RESUMO
Objective:To explore the auxiliary 3D rapid prototyping technology of adult penis virtual surgery simulation on the basis of the force feedback, thus to improve the success rate of surgery, to reduce complications and to ensure the operation safety and reliability.Methods:Twenty cases of Inner Mongolia adult male (20-50 years old) were selected from January 2009 to December 2015 in the Department of Burns and Plastic Surgery, Inner Mongolia Medical University Affiliated Hospital. The two-dimensional CT data from the iliac crest edge to edge of penis continuously were input into the computer to reconstruct 3D penis and adjacent structure model using Magics Rapid-prototyping software. Under the Free Form system, digital virtual simulation reconstructive surgery was carried out based on force feedback device for adult penis.Results:Using Free Form system, virtual plastic and reconstructive surgery was carried on the adult penis, which could be used for penis optional operation, the three dimensional model for quantitative operation design to choose the best surgical approach. This technique provided a new technical means to avoid complications happened.Conclusions:Penis RP model can accurately reflect the complex anatomical characteristics and the internal space of the area adjacent to the relationship, based on force feedback, make the performer from the visual, auditory and tactile perception to simulate procedures for accurate adult penile reconstructive surgery and to improve clinical application value.
RESUMO
Objective:To construct a surface model of penis and adjacent structures with clear anatomical features by using the three-dimensional laser scanning technology and to explore the application value in the three-dimensional reconstruction of adult penis soft tissue.Methods:Sixty cases of healthy male subjects (25 to 28 years old) were chosen from January to December 2019 from Inner Mongolia region in Inner Mongolia Medical University Hospital; subjects were divided into 3D digital model measurement and manual measurement groups, each 30 cases. 3D digital model group was measured with 3D laser scanning for adult penis and adjacent to the structure of three-dimensional digital model of the related software on the penis morphological measurement. The results of the manual measurement group was compared with those of the 3D digital model group.Results:The model obtained by 3D laser scanning could rotate and scale smoothly, observe the penis and adjacent structure from any angle, conduct simulation operation, and complete measurement quickly and accurately, with no significant difference between the 3D digital model and manual measurement results.Conclusions:3D laser scanning technology is a simple, accurate and efficient method for soft tissue reconstruction and non-contact measurement of adult penis. The measurement results are completely reliable, and the measurement error conforms to the requirements of anthropometry, providing an important morphological data source for clinical penile plastic surgery.
RESUMO
Objective To explore the morphologic features of the biceps reflection pulley through the comparative study of the thin sec -tional anatomy based on the Chinese Visible Human ( CVH) and MRI sectional anatomy of the biceps reflection pulley ,and to provide ima-ging anatomic data for the diagnosis of lesions .Methods The thin slices of sagittal oblique plane and coronal oblique plane by visualization -al reconstruction based on 5 data set of the Chinese visible human ( CVH) were compared with the corresponding MR images from 20 shoulder joints of the normal volunteer individuals with routine MRI ,5 shoulders without abnormalities with MR arthrography .The detailed sectional a-natomy structure of the the biceps reflection pulley was marked from the CVH ,routine MRI and MR arthrography one by one with Photoshop CS2 software.Results The main three components of the biceps reflection pulley including the coracohumeral ligament (CHL),the superior glenohumeral ligament ( SGHL) ,and the long head of the biceps tendon ( LBT) were markedly displayed on the CVH and MRI .The CHL was markedly displayed on the sagittal oblique , using plain MRI .The SGHL was markedly displayed on the CVH , especially in the transverse plane.The LBT was markedly displayed on the CVH ,especially in the coronal oblique plane parallel to the LBT .The biceps reflection pulley was markedly displayed on the sagittal oblique plane with CVH and MR arthrography .The SGHL was perpendicular to the CHL , with T-shaped link anterior to the LBT on the sagittal oblique plane .Conclusion It is complementary for MRI and CVH displaying the components of the biceps reflection pulley .The sagittal oblique plane is the best position for displaying the components and adjacent structures of the bi -ceps reflection pulley ,which provide helpful position mark for the diagnosis of the lesions in the rotator interval .
