RESUMO
This study was undertaken to study the effects of different amounts of kiln dust mixed with soil on the seed germination, plant growth, leaf area and water content of Vicia faba cv. Eresen. The reason for this was that cement kiln dust generated as a by-product from the cement factories is rich in potassium, sulfate and other compounds. This product becomes a serious problem when it comes in contact with water. The dust was collected from a cement factory located in Çanakkale. Various elements such as Al, Co, Mo, Ca, B, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, S, Se and Zn were determined both in soil as well as kiln dust. Kiln dust was mixed with soil in pots (20 cm diameter) to make seven different treatments varying from 15 to 105 g kiln dust kg-1 of soil. The experiment lasted for 4 months. Seeds of V. faba were sown in the pots filled with mixtures of preanalysed kiln dust and soil. Germination was high in the pots with a lower treatment of cement kiln dust. However, lower germination rates were observed in the pots mixed with the highest and the medium amounts of cement kiln dust. Plants growing in the soil including 15 g kiln dust showed better performance in length as compared to control. Leaf area increased with increase in cement kiln dust content up to 60 g kiln dust kg-1 of soil, but declined after 75 g kg-1. Water content of leaves (mg cm-2 leaf area) was found to be constantly decreasing with respect to increasing cement kiln content in the pots. Differences between the averages were evaluated by Tukey test and results were found to be significant.
RESUMO
The Blackstone River, a 74 km interstate stream located in South Central Massachusetts and Rhode Island (USA), has had a long history of problems due to high concentrations of metals such as copper and lead. The river has been subjected to metals load that include contributions from urban runoff, wastewater discharges, contaminated sediments, and also resuspension of contaminated sediments in the river-bed. All of these effects lead to elevated concentrations of metals such as lead, copper, zinc, chromium, cadmium and arsenic. Furthermore, the contaminated sediments located behind impoundments become especially important when higher flows cause resuspension of the previously deposited sediments and associated metals. While it is known that high metals concentrations in this river are found in the bottom sediments, the fate of the metals and impact on the ecosystem are not well known. This paper addresses the potential impacts that metals may have on vegetation and plant tissues in the vicinity of the river Plant tissues (primarily mosses), were collected from a number of sampling sites along a 14 km stretch of this river. At each site, samples were collected from multiple distances from the riverbank. Laboratory analyses made use of both wet digestion and dry ashing digestion methods, followed by analysis using an atomic absorption spectrophotometer. The wet and dry ashing digestion methods yielded similar results, although the results afforded by the dry ashing methods were slightly lower than the results obtained from the wet method. The results showed that the metals concentrations in vegetation (as determined from plant tissue analyses) were generally inversely related to the distance between the vegetation and the riverbank, with higher metals concentrations existing in plant tissues located close to the riverbank. In addition, it was found that the transport of metals concentrations to the terrestrial vegetation adjacent to this section of the Blackstone River was affected by the river morphology and flow characteristics (including velocity, flow rate and depth of flow, which can govern the potential for plant submergence, as well as the dynamics of flow and transport in the soil near the river). The analyses help to provide an improved understanding of metals transport and potential significance of metals contamination in a terrestrial ecosystem that is located adjacent to a river.