou poliuretano.

Evaluation of the Cytotoxicity of Polyetherurethane (PU) Film Containing Zinc Diethyldithiocarbamate (ZDEC) on Various Cell Lines

A polyetherurethane (PU) film containing 0.1% zinc diethyldithiocarbamate (ZDEC) is the international standard reference material for testing the in vitro cytotoxicity of polymer based biomaterials. Nowadays, culturing L929 or BALB/3T3 cells in direct contact or in an extract dilution condition is the most frequently using method for evaluating the cytotoxicity from biomaterials and medical devices. However, the results often vary, because it is directly related to the cellular functions and the mechanism of the toxicity of the contacting cells. In this study, 13 cell lines originating from various tissues were used to detect the cytotoxic activities of a PU film containing 0.1% ZDEC (PU-ZDEC). The correlation between the reactivity zone size and the relative cytotoxicity by quantifying the released total protein from each cell in the direct contact testing method was investigated. Hepa-1c1c7 cells demonstrated the highest sensitivity in the reactivity zone size, while CHO/dhFr(-) cells were the most sensitive in terms of the relative cytotoxicity. A correlation between the two processes in each cell line was not found (r=-0.478). In the extract dilution method, which involved cultivating the cells in the medium with various ZDEC concentrations prepared by diluting the PU incubation, the cytotoxicity increased with increasing ZDEC concentration in all cell lines. The BALB/ 3T3 cells demonstrated the highest sensitivity in the extract dilution method. No correlation in a comparison of the relative cytotoxicity from the direct contact method with the extract dilution method in each cell line, was found (r=-0.445). In this experiment, Hepa-1c1c7, BALB/3T3, CHO/dhFr(-) and L-929 cells among the 13 types of cell lines were the sensitive cell lines according to the two methods. The preliminary results suggest that a comparison of at least one or more cytotoxicity testing methods and many cell lines is necessary for an in vitro cytotoxicity test of biomaterials.

Avaliaçäo da toxicidade sistêmica da poliuretana derivada de óleo de mamona: resultados preliminares / Evaluation of systemic toxicity of polyurethane derivade castor-oil plant: preliminary results

Seguindo normatizações internacionais (ASTM), a avaliação toxicológica de um material polimérico derivado de óleo de mamona está sendo feita através da injeção sistêmica em camundongos albinos. Posteriormente, será feita a averiguação histopatológica de rins, fígado, baço e pulmões. Os sinais clínicos apresentados pelos animais após a injeção não revelaram aspectos de toxicidade

Abstract - The toxicological evaluation of a polymeric material from castor oil is being carried out by systemic injection in albino mice and by a subsequent histopathological analysis of their kidneys, liver, spleen and lungs. The animais have not developed clinicai signs of toxicity after the injection. Histopathological analysis of their organs were not concluded yet