A novel europium doped apatite/wollastonite porous magnetic bioactive glass ceramic / 生物医学工程学杂志

A new biocompatible apatite-wollastonite magnetic glass ceramic has been synthesized via sol-gel process. Characteristics of the materials were determined with differential thermal analysis (DTA), X-ray diffraction (XRD), scan electron microscopy (SEM), energy dispersive spectrum (EDS), inductively couple plasma atomic emission spectroscopy (ICP-AES), vibrating sample magnetometer (VSM) and so on. Results showed that the main crystalline phases of the material were hydroxyapatite/fluoroapatite [Ca10(PO4)6(OH, F)), beta-wollastonite[beta-CaSiO3] and calcium europium oxide silicate Ca2Eu8[(SiO4)6O2]. The magnetization of the sample contanining 2% Eu2O3 in weight reached 2.18 emu/g for an applied field of 10 000Oe. Hydroxyapatite layer could form on the surface of the sample while soaking for 14 days in simulated body fluid. Good bioactivity was demonstrated. So it is a potential bone repairing material as well as a hyperthemia treatment material for pateints with cancer.

Analysis of FT-IR-ATR spectra of serum proteins adsorbed on carbonaceous materials / 生物医学工程学杂志

To clarify the reason causing difference of serum proteins adsorbability on different carbonaceous materials, FT-IR-ATR spectra of human serum albumin (HSA) and human serum fibrinogen(HFG) before and after adsorbing on diamond like carbon film (DLC),diamond film (DF) and graphite were analyzed. It has been shown that there are hydrogen bond because of -NH at the interfaces of HSA-DLC, HFG-DF and HFG-graphite. Based on the results, earlier research conclusion that the adsorbability of HSA on DLC higher than that on DF and graphite, but on DF and graphite the adsorption of HFG takes precedence can be explained rationally.

Bioactivity of sol-gel derived apatite/wollastonite porous bioactive glass-ceramic / 中国组织工程研究

BACKGROUND: Apatite-wollastonite containing glass-ceramic (AWGC) is a kind of good bone repairing materials with excellent bioactivity, which is prepared by traditional melting process.OBJECTIVE: To observe AWGC prepared with sol-gel method and its bioactivity.DESIGN: Design experiment of materials process and in vitro bioactivity experiment.SETTING: College of materials science and Engineering of Sichuan University.MATERIALS: AWGC.METHODS: This experiment was conducted at the laboratory of College of Materials Science and Engineering of Sichuan University between August 2002 and May 2003. AWGC was prepared from sol-gel and followed by heattreating process. Bioactivity was investigated in vitro by immersing in the simulate body fluid (SBF) at 37 ℃ for 7 days . JL-1155 laser particle analyzer, X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscope were used for micro-morphological structure analysis.MAIN OUTCOME MEASURES: ①The crystalline structure and microstructure of sol-gel derived glass-ceramic② The apatite forming process in simulate body fluid③ The diameter of the pore of the sol-gel derived apatite/wollastonite glass-ceramicRESULTS: ①Main crystalline phases of the sol-gel derived glass-ceramic materials were hydroxyapatite/fluoroapatite [Ca10(PO4)6(OH, F)] and β-wollastonite[β-CaSiO3]; Microstructure contained many micro-pores of 2-3μ m;② Sol-gel derived AW glass ceramic had excellent bioactivity: plenty of apatite granules were generated on the surface of the material after soaking for 7 days. ③Porous scaffolds possessed good macro-porous structure with the interconnected macro pores of 300-400 μm in diameter;CONCLUSION: Apatite-wollastonite containing glass-ceramic (AWGC)with excellent bioactivity was developed by sol-gel process. The material is expected to be a good candidate for bone-repairing and bone tissue engineering scaffold materials.

