RESUMO
The interaction between the surface of stainless steel and Bacillus cereus was studied in terms of the characteristics of interfacial interaction determined from the measurement of the contact angle of the surface of B. cereus and stainless steel in the presence or absence of B. cereus adherence. The microtopographies and the roughness of the surface of stainless steel and stainless steel adhered by B. cereus were evaluated with the help of atomic force microscopy and perfilometry. The strain of B. cereus studied was considered hydrophilic, whereas the stainless steel was considered hydrophobic. The adhesion was not thermodynamically favorable (ΔGadhesion > 0) between the stainless steel and the strain of B. cereus studied. Thus, the interaction between them was not favored by the thermodynamic aspect of adhesion. There was no difference (p > 0.05) in the roughness of the surfaces of stainless steel adhered by B. cereus when analyzed by atomic force microscope and perfilometry.
RESUMO
Efficiency of ultraviolet (UV) radiation in reducing the cell number of Staphylococcus aureus ATCC 25923 and Escherichia coli K-12 adhered to low-density polyethylene (LDPE) films was evaluated. The microorganisms were let to adhere to the surface of LPDE bags for 12h at 18liC, and then submitted to UV radiation at an intensity 196 icW.cm-2, 254nm, for 2 seconds. Staphylococcus aureus was less resistant to UV radiation than E. coli, and the efficiency increased with the increase of the concentration of microbial suspension. After 1500 hours of use the UV radiation intensity of the lamp was reduced from 288 to 78 icW.cm-2, and the higher decrease occurred in the first 100 hours of use. Also, the efficiency of the UV radiation decreased after 1500 hours of use. The number of mesophilic aerobes on the surface of LDPE films was reduced by 90 percent after irradiation with 137 icW.cm-2 for 2 seconds. Atomic force microscopy revealed cracks and crevices and protuberances on the LDPE surface, a topography that can protect the cells from UV radiation, reducing the efficiency of the process. The results showed that UV radiation can be a useful technique for reducing the microbiota adhered to LDPE films.