Gestational weight gain is an important risk factor for excessive fetal growth

OBJECTIVE: To estimate the odds ratio of prepregnant body mass index (BMI), gestational weight gain (GWG), and gestational diabetes mellitus (GDM) for excessive fetal growth, which we define as large for gestational age (LGA). METHODS: We included 16,297 women who delivered a live-born singleton baby at term. We fit logistic regressions to estimate the odds ratios of variables, including maternal age, parity, prepregnant BMI > or =23, GWG > or =15 kg, and GDM, for LGA. We classified GWG into four categories ( or =20 kg) and BMI into four categories (underweight, normal, overweight, and obese). After adjusting for age and parity, we analyzed the odds ratios of prepregnant BMI according to GWG between non-GDM and GDM women for LGA. RESULTS: The odds ratios of GWG > or =15 kg and prepregnancy BMI > or =23 for LGA were 2.40 (95% confidence interval [CI], 2.16-2.67) and 2.24 (95% CI, 1.99-2.51), respectively. The odd ratio of GDM was 1.37 (95% CI, 1.09-1.71). The risk of GDM women with normal/-overweight BMI and GWG or =15 kg might be a more important risk factor for LGA than either prepregnancy BMI > or =23 or GDM. Risk for LGA was highest in obese GDM women with GWG > or =15 kg.

Surface analyses of titanium substrate modified by anodization and nanoscale Ca-P deposition / 대한치과보철학회지

STATEMENT OF PROBLEM: Nano-scale calcium-phosphate coating on the anodizing titanium surface using ion beam-assisted deposition (IBAD) has been recently introduced to improve the early osseointegration. However, not much is known about their surface characteristics that have influence on tissue-implant interaction. PURPOSE. This study was aimed to investigate microtopography, surface roughness, surface composition, and wettability of the titanium surface modified by the anodic oxidation and calcium phosphate coating using IBAD. MATERIAL AND METHODS: Commercially pure titanium disks were used as substrates. The experiment was composed of four groups. Group MA surfaces represented machined surface. Group AN was anodized surface. Group CaP/AN was anodic oxidized and calcium phosphate coated surfaces. Group SLA surfaces were sandblasted and acid etched surfaces. The prepared titanium discs were examined as follows. The surface morphology of the discs was examined using SEM. The surface roughness was measured by a confocal laser scanning microscope. Phase components were analyzed using thin-film x-ray diffraction. Wettability analyses were performed by contact angle measurement with distilled water, formamide, bromonaphtalene and surface free energy calculation. RESULTS: (1) The four groups showed specific microtopography respectively. Anodized and calcium phosphate coated specimens showed multiple micropores and tiny homogeneously distributed crystalline particles (2) The order of surface roughness values were, from the lowest to the highest, machined group, anodized group, anodized and calcium phosphate deposited group, and sandblasted and acid etched group. (3) Anodized and calcium phosphate deposited group was found to have titanium and titanium anatase oxides and exhibited calcium phosphorous crystalline structures. (4) Surface wettability was increased in the order of calcium phosphate deposited group, machined group, anodized group, sandblasted and acid etched group. CONCLUSION: After ion beam-assisted deposition on anodized titanium, the microporous structure remained on the surface and many small calcium phosphorous crystals were formed on the porous surface. Nanoscale calcium phosphorous deposition induced roughness on the microporous surface but hydrophobicity was increased.

The analysis of prognostic factors in patients with epithelial ovarian cancer / 대한산부인과학회지

OBJECTIVE: To determine pathologic variables associated with overall survival and disease free survival of patients with epithelial ovarian cancer. METHODS: Diesease free survival and overall survival of 80 ovarian cancer patients treated with primary surgery between January 1997 and December 2003 at our center were compared about various histopathologic variables. Survival analyses were performed by the Kaplan-Meier curves and the log-rank test. Independent prognostic factors were determined by Cox's proportional hazards model. RESULTS: With regard to disease free survival, univariate analysis revealed no significant differences in subgroups according to age category, histologic type and grade. However, significant differences in disease free survival were found in stage category and residual tumor volume. Among these significant subgroups, the Cox-proportional hazards model showed that residual tumor volume was the only independent prognostic factor. There were significant differences in the overall survival of patients in subgroups according to stage categoty and residual tumor volume. Multivariate analysis revealed that residual tumor volume was the only independent significant adverse prognostic factor. CONCLUSION: Our results showed that only residual tumor volume was the independent prognostic factor of disease free survival and overall survival in epithelial ovarian cancer patients.