RESUMO
Objective To evaluate the diagnosis of frozen shoulder with the coracohumeral ligament on the coronal oblique plane with MRI.Methods There were 60 patients(120 shoulder joints)in control group,with 30 males and 30 females,the mean age was 50.5 years old.There were 72 shoulder joints in 72 patients of frozen shoulder group(50 femles and 22 males with a mean age of 53.5 years)with clini-cal evidence and MR imaging evidence of frozen shoulder.These were prospectively analyzed to identify the CHL visualization rate and meas-ure the maximum thickness of the CHL.Results The CHL visualization rate on the coronal oblique plane in the control group was 86.7%(104 /120),and the frozen shoulder group was 87.5%(63 /72),the difference was not significant(P >0.05).The CHL visualization rate on the axial view in the frozen shoulder group was 19.4%(14 /72)and the control group was 24.2%(29 /120),the difference was not signifi-cant(P >0.05).The CHL thickness on the coronal oblique plane (n =63)in the patients with frozen shoulder was (4.37 ±1.71)mm, which was significantly greater than (2.84 ±0.79)mm ofpatients in the control group(n =104),the difference was significant(P <0.001). The CHL thickness on the axial plane(n =14)in the patients with frozen shoulder was (3.93 ±1.49)mm,which was significantly greater than (2.29 ±0.65)mm of patients in the control group(n =29),the difference was significant(P <0.001).Conclusion A thickened CHL is highly suggestive of frozen shoulder,which is 4.37 mm on the coronal oblique plane.
RESUMO
Objective Calcified epithelioma is a rare benign tumor in head and face. It is seldomly seen canceration. But it has local invasion behavior. The aim of this study was to explore the methodology in the diagnosis and treatment of calcified epithelioma in head and face, and to improve the accuracy of clinical diagnosis. Methods A retrospective analysis was carried out in 26 patients with calcified epithelioma in head and face. Results 53. 8 % patients with calcified epithelioma were less than 13-year-old. The disease was easily misdiagnozed. In this group of patients the misdiagnosis rate reached to 42. 3 %. Btype ultrasonographic diagnosis possessed a high level of concordance with histological diagnosis. There were three major types of calcified epithelioma: type 1, a mass with internal echoic foci; type 2, a hyperechoic mass with high beam; type 3, no calcification in the parenchyma. Piomatricoma was described as a skin tumour histologically composed of shadowcells, basophillic cells, foreign body giant cells and intracellular and stromal calcification. The treatment was excision and no recurrences were found by followup. Conclusions It is important for clinicians to know the clinical features of calcified epithelioma. Imaging studies including ultrasonography would help establish the diagnosis. Surgical excision with clear margins is recommended for this tumor.
RESUMO
Objective To develop a hepatic surgical planning software for hepatic operation on deciding the rational operational scheme, simulating procedures before the operation to accomplish the precise operation and decrease the operative risk. Methods The software was used in clinical practice to analyze the surgical anatomy of human liver, calculate the liver volume and vascular territory, disclose the hepatic structures and simulate the operation before operation. Results The surgical planning software is very convenient in analyzing the surgical anatomy of human liver, calculating the liver volume or vascular territory and simulating the operation before operation. Conclusion The developed surgical planning software is very helpful in clearly disclosing hepatic structures, rationally deciding operation scheme and virtually simulating the operation.
RESUMO
Objective To establish a 3D digitized visual model of the liver to provide anatomical structure for planning hepatic operations and creating accurate computer simulations of the liver.Methods Transverse sections of abdomen were chosen from the Chinese Visible Human dataset. The liver was reconstructed in three dimensions with surface rendering in combination with volume rendering reconstruction. Results Accurately segmented images of the main structures of liver were completed. The reconstructed structures could be displayed singly, in small groups or as a whole and could be continuously rotated in 3D space at different velocities. Conclusion The reconstructed liver is realistic and demonstrates the natural shape and exact position of hepatic structures. It provides an accurate model for the automated segmentation algorithmic study and a digitized anatomical model of the liver.
RESUMO
Objective To implement visualization and surgical simulation of female pelvis based on virtual reality. Methods The successive cross-section images of pelvic part from a Chinese Visible Human (CVH) dataset were adopted. The important organs in pelvis were segmented initially. Then the VRML-based visualization and Dextrobeam-based virtual surgery simulation were carried out. Results A networked pelvic model and a surgical model were constructed with virtual reality techniques. The organs and structures in pelvis could be displayed clearly and the simulated surgical operations could be performed. Conclusion The application of virtual reality techniques can facilitate the anatomical teaching and surgery design. More significantly, a realistic practice platform will be provided for medical education and training.
