Development and validation of a method for quantitation of cefepime/avibactam in M-H broth: application to antibacterial activity using in vitro PK/PD Model / 中国临床药理学与治疗学

AIM: To establish a method for quantitation of cefepime and avibactam in M-H broth, and applicated in the in vitro dynamic PK/PD model. METHODS: The cefepime was also determined using the high-performance liquid chromatography method (HPLC), the avibactam was also determined using the liquid chromatography-mass spectrometry (LC-MS/MS), an in vitro dynamic PK/PD model was established to study the PK/PD relationship of cefepime/avibactam against carbapenem resistant Klebsiella pneumoniae (CRKP). RESULTS: The linear ranges of cefepime and avibactam were good at (0.5-20) and (0.1-25) μg/mL (r=0.999), and the lower limit concentrations were 0.5 and 0.1 μg/mL. The extraction recoveries of cefepime and avibactam in M-H broth were 88.0%-101.7% and 90.9%-95.2%, the relative standard deviation of intra-day precision and inter-day precision were less than 5.2%. The concentration-time curves were well simulated by the PK/PD model. All observed concentrations in each experiment were in the range of 20% of the targeted values. For the CRKP of MIC=8 μg/mL and MIC=16 μg/mL, the colony decreased to 2.783Log10 CFU/mL and 1.325Log10 CFU/mL at the cefepime/avibactam 2.5 g q8 h administration after 24 h. CONCLUSION: The determination method of cefepime and avibactam in broth established in this study has high sensitivity and good stability. For the CRKP with MIC≤8 μg/mL,cefepime/avibactam showed that good anti-CRKP activity under routine administration in vitro dynamic PK/PD model.

Treatment progress of relapsed/refractory follicular lymphoma / 白血病·淋巴瘤

Follicular lymphoma (FL) is the most common indolent B-cell lymphoma. The outcome of relapsed/refractory FL patients after multi-therapy is poor. The 64th American Society of Hematology annual meeting in 2022 announced the latest updates on relapsed/refractory FL, including targeted therapy, bio-specific antibodies and chimeric antigen receptor T-cell. This review provides an overview of these updates.

Lipopolysaccharides protect mesenchymal stem cell against cardiac ischemia-reperfusion injury by HMGB1/STAT3 signaling / 老年心脏病学杂志（英文版）

BACKGROUND@#Myocardial ischemia-reperfusion (I/R) is a serious and irreversible injury. Bone marrow-derived mesenchymal stem cells (MSCs) is considered to be a potential therapy for I/R injury due to the paracrine effects. High-mobility group box 1 (HMGB1) is a novel mediator in MSC and regulates the response of inflammation injury. Signal Transduction and Transcription Activator 3 (STAT3) is a critical transcription factor and important for release of paracrine factors. However, the relationship between HMGB1 and STAT3 in paracrine effect of MSC remains unknown.@*METHODS@#In vitro, hypoxia/reoxygenation injury model was established by AnaeroPack System and examined by Annexin V flow cytometry, CCK8 assay and morphology observation. Detection of apoptotic proteins and protein expression of HMGB1 and STAT3 by Western blot.@*RESULTS@#The conditioned medium of MSCs with or without LPS pretreatment was cocultured with H9C2 cells for 24 h before hypoxia treatment and MSC showed obvious cardiomyocytes protect role, as evidence by decreased apoptosis rate and improved cells viability, and LPS pretreated MSC exhibited better protect role than untreated MSC. However, such effect was abolished in HMGB1 deficiency group, silencing HMGB1 decreased the secretion of vascular endothelial growth factor (VEGF), hepatocyte growth factor (HGF), insulin growth factor (IGF), cell viability, and the expression of STAT3. Furthermore, STAT3 silence attenuated the protective effect of LPS in MSC.@*CONCLUSIONS@#These findings suggested that LPS improved MSC-mediated cardiomyocytes protection by HMGB1/STAT3 signaling.

