Progress and prospect of biological treatment for rotator cuff injury repair / 中国修复重建外科杂志

OBJECTIVE@#To review the research progress in biotherapy of rotator cuff injury in recent years, in order to provide help for clinical decision-making of rotator cuff injury treatment.@*METHODS@#The literature related to biotherapy of rotator cuff injury at home and abroad in recent years was widely reviewed, and the mechanism and efficacy of biotherapy for rotator cuff injury were summarized from the aspects of platelet-rich plasma (PRP), growth factors, stem cells, and exosomes.@*RESULTS@#In order to relieve patients' pain, improve upper limb function, and improve quality of life, the treatment of rotator cuff injury experienced an important change from conservative treatment to open surgery to arthroscopic rotator cuff repair. Arthroscopic rotator cuff repair plus a variety of biotherapy methods have become the mainstream of clinical treatment. All kinds of biotherapy methods have ideal mid- and long-term effectiveness in the repair of rotator cuff injury. The biotherapy method to promote the healing of rotator cuff injury is controversial and needs to be further studied.@*CONCLUSION@#All kinds of biotherapy methods show a good effect on the repair of rotator cuff injury. It will be an important research direction to further develop new biotherapy technology and verify its effectiveness.

The accuracy of bony resection and component size planning of total knee arthroplasty assisted with a novel designed patient-specific instrumentation / 中华骨科杂志

Objective:To investigate the accuracy of bony resection and component size planning of total knee arthroplasty (TKA) assisted with a novel designed patient-specific instrumentation (PSI).Methods:Thirty-eight TKAs assisted with a novel designed PSI of thirty-five patients from March 2018 to April 2019 were retrospectively analyzed. There were 11 males (10 knees) and 27 females (25 knees), aged 67.7±6.9 years (range 49-81 years). Intraoperative bone resection thicknesses at medial distal femur (MDF), lateral distal femur (LDF), medial posterior femur (MPF), lateral posterior femur (LPF), anterior femur (AF), medial tibial (MT), lateral tibial (LT) were measured with vernier caliper and compared with the preoperative planned bone resections as a primary outcome. The femur and tribal component sizes used intraoperatively were recorded and compared the preoperative planning.Results:The difference of thickness was -0.1±1.6 mm at MDF, -0.5±1.6 mm at LDF, 0.8±1.7 mm at MPF, 0.0±1.7 mm at LPF, 0.0±1.4 mm at AF, -0.3±1.4 mm at MT and 0.3±1.5 mm at LT. The ratio of differences <2 mm and <3mm were 87.8% and 93.94% at MDF, 87.8% and 93.94% at LDF, 71.3% and 85.71% at MPF, 77.14% and 91.43% at LPF, 88.46% and 100% at AF, 85.29% and 97.06% at MT, 83.78% and 94.59% at LT. 89.47% of femoral components were the same size with preoperative planning, 10.53% femoral components were within 0.5 size compared to the preoperative planning, no femoral components were over 0.5 size compared to the preoperative planning; 36.84% of tibial components were the same size with preoperative planning, 60.53% tibial components were within 0.5 size compared to the preoperative planning, 2.63% tibial components were within 1 size compared to the preoperative planning, notibial components were over 1 size compared to the preoperative planning.Conclusion:TKA assisted with a novel designed PSI shows good accuracy with bone resection and component size planning. The procedure of TKA could be simplified with this technique.

Numerical study on the effect of the geometry size of multi-chamber infusion bag on its bursting force / 生物医学工程学杂志

This study explored the variation of bursting force of multi-chamber infusion bag with different geometry size, providing guidance for its optimal design. Models of single-chamber infusion bag with different size were established. The finite element based on fluid cavity method was adopted to calculate the fluid-solid coupling deformation process of infusion bag to obtain corresponding critical bursting force. As a result, we proposed an empirical formula predicting the critical bursting force of one chamber infusion bag with specified geometry size. Besides, a theoretical analysis, which determines the force condition of three chamber infusion bag when falling from high altitude, was conducted. The proportion of force loaded on different chamber was gained. The results indicated that critical bursting force is positively related to the length and width of the chamber, and negatively related to the height of the chamber. While the infusion bag falling, the impact force loaded on each chamber is proportional to the total liquid within it. To raise the critical bursting force of in fusion bag, a greater length and width corresponding to reduced height are recommended considering the volume of liquid needed to be filled in.