RESUMO
The second Chinese visible human (CVH) data has been used to build a more precise finite element model of Chinese head via 3-D image reconstruction, solid model reconstruction, finite element meshing, and assembling of finite element model. This second case of finite element model of Chinese head contains skull, facial bones, inferior maxilla, cerebral falx, brain, cerebellum brainstem, and so on. All the mesh elements, according to their main quality check results in line with the engineering requirements, were identified as solid elements, and the numbers of nodes and elements were determined to be 31 223 and 19 911 respectively. The model is coincident with the anatomy of human head; and its accuracy in some region, especially in fundus cranii and fundus cranii, is more excellent than that of the other models based on CT/MRL The development of the first head finite element model based on CVH data has brought on a remarkable progress in the application of CVH platform.
Assuntos
Humanos , China , Análise de Elementos Finitos , Cabeça , Imageamento Tridimensional , Projetos Ser Humano VisívelRESUMO
BACKGROUND: Magnesium alloy studies in orthopedic field have been carried out,and good biocompatibility has been reported.However magnesium alloys have not yet been researched in the intestine.OBJECTIVE: The biodegradable magnesium-zinc alloy samples are implanted around the rat cecum to investigate the biocompatibility in rat.METHODS: Sprague Dawley rats were randomly divided into magnesium alloy group,medical titanium group and the sham-operated group.Then magnesium-zinc alloy samples with the dimension of 5 mm × 1 mm× 1 mm were embedded in the cecum incision in the magnesium alloy group.The medical titanium was embedded in the medical titanium group,and just suture in the sham-operated group.Prior to surgery and at 7,14,21 and 28 days after operation,the serum glutamic-oxaloacetic transaminase,creatinine and magnesium ion concentration were examined in each group.X-ray film on implanted region.The pathological changes in liver,kidney and cecum were examined.RESULTS AND CONCLUSION: There were no significant differences in serum glutamic-oxaloacetic transaminase,creatinine and magnesium ion concentrations among each group(P > 0.05).Magnesium-zinc alloy degraded gradually during 28 days.The pathology of liver,kidney and cecum was normal.Results suggested that magnesium-zinc alloy had no obvious effect on the cecum.The degradation time to play a fixed function of time was longer than the intestinal healing time,with good biocompatibility.Magnesium-zinc alloy can be used as anastomotic nail for stomach intestine anastomat.
RESUMO
BACKGROUND: A novel biodegradable Mg-Zn alloy is designed which the density and the Young's modulus are proximal to human bone. At the same time, it depletes the toxicity of aluminium and rare earth element in commercial magnesium alloys. OBJECTIVE: To observe the effect of Mg-Zn alloy (Mg-6%Zn) on the integrin βi expression of preosteoblasts MC3T3-E1. DESIGN, TIME AND SETTING: A contrast study was performed at the Central Laboratory of the Sixth People's Hospital Affiliated to Shanghai Jiao Tong University between March and May 2008. MATERIALS: The Mg-6% Zn was prepared by School of Materials Science and Engineering of Shanghai Jiao Tong University, which the density was 1.82 g/cm~3 and the Young's modulus was nearly 44 GPa. Poly-L-lactic acid (PLLA) was used as the controls. MC3T3-E1 cells were provided by Chinese Academy of Science Type Culture Collection. METHODS: The cell attachment was observed after cultured with Mg-Zn and PLLA at 2, 24 and 48 hours under scanning electron microscope; the integrin β1 mRNA expression of MC3T3-E1 cultured with Mg-Zn and PLLA was estimated by real-time fluorescent quantitative polymerase chain reaction (real-time PCR) at days 1, 3, 6, 9,12 and 15 after culture. MAIN OUTCOME MEASURES: The MC3T3-E1 cells attachment on the material surface and the integrin β1 mRNA expression. RESULTS: MC3T3-E1 cell adhesion was better on the Mg-Zn alloy surfaces than on the PLLA surface; The integrin (31 mRNA of osteoblasts on Mg-Zn kept on expressing during experiment and increased with time (P < 0.01), but there was no significantly difference between the two groups at the same time (P > 0.05). CONCLUSION: MC3T3-E1 cell adhesion is better on the Mg-Zn alloy surfaces than on the PLLA surface, but it is not mediated by inducing the integrin p1 mRNA expression.
