Effect of subpatellar artery balloon molding on diabetic foot ulcer caused by arterial ischemia / 中国医师杂志

Objective:To explore the feasibility and efficacy of subpatellar artery balloon molding in the treatment of diabetic foot ulcer caused by arterial ischemia.Methods:The clinical data of patients with diabetic foot ulcer caused by subpatellar artery disease treated in Xuanwu Hospital of Capital Medical University from December 2020 to April 2022 were retrospectively analyzed. Among them, 29 patients received medical balloon dilatation (drug balloon group) and 30 patients received balloon dilatation alone (simple balloon group). The improvement of lower limb ischemia at 3 and 6 months after surgery was analyzed in the two groups. The observation indicators included case-fatality rate, limb preservation rate, ulcer healing, Rutherford grading and pain score.Results:There was no significant difference in preoperative Rutherford grading between the two groups ( P>0.05). Three and six months after operation, the Rutherford grading in both groups was significantly improved compared with that before surgery (all P<0.05), and there was no statistical significance between the two groups ( P>0.05). There was no significant difference in preoperative pain scores between the two groups ( P>0.05). The pain scores of both groups were significantly decreased 3 and 6 months after surgery ( P<0.05), and there was no statistical significance between the two groups ( P>0.05). Three and six months after surgery, the wound ulcer healing rate in the drug balloon group was higher than that in the simple balloon group [51.7%(15/29) vs 43.3%(13/30), P=0.519; 86.2%(25/29) vs 50.0%(15/30), P=0.002]. There was no death or amputation in the two groups 3 and 6 months after surgery. Conclusions:Balloon dilatation can improve severe limb ischemia of diabetic foot. Compared with balloon dilatation alone, drug balloon dilatation is more beneficial to the healing of ulcer wounds in diabetic limb ischemia patients.

Advances in the application of finite element method in the study of spine biomechanics / 国际外科学杂志

Finite element method (FEM) is a method to decompose a large complex problem into several small problems to solve it. With this method, multiple small elements can be used to simulate the real physical system, which greatly promotes the development of biomechanics. Biomechanics has always been a hot research direction in spine surgery, and the finite element method is also widely used in spine biomechanics. It can simulate the healthy spine on the computer and study the stress of normal spine in various states, so as to provide help for the study of basic stress of spine.It can simulate the spinal column of pathological changes and degenerative changes, and study its stress in various scenarios, so as to provide direction for the treatment of diseases. Different surgical methods can be simulated to study the stress of the spine and internal fixation after different surgical methods, so as to select the best surgical method for patients; At the same time, it can also simulate different implants and study the stress of different implants in vivo and in vitro, so as to provide guidance for the selection of intraoperative implants and the upgrading and optimization of implants.This paper mainly discusses the application and progress of finite element method in spine surgery, and provides more references for the future study of spine biomechanics and clinical treatment of spine surgery.

The Influence of Technology Innovation Investment on Financial Performance of Pharmaceutical Enterprises Based on Threshold Effect / 中国药房

OBJECTIVE： To provi de reference for relevant departments to formulate innovation subsidy policies for pharmaceutical enterprises and enterprises to make their own business strategy decisions. METHODS ：The listed enterprises in China ’s pharmaceutical industry listed before 2012 were selected as the sample enterprises. The annual reports of listed enterprises in pharmaceutical industry and related panel data in CSMAR database during 2012-2019 were colected. Referring to related literatures ， multivariate regression model and threshold model were established to investigate the effects of technology innovation investment ability of sample enterprises ，so as to put forward relevant suggestions. RESULTS & CONCLUSIONS ：A total of 57 sample enterprises were included. The panel data of sample enterprises showed that the technology innovation investment of Chinese pharmaceutical enterprises was basically increasing year by year ，but compared with international standards ，the technology innovation investment of Chinese pharmaceutical enterprises still needed to be improved. The results of multiple regression model showed that the technology innovation investment of pharmaceutical enterprises had no significant impact on their current financial performance and the financial performance of the first and second lags （P＞0.05）. The results of threshold model showed that there was a significant single threshold effect between technology innovation investment and financial performance when enterprise size was taken as the threshold variable （P＜0.05）. When the enterprise size was less than the threshold value of 20.986，the enterprise ’s technology innovation investment had a negative impact on its financial performance （P＜0.05）；when the enterprise size was greater than the threshold value of 20.986，the correlation between the enterprise ’s technology innovation investment and financial performance was not significant （P＜0.05）. It is suggested that China ’s pharmaceutical enterprises should carry out technology innovation activities according to their own strength ，and enterprise managers should formulate different innovation development strategies according to the ac tual situation ，enable enterprises to maintain a reasonable capital structure by broadening financing channels ，identify innovation points according to their own ability ，reduce costs and risks ，and innovate R&D modes，so as to promote the transformation and effective utilization of R&D achievements. Government departments should give full play to the guiding role ，encourage pharmaceutical enterprises to maintain the vitality of R&D and innovation and guide the sustainable innovation and healthy development of the pharmaceutical industry.

