Chemical constituents from leaves of Craibiodendron yunnanense / 中国中药杂志

The present study investigated the chemical constituents from the leaves of Craibiodendron yunnanense. The compounds were isolated and purified from the leaves of C. yunnanense by a combination of various chromatographic techniques including column chromatography over polyamide, silica gel, Sephadex LH-20, and reversed-phase HPLC. Their structures were identified by extensive spectroscopic analyses including MS and NMR data. As a result, 10 compounds, including melionoside F(1), meliosmaionol D(2), naringenin(3), quercetin-3-O-α-L-arabinopyranoside(4), epicatechin(5), quercetin-3'-glucoside(6), corbulain Ib(7), loliolide(8), asiatic acid(9), and ursolic acid(10), were isolated. Compounds 1 and 2 were two new compounds, and compound 7 was isolated from this genus for the first time. All compounds showed no significant cytotoxic activity by MTT assay.

Analysis of chemical constituents in Shenmai Injection by LC-Q-TOF-MS and LC-IT-MS / 中国中药杂志

The chemical constituents in Shenmai Injection(SMI) were qualitatively analyzed by using liquid chromatography/quadrupole time-of-flight mass spectrometry(LC-Q-TOF-MS) and liquid chromatography-ion trap-mass spectrometry(LC-IT-MS). The analysis was performed on an Agilent Zorbax SB-C_(18)(4.6 mm×250 mm, 5 μm) and gradient elution was carried out with 0.05% formic acid solution-acetonitrile as mobile phase at a flow rate of 0.6 mL·min~(-1) and a column temperature of 30 ℃. Mass spectrometry data of the components in SMI were collected in negative ion mode. The structures of components were speculated and identified by analyzing mass spectrometry data, comparing with standards, and referring to related literature. A total of 64 components in SMI were estimated, and the structures were confirmed in 16 of them by comparison with standards. Fifty-six compounds derived from Ginseng Radix et Rhizoma Rubra included 34 protopanaxadiol ginsenosides, 19 protopanaxatriol ginsenosides, 1 oleanane ginsenosides and 2 other glycosides. Eight compounds derived from Ophiopogonis Radix included 7 steroidal saponins, and 1 monoterpene glycoside. The results of this study would provide an important theoretical basis for the improvement of the quality control standards and the discovery of effective constituents in SMI.

Letter: Evaluating the Cumulative Impact of Ionizing Radiation Exposure With Diagnostic Genetics

No abstract available.

Rapid discovery and identification of the anti-inflammatory constituents in Zhi-Shi-Zhi-Zi-Chi-Tang / 中国天然药物

The anti-inflammatory active ingredients of Zhi-Shi-Zhi-Zi-Chi-Tang (ZSZZCT), a traditional Chinese medicine formula, were predicted and identified using an approach based on activity index, LC-MS, semi-preparative LC and NMR. Firstly, the whole extract of ZSZZCT was analyzed using liquid chromatography-quadrupole time of flight-mass spectrometry (LC-Q-TOF-MS) and liquid chromatography - ion trap mass spectrometry (LC-IT-MS), 79 constituents were detected and 39 constituents were identified unambiguously or tentatively. Subsequently, the whole extract of the formula was separated into multiple components and the activity index method was used to calculate index values of the 79 constituents by integrating the chemical and pharmacological information of multiple components. Four polymethoxyl flavones were predicted as the major active constituents according to the activity index values. Furthermore, three polymethoxyl flavones were prepared using the strategy with semi-preparative LC guided by LC-MS, and their anti-inflammatory activities were validated. The results show that three polymethoxyl flavones with higher positive index values, i.e., 3, 5, 6, 7, 8, 3', 4'-heptamethoxyflavone, 3-hydroxynobiletein and tangeretin had significant anti-inflammatory effects. In conclusion, the predicted results indicated that the activity index method is feasible for the accurate prediction of active constituents in TCM formulae.