Effect of non-specific HCN1 blocker CsCl on spatial learning and memory in mouse / 华中科技大学学报（医学）（英德文版）

It has been suggested that HCN1 is primarily expressed in hippocampus, however little is known about its effects on spatial learning and memory. In the present study, we investigated the effects of non-specific HCN1 blocker CsCl on spatial learning and memory by using Morris water maze and in situ hybridization in mice. The results showed CsCl 160 mg/kg ip for 4 days, and the mean escape latency was 34 s longer than that of normal control (P<0.01). In hippocampal tissues, staining for the HCN1 mRNA was stronger in the DG and CA1 region of the hippocampus (P <0.05, P<0.05, when CsCl-administration group was compared with normal group). Our results suggested that CsCl could significantly affect the spatial learning and memory in mice, and HCN channel is involved in the process of learning and memory.

Effect of Hypoxic Preconditioning on Neural Cell Apoptosis and Expression of Bcl-2 and Bax in Cerebral Ischemia-Reperfusion in Rats / 华中科技大学学报（医学）（英德文版）

In order to investigate the protective effect of hypoxic preconditioning on the cerebral ischemia-reperfusion injury, the expression of Bcl-2 and Bax was detected by using immunohistochemical staining after 3 h cerebral ischemia followed by 1, 6, 12, 24 and 48 h reperfusion respectively in rats treated with or without hypoxic preconditioning before cerebral ischemia. In addition,the apoptosis of neural cells and the behavioral scores for neurological functions recovery were evaluated by TUNEL staining and "crawvling method", respectively. Compared with control group (cerebral ischemia-reperfusion without hypoxic preconditioning), the expression of Bcl-2 was significantly increased, but that of Bax decreased in the hypoxic preconditioning group (cerebral ischemiareperfusion with hypoxic preconditioning), both P＜0. 05. The pre-treatment with hypoxic preconditioning could reduce the apoptosis of neural cells and promote the neurological function recovery as compared to control group. It was suggested that hypoxic preconditioning may have protective effects on the cerebral ischemia-reperfusion injury by inhibiting the apoptosis of neural cells, increase the expression of Bcl-2 and decrease the expression of Bax.

Mechanical environment of rotating bioreactor and its effect on cell growth / 生物医学工程学杂志

In this paper is presented an analysis of the mechanical effect of horizontal rotating bioreactor on cell culture. Getting the microgravity of the bioreactor and the shear stress on canine mesenchymal stem cells (cMSCs) with theoretic calculating model and differential equations, we have validated the density,growth rate and modality of cultured cell by scanning electron microscopy. The horizontal rotating bioreactor which we developed could create the mechanic environment of microgravity (K<8.38 X 10(-2))and low shear stress(r<1.62 dyn/cm2) in theory. The results of scanning electron microscopy indicated that the cells' growth-speed, quantity and modality in bioreactor were better than those of cells cultured in static 24-well plate. The mechanical environment of the rotating bioreactor is propitious for keeping better modality and more rapid proliferation of cMSCs. The rotating bioreactor is a novel approach and technique it is superior to static culture.

Growth and osteogenesis characteristics of cultured canine mesenchymal stem cells under osteogenic induction / 生物医学工程学杂志

To investigate the growth and osteogenesis characteristics of cultured canine mesenchymal stem cells (cMSCs) under osteogenic induction. We found the cMSCs were isolated from adult canine using density gradient separation method. The cMSCs attachment formed soon after seeding and grew into colonies with the appearance of fibroblastic cells. The osteogenic induction compound of Dexamethasone (Dex), beta-sodium glycerphosphate (beta-GP), ascorbic acid (AA) was added to passaged cMSCs and the proliferation and osteogenic differentiation of them was studied. The morphology of cells was observed by light micrograph and transmission electron microscope. The proliferation and growth characteristics of cMSCs were observed during primary and passage cultures through MTT. The differentiation were assayed by alkaline phophatase (ALP) and osteocalcin (OCN). We found the cMSCs have an active proliferative ability in primary and passage culture, and cMSCs under osteogenic induction have the typical characteristic of a secretory cell; the osteogenic induction compound may induce cMSCs to differentiate to osteoblasts. There are higher expression of ALP and OCN in passage 3 cMSCs under osteogenic induction than that of the osteoblasts osteogenic induction condition. Our research suggest the cMSCs in our culture system are mainly undifferentiated osteoprogenitors and can differentiate to osteoblast under osteogenic induction.