Study on Preparation ，Characterization and Magnetism of Magnetic Graphene Oxide Modified by Folic Acid / 中国药房

OBJECTIVE： To prepare Magnetic graphene oxide modified by folic acid （FA-GO-Fe3O4）， and to characterize it and study its magnetism. METHODS： Using graphene oxide （GO）， ferric chloride hexahydrate and ferrous chloride tetrahydrate as raw material， magnetic graphene oxide （GO-Fe3O4） was synthesized by hydrothermal coprecipitation method. FA-GO-Fe3O4 was obtained by linking amido bond to folic acid. GO， GO-Fe3O4 and FA-GO-Fe3O4 were characterized by scanning electron microscopy， infrared spectroscopy， X-ray diffraction （XRD） and particle size and Zeta potential analyzer respectively. Zeta potential was measured. The magnetism of FA-GO-Fe3O4 were investigated by the action of external magnetic field and hysteresis loop. RESULTS： Compared with GO and GO-Fe3O4， scanning electron microscopy and XRD showed that the structure of GO destroyed in the synthesis of FA-GO-Fe3O4， and there were particles attached on the surface， and amorphous phase peaks between 15 ° and 30 °. Infrared spectroscopy showed that FA-GO-Fe3O4 had absorption peaks at 574 cm－1 and 1 640 cm－1， which belonged to the characteristic absorption of Fe-O and —CONH— respectively. Zeta potentials of GO， GO-Fe3O4 and FA-GO-Fe3O4 were －24， 5.62 and －22.7 mV， respectively. FA-GO-Fe3O4 had obvious magnetism under external magnetic field， and its saturation magnetization was about 20-25 emu/g under room temperature and applied positive and negative magnetic fields. CONCLUSIONS： FA-GO-Fe3O4 prepared in this study has superparamagnetism and is more stable than GO-Fe3O4.

Clinical value of fluorescence in situ hybridization positive of exfoliated urothelial cells in urothelial carcinoma / 北京大学学报(医学版)

Objective: To analyze the clinical pathologic characteristics of cases with fluorescence in situ hybridization (FISH) positive of exfoliated urothelial cells, so as to evaluate the clinical utility of FISH in the diagnosis of urothelial carcinoma (UC).Methods: A total of 271 cases of FISH positive in Department of Urology of Peking University First Hospital from Apr.2012 to Sep.2015 were recruited in this study.Retrospective analysis was made on their clinical data.For FISH analysis, labeled probes specific for chromosomes 3, 7, 17, and the p16 (9p21) gene were used to assess chromosomal abnormalities indicative of malignancy.The positive predict values (PPV) of all the techniques were analyzed.Results: Of the 271 patients, 207 cases were UC, 7 cases were non-UC, and 57 cases were benign diseases.The PPV of FISH in detecting UC was 76.4%, while the 95% confidence interval (CI) 71.3% to 81.5%.In the cohort of FISH positive, this value was similar to that of urinary cytology (PPV 86.8%, 95% CI: 78.5%-95.0%).The PPV of FISH was lower than that of cystoscopy and ureteroscopy (PPV 96.1%, 95% CI: 91.7%-100.0%).There were significant differences between this study and the PPV of FISH reported abroad (PPV 53.9%, χ2=33.048, P<0.001).Of all the UC with FISH positive, bladder cancer showed an earlier pathological stage versus renal pelvic carcinoma and ureteral carcinoma, with significance (χ2=5.894, P=0.015, and χ2=13.601, P<0.001, respectively).However, no difference was found in the size, pathological stage and pathological grade of tumors between the urinary cytology positive group and the urinary cytology negative group.The rate of high-grade UC in ureteral carcinoma of FISH positive was 92.3%, much higher than that of ureteral carcinoma reported domestically.Conclusion: The PPV of FISH in detecting UC is higher relatively, with a better clinic value for Chinese patients.The ureteral carcinoma with FISH positive obtains a higher pathological grade, which is of great guiding significance for UC.