Establishment and validation of a multigene model to predict the risk of relapse in hormone receptor-positive early-stage Chinese breast cancer patients / 中华医学杂志(英文版)

BACKGROUND@#Breast cancer patients who are positive for hormone receptor typically exhibit a favorable prognosis. It is controversial whether chemotherapy is necessary for them after surgery. Our study aimed to establish a multigene model to predict the relapse of hormone receptor-positive early-stage Chinese breast cancer after surgery and direct individualized application of chemotherapy in breast cancer patients after surgery.@*METHODS@#In this study, differentially expressed genes (DEGs) were identified between relapse and nonrelapse breast cancer groups based on RNA sequencing. Gene set enrichment analysis (GSEA) was performed to identify potential relapse-relevant pathways. CIBERSORT and Microenvironment Cell Populations-counter algorithms were used to analyze immune infiltration. The least absolute shrinkage and selection operator (LASSO) regression, log-rank tests, and multiple Cox regression were performed to identify prognostic signatures. A predictive model was developed and validated based on Kaplan-Meier analysis, receiver operating characteristic curve (ROC).@*RESULTS@#A total of 234 out of 487 patients were enrolled in this study, and 1588 DEGs were identified between the relapse and nonrelapse groups. GSEA results showed that immune-related pathways were enriched in the nonrelapse group, whereas cell cycle- and metabolism-relevant pathways were enriched in the relapse group. A predictive model was developed using three genes ( CKMT1B , SMR3B , and OR11M1P ) generated from the LASSO regression. The model stratified breast cancer patients into high- and low-risk subgroups with significantly different prognostic statuses, and our model was independent of other clinical factors. Time-dependent ROC showed high predictive performance of the model.@*CONCLUSIONS@#A multigene model was established from RNA-sequencing data to direct risk classification and predict relapse of hormone receptor-positive breast cancer in Chinese patients. Utilization of the model could provide individualized evaluation of chemotherapy after surgery for breast cancer patients.

Chuanxiong Rhizoma extracts prevent cholestatic liver injury by targeting H3K9ac-mediated and cholangiocyte-derived secretory protein PAI-1 and FN / 中国天然药物

Chuanxiong Rhizoma (CX, the dried rhizome of Ligusticum wallichii Franch.), a well-known traditional Chinese medicine, is clinically used for treating cardiovascular, cerebrovascular and hepatobiliary diseases. Cholestatic liver damage is one of the chronic liver diseases with limited effective therapeutic strategies. Currently, little is known about the mechanism links between CX-induced anti-cholestatic action and intercellular communication between cholangiocytes and hepatic stellate cells (HSCs). The study aimed to evaluate the hepatoprotective activity of different CX extracts including the aqueous, alkaloid, phenolic acid and phthalide extracts of CX (CXAE, CXAL, CXPA and CXPHL) and investigate the intercellular communication-related mechanisms by which the most effective extracts work on cholestatic liver injury. The active compounds of different CX extracts were identified by UPLC-MS/MS. A cholestatic liver injury mouse model induced by bile duct ligation (BDL), and transforming growth factor-β (TGF-β)-treated human intrahepatic biliary epithelial cholangiocytes (HIBECs) and HSC cell line (LX-2 cells) were used for in vivo and in vitro studies. Histological and other biological techniques were also applied. The results indicated that CXAE, CXAL and CXPHL significantly reduced ductular reaction (DR) and improved liver fibrosis in the BDL mice. Meanwhile, both CXAE and CXPHL suppressed DR in injured HIBECs and reduced collagen contraction force and the expression of fibrosis biomarkers in LX-2 cells treated with TGF-β. CXPHL suppressed the transcription and transfer of plasminogen activator inhibitor-1 (PAI-1) and fibronectin (FN) from the 'DR-like' cholangiocytes to activated HSCs. Mechanistically, the inhibition of PAI-1 and FN by CXPHL was attributed to the untight combination of the acetyltransferase KAT2A and SMAD3, followdd by the suppression of histone 3 lysine 9 acetylation (H3K9ac)-mediated transcription in cholangiocytes. In conclusion, CXPHL exerts stronger anti-cholestatic activity in vivo and in vitro than other CX extracts, and its protective effect on the intracellular communication between cholangiocytes and HSCs is achieved by reducing KAT2A/H3K9ac-mediated transcription and release of PAI-1 and FN.

Patent application of intelligent quality control technology in traditional Chinese medicine production process: a review / 中国中药杂志

