clinical trial of patient satisfaction with tooth and magnet supported overdenture by visual analogue scale [VAS]

The purpose of this study was to determine the effect of magnet retained overdenture treatment over tooth supported overdenture and degree to which subjective treatment outcome could be predicted by VAS [Visual Analogue Scale]. 10 patients were identified and conventional over denture was delivered, they form group A1. In the same patients magnets were attached to the abutments and the same over denture was converted to magnet retained over denture after 6 months. They form group A2. They finished a questionnaire with 10 statements on overdenture complaint. Visual analogue scale were used to investigate their satisfaction. Difference between the group were analyzed. Magnet retained overdenture was shown to be very effective on compare to tooth supported overdenture

Palateless custom bar supported overdenture: A treatment modality to treat patient with severe gag reflex.

Objective: To suggest a custom bar supported overdenture treatment modality for prosthodontic management of patients with severe gag reflex. Background: Some patients have a severe gag reflex and cannot tolerate conventional maxillary complete dentures with maximum palatal coverage and extensions of all borders. The condition further gets complicated in patients suffering from respiratory problems along with severe gag reflex. Severe gagging acts as a barrier to treat such patients with accepted clinical procedures and prevent patients from wearing the prosthesis. By saving some of the remaining natural teeth and fabricating, a horse shoe shape palateless simple tooth or bar supported overdenture can be successfully used for treating such patients. Materials and Methods: The remaining maxillary right and left canines were prepared with the tapered round end diamond bur to receive copings of custom bar after intentional root canal treatment of same teeth. Impression was made with light body and putty of the polyvinyl siloxane elastomer with double step putty wash technique. Impression was poured with die stone. Wax pattern of copings with bar was fabricated with inlay wax which was invested and casted. After retrieving the bar, it was finished and its fit was evaluated. The coping-bar assembly was finally cemented with the glass ionomer cement. Palateless overdenture was fabricated by conventional technique used for the fabrication of complete denture. Conclusion: Palateless custom bar supported overdenture procedure can be successfully used for the management of patients with severe gag reflex with improved denture retention, stability, chewing efficiency and comfort of the patient.

Effect of retorque on loosening torque of prosthetic screws under two levels of fit of implant-supported dentures

This study evaluated the influence of retorque on loosening torque (Lt) of prosthetic screws in implant-supported dentures with different fit levels. Ten mandibular implant-supported dentures were fabricated and then 20 cast models were then prepared using prosthetic structures to create 2 fit levels: passive fit (Pf) and misfit (Mf). Two tightening techniques were also evaluated: initial torque only (T1); and initial torque and retorque after 10 min (T2). Gold or titanium screws were used, resulting in 4 groups to each one: Pf/T1, Pf/T2, Mf/T1, Mf/T2. The Lt was measured 24 h after the tightening torque using digital torque meter. Data were analyzed statistically by two-way ANOVA and Tukey's test (α=0.05), separately for each screw material. For titanium screws, no significant difference (p>0.05) was found between Pf/T1 and Pf/T2, or between Pf/T2 and Mf/T2. However, statistically significant difference (p<0.05) was found between Pf/T1 and Mf/T1, and between Mf/T1 and Mf/T2. Mf reduced the Lt using T1, while and T2 increased the Lt for Mf. Retorque and fit were shown to have no significant influence on the Lt of the gold screws. Retorque application made insignificant the misfit effect on the Lt of the titanium screws, suggesting that this procedure should be performed routinely during the screw tightening in multi-unit dentures.

