RESUMO
Objective:To report the application of our self-made Kirschner wire connecting rod combined with a conventional intramedullary nail extractor in difficult extraction of intramedullary devices.Methods:From January 2012 to August 2017, 10 patients with a hard-to-remove intramedullary device were treated at Department of Orthopaedics, The Fifth Hospital Affiliated to Xinjiang Medical University. They were 7 males and 3 females with a mean age of (40.0±9.0) years. In cases where no relevant extractor was available for the intramedullary device or it was impossible to connect the extractor connecting rod to the tail of the intramedullary device, the Kirschner wire was bent and pulled through the screw hole or the hole newly drilled at the tail of the intramedullary device to be tied or fixed with a conventional extractor connecting rod to form an effective connection. Next, our self-made Kirschner wire connecting rod was used to pull out the intramedullary device. In this cohort, 7 intramedullary nails in the tibia, 1 femoral intramedullary nail, 1 humeral intramedullary nail, and 1 tibial elastic nail were removed. The difficult extraction was due to "cold welding" of the tail cap of the intramedullary nail in 3 cases, mismatch between the screw rod of the extractor and the tail screw hole of the intramedullary nail in 4 cases, and unavailability of relevant removal tools in 3 cases. The time for intramedullary device removal, blood loss and postoperative adverse reactions were recorded.Results:Of this cohort, 9 patients underwent simple removal of the intramedullary device and 1 patient replacement of the intramedullary device. The total time for removal of an intramedullary device was (2.3±0.8) h, ranging from 1.0 to 3.2 h. The amount of blood loss was (159.0±61.0) mL, ranging from 80 to 250 mL. The follow-up was (14.5±2.2) months, ranging from 11 to 18 months. There was no infection or fracture associated with implant removal.Conclusion:Application of our self-made Kirschner wire connecting rod in combination with a conventional intramedullary nail extractor is an easy operation to successfully extract hard-to-remove intramedullary implants, requiring no more special instruments.
RESUMO
Objective:To investigate the clinical effect of posterior fossa decompression combined with dural reconstruction in the treatment of Chiari malformation-Ⅰ(CM-Ⅰ) complicated with syringomyelia (SM).Methods:The clinical data of 50 patients with CM-Ⅰ complicated with SM who were treated in Yan′an University Xianyang Hospital from June 2019 to January 2021 were analyzed. They were divided into the study group (27 cases) and the control group (23 cases) according to the surgical methods. The former received posterior fossa decompression combined with dural reconstruction, while the latter received posterior fossa decompression alone. The clinical symptom improvement, neurological function, cerebrospinal fluid dynamics and syringomyelia changes were compared between the two groups before and after the surgery, and postoperative complications were compared.Results:The overall clinical symptom improvement rate between the two groups had no significant difference ( P> 0.05). After the surgery, the scores of pain, sensory disturbance, dyskinesia and ataxia in the study group were higher than those in the control group: (4.56 ± 0.35) points vs. (4.28 ± 0.43) points, (3.61 ± 0.82) points vs. (3.15 ± 0.73) points, (3.81 ± 0.44) points vs. (3.59 ± 0.50) points, (4.43 ± 0.41) points vs. (4.09 ± 0.53) points, there were statistical significant ( P<0.05). After the surgery, the cerebrospinal fluid stroke volume (SV) and mean flow (MF) in the study group were higher than those in the control group: (0.05 ± 0.02) ml vs. (0.04 ± 0.01) ml, (0.05 ± 0.01) ml/s vs. (0.04 ± 0.01) ml/s; the maximum peak flow velocity (V max) of the head and tail in the study group were lower than those in the control group: (3.14 ± 1.05) mm/s vs. (3.87 ± 1.13) mm/s, (5.56 ± 1.38) mm/s vs. (6.43 ± 1.22) mm/s, there were statistical significant ( P<0.05). There were no significant differences in the rate of reduction or disappearance of syringomyelia, the rate of no change and the rate of increase of syringomyelia after the surgery between the two groups ( P>0.05). There was no significant difference in the incidence of postoperative complications between the two groups ( P>0.05). Conclusions:Posterior fossa decompression combined with dural reconstruction in CM-Ⅰ complicated with SM can better improve cerebrospinal fluid dynamics, and promote the reduction of syringomyelia without increasing postoperative complications.
