Marginal and internal fit of zirconia copings obtained using different digital scanning methods

Abstract The objective of this study was to evaluate the marginal and internal fit of zirconia copings obtained with different digital scanning methods. A human mandibular first molar was set in a typodont with its adjacent and antagonist teeth and prepared for an all-ceramic crown. Digital impressions were made using an intraoral scanner (3Shape). Polyvinyl siloxane impressions and Type IV gypsum models were also obtained and scanned with a benchtop laboratory scanner (3Shape D700). Ten zirconia copings were fabricated for each group using CAD-CAM technology. The marginal and internal fit of the zirconia copings was assessed by the silicone replica technique. Four sections of each replica were obtained, and each section was evaluated at four points: marginal gap (MG), axial wall (AW), axio-occlusal edge (AO) and centro-occlusal wall (CO), using an image analyzing software. The data were submitted to one-way ANOVA and Tukey's test (α = 0.05). They showed statistically significant differences for MG, AO and CO. Regarding MG, intraoral scanning showed lower gap values, whereas gypsum model scanning showed higher gap values. Regarding AO and CO, intraoral digital scanning showed lower gap values. Polyvinyl siloxane impression scanning and gypsum model scanning showed higher gap values and were statistically similar. It can be concluded that intraoral digital scanning provided a lower mean gap value, in comparison with conventional impressions and gypsum casts scanned with a standard benchtop laboratory scanner.

Apicoectomy after conventional endodontic treatment failure: case report

Introduction: Paraendodontic surgery is a safe and adequate alternative when teeth are not responding to conventional treatment and endodontic re-treatment. It must only be applied in specific situations. Endodontic treatment failures can be related to: extraradicular infections such as periapical actinomycosis; to foreign body reactions that can be caused by endodontic material extrusion; to endogenous cholesterol crystal accumulation in apical tissues; and unresolved cystic lesion. Paraendodontic surgery comprehends a set of procedures recommended in periapical diseases treatment, when traditional endodontic therapy does not obtain favorable outcomes. Objective: To report a clinical case where an apicoectomy was indicated due to failure in conventional endodontic treatment. Case report and Conclusion: Clinical case report of a tooth with unsatisfying conventional endodontic treatment history, due to lack of treatment in fourth root canal and an unsuccessful apicoectomy, since the lesion and the fistula had persisted. It was chosen to retreat tooth #26 and perform a new apicoectomy in the mesiobuccal root. The treatment was successful due to absence of fistula and painful symptoms and due to periapical bone repair.