Finite element method simulating bursting process of multi-chamber flexible package infusion bag / 生物医学工程学杂志

This study aims to overcome the shortcomings such as low efficiency, high cost and difficult to carry out multi-parameter research, which limited the optimization of infusion bag configuration and manufacture technique by experiment method. We put forward a fluid cavity based finite element method, and it could be used to simulate the stress distribution and deformation process of infusion bag under external load. In this paper, numerical models of infusion bag with different sizes was built, and the fluid-solid coupling deformation process was calculated using the fluid cavity method in software ABAQUS subject to the same boundary conditions with the burst test. The peeling strength which was obtained from the peeling adhesion test was used as failure criterion. The calculated resultant force which makes the computed peeling stress reach the peeling strength was compared with experiment data, and the stress distribution was analyzed compared with the rupture process of burst test. The results showed that considering the errors caused by the difference of weak welding and eccentric load, the flow cavity based finite element method can accurately model the stress distribution and deformation process of infusion bag. It could be useful for the optimization of multi chamber infusion bag configuration and manufacture technique, leading to cost reduction and study efficiency improvement.

Prior HIV testing and determinants among student men who have sex with men in Guangzhou / 中国学校卫生

Objective@#To understand prevalence and determinants of prior HIV testing among male students who have sex with men (MSM) in Guangzhou,and to provide a reference for improving their HIV set.@*Methods@#Students who were MSM were recruited in Guangzhou from May 2017 to April 2018. Data on socio-demographic characteristics, sexual behavior, AIDS prevention service access and HIV testing history were collected. Multivariate non-conditional logistic regression was conducted to explore determinants with HIV testing.@*Results@#The median age of 223 students who were MSM was 22 years old (interquartile: 20-23). About 65.47% (146/223) of them had a history of HIV testing. Multivariate non-conditional logistic regression showed individuals who sought sexual partners online (OR=3.24, 95%CI=1.32-7.98), had anal sex in the last 6 months (OR=2.73, 95%CI=1.26-5.93), and had received AIDS prevention services(OR=2.87, 95%CI=1.51-5.34) were more likely to have a history of HIV testing. @*Conclusion@#Prior HIV testing among student MSM in Guangzhou was relatively low. Intervention should be tailored targeting student MSM who seek sexual partners offline, have only oral sex in the past 6 months, and receive no AIDS prevention services in the past year to expand the coverage of HIV testing.

Effect of cyr61 on proliferation and differentiation of hepatic progenitor cells / 实用医学杂志

Objective To investigate the regeneration and differentiation of HOCs in the 2-AAF/PHx rat models. To explore the expression of Cyr61and its mechanism in differentiation of HOCs in vitro. Methods In 2-AAF/PHx rats model,induction and expansion of HOCs were detected by immunochemistry and HE staining. West-ern blot was used for observing the expression of Cyr61. Furthermore,the expression of Cyr61 andβ-catenin were detected by Western blot in differentiation of WB-F344 cells in vitro. Results Cyr61 protein level increased as a re-sult of HOCs in rats livers after 2-AAF/PHx. In addition,the expression of Cyr61 and β-catenin significantly in-creased during WB-F344 cells differentiation in vitro. Conclusions Cyr61 might play an important role as a signal-ing mediator in HOCs response and closely correlate with Cyr61 andβ-catenin in proliferation and differentiation of HOCs.