A study on the responses of osteoblasts to various surface-treated titanium / 대한치과보철학회지

STATEMENT OF PROBLEM: The long-term success of implants is the development of a stable direct connection between bone and implant surface, which must be structural and functional. To improve a direct implant fixation to the bone, various strategies have been developed focusing on the surface of materials. Among them, altering the surface properties can modify cellular responses such as cell adhesion, cell motility and bone deposition. PURPOSE: This study was to evaluate the cellular behaviors on the surface-modified titanium by morphological observation, cellular proliferation and differentiation. MATERIAL AND METHODS: Specimens were divided into five groups, depending on their surface treatment: electropolishing(EP) anodizing(AN), machining(MA), blasting with hydroxyapatite particle(RBM) and electrical discharge machining(EDM). Physicochemical properties and microstructures of the specimens were examined and the responses of osteoblast-like cells were investigated. The microtopography of specimens was observed by scanning electron microscopy(SEM). Surface roughness was measured by a three-dimensional roughness measuring system. The microstructure was analyzed by X-ray diffractometer(XRD) and scanning auger electron microscopy(AES). To evaluate cellular responses to modified titanium surfaces, osteoblasts isolated from neonatal rat were cultured. The cellular morphology and total protein amounts of osteoblast-like cell were taken as the marker for cellular proliferation, while the expression of alkaline phosphatase was used as the early differentiation marker for osteoblast. In addition, the type I collagen production was determined to be a reliable indicator of bone matrix synthesis. RESULTS: 1. Each prepared specimen showed specific microtopography at SEM examination. The RBM group had a rough and irregular pattern with reticulated appearance. The EDM-treated surface had evident cracks and was heterogeneous consisting of broad sheet or plate with smooth edges and clusters of small grains, deep pores or craters. 2. Surface roughness values were, from the lowest to the highest, electropolished group, anodized group, machined group, RBM group and EDM group. 3. All groups showed amorphous structures. Especially anodized group was found to have increased surface oxide thickness and EDM group had titaniumcarbide(TiC) structure. 4. Cells on electropolished, anodized and machined surfaces developed flattened cell shape and cells on RBM appeared spherical and EDM showed both. After 14 days, the cells cultured from all groups were formed to be confluent and exhibited multilayer proliferation, often overlapped or stratified. 5. Total protein amounts were formed to be quite similar among all the group at 48 hours. At 14 days, the electropolished group and the anodized group induced more total protein amount than the RBM group(P<.05). 6. There was no significant difference among five groups for alkaline phosphatase(ALP) activity at 48 hours. The AN group showed significantly higher ALP activity than any other groups at 14 days(P<.05). 7. All the groups showed similar collagen synthesis except the EDM group. The amount of collagen on the electropolished and anodized surfaces were higher than that on the EDM surface(P<.05).

Need Assessment for Stage of Behavior Change in Workplace Health Promotion Strategy / 대한산업의학회지

OBJECTIVES: In order to evaluate the stage of behavior change for health promotion strategy in workplace METHODS: Questionnaire survey was carried out for 309 workers who employed in H Electronics company in Kyongin area from September to October 1998. RESULTS: According to need assessment of four step such as precontemplation stage, contemplation stage, action stage, maintenance stage which were to change of behavior for health promotion, the percent for quitting smoking were observed 48.8%, 43.1%, 8.1%. 0 %, and for the restriction of drinking were 29.8%, 10.6%, 9.3%, 5.3%; for fitness 11.1%, 31.0%, 37.3%, 20.6% in male 26.6%, 27.8%, 26.6%, 19.0% in female, for regular diet 26.1%, 19.8%, 38.7%, 15.3% in male, 27.8%, 22.2%, 40.0%, 10.0 % in female and for stress management 5.8%, 10.6%, 8.7%, 75.0% in male, 13.6%. 22.7%, 19.7%, 44.0% in female. In heavy smoker (p=0.017) and heavy drinker, (p=0.021) the percent of precontemplation stage was significantly higher than in lower drinker and light smoker. CONCLUSIONS: This study suggested that company support for health promotion in workplace was weak and workers of high risk group for smoking and drinking were in precontemplation stage. So before conducting the health promotion program, health risk appraisal and need assessment for stage of behavior change should be taken for the efficient heath promotion strategy.