Research on quality standards of standard decoction of Fructus Corni piece / 中国中药杂志

This study aims to develop the quality standards of Fructus Corni piece standard decoction. Morroniside and loganin were considered as index components. The content determination method of morroniside and loganin were developed. The fingerprint analysis method was also established. The standard decoctions of 15 batches of Fructus Corni pieces from Henan, Zhejiang, and Shaanxi were analyzed. The similarity values of fingerprint were all above 0.99. The transfer rates of morroniside were all higher than 100%. The quality evaluation indices of standard decoction were discussed. The transfer rate of an index component was not easy to be measured accurately and its concept was not rigorous. Therefore, index component yield was suggested as an evaluation index of standard decoction. Two methods for setting quality standards of standard decoctions, which were the ■ method and the ■ method, were compared. It was found that the standard range of ■ method was wider and more suitable for smaller sample size of standard decoction. The quality standards of Fructus Corni standard decoction were as follows, dry matter extraction ratio 37.48%-69.60%; morroniside yield 8.719-16.19 mg·g~(-1) piece; loganin yield 4.342-8.064 mg·g~(-1) piece.

Quantitative chromatographic fingerprint analysis of Sanye Tangzhiqing Decoction based on quality by design concept / 中国中药杂志

In this work,a high performance liquid chromatography-ultraviolet( HPLC-UV) detection technology was used to establish fingerprint analysis method for Sanye Tangzhiqing Decoction following an analytical quality by design( AQb D) approach. Firstly,column temperature,flow rate,and gradient elution conditions were determined as the method parameters needing to be optimized. Then according to the results of definitive screening design,three critical method attributes( CMAs) were identified,including peak number,the percentage of common peak area to total peak area,and retention time of the last peak. A stepwise regression method was used then to build quantitative models between CMAs and method parameters. Probability-based design space was calculated and successfully verified using the experimental error simulation method. After the analysis conditions were optimized,the contents of six components,namely chlorogenic acid,paeoniflorin,rutin,hyperoside,quercetin-3-O-β-D-glucuronide,and salvianolic acid B were simultaneously determined. There were 19 common peaks in the fingerprint and their common peak area accounted for 96% of the total peak area. Both fingerprint and quantitative analysis methods were validated applicable in methodology study,and they can be applied to determine new samples.