Effect of Non-specific HCN1 Blocker CsCl on Spatial Learning and Memory in Mouse / 华中科技大学学报（医学）（英德文版）

It has been suggested that HCN1 is primarily expressed in hippocampus, however little is known about its effects on spatial learning and memory. In the present study, we investigated the effects of non-specific HCN1 blocker CsCl on spatial learning and memory by using Morris water maze and in situ hybridization in mice. The results showed CsCl 160 mg/kg ip for 4 days, and the mean escape latency was 34 s longer than that of normal control (P＜0.01). In hippocampal tissues, staining for the HCN1 mRNA was stronger in the DG and CA1 region of the hippocampus (P ＜0.05, P＜0.05, when CsCl-administration group was compared with normal group). Our results suggested that CsCl could significantly affect the spatial learning and memory in mice, and HCN channel is involved in the process of learning and memory.

Analysis of Grey correlation between surface energy and adhesive characteristic of platelet for DLC / 生物医学工程学杂志

In this study, the diamond like carbon (DLC) samples made from different processes and processing conditions, were subjected to the test of platelet adhesion. The surface energy parameters such as surface tension, critical surface tension, interface tension, adhesive power, and polar branch and chromatic dispersion branch of surface tension based on determining balanced contact angle of ethanol, water and different ratios of ethanol/water solution on surfaces of the samples were calculated, respectively. Then the effects of these parameters on the amounts and deformation index of the platelets adhering to the samples were assessed by analyzing the T-type correlation degree in the Grey system. The results showed: (1) all degrees of correlation between surface energy parameters and adhesion amounts of platelet are positive, but for deformation index, the correlation degrees are negative except for critical surface tension; (2) the adhesion amounts of platelet increase with the rising polar branch of surface tension, while the deformation index increases with rising chromatic dispersion branch of surface tension; (3) Both adhesion amounts and deformation index of platelet are positively correlated with critical surface tension to a higher degrees; (4) the effects of polar branch of surface tension on adhesion amounts and deformation index of platelet keep pace with the surface tension, interface tension and adhesive power. Thus two important conclusions have been obtained: (1) the adhesive characteristic of platelets to the surface of DLC is closely related with the surface energy of DLC; the hemocompatibility of DLC is decided by the balance between the polarity of DLC surface and the limited humidifying water on the surface; there is a blood compatible range delimited by critical surface tension; (2) adhesion and deformation of platelets on surface of DLC have different energy mechanism: polar surface is advantageous to the adhesion, while the deformation is achieved with the aid of chromatic dispersion action stem from the surface.

Energy mechanism of effects of carbon phase components on hemocompatibility for DLC / 生物医学工程学杂志

The correlations between surface energy parameters and carbon phase components in six diamond like carbon film (DLC) samples made in different ways and processing conditions were further investigated using the analysis of T-type correlation degree in the Grey system theory based on our earlier studies such as the determination of carbon phase and surface energy parameters, the analyses of carbon phase components, surface energy parameters and adhesive characteristic of platelets for DLC. The results showed: (1) as a whole critical surface tension has the closest relation with carbon phase components, chromatic dispersion branch of surface tension takes the second place, but for the other four parameters, the correlation is weak; (2) DLC phase has larger negative correlation (degrees -0.57, -0.33) with critical surface tension and chromatic dispersion branch of surface tension, while its correlation degrees with the other four parameters related to polarity are all positive values smaller than 0.20; (3) C-H phase and C-O phase have larger positive correlation (degrees 0.48, 0.25) with critical surface tension. We have come to three conclusions (1) DLC phase plays a dominant part in hemocompatibilioty of DLC by powerfully decreasing humidification and limitedly increasing polarity; (2) the energy mechanism of platelet deformation enhanced by C-H phase and C-O phase involves increasing the critical surface tension of DLC; (3) the hemocompatibility of DLC can be evaluated by using the critical surface tension as index and using the content of DLC phase and additional content limitation of C-H phase and C-O phase as standard. This study has provided a theoretical basis for evaluating the hemocompatibility of DLC based on surface properties.