RESUMO
Objective To investigate the degradation of dicalcium phosphate dehydrate-coated Mg-Zn alloy in vivo and bone formation. Methods Left femoral condyles were drilled in 72 New Zealand rabbits, and were randomly divided into experiment group (n＝24, implanted with dicalcium phosphate dehydrate-coated Mg-Zn alloy rods), Mg-Zn alloy control group (n＝24, implanted with Mg-Zn alloy rods) and poly-L-lactide acid rod group (n＝24, implanted with poly-L-lactide acid rods). Serum concentrations of Mg~(2+) were examined 1 d pre-operation, and 1 d, 1 week, 2 weeks, 5 weeks and 10 weeks post-operation in experiment group and Mg-Zn alloy control group. Operation sites were examined by X-rays at 3, 6, 12 and 18 weeks post-operation. After X-ray examination at each time point, 6 rabbits in each group were sacrificed, and subjected to histopathological observation of live and kidney tissues by HE staining. Tissues from condyles of femur were observed by HE staining and 2, 4, 6-trinitrophenol rosein staining, and mineral apposition rate of bone was calculated. Results There was no significant difference in the concentrations of serum Mg~(2+) at each time point between Mg-Zn alloy control group and experiment group (P>0.05). X-ray examination revealed gas emerged near the implants 3 weeks after surgery in Mg-Zn alloy control group. However, there was no obvious histological abnormality in liver and kidney tissues. The mineral apposition rate was higher and the degradation of material was lower in experiment group than those in the other two groups. Conclusion Dicalcium phosphate dehydrate-coated Mg-Zn alloy has a favourable biocompatibility, and degrades more slowly in vivo.
RESUMO
Objective To build three-dimensional model of the pancreas and peripanercatic organs to provide morphological basis for imaging diagnosis and operation selection of pancreas diseases. Methods Serial cross-sectional images from the first Chinese visible human dataset were reviewed and the structures of pancreas and peripancreatic organs were reconstructed three-dimensionally by using 3D-Doctor software on PC. Results Three-dimensional structures of pancreas and peripancreatic organs were reconstructed successfully. All reconstructed structures could be displayed in multiple methods and color modes. Conclusions The internal and adjacent struc-tures of pancreas can be clearly shown on the reconstructed three-dimensional images. The visible model is a useful reference both for clinical diagnosis and surgical practice.
RESUMO
BACKGROUND:A novel biodegradable Mg-Zn alloy has been designed,in which the density and the Young's modulus are proximal to human bone,at the same time,it depletes the toxicity of aluminium and rare earth element in commercial magnesium alloys.OBJECTIVE:To evaluate the cytocompatibility of biodegradable Mg-Zn alloy.DESIGN,TIME AND SETTING:Contrast study was performed in the central laboratory of the Sixth People's Hospital of Shanghai Jiao Tong University between November 2007 and March 2008.MATERIALS:The Mg-6wt%Zn was prepared by School of Materials Science and Engineering of Shanghai Jiao Tong University,with the density was 1.82 g/cm3 and the Young's modulus was 44 GPa.L-929 cells for cytocompatibility test were provided by Chinese Academy of Science Type Culture Collection.Ten male New Zealand rabbits were employed in the hemolysis test.METHODS:The Mg-Zn alloy extraction medium was prepared by serial dilutions with fresh medium to 10%,50% and 100%.The experiments were carried out in a 96-well tissue-culture plate.Simple DMEM culture solution was taken as negative controls,while DMEM culture solution supplemented with 0.64% phenol served as positive controls.MAIN OUTCOME MEASURES:Relative proliferation rate of L-929 cells was determined at 2,4 and 7 days with MTT assay.The cytotoxicity of Mg-Zn alloy was evaluated according to ISO 10993-5:1999.The L-929 cell morphology and growth at 2,4 and 7 days were determined under inverted microscope.Based on ISO 10993-4:2002,hemolysis in vitro was evaluated through measuring erythrocyte lysis and ferrohemoglobin freeing degree with indirect contact method.RESULTS:The number of L-929 cells increased significantly and the morphology was not changed.The growth and morphology of cells in different Mg-Zn extraction medium had no difference from negative control group.Cytotoxicity test showed that biodegradable Mg-Zn alloy did not have obvious toxicity on L-929 cells,and the cytotoxicity of these extracts was in grade 0-1.Hemolysis test suggested that the Mg-Zn alloys did not have obvious hemolysis reaction,and the hemolysis index was 3.4%,which was less than the national standard (5%).CONCLUSION:The Mg-Zn alloys do not have obvious cytotoxicity and hemolysis reaction,which demonstrate that Mg-Zn alloys have good cytocompatibility.