RESUMO
Objective:To prospectively analyze the early clinical effects of 3D-printed porous metal cup with hip dual-mobility revision (HDR) system in treating severe acetabular bone defects.Methods:A total of 17 patients with severe acetabular defects (15 patients in Allan-Gross type 4 and 2 patients in type 5; 2 patients in Paprosky type 2B, 4 patients in type 3A and 11 patients in type 3B) who underwent revision hip arthroplasty between July 2019 and May 2020 were analyzed. There were 7 males and 10 females (mean age 67.3±9.3 years; range 42-80 years). The average body mass index was 22.2±3.8 kg/m 2 (range 17.7-33.3 kg/m 2). The preoperative mean leg length discrepancy (LLD) was 42.9±31.1 mm (range 10-160 mm) . One patient presented positive Trendelenburg sign. The follow-up duration was 12.1±3.0 months (range 6-16 months). The clinical and radiographic hip scores in all patients were evaluated. Results:The mean Harris Hip Score (HHS) was 31.2±11.3 points at preoperatively, 63.5±10.0, 68.7±10.4 and 70.2±10.1 points at 3 days, 7 days and 1 month postoperatively. At the latest follow-up, HHS was increased to 81.6±7.0 points. The outer cup mean abduction angle was 48.1°±10.6° and the mean inclination angle was 10.8°±6.0° postoperatively. The inner cup mean abduction angle was 45.0°±6.2° and the mean inclination angle was 10.8°±3.7°. The mean LLD decreased to 11.1±3.8 mm (range: 0-15 mm) after surgery. At the latest follow-up, all acetabular components were radiologically stable without displacement. No osteolysis or absorption was observed. There was no infection, loosening or nerve injury in all cases.Conclusion:During short-term follow-up, the 3D-printed porous metal HDR system can effectively enhance the stability of implants with satisfied quality of life. It can provide a good result for the revision of total hip arthroplasty with severe acetabular defects.
RESUMO
BACKGROUND:Surgical treatment for pigmented vil onodular synovitis can maximize the excision of synovial lesions and recovery of joint function. OBJECTIVE:To investigate the knee joint function and relapse rate fol owing treatment of pigmented vil onodular synovitis with total knee replacement and arthroscopic synovectomy. METHODS:We retrospectively analyzed 34 cases of knee pigmented vil onodular synovitis admitted for surgical treatment in the Department of Orthopedics, Xiangya Hospital of Central South University, China from December 2006 to December 2011. In these cases, 24 patients received arthroscopic synovectomy and 10 patients were subjected to total knee replacement. Adjuvant radiotherapy was conducted according to postoperative patient’s conditions. Lysholm scoring was employed in the arthroscopic synovectomy group, and American Knee Society scoring was used in the total knee replacement group. Knee function in two groups was compared before and after treatment. Fol ow-up observation was performed to compare knee function recovery and relapse rate between two groups. RESULTS AND CONCLUSION:Thirty-four patients were effectively fol owed up for 12-66 months, mean 41.3 months. Statistical analysis showed that in the arthroscopic synovectomy group, the postoperative Lysholm score was (86.3± 10.3) points, significantly higher than the preoperative score which was (55.5±13.2) points (t=3.81, P=0.016, P<0.05). In the total knee arthroplasty group, the American Knee Society score was increased from (40.7±2.2) points preoperatively to (90.2±1.1) points postoperatively (t=6.27, P<0.01). In the arthroscopic synovectomy group, the American Knee Society score was increased from (34.2±3.9) points preoperatively to (80.8±1.9) points postoperatively (t=16.58, P<0.01). Arthroscopic synovectomy combined with adjuvant radiotherapy can achieve better outcomes in pigmented vil onodular synovitis patients, while the total knee replacement for advanced with advanced knee diffuse pigmented vil onodular synovitis is better to restore knee function and the recurrence rate is low.