Research of osteoblast-induced rat mesenchymal stem cells cocultured with beta-TCP/PLLA composite of different ratio / 生物医学工程学杂志

There are three key factors in tissue engineering: seeding cells, scaffold and their interaction. Although mesenchymal stem cells (MSCs) are potential seeding cells, the problem of what phase MSCs should be used is not yet solved. On the other hand, degradable porous scaffolds which have good mechanics and good biocompatibility are preferred. To choose the optimum seeding cells and the suitable ratio of beta-TCP/PLLA porous scaffold, we observed the phenotype of the male SD rat's osteoblastic MSCs and detected the amount of alkaline phosphatase, osteocalcin and type I collagen secreted by the osteoblastic rMSCs in different phase. About 10, 14 and 20 days after induction, the induced cells came into proliferative phase, matrix synthesis phase and mineralization phase, respectively. Then we chose the suitable cells and seeded them on beta-TCP/PLLA composite scaffolds with different ratios (beta-TCP/PLLA = 1:1; beta-TCP/PLLA = 1:2; and beta-TCP/PLLA = 2:1). Fluorescence microscope, scanning electron microscope and MTT assay were used to observe and to detect the biocompatibility of the scaffolds. The results indicated that all of these materials have biocompatibility to some extent. Cells can grow well on all of the scaffolds. However, scaffold beta-TCP/PLLA = 2:1 seems to be a more suitable tissue engineering scaffold on account of its minimal influence on cell growth and differentiation.

Probe into the platelets adhesion to carbonaceous biomaterials / 生物医学工程学杂志

In order to clarify the mechanism of blood coagulation for carbonaceous biomaterials, the plasma rich in platelet was obtaining through the centrifugation of fresh human blood containing anticoagulant. Adhesive tests of platelets to surfaces of DLC, diamond film(DF) and graphite was carried out at 37 degrees C. Then, morphology observation, counting and deformation index calculation of the platelets adhering to surfaces of the three kinds of materials were analyzed by SEM. It has been shown that there is no any platelet on the surface of DLC, but on DF and graphite, a lot of platelets are observed with serious deformation of type III-V. The adhesive amounts of platelet on the surface of graphite are more than those on DF, but deformation index of platelets on the surface of DF is more than that on graphite. Three major conclusions have been obtained through comparative analyses with our previous researches and related literatures: (1) Adhesion, deformation and collection of platelets occurred in succession on material surfaces resulting from protein adsorption are the major mechanism of blood coagulation of carbonaceous materials; (2) Deformation degree of platelets is more important hemocompatibility index than consumption ratio of platelets for carbonaceous materials; (3) The purer the DLC, the better is the hemocompatibility. These conclusions possess important directive function for improving and designing carbonaceous materials used in artificial mechanical heart valves.

Analysis of correlation degree between phase components and adsorptive amounts of serum proteins for DLC film / 生物医学工程学杂志

In the present paper, the influence of carbon phase components of three kinds of diamond like carbon (DLC) films, viz. DLC, DLC rich in graphite and DLC rich in diamond films, on adsorption of human serum albumin (HSA), human serum fibrinogen (HFG) and immunoglobin (IgG) was quantitatively analyzed by use of T-type correlation degree in the grey system theory. Through the analysis, the rational explanation for adsorptive amounts variations of the serum proteins with phase components in the experiment is reached and some essential conclusions have been obtained: (1) The effect of graphite phase and C-H phase on HSA adsorption are greater than that of other phase components; with the increase of these two phase coumponents, the adsorptive amounts of HSA decrease; (2) The powerful influence on HFG adsorption stems from DLC phase and C-O phase; with the decrease of DLC phase or the increase of C-O phase, the adsorptive amounts of HFG increase; (3) All of the carbon phase components have only limited influence on IgG adsorption in positive or negative fashion with a little difference in degree; (4) DLC phase has both effects of enhancing adsorption for HSA and weakening adsorption for HFG and IgG, thus its influence on the hemocompatibility of DLC films is much more important than that of other phase components.

