A simple method for the determination of bioethanol from lignocellulosic materials using gas chromatography-flame ionisation detector (GC-FID)

Aims@#The utilisation of lignocellulosic biomass for bioethanol production reduces the dependency on fossil fuels as a source of energy and emission of greenhouse gas (GHG). However, studies in this emerging field are hampered by the cost of ethanol quantification methods. Due to the volatile nature of ethanol, the method for the quantification of bioethanol production should be reproducible and rapid to avoid any evaporation loss to the surroundings. Therefore, this study aimed to develop a simple, rapid and precise bioethanol quantification method using a gas chromatographyflame ionisation detector (GC-FID) without having to go through distillation process for ethanol purification.@*Methodology and results@#The bioethanol was produced via consolidated bioprocessing (CBP) using Trichoderma asperellum B1581 and paddy straw. The peak corresponding to ethanol was obtained at 2.347 min with a peak area of 189.66, equating to 0.159% (v/v) or 1.25 g/L ethanol. A comparison between the quantity of ethanol detected by GC-FID and spectrophotometric analysis (340 nm) showed no significant difference (p>0.05) in the amount of ethanol detected by GC analysis, thus validating the accuracy of the GC method.@*Conclusion, significance and impact of study@#This work presents a simple, precise and reliable method to determine the amount of bioethanol in the sample using a GC-FID. Currently, there are many GC-FID methods available for the determination of ethanol/alcohol in a human blood samples or in beverages but not in bioethanol samples. Thus, this method was developed to facilitate the determination of bioethanol in the samples produced from lignocellulosic materials.

Screening of lignocellulolytic fungi for hydrolyzation of lignocellulosic materials in paddy straw for bioethanol production

Aims@#Paddy straw is known to have lignocellulosic materials such as cellulose and hemicellulose which can be readily converted into fermentable sugar for production of bioethanol via simultaneous saccharification and fermentation (SSF). In order to produce ethanol competently, the degradation of biomass by cellulase and highly ethanol-producing microorganism in fermentation process are necessarily needed. However, there is lacking in cellulose degrading organism in producing adequate amount of lignocellulosic enzyme. Therefore, the screening and selection for the best fungi to hydrolyze the lignocellulosic materials as well as forming consortium between two species of fungi has become the main focus. @*Methodology and results@#Thirteen strains of fast-growing fungi were tested qualitatively for cellulase (congo red staining) and polyphenol oxidase (Bavendamm test). All tested strains displayed lignocellulolytic fungi characteristics. The selection was narrowed down by quantitative assay on endoglucanase, exoglucanase, β-glucosidase and xylanase and the highest cellulases enzyme producer were Trichoderma asperellum B1581 (3.93 U/mL endoglucanase; 2.37 U/mL exoglucanase; 3.00 IU/mL β-glucosidase; 54.87 U/mL xylanase), followed by Aspergillus niger B2484 (5.60 U/mL endoglucanase; 1.08 U/mL exoglucanase; 1.57 IU/mL β-glucosidase; 56.85 U/mL xylanase). In compatibility test, both T. asperellum B1581 and A. niger B2484 were inoculated on the same Petri dish for 4 days and the interaction showed by the two species was mutual intermingling. @*Conclusions, significance and impact of study@#Both T. asperellum B1581 and A. niger B2484 produced the highest cellulase enzyme. Since both strains can co-exist and produce enzymes that complete each other, a fungal consortium was suggested to increase the yield of sugars in saccharification process.