Study on active constituents from Glycyrrhizae Radix et Rhizoma against NO production in LPS-induced RAW264.7 macrophages / 中草药

Objective: To study the anti-inflammatory constituents in Glycyrrhizae Radix et Rhizoma. Methods: The compounds were isolated and purified by means of macroporous resin, ODS column chromatography, and semi-preparative HPLC. And their structures were identified by LC-MS, 1H-NMR, and 13C-NMR. The anti-inflammatory activities of the compounds were evaluated on LPS-induced NO production in RAW 264.7 macrophages. Results: Their structures were identified as liquiritin (1), liquiritin apioside (2), isoliquiritin (3), isoliquiritin apioside (4), sophoraisoflavone A (5), glyasperin F (6), glabrone (7), glabridin (8), licoflavonol (9), and glyasperin D (10). Conclusion: Compounds 1, 3, 5, 6, 8, and 9 could inhibit NO production in RAW 264.7 macrophages to some extent. And the anti-inflammatory effects of compounds 5, 6, and 9 are first reported in this work.

Treatment of ipsilateral femoral neck and shaft fractures / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To investigate the clinical characteristics, treatment options and causes of misdiagnosis of ipsilateral femoral neck and shaft fractures.</p><p><b>METHODS</b>Among 20 patients with ipsilateral femoral neck and shaft fractures, 19 were treated operatively and 1 was treated conservatively. Sixteen cases of femoral shaft fractures were treated by open reduction and internal fixation with compressive plate, and 2 cases were treated with interlocking intramedullary nailing. Eighteen femoral neck fractures were treated with cannulated screws. Another patient was treated with proximal femoral nail to fix both the neck and shaft. Delayed diagnosis for femoral neck fractures occurred in 2 cases preoperatively.</p><p><b>RESULTS</b>A total of 19 patients were followed up. The follow up period ranged from 5 to 48 months with an average of 15 months. All the fractures were healed.</p><p><b>CONCLUSION</b>For case of femoral shaft fracture caused by high energy injury, an AP pelvic film should be routinely taken. Once the femoral neck fracture is recognized, operative reduction and fixation should be performed in time. Femoral neck and shaft fractures should be fixed separately.</p>

Treatment of nonunions of humeral fractures with interlocking intramedullary nailing / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To introduce the experience of treating nonunions of humeral fractures with interlocking intramedullary nailing.</p><p><b>METHODS</b>Twelve patients with humeral nonunions were treated with interlocking intramedullary nailing. The time interval between trauma and surgery was 10.5 months on average. Open reduction with anterograde approach was performed. Axial compression was specially applied to the fracture site with humeral nail holder after insertion of distal locked screws. Iliac bone grafting was added.</p><p><b>RESULTS</b>The average follow-up period was 21 months (ranging 9-51 months). All patients achieved osseous union 5.8 months after treatment on average. Eleven patients had good functions of the shoulder joints and the upper extremities. No patient experienced any permanent neurological deficit. Refracture of the original ununited region occurred in one patient after removal of the internal fixator one year later, but union was achieved after closed re-intramedullary nailing fixation.</p><p><b>CONCLUSION</b>Humeral interlocking intramedullary nailing is an effective alternative treatment for humeral nonunion.</p>

Impact of mechanical stress and tension-stress on angiogenesis in wound healing / 中华创伤杂志(英文版)

Angiogenesis plays a fundamental role in the development of the embryonic vascular tree as well as in several normal and pathologic conditions during postnatal life. Blood supply, established by neovascularization, is imperative for histogenesis during wound healing as well as the limb lengthening applied extensively in the treatment of skeletal trauma sequalae. But little attention has been paid to this area. This review aims to summarize angiogenesis regulation, the process of angiogenesis in wound healing and angiogenesis under mechanical stress, particularly in association with the tension-stress principle.