Effects of carbon phase components on platelets adhesion for diamond like carbon (DLC) / 生物医学工程学杂志

In the present paper, adhesive test, morphology observation, classified counting and deformation index calculation of the platelets on seven DLC samples made by different processes were carried out after XPS analysis, respectively. Then the effects of carbon phase components on amounts and deformation index of the platelets adhered to the samples were investigated by using the analysis of T-type correlation degree in the grey system theory. It has been shown from results that the amounts and the deformation index of the platelets adhered to the DLC samples made by plasma source ion implantation-ion beam enhanced deposition (PSII-IBED) are obviously less than those of DLC samples made by plasma CVD. The correlation degrees (negative) between the DLC carbon phase and the amounts as well as the deformation index of platelets are much more than those of the other four carbon phase components; besides, larger correlation degrees (positive) only appear between the deformation index of platelets and the C-H carbon phase or C-O carbon phase. It has been indicated that: (1) the effect of DLC carbon phase on platelets adhesion is much greater than that of the other four carbon phase components, the key to improvement in the hemocompatibility of DLC is to increase the DLC carbon phase content; (2) it is necessary to restrain the form or decrease the C-H carbon phase content and C-O carbon phase content so as to control their promotive action on deformation of the platelets adhered to the surface of DLC; (3) using PSII-IBED process to prepare DLC is helpful to improving the hemocompatibility of DLC. These conclusions are essential for designing and improving the deposition process of DLC.

Study on a new type of apatite/wollastonite porous bioactive glass-ceramic / 生物医学工程学杂志

A novel glass-ceramic has been derived from sol-gel process. In this study XRD and FTIR analysis confirmed that the main crystalline phases of the material were hydroxyapatite/fluoroapatite [Ca10(PO4)6(OH,F)] and beta-wollastonite[beta-CaSiO3]; SEM examination showed that the microstructure contained many micro pores of 2-3 microm. After pore-forming, the material possessed good macro porous structure: the size of macro pores was 300-400 microm in diameter, and pores interconnected each other. Bioactivity of the material was preliminarily evaluated in the simulate body fluid. SEM observation revealed that a lot of apatite granules had been formed on the surface of the material after soaking within 7 days. Result shows that the novel sol-gel derived apatite-wollastonite-containing glass-ceramic has good bioactivity. Porous materials have suitable microstructure as well as macrostructure, which make it an excellent material to be used as bone-repairing materials and bone tissue engineering carrier materials.

Effects of the variation in components of DLC on protein adsorption / 生物医学工程学杂志

Diamond-like carbon(DLC) was prepared by means of plasma source ion implantation-ion beam enhanced deposition. Through the heat treatment upon DLC in air and in depressed Ar gas, the DLC rich in graphite, DLC rich in diamond, and other kinds of DLC used in the study were obtained respectively. For the three kinds of DLC, the components of carbonaceous phase were analysed by X-ray photoelectron spectroscopy (XPS), the adsorptive amounts of human serum albumin (HSA), human serum fibrinogen (HFG) and human serum immunoglobin (IgG) on their surfaces in the condition of constant temperature were determined by radio isotope 125I labelling method. Results showed the graphite phase and diamond phase in DLC increased by two times or so respectively after the aforementioned different heat treatment. In pace with the increase of these foreign phases, the adsorptive amounts of HFG and IgG on DLC greatly increase but the adsorptive amounts of HSA on DLC decrease; furthermore, there is a change from non-selective adsorption of three human serum proteins into selective adsorptions of HFG and IgG prior to HSA. These results indicate that the foreign phases in DLC such as graphite, diamond, C-H phase and C-O phase have a great effect on protein adsorption on DLC and hence a negative effect on the hemocompatibility of DLC. The mechanisms for the increase of graphite phase and diamond phase in the process of heat treatment were also discussed in this paper.