RESUMO
BACKGROUND: Percutaneous laser disk decompression(PLDD) is a new interventional therapy of lumbar disk herniation recently. Posterior lateral route is often employed. Puncture route was investigated by the application of anatomic methods previously. However, there are relative fewer reports regarding the observation of the route of lumbar nerve root in intervertebral plane and triangle working area from thin section anatomy and CT section anatomy.OBJECTIVE: To clarify the intervertebral route and its adjacent relationship of lumbar nerve root on thin section and CT section to provide a anatomic gist for puncture route in PLDD.DESIGN: An observational study based on corpus and normal individual.SETTING: Department of radiology of a military medical university of Chinese PLA affiliated hospital and the department of anatomy of a military medical university of Chinese PLA.PARTICIPANTS: The collection of the first Chinese visible human was completed in the Department of Anatomy(laboratory of computer medicine) the Faculty of Medicine, Third Military Medical University of Chinese PLA in October 2002. Totally 53 subjects without confirmed vertebral and intervertebral disc diseases and other diseases of the adjacent organs received CT examination and measurement in the Department of Radiology of the Third Military Medical University of Chinese PLA Affiliated Southwest Hospital between january and March 2000.INTERVENTIONS: The intervertebral route of lumbar nerve root in the first Chinese visible human was observed descriptively. The route, morphology, size, adjacent structure, and the distance between puncture line and lumbar nerve in 53 normal individuals were observed and measured by CT.MAIN OUTCOME MEASURES: To describe the intervertebral route of lumbar nerve root in the first CVH and normal individual, to measure the intervertebral length and width of lumbar nerve, and the distance between puncture line and lumbar nerve.RESULTS: The first Chinese visible human lumbar has 48 layers of intervertebral space with a thickness of each layer of 1.0 mm. The route and adjacent structure of lumbar nerve displayed in each section were clear. CT image clearly showed the intervertebral route, size and adjacent structure of lumbar nerve root.CONCLUSION: The first Chinese visible human lumbar nerve root intervertebral route is a continuous and intact thin section specimen. The intervertebral route and morphology of lumbar root nerve have great alterations. The relationship between puncture route and its adjacent lumbar nerve root, anterior articular process, ilium wing and vessels is very close.
RESUMO
Objective To find out the best orientation and section for diagnosing rheumatic heart disease using multiplane transesophageal echocardiography (TEE). Methods The visible heart was compared with the images by multiplane TEE for the establishment of the best orientation and section for multiplane TEE for the diagnosis of rheumatic heart disease. Results The best orientation and section of mitral valve detected by multiplane TEE were the four chamber view at 0? orientation at the end part of esophagus. The best orientation and section of aorta valve were short axis section of the heart at 45? orientation and long axis section of the heart at 135? orientation at the middle part of the esophagus. The best orientation and section were the short axis section at 45? orientation and the oblique short axis section at 0? orientation of the aorta valve at the middle and the upper part of esophagus. Conclusion The best orientation and section of TEE based on the study of the visible heart are helpful to simplify the operation procedure of multiplane TEE and to shorten the examining time.