A new custom-made artificial articular cartilage of femoral condyle based on rapid prototyping technique: a case report / 中华外科杂志

<p><b>OBJECTIVE</b>To design and manufacture a new custom-made artificial articular cartilage of femoral condyle based on rapid prototyping technique and explore a method to solve the necroses of allocartilage in hemi joint allotransplantation.</p><p><b>METHODS</b>Design the new custom-made artificial articular cartilage of femoral condyle. The allograft and the patient distal femurs were scanned with Picker 6000 spiral computed tomography (CT) with 1.0 slice thickness and pitch of 1.5, reconstructed the distal femurs in Voxel Q image workstation with volume rendering technique. Then downloaded the transaxial 2D image data to personal computer at 0.1 mm interval and converted it into 2D digitized contour data by using image processing software developed by our team. The 3D wire frame and solid images of femoral condyle could be reconstructed when the 2D digitized contour data were input into image processing software Surfacer 9.0 (Imageware Company, USA). Subsequently based on the clinical experience and the need of design, the 3D contour image of articular cartilage was extracted from the surrounding. Based on the extracted 3D contour image, the computer-aided design (CAD) of the custom-made artificial articular cartilage was accomplished in Surfacer software, converted the CAD model into RP data format. Standard triangularization language, imported into the LPS600 rapid prototyping machine (Hengtong Company, Xi'an Jiaotong University, China), and the resin prototype was achieved. Then the resin model was used as a positive mould to build up a silica gel negative mould, the negative mould was sent to the factory to manufacture Ti-6Al-4V alloy articular cartilage through ordinary mould-melted founding process. Finally, the whole metal cartilage was completed after melting two special cages on it. A patient was selected to clinical applying.</p><p><b>RESULTS</b>A new custom-made artificial articular cartilage of femoral condyle was made. It was press-fit well to the subchondral bone of the allograft bone. The patient's one and half year follow-up result was excellent.</p><p><b>CONCLUSIONS</b>We design and manufacture a new custom-made artificial articular cartilage of femoral condyle based on rapid prototyping technique. The result shows that the manufacturing process has the advantage of rapidness and precision that are very important for individualized artificial implant manufacturing. The artificial articular cartilage is press-fit well and could be a good idea to solve the necroses of allocartilage in hemijoint allotransplantation.</p>

Treatment of tibial defect and bone nonunion with limb shortening with external fixator and reconstituted bone xenograft / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To explore the effect of external fixator and reconstituted bone xenograft (RBX) in the treatment of tibial bone defect, tibial bone nonunion and congenital pseudarthrosis of the tibia with limb shortening.</p><p><b>METHODS</b>Twenty patients (13 males and 7 females) with tibial bone defect, tibial bone nonunion or congenital pseudarthrosis of the tibia with limb shortening were treated with external fixation. Two kinds of external fixators were used: a half ring sulcated external fixator used in 13 patients and a combined external fixator in 7 patients. Foot-drop was corrected at the same time with external fixation in 4 patients. The shortened length of the tibia was in the range of 2-9 cm, with an average of 4.8 cm. For bone grafting, RBX was used in 12 patients, autogenous ilium was used in 3 patients and autogenous fibula was implanted as a bone plug into the medullary canal in 1 case, and no bone graft was used in 4 patients.</p><p><b>RESULTS</b>All the 20 patients were followed-up for 8 months to 7 years, averaging 51 months. Satisfactory function of the affected extremities was obtained. All the shortened extremities were lengthened to the expected length. For all the lengthening area and the fracture sites, bone union was obtained at the last. The average healing time of 12 patients treated with RBX was 4.8 months.</p><p><b>CONCLUSIONS</b>Both the half ring sulcated external fixator and the combined external fixator have the advantages of small trauma, simple operation, elastic fixation without stress shielding and non-limitation from local soft tissue conditions, and there is satisfactory functional recovery of affected extremities in the treatment of tibial bone defects, tibial bone nonunion and congenital pseudarthrosis of the tibia combined with limb shortening. RBX has good biocompatibility and does not cause immunological rejections. It can also be safely used in treatment of bone nonunion and has reliable effect to promote bone healing.</p>