On the correlation between the texture of contrast agent ultrasonic image and the intracardiac pressure / 生物医学工程学杂志

Based on the application of box-counting fractal model to the texture analysis of ultrasonic image after intravenous injection of Levovist acoustics contrast agent in a dog, this paper presents a method to calculate the fractal dimension(D) and assistant characteristic (C(L)) of the ultrasonic images of left ventricle. It was found that the D and C(L) changed regularly in the continued cardiac cycles, that is, the maximum value of D appears during diastasis, the minimum value appears during end-systole; as the ventricular systole begins, D changes from maximum to smallness, and as the diastole begins, D changes from smallness to maximum; the maximum value of C(L) appears around end-systole, the minimum value appears around diastasis; from the start of left ventricular systole to end-systole, C(l) shows a tendency to change from smallness to maximum, and from the start of diastole to diastasis, it shows a tendency to change from maximum to smallness. The changes of D and C(L) are very similar to the changes of left ventricular pressure. It is thus evident that there is correlation between the fractal texture characteristics of the contrast agent ultrasonic images and the changes of intracardiac pressure. The results demonstrate that it is possible to measure the intracardiac pressure noninvasively.

Component distribution in gradient biomaterial prepared with multi grades energy PIII / 生物医学工程学杂志

During the preparation of functional gradient materials (FGM) with plasma immersion ion implantation-ion beam enhanced deposition (PIII-IBED), the combination strength between the coating and the substrate would be greatly affected by the implantation dose and the distribution of implanted ions in substrate. According to the requirements of FGM, an idea of multi grades energy implantation had been suggested, with which the Gauss peak could be moved toward the surface, and the concentration of implanted ions could be maximized at the surface. In this study, the distribution of carbon ions implanted into titanic alloy substrate have been simulated theoretically, and the tentative idea have been confirmed experimentally.

Research and development of A-W bioactive glass ceramic / 生物医学工程学杂志

Studies on bioactive glass and glass-ceramic are important research high-lights in the field of biomedical materials. Due to their bioactivity, these materials can form a tight chemical bond with the living bone, when implanted. As a preeminent kind of these materials, A-W(Apatite/Wollastonite) bioactive glass ceramic has not only the excellent bioactivity and biocompatibility, but also the eminent mechanical properties, so it has been largely applied and developed in clinical practice. The development, preparation, properties, applications and the mechanism of its bond with bone are introduced in this paper. We will also put forward the prospect of the research and development of A-W bioactive glass ceramic.

In vitro release of tetracycline hydrochloride from alpha-TCP cement / 生物医学工程学杂志

Drug release from alpha-TCP cement containing tetracycline hydrochloride (TTCH) was studied in vitro. Results from X-ray diffraction study indicated that TTCH did not prevent the hydration of alpha-TCP. In vitro drug release study showed that TTCH release could sustain over 1200 h, and the release was controlled by two mechanisms: (1) diffusion of free TTCH molecules through the porous cement (square-root-of-time kinetics); (2) dissociation of TTCH from the apatite-TTCH complex (zero-order kinetics). The mechanism controlling release would changed with the variety of the antibiotic content of cement pellets, as a result of TTCH adsorption and bonding on calcium phosphates. The first mechanism was predominantly for low concentration system TTCH-loaded apatite cement systems at the initial release period, and for high concentration TTCH-loaded apatite cement systems. As for low concentration TTCH-loaded apatite cement systems at later release stage, drug release was controlled by the coupling of the two mechanisms.