In the new stage for intelligent manufacturing of traditional Chinese medicine(TCM) from pilot demonstration to in-depth application and comprehensive promotion, how to raise the degree of intelligence for the process quality control system has become the bottleneck of the development of TCM production process control technology. This article has sorted out 226 TCM intelligent manufacturing projects that have been approved by the national and provincial governments since the implementation of the "Made in China 2025" plan and 145 related pharmaceutical enterprises. Then, the patents applied by these pharmaceutical enterprises were thoroughly retrieved, and 135 patents in terms of intelligent quality control technology in the production process were found. The technical details about intelligent quality control at both the unit levels such as cultivation, processing of crude herbs, preparation pretreatment, pharmaceutical preparations, and the production workshop level were reviewed from three aspects, i.e., intelligent quality sensing, intelligent process cognition, and intelligent process control. The results showed that intelligent quality control technologies have been preliminarily applied to the whole process of TCM production. The intelligence control of the extraction and concentration processes and the intelligent sensing of critical quality attributes are currently the focus of pharmaceutical enterprises. However, there is a lack of process cognitive patent technology for the TCM manufacturing process, which fails to meet the requirements of closed-loop integration of intelligent sensing and intelligent control technologies. It is suggested that in the future, with the help of artificial intelligence and machine learning methods, the process cognitive bottleneck of TCM production can be overcome, and the holistic quality formation mechanisms of TCM products can be elucidated. Moreover, key technologies for system integration and intelligent equipment are expected to be innovated and accelerated to enhance the quality uniformity and manufacturing reliability of TCM.

Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines (Ⅱ): classification of tablets disintegration behavior / 中国中药杂志

In this paper, 50 batches of representative traditional Chinese medicine tablets were selected and the disintegration time was examined with the method in Chinese Pharmacopoeia. The disintegration time and disintegration phenomenon were recorded, and the dissolution behaviors of water-soluble and ultraviolet-absorbent components during the disintegration process of tablets were characterized by self-control method. The results revealed that coating type and raw material type influenced the disintegration time of tablets. It was found that only 4% of traditional Chinese medicine tablets had obvious fragmentation during the disintegration process, while 96% of traditional Chinese medicine tablets showed gradual dissolution or dispersion. Furthermore, according to the disintegration speed, disintegration phenomenon, and whether the cumulative dissolution of measured components was > 90% at complete disintegration, a disintegration behavior classification system(DBCS) was created for the regular-release traditional Chinese medicine tablets. As a result, the disintegration behaviors of 50 batches of traditional Chinese medicine tablets were classified into four categories, i.e. ⅠA_2, ⅠB_1, ⅡB_1, and ⅡB_2. traditional Chinese medicine tablets(Class I) with disintegration time ≤ 30 min were defined to be rapid in disintegration, which can be the objective of optimization or improvement of Chinese herbal extract(semi extract) tablets. Different drug release models were used to fit the dissolution curve of traditional Chinese medicine tablets with gradual dissolution or dispersion phenomenon(i.e. Type B tablets). The results showed that the dissolution curves of water-soluble components in the disintegration process conformed to the zero order kinetics and the Ritger-Peppas model. It could be inferred that the disintegration mechanisms of type B tablets were a combination of dissolution controlled and swelling controlled mechanisms. This study contributes to understanding the disintegration behavior of traditional Chinese medicine tablets, and provides a reference for the design and improvement of disintegration performance of traditional Chinese medicine tablets.

Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines(Ⅰ): classification of processing routes / 中国中药杂志

Oral solid dosage(OSD) occupies a key position in the market of Chinese patent medicines and new traditional Chinese medicines. Processing route is the foundation for the research and development of traditional Chinese medicine OSDs. On the basis of prescriptions and preparation methods of 1 308 traditional Chinese medicine OSDs recorded in the Chinese Pharmacopoeia, we summarized the patterns of processing routes of both modern dosage forms(tablets, granules, and capsules) and traditional dosage forms(pills and powder) and constructed a manufacturing classification system(MCS) based on the processing routes. Based on the MCS, statistical analyses were conducted respectively on medicinal materials, pharmaceutical excipients, extraction solvents in the pretreatment process, crushed medicinal materials, methods of concentration and purification, and methods of drying and granulation, aiming to uncover the process features. The results showed that each dosage form can be prepared via different routes with different processing methods of decoction pieces and raw materials for dosage preparation. The raw materials for dosage form preparation of traditional Chinese medicine OSDs included total extract, semi-extract, and total crushed powder, which accounted for different proportions. The raw materials for traditional dosage forms are mainly decoction pieces powder. Semi-extracts are the main raw materials for tablets and capsules, which account for 64.8% and 56.3%, respectively. Total extracts are the main raw materials for granules, with a proportion of 77.8%. Compared with tablets and capsules, traditional Chinese medicine granules with dissolubility requirements had a larger proportion of water extraction process, a higher proportion of refining process(34.7%), and a lower proportion of crushed medicinal mate-rials in semi-extract granules. There are four ways to add volatile oil to the modern dosage forms of traditional Chinese medicine. In addition, some new technologies and processes have been used in concentration, filtration, and granulation processes of traditional Chinese medicine OSDs, and the application of pharmaceutical excipients is diversified. The results of this study are expected to provide reference for the processing route design and upgrading of OSDs for new traditional Chinese medicines.