Experimental research of type Ⅱ collagen composite glycosaminoglycan scaffold in hUCMSCs chondrogenic induction / 重庆医学

Objective To investigate the chondrogenic feasibility of the human umbilical cord derived mesenchymal stem cells (hUCMSCs)as cartilage tissue engineering seed cells ,type Ⅱ collagen composite glycosaminoglycan scaffold as the cellular carrier and cell‐scaffold complex .Methods The type Ⅱ collagen composite glycosaminoglycan scaffolds was prepared .The pore diameter , porosity and hydrophilia of scaffold materials were observed and measured by electronic microscope .The corresponding histological analysis on the scaffold materials was performed .hUCMSCs of P3 generation were cultured and identified .The hUCMSCs suspen‐sion was inoculated in the type Ⅱ collagen composite glycosaminoglycan scaffold for conducting culture without adding inducer .The samples were taken out after 3 weeks and performed the toluidine blue and safranin O staining ,type Ⅱ collagen immunohistochemi‐cal staining and SEM scanning .Results hUCMSCs of P3 generation highly expressed the mesenchymal cell marker CD29 and CD105 ,while hardly expressed endothelial cells of CD34 and hematopoietic cell markers .The type Ⅱ collagen composite glycosami‐noglycan scaffold presented white porous foam like ,the porosity was (91 .8 ± 2 .17)% ,the average pore diameter was 110‐230 μm , which was homogeneously distributed and had interpenetration .The scaffold showed good hydrophilicity with the water absorption expansion rate of (213 .71 ± 1 .31)% .The scaffold staining of toluidine blue ,safranin O and type Ⅱ collagen was positive .The car‐tilage‐like tissues were observed ,and gradually increased in the surface of cell‐scaffold complex along with culture ,which were posi‐tive in Toluidine blue ,safranin O and type Ⅱ collagen staining ,the electronic microscopic observation displayed that the cells were actively proliferated in the scaffold ,closely adhered with the materials ,the cartilage‐like cells and a large number of peripheral colla‐gen fibers with zigzag connection could be seen .Conclusion Compositing hUCMSCs and type Ⅱ collagen composite glycosamin‐oglycan scaffold could construct tissue‐engineering cartilage in vitro without induction ,which lays a certain experimental foundation for the repair of cartilage damage .

Effects of superparamagnetic iron-oxide particles-labeling on the multi-diffentiation of rabbit marrow mesenchymal stem cell in vitro / 生物医学工程学杂志

The aim of this study was to label rabbit bone derived mesenchymal stem cells (BMSCs) with superparamagnetic iron oxide particles (SPIO) and to study the effects of magnetic labeling on the multi-differentiation of BMSCs. Rabbit BMSCs were isolated, purified, expanded, then coincubated with SPIO(25 microg/ml) complexed to protamine sulfate (Pro) transfection agents overnight. Prussian blue staining and transmission electron microscopy were performed to show intracellular iron. Cell differentiation was evaluated. Both labeled and unlabeled BMSCs were subjected to osteogenic, adipogenic and chondrogenic differentiation to assess their differentiation capacity for 21 d. Osteogenic cells were stained with alizarin red to reveal calcium deposition, adipogenic cells were stained with oil redO' respectively. Chondrogenic cells stained with Safranin-O, glycosamino glycans, and type II collagen production was assessed by standard immunohistochemistry. Cell with immunohistochemistry staining were detected by polarized light microscopy and analysed by Image-Pro Plus software. The results showed that intracytoplasmic nanoparticles were stained with Prussian blue and observed by transmission electron microscopy clearly except the unlabeled control. As compared with the nonlabeled cells, it showed no statistically significant difference on the differentiation of the labeled BMSCs. And the differentiation of the labeled cells were unaffected by the endosomal incorporation of SPIO. In summary, BMSCs can be labeled with SPIO without significant change in cell multi-differentiation capacity.

