RESUMO
Aiming to solve the poor compactibility of the alcoholic extract of Zingiberis Rhizoma(ZR), this study explored the feasibility of its physical modification using co-spray drying with a small amount of hydroxypropyl methyl cellulose(HPMC). Based on the univariate analysis, the influence of two independent variables(the HPMC content in the product and the solid content of spray material) on the powder properties and tablet properties of the dried product was investigated by the central composite design. With the tensile strength and disintegration time of the tablets as the evaluation indexes, the optimal prescription was determined as follows: the HPMC content was 15% and the solid content of spray material was 25.6%. The accuracy of the regression model established for predicting tensile strength and disintegration time of tablets was verified, and the results revealed that the measured values were close to the predicted ones with deviations of 0.47% and-8.2%, indicating good prediction and reproducibility of the model. The tensile strength(4.24 MPa) of tablets prepared with the optimal prescription was 3.59 times that(1.18 MPa, far lower than the baseline of 2 MPa for qualified tablets) with the spray-dried powder of the ZR. On the other hand, due to the addition of HPMC, the disintegration time of tablets increased from 7.3 min to 24.6 min. On the whole, this study provided a new strategy to solve the common problem of poor compactibility of raw Chinese medicinal materials, which facilitated the successful preparation of Chinese medicinal tablets with high drug loads.