Research progress and maturity assessment of continuous manufacturing of traditional Chinese medicine / 中国中药杂志

The pharmaceutical manufacturing model is gradually changing from intermittent manufacturing to continuous manufacturing and intelligent manufacturing. This paper briefly reviewed the supervision and research progress in continuous pharmaceutical manufacturing in China and abroad and described the definition and advantages of continuous pharmaceutical manufacturing. The continuous manufacturing of traditional Chinese medicine(TCM) at the current stage was summarized in the following three terms: the enhancement of the continuity of intermittent manufacturing operations, the integration of continuous equipment to improve physical continuity between units, and the application of advanced process control strategies to improve process continuity. To achieve continuous manufacturing of TCM, the corresponding key technologies, such as material property characterization, process modeling and simulation, process analysis technology, and system integration, were analyzed from the process and equipment, respectively. It was proposed that the continuous manufacturing equipment system should have the characteristics of high speed, high response, and high reliability, "three high(H~3)" for short. Considering the characteristics and current situation of TCM manufacturing, based on the two dimensions of product quality control and production efficiency, a maturity assessment model for continuous manufacturing of TCM, consisting of operation continuity, equipment continuity, process continuity, and quality control continuity, was proposed to provide references for the application of continuous manufacturing technology for TCM. The implementation of continuous manufacturing or the application of key continuous manufacturing technologies in TCM can help to systematically integrate advanced pharmaceutical technology elements and promote the uniformity of TCM quality and the improvement of production efficiency.

Therapeutic effect of ursodeoxycholic acid-berberine supramolecular nanoparticles on ulcerative colitis based on supramolecular system induced by weak bond / 中国中药杂志

Ulcerative colitis(UC) is a recurrent, intractable inflammatory bowel disease. Coptidis Rhizoma and Bovis Calculus, serving as heat-clearing and toxin-removing drugs, have long been used in the treatment of UC. Berberine(BBR) and ursodeoxycholic acid(UDCA), the main active components of Coptidis Rhizoma and Bovis Calculus, respectively, were employed to obtain UDCA-BBR supramolecular nanoparticles by stimulated co-decocting process for enhancing the therapeutic effect on UC. As revealed by the characterization of supramolecular nanoparticles by field emission scanning electron microscopy(FE-SEM) and dynamic light scattering(DLS), the supramolecular nanoparticles were tetrahedral nanoparticles with an average particle size of 180 nm. The molecular structure was described by ultraviolet spectroscopy, fluorescence spectroscopy, infrared spectroscopy, high-resolution mass spectrometry, and hydrogen-nuclear magnetic resonance(H-NMR) spectroscopy. The results showed that the formation of the supramolecular nano-particle was attributed to the mutual electrostatic attraction and hydrophobic interaction between BBR and UDCA. Additionally, supramolecular nanoparticles were also characterized by sustained release and pH sensitivity. The acute UC model was induced by dextran sulfate sodium(DSS) in mice. It was found that supramolecular nanoparticles could effectively improve body mass reduction and colon shortening in mice with UC(P<0.001) and decrease disease activity index(DAI)(P<0.01). There were statistically significant differences between the supramolecular nanoparticles group and the mechanical mixture group(P<0.001, P<0.05). Enzyme-linked immunosorbent assay(ELISA) was used to detect the serum levels of tumor necrosis factor-α(TNF-α) and interleukin-6(IL-6), and the results showed that supramolecular nanoparticles could reduce serum TNF-α and IL-6 levels(P<0.001) and exhibited an obvious difference with the mechanical mixture group(P<0.01, P<0.05). Flow cytometry indicated that supramolecular nanoparticles could reduce the recruitment of neutrophils in the lamina propria of the colon(P<0.05), which was significantly different from the mechanical mixture group(P<0.05). These findings suggested that as compared with the mechanical mixture, the supramolecular nanoparticles could effectively improve the symptoms of acute UC in mice. The study provides a new research idea for the poor absorption of small molecules and the unsatisfactory therapeutic effect of traditional Chinese medicine and lays a foundation for the research on the nano-drug delivery system of traditional Chinese medicine.

