Green conversion of municipal solid wastes into fuels and chemicals

Presently, the society is facing a serious challenge for the effective management of the increasing amount of produced municipal solid wastes. The accumulated waste has caused a series of environmental problems such as uncontrolled release of greenhouse gases. Moreover, the increasing amount of wastes has resulted in a shortage of areas available for waste disposal, resulting in a nonsustainable waste management. These problems led to serious public concerns, which in turn resulted in political actions aiming to reduce the amount of wastes reaching the environment. These actions aim to promote sustainable waste management solutions. The main objective of these policies is to promote the recycling of municipal solid waste and the conversion of waste to energy and valuable chemicals. These conversions can be performed using either biological (e.g., anaerobic digestion) or thermochemical processes (e.g., pyrolysis). Research efforts during the last years have been fruitful, and many publications demonstrated the effective conversation of municipal solid waste to energy and chemicals. These processes are discussed in the current review article together with the change of the waste policy that was implemented in the EU during the last years.

The use of chitosan in protecting wooden artifacts from damage by mold fungi

Background: Many buildings in Egypt e.g. museums, mosques and churches, do not possess controlled environments for minimizing the risks of damage of wooden artifacts due to the growth of fungi. Fungal damage usually appears as change in wood color, appearance of stains, and sometimes deformation of wooden surfaces. In this study we focused on the effect that some fungi exert on the properties of wooden artifacts and evaluated the effectiveness of different concentrations of chitosan on their protection against damage by mold fungi. Results: Samples were collected from different monuments and environments, and fungi growing on them were isolated and identified. The isolated Penicillium chrysogenum, Aspergillus flavus and /Aspergillus niger strains were used for the infestation of new pitch pine samples. The results revealed that the lightness of samples infected with any of the tested fungi decreased with increasing incubation times. XRD analysis showed that the crystallinity of incubated samples treated individually with the different concentrations of chitosan was lower than the crystallinity of infected samples. The crystallinity index measured by the first and the second method decreased after the first and second months but increased after the third and fourth months. This may due to the reducing of amorphous part by enzymes or acids produced by fungi in wooden samples. Conclusions: The growth of fungi on the treated wood samples decreased with increasing the concentration of chitosan. Hence, it was demonstrated that chitosan prevented fungal growth, and its use could be recommended for the protection of archeological wooden artifacts.