Accumulation of metals in selected macrophytes grown in mixture of drain water and tannery effluent and their phytoremediation potential.

Phytoremediation is an emerging, ecofriendly and economically feasible technique for the restoration of heavy metals contaminated environment. In the present investigation, five native macrophytes growing naturally in a drain receiving tannery effluent viz Bacopa monnieri, Eichhornia crassipes, Hydrilla verticillata, Ipomoea aquatica and Marsilea minuta were evaluated for their heavy metal (Cr, Cu, Ni and Pb) accumulation potential in field conditions at Unnao, U.P., India. The results showed that metal accumulation by these macrophytes differed among species and tissue parts. The concentration of Cr, Cu, Ni and Pb in the root tissues were estimated in the range 3.38 -45.59, 1.01 -16.85, 1.81-4.43 and 1.02 -4.24 µg g-1 d.wt., whereas the corresponding shoot values were 8.79 -48.81, 1.01-8.67, 0.84 -2.89 and 1.02 -2.84 for Cr, Cu, Ni and Pb respectively. Among the studied plants the translocation factor (TF) ranged between 1.07-2.60, 0.75-3.83, 1.44-2.57 and 0.49-3.76 for Cr, Cu, Ni and Pb, respectively. The highest metal TF was found in M. minuta (2.60, 3.83 and 2.57) for Cr, Cu and Ni respectively, whereas Pb was best translocated (3.76) by B. monnieri. Roots and shoots of the studied macrophytes showed a value of greater than 1 for metal enrichment coefficient. Findings suggest that E. crassipes can be used for phytoremediation of Cu and Ni whereas M. minuta and H. verticillata can be applied for the removal of Cr and Pb respectively from the contaminated water bodies.

Assessment of urban air pollution and it’s probable health impact.

The present study deals with the quantitative effect of vehicular emission on ambient air quality during May, 2006 in urban area of Lucknow city. In this study, SPM, RSPM, SO2, NOx and 7 trace metals associated with RSPM were estimated at 10 representative locations in urban area and one village area for control. Beside this, air quality index (AQI), health effects of different metals and mortality were assessed. The 24 hr average concentration of SPM, RSPM, SO2 and NOx was found to be 382.3, 171.5, 24.3 and 33.8 μg m-3 respectively in urban area and these concentrations were found to be significantly (p<0.01) higher by 94.8, 134.8, 107.4 and 129.6% than control site respectively. The 24 hr mean of SPM and RSPM at each location of urban area were found to be higher than prescribed limit of National Ambient Air Quality Standard (NAAQS) except SPM for industrial area. The 24 hr mean concentration of metals associated with RSPM was found to be higher than the control site by 52.3, 271.8, 408.9, 75.81, 62.7, 487.54 and 189.5 % for Fe, Cu, Pb, Zn, Ni, Mn and Cr respectively. The inter correlation of metals Pb with Mn, Fe and Cr; Zn with Ni and Cr; Ni with Cr; Mn with Fe and Cu with Cr showed significant positive relation either at p<0.05 or p<0.01 level. Metals Pb, Mn and Cr (p<0.01) and Cu (p<0.05) showed significant positive correlation with RSPM. These results indicate that ambient air quality in the urban area is affected adversely due to emission and accumulation of SPM, RSPM, SO 2 , NO x and trace metals. These pollutants may pose detrimental effect on human health, as exposure of these are associated with cardiovascular and respiratory diseases, neurological impairments, increased risk of preterm birth and even mortality and morbidity.

Accumulation and translocation of heavy metals in soil and plants from fly ash contaminated area.

The present investigation deals with the accumulation of heavy metals in fields contaminated with fly ash from a thermal power plant and subsequent uptake in different parts of naturally grown plants. Results revealed that in the contaminated site, the mean level of all the metals (Cd, Zn, Cr, Pb, Cu, Ni, Mn and Fe) in soil and different parts (root and shoots) of plant species were found to be significantly (p<0.01) higher than the uncontaminated site. The enrichment factor (EF) of these metals in contaminated soil was found to be in the sequence of Cd (2.33) > Fe (1.88) > Ni (1.58) > Pb (1.42) > Zn (1.31) > Mn (1.27) > Cr (1.11) > Cu (1.10). Whereas, enrichment factor of metals in root and shoot parts, were found to be in the order of Cd (7.56) > Fe (4.75) > Zn (2.79) > Ni (2.22) > Cu (1.69) > Mn (1.53) > Pb (1.31) > Cr (1.02) and Cd (6.06) ~ Fe (6.06) > Zn (2.65) > Ni (2.57) > Mn (2.19) > Cu (1.58) > Pb (1.37) > Cr (1.01) respectively. In contaminated site, translocation factor (TF) of metals from root to shoot was found to be in the order of Mn (1.38) > Fe (1.27) > Pb (1.03) > Ni (0.94) > Zn (0.85) > Cd (0.82) > Cr (0.73) and that of the metals Cd with Cr, Cu, Mn, Fe; Cr with Pb, Mn, Fe and Pb with Fe were found to be significantly correlated. The present findings provide us a clue for the selection of plant species, which show natural resistance against toxic metals and are efficient metal accumulators.

Fine particles (PM2.5) in ambient air of Lucknow city due to fireworks on Diwali festival.