A robust microsatellite instability detection model for unpaired colorectal cancer tissue samples / 中华医学杂志(英文版)

BACKGROUND@#Microsatellite instability (MSI) is a key biomarker for cancer immunotherapy and prognosis. Integration of MSI testing into a next-generation-sequencing (NGS) panel could save tissue sample, reduce turn-around time and cost, and provide MSI status and comprehensive genomic profiling in single test. We aimed to develop an MSI calling model to detect MSI status along with the NGS panel-based profiling test using tumor-only samples.@*METHODS@#From January 2019 to December 2020, a total of 174 colorectal cancer (CRC) patients were enrolled, including 31 MSI-high (MSI-H) and 143 microsatellite stability (MSS) cases. Among them, 56 paired tumor and normal samples (10 MSI-H and 46 MSS) were used for modeling, and another 118 tumor-only samples were used for validation. MSI polymerase chain reaction (MSI-PCR) was performed as the gold standard. A baseline was built for the selected microsatellite loci using the NGS data of 56 normal blood samples. An MSI detection model was constructed by analyzing the NGS data of tissue samples. The performance of the model was compared with the results of MSI-PCR.@*RESULTS@#We first intersected the target genomic regions of the NGS panels used in this study to select common microsatellite loci. A total of 42 loci including 23 mononucleotide repeat sites and 19 longer repeat sites were candidates for modeling. As mononucleotide repeat sites are more sensitive and specific for detecting MSI status than sites with longer length motif and the mononucleotide repeat sites performed even better than the total sites, a model containing 23 mononucleotide repeat sites was constructed and named Colorectal Cancer Microsatellite Instability test (CRC-MSI). The model achieved 100% sensitivity and 100% specificity when compared with MSI-PCR in both training and validation sets. Furthermore, the CRC-MSI model was robust with the tumor content as low as 6%. In addition, 8 out of 10 MSI-H samples showed alternations in the four mismatch repair genes ( MLH1 , MSH2 , MSH6 , and PMS2 ).@*CONCLUSION@#MSI status can be accurately determined along the targeted NGS panels using only tumor samples. The performance of mononucleotide repeat sites surpasses loci with longer repeat motif in MSI calling.

Key quality attributes of benchmark samples of famous classical formula Kaixin Powder / 中国中药杂志

We prepared 15 batches of Kaixin Powder benchmark samples with the decoction pieces of different batches. Further, we established the specific chromatograms and index component content determination method of Kaixin Powder benchmark samples and analyzed the peaks and similarity of the chromatograms. With sibiricose A5, sibiricose A6, polygalaxanthone Ⅲ, 3,6'-disinapoyl sucrose, ginsenoside Rb_1, β-asarone, α-asarone, and dehydropachymic acid as index components, the index component content determination method was established and 70%-130% of the mean content of each component was set as the range. The chromatograms of 15 batches of Kaixin Powder benchmark samples had a total of 22 characteristic peaks, among which 8 peaks were identified, which represented sibiricose A5, sibiricose A6, polygalaxanthone Ⅲ, 3,6'-disinapoyl sucrose, ginsenoside Rb_1, β-asarone, α-asarone, and dehydropachymic acid, respectively. The chromatograms shared the similarity of 0.992-0.999. The 15 batches of benchmark samples had sibiricose A5 of 0.34-0.55 mg·g~(-1), sibiricose A6 of 0.43-0.57 mg·g~(-1), polygalaxanthone Ⅲ of 0.12-0.19 mg·g~(-1), 3,6'-disinapoyl sucrose of 1.08-1.78 mg·g~(-1), ginsenoside Rb_1 of 0.33-0.62 mg·g~(-1), β-asarone of 2.34-3.72 mg·g~(-1), α-asarone of 0.11-0.22 mg·g~(-1), and dehydropachymic acid of 0.053-0.079 mg·g~(-1). This study established the specific chromatograms and index component content determination method of Kaixin Powder benchmark samples, and the method was simple, feasible, reproducible, and stable. This study provides a scientific basis for further research on the key chemical properties of the benchmark samples and preparations of Kaixin Powder.