Research of endothelial cells induced from rabbit marrow mononuelear cells in vitro / 中国矫形外科杂志

[Objective]To research the efficient way of isolating and proliferating of induced endothelial cells(ECs) ,measure the number of the ECs and observe the main biological characteristic of ECs m vitro during the passage cultivation.[Method]The marrow mononuclear cells(MNCs) in rabbit marrow were isolated by the gradiem centrifugation and cultivated to isolate and induce ECs. The efficiency of isolating and harvesting ECs was measured by the number of the first passage ECs from every 10~6 of the MNCs. The changes of ECs morphology, growth and proliferation were observed during the passage cultivation. The immunohistochemical staining of CD31 and vWF and function of ECs were checked.[Result]After cultivated at 1?10~6/cm~2 MNCs for 7～8 d, the first passage ECs were harvested. The number of the first and the second passage ECs had a remarkable statistical positive correlation with the number of the MNCs from one rabbit. After cultivated for 7～8 d, the first passage ECs of 7.086?0.75?10~4 in number and the second passage ECs of 53.20?6.47?10~4 in number were harvested from every 10~6 MNCs on average;ECs, which were monolayer arrayed to form cobblelike shape,The cells of 2nd passage showed positive staining of CD31 and vWF, and positive labeling of DiI-LDL and UEA.[Conclusion]The period from cultivating to harvesting ECs is shortened at the density of 1?10~6/cm~2 MNCs. It is feasible that the efficiency of isolating and harvesting ECs could be measured by the number of the first or the second passage ECs from every 10~6 MNCs. The induced ECs can act as seeding cells in bone tissue engineering in future.

The statistical analysis about the scientific papers embodied by MEDLINE DATABASE in Nanjing General Hospital from 1996 to 2005 / 医学研究生学报

Objective:Through statistical analysis the situation of Nanjing General Hospital scientific research articles to be embodied by the international authority retrieval tool,appraises the hospital scientific research level and the academic status,provides the basis for the hospital administratives in the development of medical department and the training of talent aspect. Methods:With the aid of the MEDLINE retrieval method,analyzes all the Nanjing General Hospital scientific research ariticles,the number of articles in Chinese or foreign language and their distributed situation in the domestic and foreign periodicals from 1996 to 2005.Results:The articles embodied in near five-year show increased year by year,especially for the English articles.But the rank from first to fifth periodicals were published in China, and the number of articles in Chinese was beyond it in foreign language. Conclusion:The results show the international communication and the articles in English are value more and more in Nanjing General Hospital.But it is need to increased the number of articles in the external periodicals,especially the periodical be embodied by 《SCI》.They will advance the development the academic status and scientific research level in the hospital.

Construction and development of digital resources of hospital library / 医学研究生学报

Objective:TO introduces the construction of digital resources in medical library of Nanjing General Hospital of Nanjing Command, PLA. Methods and results:How to utilize digital resources in the library through local area network and how to utilize PLA medical library through Internet.To achieve the full utilization of digital resource in library. Conclusion:The management and serve of digital resources is the direction of digital resources development of hospital library.

Practice and analysis for the construction of compound medical library / 医学研究生学报

Objective: To raise the all-round informational level through analyzing the necessity of constructing compound medical library.Methods: Through aiming at the fundamental characters of compound medical library,so as to carry out the practices of theoretical researches,the development and optimization of network environments,the integration of informational resources,the enhancement and innovation of information service quality.Results: To provide some helpful references from the traditional to the compound state.Conclusion: Constructing compound medical library by combining the traditional with the digital base is the only way to accelerate the development of medical library.

Practice and expeoration of digital hospital library / 医学研究生学报

It is an inevitable development tendency to build medical digital libraries. Our practice and results of digitalization of medical libraries explains the goal and idea of the construction of medical digital libraries.

The new thought on foreign periodials booking in the hos pital libraries during the new period / 医学研究生学报

The author analyses the chance and challenge of foreign periodicals booking in hospital libraries following China entering WTO and under the network environment,and proposes some effective solutions.