Study on the Bone-length Measurement, Bone-proportional Measurement, and Body-length Measurement in Acupoints Location and Their Relations / 上海针灸杂志

The accurate location of acupoints is the prerequisite for the efficacy of acupuncture-moxibustion. Bone-length measurement, bone-proportional measurement, and proportional unit of the body measurement are commonly used in clinic for acupoints location. Based on the systematic review of the ancient literatures, this article discussed the meaning, evolution and relations of bone-length measurement, bone-proportional measurement, and proportional unit of the body measurement. It’s concluded that the bone-length measurement should be a benchmark in ancient anthropometry and an important basis for acupoints location. Bone proportional measurement, used in different genders, ages and body sizes, was based on the relatively stable proportional relations of various body parts, though some of the standards were adjusted in accordance with the correlation between meridians and acupoints. Location of points by proportional unit of the body simplified the application of bone-length measurement and bone proportional measurement, based on the ratio between short and long bones or the ratio of same body parts in anthropometry. However, proportional unit of the body measurement should be applied for the specific body parts. Bone-length measurement, bone-proportional measurement, and proportional unit of the body measurement are correspondingly the benchmark measurement, relative measurement, and simplified measurement.

Research on matrix proteoglycan turnover of tissue engineering repaired cartilage / 西安交通大学学报(医学版)

Objective To examine matrix proteoglycan metabolic markers and probe into the turnover of matrix proteoglycan and enzyme-mediated role of matrix metalloproteinases (MMPs) and aggrecanases in reparative tissues with tissue engineering cartilage. Methods Tissue-engineered cartilage was constructed by cancellous bone matrix gelatin (BMG) with allogeneic chondrocytes in vitro for 2 weeks, then implanted to repair osteochondral defects of rabbit knee joint. Samples were obtained 6 months later to explore the expressions of 3-B-3(-) epitope, MMPs, MMP-generated epitope BC-4 and aggrecanases-generated epitope BC-13. Results In repaired tissues, the expression of 3-B-3(-) epitope increased, but that of MMPs and MMP-generated epitope BC-4 reduced. There was no expression of aggrecanases-generated epitope BC-13. Conclusion Expressions of 3-B-3(-), MMPs, BC-4 and BC-13 can help probe into the matrix proteoglycan turnover in reparative cartilage tissues. Anabolism exceeds catabolism in the repaired tissues. MMPs play an important role in the conservative baseline turnover of proteoglycan and remodeling of the graft tissues.

Biotransformation of podophyllotoxin by cell suspension and root culture systems of Rheum palmatum / 中草药

Objective To investigate the biotransformation of podophyllotoxin by cell suspension culture and root culture systems of Rheum palmatum.Methods Plant tissue culture technology was employed.The products were isolated by silica gel column chromatography and their structures were elucidated by spectral methods.Results Adding of podophyllotoxin had no obvious effects on the pH value of cell suspension culture and root culture systems of R.palmatum.In the case of present study,73.8% of podophyllotoxin was converted by cell suspension culture and 56.3% by root culture.The products were different between the two culture system.Podophyllotoxin was converted into picropodophyllin with cell suspension culture system and many other products besides epipodophyllotoxin with root culture system.Conclusion Both of cell suspension culture and root culture systems of R.palmatum are able to convert podophyllotoxin.