RESUMO
Objective To establish more detailed dataset of Chinese visible human male. Methods After undergoing macroscopical, CT and MRI examinations to exclude organic lesion, a young aged, middle sized male cadaver was selected as the subject. First, morphological measurement and vascular perfusion were performed. Second, after embedding with 5% gelatin, the cadaver was put in ice house and frozen to -30 ℃ for 1 week. Third, TK 6350 numerical control milling machine (milling accuracy of 0.001 mm) was used to shave off slices of the body layer by layer from head to foot at -25 ℃ in low temperature laboratory. Fourth, the successive cross sections were photographed with high resolution digital camera and scanned into an animation computer. Thus, data acquisition from cadaver model was completed to obtain structural dataset of the human body. Results The selected sample was a 21 year old, 1 820 mm in height, 66 kg in weight male died due to non organic disease. CT with 1.0 mm slice thickness for the head and neck and 2.0 mm for the rest of the body was performed. MRI with 1.5 mm slice thickness for the head and neck and 3.0 mm for the rest of the body was also performed. A total of 18 398 serial cross sections with the thickness of 0.1 mm of each section were obtained. The digital photographs were sampled at a resolution of 10 989 056 (4 064?2 704) pixels. The data file of each section occupies 62.9 MB. The complete data files occupy 1 157.23 GB. The research results are issued simultaneously on the Internet (http://www.chinese visiblehuman.Conclusion ① Review of the related literatures reveals that the thinnest thickness of the reported cross section of the visible human dataset is 0.2 mm(the thickness of the sections of the skull base of the first case of Chinese visible human reported by our research group is 0.1 mm.), and the slices consist of several thousands of serial cross sections with several millions of pixels. The data files occupy several tens of GB or more than 100 GB. However, the thickness of the cross sections of the whole body of the dataset achieved in our research is 0.1 mm. The total slices consist of 18 398 serial cross sections with the photographic resolution of 11 million pixels and the total data file reaches 1 157.23 GB. The three indexes mentioned above are elevated by 1 log unit. ② We have solved the key technical problems in data acquisition of visible human such as super thin serial cross sectioning, enormous quantity of data storing and display of tiny blood vessels.
RESUMO
Objective To study the sectional anatomy of the heart with esophagus to provide the sectional anatomic data for transesophageal echocardiography(TEE). Methods Hearts with esophaguses were sectioned at the angles of 0?, 45?, 90? and 135? relative to the human cross section by frozen section technique. The sectional anatomic structures were observed and analyzed. Results A total of 140, 130, 44 and 130 slices were obtained at the angles of 0?, 45?, 90? and 135?, respectively. The anatomic structures of the key slices were described. Conclusion The thin sections of the heart can clearly display the anatomical details of the inner structures of the heart, which may play an important role in the clinical application of TEE.
RESUMO
Objective To achieve computer visualization of the first Chinese visible male and female Methods After acquisition of the dataset of the first Chinese visible male and female (2 518 cross sections were obtained from the visible male, the complete data files take up 90 468 GBs; while 3 640 cross sections from the female, the complete data files take up 131 04 GBs ), we processed 2 D images in an SGI Workstation and on P4 computer respectively Then, image registration was performed through reserved scaling point Reconstruction was achieved by two approaches: volume rendering reconstruction and surface rendering reconstruction Results We visualized the whole body and special parts of Chinese visible male and female on an SGI Workstation and a personal computer respectively Furthermore, by optimizing 3 D reconstruction and data processing technique, interactive 3 D visualization of the dataset was achieved Conclusions ①The dataset of the first Chinese visible male and female proves to be eligible for 3 D visualization research ②The platform setup of interactive 3 D visualization of Chinese visible male and female dataset provides foundation for digital human anatomy and virtual surgery ③The models of human organs and parts built through data segmentation, classification, registration and drawing lay basis for rendering complex structures of the whole human body delicately
RESUMO
Objective To obtain the CT image 3 D reconstruction of head and neck region of the first Chinese visible human. Methods The CT data of head and neck region of the first Chinese visible human were processed with Siemens 3 D Virtuoso VA(R2.6) software in SGI Graphics Computer Workstation. The 3 D reconstruction of head and neck surface and skeletal structure were carried out and studied. Results The face and neck were well reconstructed. The nose, lips, ears and chin could be clearly shown. The skeletal structures in the head and neck region were fairly reconstructed and displayed very well and even the fine structures in skull base such as foraman ovale and foramen spinosum could be seen. Many anatomic structures such as pituitary gland, brain stem, cervical marrow, sphenoid sinus, nasopharynx could be displayed in detail on the 3 D reconstruction section. Conclusion This study has realized the CT image 3 D reconstruction and visualization of head and neck region of the first Chinese visible human and provided morphologic data for further studies of 3 D structures, comparative studies of anatomy and imaging of the head and neck.