Este estudo avaliou a influência do retorque no Ta dos parafusos protéticos em próteses implantossuportadas com diferentes níveis de adaptação. Foram confeccionadas 10 próteses mandibulares implantossuportadas. Vinte modelos de gesso foram fabricados utilizando as estruturas protéticas para criar os 2 níveis de adaptação: adaptação passiva (AP) e desajuste (D). Foram avaliadas 2 técnicas de aperto do parafuso: inicial torque (T1); e inicial torque e retorque após 10 min (T2). Foram usados parafusos de ouro e titânio, resultando em 4 grupos para cada material do parafuso: AP/T1, AP/T2, D/T1, D/T2. O Ta foi mensurado 24 h após o torque de aperto utilizando torquímetro digital. Os resultados foram analisados pela ANOVA (2 fatores) e teste de Tukey (α=0,05), separadamente para cada material dos parafusos. Para os parafusos de titânio, não foi encontrada diferença estatística significante entre AP/T1 e AP/T2, ou AP/T2 e D/T2; porém, diferença significante foi encontrada entre AP/T1 e D/T1, ou D/T1 e D/T2. Onde, D reduziu a Ta utilizando T1; e T2 aumentou o Ta para D. Retorque e adaptação não apresentaram influência significante no Ta dos parafusos de ouro. A aplicação do retorque tornou insignificante o efeito do desajuste no Ta dos parafusos de titânio, sugerindo que este procedimento deveria ser usado rotineiramente durante os parafusos protéticos de titânio em próteses múltiplas.

A comparison of stress distribution and flexion among various designs of bar attachments for implant overdentures: a three dimensional finite element analysis.

CONTEXT: Bar overdentures are popular choices among clinicians worldwide but configurations that provide an optimal biomechanical distribution of stress are still debatable. AIMS: To compare the stresses and elastic flexion between implant supported bar overdentures in various configurations using finite element analysis. SETTINGS AND DESIGN: A CAT scan of a human mandible was used to generate an anatomically accurate mechanical model. MATERIALS AND METHODS: Three models with bars and clips in three different configurations were constructed. Model 1 had a single bar connecting two implants, Model 2 had three bars connecting all the four implants, and Model 3 had two bars connecting the medial and distal implants on the sides only. The models were loaded under static conditions with 100N load distributed at the approximate position of the clip. The mandibular boundary conditions were modeled considering the real geometry of its muscle supporting system. Maximum von Mises stress at the level of the bar and at the bone implant interface were compared in all three models. The flexion of mandible and the bar was also compared qualitatively. STATISTICAL ANALYSIS USED: The analyses were accomplished using the ANSYS software program and were processed by a personal computer. Stress on these models was analyzed after loading conditions. RESULTS: Qualitative comparisons showed that stress at the level of the bar and at the bone implant interface were in the following order: Model 1> Model 3> Model 2. The flexion of the mandible and the bar were in the following order: Model 2 > Model 1 > Model 3. CONCLUSIONS: Four implant bar systems connected by bars on the sides only is a better choice than two implant bar systems and four implant bar systems with bars connecting all four implants.

Intrusion in implant-tooth-supported fixed prosthesis: an in vitro photoelastic stress analysis.

BACKGROUND AND OBJECTIVE: Intrusion of natural teeth is a very common and interesting problem associated with implant-assisted fixed partial prostheses. Various theories have been put forth to explain this phenomenon, most of which revolve around the philosophy of exertion of excessive forces onto the natural tooth in a combination fixed partial denture. This photoelastic study examines the current theories revolving around intrusion and evaluates whether natural tooth intrusion is a definite possibility in an implant-tooth-connected fixed partial prosthesis. MATERIALS AND METHODS: A two-dimensional photoelastic method was employed for testing and analysis. Two sets of photoelastic models were fabricated, one depicting a totally tooth-supported situation and the other an implant-tooth-supported situation. A rigid type and non-rigid type of connection were also incorporated into the fixed partial denture used in the both the situations in the study. Loads were applied on the anterior and posterior abutments and the pontic regions in both sets of models and the fringe patterns were photographically recorded for analysis. RESULTS AND CONCLUSION: The forces were proportionately consistent with the increase in applied loads in both the situations. The use of a non-rigid connection did not show any major significance but in fact may be erroneous. The forces were considerably higher in the implant-tooth-connected situation. The results indicated that the differences in the forces exerted were not light and continuous and may not cause tooth intrusion. Natural tooth intrusion may be caused by reasons other than excessive forces and needs further investigation.