People burn crackers world over on different occasions in different countries to express their happiness. Fireworks in large amounts aggravate the level of air pollutants and cause significant short-term air quality degradation with possible impact on human health. Fine particles (PM2.5 <2.5 μm), which may pose detrimental effects on human health and ecosystems were monitored in a residential area of Lucknow city to assess the elevated level due to bursting of firecrackers during Diwali festival. The 24 hr mean PM2.5 of normal day, pre Diwali day, Diwali day and post Diwali day was found to be 124, 154, 352 and 174 μg m-3 respectively and much above the US-EPA limit (65 μg m-3). The 12 hr mean concentration of PM2.5 on Diwali night (591 μg m-3) increased 3.9 fold than the respective night of normal day (159 μg m-3) and was significantly higher (p<0.01) than normal day and pre and post Diwali night. Mean comparison showed that Diwali day was significantly (p<0.01) different from others (except post Diwali day) and for this high accumulation during night time, after fireworks (suspension) was found to be more responsible than the period of lighting of crackers (formation). This study indicated that there is high accumulation of PM2.5 generated due to fireworks on Diwali festival which remains suspended in the air for upto 20 hr. During this period, extra mass burden of 289 μg m-3 equivalent to 1.9 normal day (of this study) was imposed in the environment. The short-term high accumulation of PM2.5 is a matter of serious concern for city dwellers as it can penetrate deep into the lungs and cause many respiratory and cardiovascular diseases.

Metals concentration associated with respirable particulate matter (PM10) in industrial area of Eastern U.P. India.

The present study deals with the assessment of ambient air quality with respect to respirable suspended particulate matter (RSPM or PM10 < or = 10 microm) and trace metals (Fe, Zn, Cu, Cr Ni, Cd, Mn and Pb) concentrations in RSPM at five locations of Renukoot, an industrial area of Eastern Uttar Pradesh. The 24 hr mean concentrations of PM10 ranged between 69.3 to 118.9 microg m(-3), which is well within the permissible limit (150 microg m(-3)) of national ambient air quality standards (NAAQS) but found higher than the prescribed annual daily limit of US EPA (50 microg m(-3)). The ambient air was mostly dominated by the Fe and least by the Cd among the metal analysed. Murdhawa, a commercial place influenced by vehicular population, is found to be the most polluted area of Renukoot and Dongia nalla (forest area) the least. The ambient air of Murdhawa is rich in Cu and Ni, indicating contribution of mobile sources. The Rammandir a residential place near the industry, is rich in Cd and Cr suggesting contribution of point sources. The Ni concentration is found to be alarmingly high in the air at all the locations except Dongia nallah, when compared with the EC (European Commission) limit (20 ng m(-3)). The Cd concentration is found to be higher only at Rammandir as compared with the EC limit (5 ng m(-3)). Mean concentrations of Zn, Pb and Mn are found to be almost equal in the ambient air of all the locations, suggesting the significance of sources contributing to presence of these metals. Zn, Cu, Pb and Ni having a significant correlation with PM10 indicate the same source contributing these metals as well as PM10. The present study has focused on the quantitative variation in different metals in the PM10, which is extremely harmful due to their toxic and carcinogenic nature.

Profile of noise pollution in Lucknow city and its impact on environment.

Automobiles, construction, festivals, factories, stations, diesel shades, garages and workshops are sources of noise. Vehicles are increasing enormously beyond the carrying capacity of the road. Study was carried out at 12 locations with sound level meter to assess day time and night time noise levels of Lucknow city. In residential areas, noise ranged between 67.7 to 78.9 and 52.9 to 56.4; in commercial cum traffic areas 74.8 to 84.2 and 68.2 to 74.9 and in industrial areas 76.9-77.2 and 72.2-73.1 dB(A) during day and night time respectively. Values were higher than their prescribed standards which may pose a significant impact on quality of life.

Environmental impact of noise levels in and around opencast bauxite mine.

Until recently, noise pollution has not been paid adequate attention as air, water and land pollution. In order to assess (predict) the impact of bauxite mine noise on employees health and in and around bauxite mine environment, general noise sources and equipment noise were monitored. All these noise sources were compared with prescribed standard noise levels laid down by Central Pollution Control Board (CPCB). Data has also been compared with reference site, north block hill top which is barren and virgin plateau/top covered with grass only and free from human interference. Equipment noise levels were much higher than the other zone of the mine which does not have the corresponding standards. Rock breaker recorded the highest noise level with 73.1 +/- 14.2 to 89.5 +/- 10.1 dB (A) while from ripper dozer it was least with 61.0 +/- 17.3 to 76.2 +/- 6.2 dB (A). Meteorological parameters did not have much influence upon equipment noise up to 100 feet from the source.

Assessment of industrial effluent and its impact on soil and plants.

The present study deals with the assessment of industrial water of an electronic component manufacturing unit with electroplating and its subsequent effects on soil and plants receiving the effluent. The physico-chemical parameters of the effluent samples showed higher value than that of ground water. The treated effluent was within the permissible limit. Microtox test was conducted and determined the degree of toxicity of untreated, treated effluents as well as the water sample collected at effluent discharge point of receiving river (confluence point). The physico- mechanical parameters of the soil samples were not changed due to irrigation of the treated effluent, but the concentration of metals were comparatively higher than the control soil. Higher accumulation of metals was found in the plant parts in naturally growing weeds and cultivated crop plant irrigated with treated effluent. Elevated accumulation of metals in Eichhornia crassipes and Marsilea sp. growing along the effluent channel has been identified as a potential source of biomonitoring of metals particularly for Cu and Ca and can be utilised for the removal of heavy metal from wastewater.