Design of a high speed data acquisition system for biological mass spectrometers / 军事医学

Objective To develop a high-speed data acquisition system with sampling frequency of 2 GHz to meet the requirement of accurate measurement of flight time.Methods The ALTERA STRATIX Ⅲ series FPGA was used as the main control chip, matching with high-performance ADC chip with sampling frequency up to 2 GHz and sampling accuracy up to 12 bit, while extending 512 MB DDR3 SDRAM for data cache and exchanging data with the host computer through Gigabit Ethernet.In addition, a variety of PCB wiring methods were used to effectively ensure the signal integrity.Results The 250 MHz sine signal was input into the data acquisition board with 2 GHz sampling frequency,by analyzing and calculating the sampling data,acquired the following performance index of SNR=44.6639 and ENOB=7.1.Conclusion This high-speed data acquisition system based on ADC technology is a fast and reliable path and method for the measurement and analysis of biological mass spectrometry data.

Determination of multiple optical parameters of red blood cell suspension / 军事医学

Objective To develop a measurement method for determination of optical parameters of a red blood cell ( RBC) suspension based on the measurement of spatial scattered light signals without using an integrating sphere.Methods Multiple independent photoelectric sensors and light intensity modulation were used to obtain the measured values of diffuse reflectance,diffuse transmittance and collimated transmittance.The measured data results were imported into a Monte Carlo simulation based RTE to inversely determine the absorption coefficient, scattering coefficient and anisotropy factor of the measured sample using a new perturbation method.Results The described measurement method was applied to determine the optical parameters of a polystyrene microsphere suspension with a mean diameter of 2.6μm,and the results were essen-tially consistent with the calculated optical parameters by Mie code.Then, the RBC suspension was used for testing optical parameters,and the results were basically consistent with the parameters in the literature.Conclusion The system based on the measurement of spatial scattered light signals without using an integrating sphere will provide a quick and accurate approach for quantitative analysis of free hemoglobins and RBC suspensions.

Design of a portable oxygen supply respirator / 军事医学

Objective To design a portable respirator that can facilitate both cardiopulmonary resuscitation and auxiliary oxygen inhalation.Methods Positive pressure design as well as pneumatically powered and controlled design were adopted for this respirator.Theoretical calculation of key components was carried out.The virtual prototype was established and the structure checked using the three dimensional design software Solidedge.Finally,the prototype was processed,assembled and tested.Results Experimental tests proved that the designed respirator was capable of cardiopulmonary resuscitation and auxiliary oxygen inhalation when oxygen supply pressure reached 3 -5.5 bar.It could achieve the expected technical indicators,such as the oxygen flow rate that was between 10 and 12 L/min.Conclusion The portable oxygen supply respirator has the advantages of a small size,light weight,simple operation,and automatic power supply.It has broad prospects of application.

Design and implementation of auto-control system for high-throughput and multi-channel DNA synthesis / 军事医学

Objective To establish an auto-control system for high-throughput and multi-channel DNA synthesis which can simultaneously and quickly synthesize up to 96 different oligonucleotides in a 96-well microtiter format.Methods The PLC and its extended modules is used as the main-control unit, which executes the DNA automatic synthesis process according to the synthesis sequences and steps set by the user,and the manual injecting reagent etc.And the configuration software and VC6.0 were used for programming the man-machine interface sofeware to set synthesis parameters, position calibration,flux calibration data etc, and communicated with PLC.Results The synthesis application of about 150 000 DNA chains has proved that the synthesis cycle time for 96 couplings was 4 min,the average coupling efficiency was 99%across the entire 96-well plate,the monomer reagent usage was reduced by 50 percent,and the synthesis configuration was more flexible.Conclusion A reliable and simple auto-control system is provided for parallel synthesis of 96-channel oligonucleotide chains,which can meet the demands of high-throughput and multi-channel DNA synthesis.

Application of Fussy-PID Control in Freeze-Drier / 医疗卫生装备

Objective To improve the freeze-dryer shelf temperature control effect.Methods The fuzzy-PID control algorithm that's adjusting the PID parameters in real-time in the control process,was adopted to control the shelf temperature,expecting to adapt the changing of process parameters of shelf.Results In the process of freeze-drying temperature control shelves,the shelf temperature static performance and dynamic performance were improved,and the effect of shelf temperature control was archived satisfyingly.Conclusion In the freeze-drying process,the process parameters of shelf are changed along with the drying time and the working environment.The conventional PID control is difficult to obtain satisfactory results.The fuzzy-PID controller,which can adjust PID parameters on real-time in the controlling process,be used in the shelf temperature control,and the result is satisfied.

The Design of the control system of radiating therapeutic instrument / 医疗卫生装备

The control system of radiating therapeutic instrument, powerful and reliable, is designed with the new chips of P89LPC669 and MAX669. Its hardware organization, system function and software framework are introduced in this paper.