Investigation of familial tendency of endometriosis / 中华妇产科杂志

Objective: To investigate the familial heritability of endometriosis and to compare the clinical characteristics of patients with or without a family history of endometriosis. Methods: From January 2020 to June 2022, 850 patients with endometriosis confirmed by laparotomy or laparoscopy in Peking University Third Hospital were included in this study. Clinical data were collected, family history was followed up, and the differences of clinical indicators between patients with and without family history of endometriosis were compared. Results: A total of 850 patients were enrolled, with an average age of (33.8±7.0) years old, 315 (37.1%, 315/850) patients in stage Ⅲ and 496 (58.4%, 496/850) patients in stage Ⅳ. There were 100 patients with family history of endometriosis, accounting for 11.8% (100/850). Most of the 113 relatives involved were mothers, daughters and sisters (76.1%, 86/113), 81.5% (22/27) of the second and third degree relatives were maternal relatives. The median ages of patients with and without family history of endometriosis were 30 and 33 years old respectively at the time of diagnosis. The unmarried rate of patients with family history was higher [42.0% (42/100) vs 26.3% (197/750)]. The percentage of dysmenorrhea patients with family history was higher [89.0% (89/100) vs 55.5% (416/750)]. The medians of dysmenorrhea score in patients with and without family history were 6 and 2, and the median durations of dysmenorrhea were 10 and 1 years. There were significant differences in age, marital status, percentage of dysmenorrhea, dysmenorrhea score and duration (all P<0.001). The median levels of serum cancer antigen (CA) 125 in patients with family history and patients without family history at the time of diagnosis were 57.5 and 46.9 kU/L respectively, with a statistically significant difference (P<0.05). However, there were no significant differences between the two groups in nationality, bady mass index, menarche age, menstrual cycle, menstrual period, menstrual volume, serum CA19-9 level, cyst location and size, stage, history of adverse pregnancy and childbirth, infertility, adenomyosis and deep infiltrating endometriosis (all P>0.05). By comparing the specific conditions of dysmenorrhea patients with and without family history of endometriosis, there were no significant differences between the two groups in terms of the age of onset of dysmenorrhea, duration of dysmenorrhea, primary and secondary dysmenorrhea, and progressive aggravation of dysmenorrhea (all P>0.05). The difference in the degree of dysmenorrhea in dysmenorrhea patients with family history of endometriosis was significant (P<0.001). Conclusions: The incidence of endometriosis has a familial tendency, and most of the involved relatives are the first degree relatives. Compared with patients without family history of endometriosis, endometriosis patients with family history are diagnosed at an earlier age, with higher percentage of dysmenorrhea, had more severe dysmenorrhea and higher serum CA125 level.

Platelet-rich Plasma Induces M2 Macrophage Polarization via Regulating AMPK Singling Pathway / 中国实验血液学杂志

OBJECTIVE@#To investigate the role of platelet-rich plasma (PRP) in inducing the M2 macrophage polarization via regulating AMPK singling pathway.@*METHODS@#The expressions of M1 marker CD11c and M2 marker CD206 in macrophages of blank control group, LPS group, LPS+PRP group, and LPS+PRP+Compound C group were detected by flow cytometry. Western blot was used to observe the effects of PRP on the expression of AMPK-mTOR signaling pathway-related proteins at different times (12 h, 18 h and 24 h) after LPS treatment. RNA interference technology was used to silence the expression of AMPK in macrophages, and the expression of TGF-β protein was subsequently examined by Western blot.@*RESULTS@#LPS significantly reduced the expression of CD206 and increased the expression of CD11c (P <0.05). After the addition of PRP, the expression of CD206 was significantly increased (P <0.05), while the expression of CD11c was significantly decreased (P <0.05). Compared with LPS group, PRP treatment significantly increased the expressions of p-AMPK and p-ULK1 proteins at 12 h, 18 h and 24 h, while significantly decreased the expression of p-mTOR protein (P <0.05). After the addition of AMPK inhibitor Compound C, the expression of CD206 was significantly reduced (P <0.05) and the expression of CD11c was significantly increased compared with LPS+PRP group (P <0.05). After silencing the expression of AMPK in macrophages, the promotion effect of PRP on TGF-β was significantly reduced (P <0.05).@*CONCLUSION@#PRP can stimulate the transformation of macrophages to M2 type via AMPK signalling pathway.

Discrete element simulation study of mixing process of Guizhi Fuling Capsules: parameter calibration / 中国中药杂志

The mixing process is a critical link in the formation of oral solid preparations of traditional Chinese medicine. This paper took the extract powder of Guizhi Fuling Capsules and Paeonol powder as research objects. The angle of repose, loose packing density, and particle size of the two powders were measured to calibrate discrete element simulation parameters for the mixing process. The discrete element method was used to calibrate the simulated solid density of Paeonol powder and extract powder of Guizhi Fuling Capsules based on the Hertz-Mindlin with JKR V2 contact model and particle scaling. The Plackett-Burman experimental design was used to screen out the critical contact parameters that had a significant effect on the simulation of the angle of repose. The regression model between the critical contact parameters and the simulated angle of repose was established by the Box-Behnken experimental design, and the critical contact parameters of each powder were optimized based on the regression model. The best combination of critical contact parameters of the extract powder of Guizhi Fuling Capsules was found to be 0.51 for particle-particle static friction coefficient, 0.31 for particle-particle rolling friction coefficient, and 0.64 for particle-stainless steel static friction coefficient. For Paeonol powder, the best combination of critical contact parameters was 0.4 for particle-particle static friction coefficient and 0.19 for particle-particle rolling friction coefficient. The best combination of contact parameters between Paeonol powder and extract powder of Guizhi Fuling Capsules was 0.27 for collision recovery coefficient, 0.49 for static friction coefficient, and 0.38 for rolling friction coefficient. The verification results show that the relative error between the simulated value and the measured value of the angle of repose of the two single powders is less than 1%, while the relative error between the simulated value and the measured value of the angle of repose of the mixed powder with a mass ratio of 1∶1 is less than 4%. These research results provide reliable physical property simulation data for the mixed simulation experiment of extract powder of Guizhi Fuling Capsules and Paeonol powder.

Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines(Ⅳ): classification of hygroscopicity behaviors of capsules / 中国中药杂志

Hard capsules of traditional Chinese medicine(TCM) have different degrees of hygroscopicity, which affects the stability and efficacy of drugs. In this paper, 30 kinds of commercially available TCM capsules were used as the research object. The hygroscopicity curves of capsule contents, capsule shells, and capsules were tested respectively, and the first-order kinetic equation was used for fitting. The results show that during the 24 h hygroscopicity process, the capsule shell can reduce the weight gain caused by the hygroscopicity of the contents by 0.80%-53.0% and the hygroscopicity rate of the capsule contents by 1.74%-91.3%, indicating that the capsule shell has a strong delay effect on the hygroscopicity of the contents of the TCM capsules. Seven physical parameters of the contents of 30 kinds of TCM capsules were determined, and 14 prescription process-related parameters were sorted out. A partial least squares model for predicting the hygroscopicity rate of the contents of TCM capsules(with shell) for 24 h was established. It is found that the hygroscopicity rate of the capsule shell is positively correlated with the hygroscopicity of the contents of TCM capsules(with shell), suggesting that the capsule shell with a low hygroscopicity rate is helpful for moisture prevention. In addition, the pre-treatment process route of the preparation and the type of molding raw materials affect the hygroscopicity. A larger proportion of the extract in the capsule content and a smaller proportion of the fine powder of the decoction pieces indicate stronger hygroscopicity of the capsule content. The 24 h hygroscopicity rate of 15% was used as the classification node of hygroscopicity strength, and the hygroscopicity rate constant of 0.58 was used as the classification node of hygroscopicity speed. The classification system of hygroscopicity behaviors of TCM capsules was established: the varieties with strong and fast hygroscopicity accounted for about 6.67%, while those with strong and slow hygroscopicity accounted for about 33.3%; the varieties with weak and fast hygroscopicity accounted for about 26.7%, while those with weak and slow hygroscopicity accounted for about 33.3%. The classification system is helpful to quantify and compare the hygroscopicity behavior of different TCM capsules and provides a reference for the quality improvement, moisture prevention technologies, and material research of TCM capsules.

Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines(Ⅲ): classification of granule dissolving behaviors / 中国中药杂志

Solubility is an important sensory quality attribute of traditional Chinese medicine(TCM) granules. In this paper, 90 batches of granules(30 batches of TCM formula granules, 30 batches of Chinese patent medicine granules and 30 batches of Japanese Kampo granules) were used as the research objects. The turbidity sensor was used to characterize the turbidity curve of the granule dissolution process. The classification system of granule dissolution behaviors was constructed from three dimensions: dissolution degree, equilibrium time, and dissolution mechanism. According to the equilibrium time, the granule dissolution rates were divided into three categories : faster(<100 s), general(101-300 s) and slow(>301 s). According to the turbidity curve profile, the granule dissolution mechanisms were classified into dissolution-controlled type(α-type), dispersion-controlled type(β-type), and dispersion-controlled type followed by dissolution-controlled type(γ-type). The proportion of TCM formula granules, Chinese patent medicine granules and Japanese Kampo granules with complete dissolution or slight turbidity at the end of dissolution was 46.7%, 96.7%, and 10.0%. The proportion of TCM formula granules, Chinese patent medicine granules, and Japanese Kampo granules with faster dissolution rates(<100 s) was 23.3%, 26.7%, and 40.0%. The average dissolution rate of Japanese Kampo granules was faster than that of TCM formula granules, and it was slightly faster than the average dissolution rate of Chinese patent medicine granules. The dissolution mechanism of Chinese patent medicine granules was mainly α-type, while that of Japanese Kampo granules was mainly β-type, and the three types of dissolution mechanisms of TCM formula granules accounted for a relatively average. The purpose of improving the solubility and dispersion of granules can be achieved by combining the comprehensive application of various functional excipients with the small dosage of Japanese Kampo granules and the wide addition scope of excipients. In the process of transforming TCM compound prescriptions into formulas, there is still much room for innovation in formula excipients and process optimization.

Intelligent co-design of material, process, and equipment for manufacturing high-quality traditional Chinese medicine preparations / 中国中药杂志

In the context of Pharma 4.0, the design tools that support the pharmaceutical Quality by Design(QbD) are iterating fast toward intelligent or smart design. The conventional development methods for traditional Chinese medicine(TCM) preparations have the limitations such as over dependence on experience, low dimensions for the designed experiment parameters, poor compatibility between the process and equipment, and high trial-and-error cost during process scale-up. Therefore, this paper innovatively proposed the intelligent co-design involving material, process, and equipment for manufacturing high-quality TCM preparations, and introduced the design philosophy, targets, tools, and applications with TCM oral solid dosage(OSD) as an example. In terms of design philosophy, the pharmaceutical design tetrahedron composed of critical material attributes, critical process parameters, critical equipment attributes, and critical quality attributes was developed. The design targets were put forward based on the product performance classification system. The design tools involve a design platform that contains several modules, such a as the iTCM material database, the processing route classification system, the system modeling and simulation, and reliability-based optimization. The roles of different modules in obtaining essential and universal design knowledge of the key common manufacturing units were introduced. At last, the applications of the co-design methodology involving material, process, and equipment in the high shear wet granulation process development and the improvement of the dissolving or dispersion capability of TCM formula granules are illustrated. The research on advanced pharmaceutical design theory and methodology will help enhance the efficiency and reliability of drug development, improve the product quality, and promote the innovation of high-end TCM products across the industry.

Multicenter study of venetoclax-based combined regimen in treatment of adult acute myeloid leukemia / 白血病·淋巴瘤

Objective:To investigate the efficacy of venetoclax-based combined regimen in treatment of adult patients with acute myeloid leukemia (AML).Methods:The data of 50 adult AML (non-acute promyelocytic leukemia) who received venetoclax-based combined regimen in the First Affiliated Hospital of Xiamen University, Dongguan People's Hospital, the First Hospital of Longyan City, Jieyang People's Hospital from December 2018 to May 2021 were retrospectively analyzed. Different doses venetoclax combined with demethylation drugs or low-dose chemotherapy regimen were used to analyze the therapeutic efficacy. The related factors influencing efficacy were analyzed by using logistic regression.Results:The composite complete remission (CR) rate of 50 AML patients was 62.0% (31/50), the overall response rate (ORR) was 76.0% (38/50); 28 patients achieved effectiveness [CR and partial remission (PR)] after the first cycle and could achieve effectiveness by 3 courses of treatment at the latest. Among 50 patients, 28 cases were newly diagnosed AML, the composite CR rate was 60.8% (17/28), ORR was 78.6% (22/28); 22 cases were recurrent and relapsed, the composite CR rate was 63.6% (14/22), ORR was 72.7% (16/22); and there was no statistically significant difference of ORR between the both groups ( χ2 = 0.23, P = 0.743). Logistic regression multivariate analysis showed age was the only independent influencing factor for the treatment effectiveness ( OR = 8.451, 95% CI 1.306-54.697, P = 0.025). The median duration time of patients receiving venetoclax treatment regimen was 4.5 months (1.1-15.0 months); 16 cases who had treatment effectiveness finally relapsed, the median time of maintaining effectiveness was 5 months (1.1-11.0 months). Additionally, the common treatment-related adverse reactions included bone marrow suppression after treatment, followed by some gastrointestinal reactions like nausea, vomiting and stomachache. In addition, no patient stopped medication for more than 1 week due to bone marrow suppression related complications. Conclusion:Venetoclax-based combined regimen shows a good short-term efficacy in treatment of AML. It is also effective and tolerable for elderly patients receiving reduced dose therapy.

Progress in the treatment of relapsed/refractory follicular lymphoma / 白血病·淋巴瘤

Follicular lymphoma (FL) is the most common indolent B-cell lymphoma. Although patients with FL generally have a good prognosis, the treatment of relapsed/refractory FL remains a challenge. The 63rd American Society of Hematology (ASH) Annual Meeting announced the latest updates on relapsed/refractory FL, including the usage of targeted therapy, bio-specific antibodies and chimeric antigen receptor T-cell (CAR-T) therapy. This article provides an overview of the updates in combination with the reports presented at the ASH Annual Meeting.