Chemical constituents from fruits of Morinda citrifolia and their inhibitory effects on proliferation of synoviocytes in vitro / 中国中药杂志

The chemical constituents from the fruits of Morinda citrifolia were systematically explored by chromatographic fractionation methods including silica gel, octadecylsilyl(ODS) gel, Sephadex LH-20 gel, and preparative high performance liquid chromatography(pre-HPLC). The chemical structures of all isolated compounds were identified on the basis of their physicochemical properties, spectroscopic analyses, as well as the comparisons of their physicochemical and spectroscopic data with the reported data in literature. As a result, 22 isolated compounds from the 90% ethanol extract of the fruits of M. citrifolia were identified, which were moricitritone(1), 2'-deoxythymidine(2), cyclo-(L-Pro-L-Tyr)(3), methyl-5-hydroxy-2-pyridinecarboxylate(4), methyl pyroglutamate(5), bisbenzopyran(6), epipinoresinol(7), 3, 3'-bisdemethyl pinoresinol(8), 3, 3'-bisdemethyltanegool(9), trimesic acid(10), crypticin B(11), kojic acid(12), vanillic acid(13), protocatechoic acid(14), 5-hydroxymethyl furfural(15), blumenol A(16), 1-O-(9Z, 12Z-octadecadienoyl) glycerol(17), mucic acid dimethylester(18), methyl 2-O-β-D-glucopyranosylbenzoate(19), 2-phenylethyl-O-β-D-glucoside(20), scopoletin(21), and quercetin(22). Among them, compound 1 was a new pyrone derivative, compounds 2, 4-7, 10-12, and 17 were isolated from the plants belonging to Morinda genus for the first time, and compound 18 was obtained from M. citrifolia for the first time. Moreover, on the basis of testing the activities of all isolated compounds on inhibiting the proliferation of synovial fibroblasts in vitro by MTS assay, the anti-rheumatoid arthritis activities of all isolated compounds were initially evaluated. The results showed that compounds 1-6, 9, 19, and 20 exhibited remarkable anti-rheumatoid arthritis activities, which displayed the inhibitory effects on the proliferation of MH7A synovial fibroblast cells with the IC_(50) values in the range of(3.69±0.08) to(168.96±0.98) μmol·L~(-1).

Design and application of a new type of oral humidifier / 中华危重病急救医学

Oral feeding of water cannot be accomplished in some critical patients due to coma, mouth-breathing or long-term indwelling of gastric tube, causing dry mouth which results in oral pain, ulcer, or infection, aggravating patients' discomfort and even affecting the prognosis. To solve this problem, the medical staff of the First Hospital of Jiaxing developed a novel oral humidifier and obtained the National Utility Model Patent of China (ZL 2019 2 0066979.0). The oral humidifier consists of a spraying device and a fixation device. The spraying device is a spraying housing with a water tank, and a spraying port where nanometer water mist can be emitted. The spraying housing is also equipped with a flashlight with a switch, and a schematic diagram of pupil size, which can be used to assess the pupil size conveniently. The fixing device is composed of a fixing frame, an adjustable rod and a clamp. The two ends of the adjustable rod are connected to the fixing frame and the clamp respectively, and can be adjusted to proper shape. The spraying housing can be placed on the fixing frame and installed on the bed and adjusted to the proper position quickly. This novel oral humidifier is a simple device which combines a spraying system with a pupil evaluation tool, implying significant clinical application in improving the convenience of nursing and alleviating dry mouth of critical patients.

Design and application of the improved atomized airway humidifier / 中华危重病急救医学

Airway humidification is an important treatment for tracheotomy patients. At present, the commonly used methods of humidification are atomization inhalation, intra-tracheal drip, etc., but most of them have the disadvantages of interrupted humidification, inadequate humidification, repeated exposure of airway, increased nursing workload, etc. An improved disposable atomizer was designed by the emergency department of Jiaxing First Hospital in Zhejiang Province, which solved the above problems and obtained the National Utility Model Patent of China (ZL 2014 2 0406688.9). In the traditional atomizer, a make-up pipeline is added to run through the liquid container. The replenishing pipe is connected with an external infusion device. At the end of the pipeline inside the liquid container, a buoy with a guide rod is designed to continuously add liquid and automatically control the make-up speed. The device is driven by oxygen to perform airway humidification. The design can keep sufficient airway humidification, avoid frequent addition of humidification fluid, achieve the effect of increasing humidification, reducing the occurrence of complications, increasing the comfort of patients, and reducing the workload of nursing, and has a certain clinical value.

Design and application of a new patient transfer device / 中华危重病急救医学

In daily medical work, most of the critically ill patients who cannot move by themselves are pulled and lifted by manpower, often relying on the cooperation of many doctors and nurses, which not only increases the risk of transfer and patients' discomfort, but also causes certain skeletal and muscle damage to the porters. The emergency department of the First Hospital of Jiaxing City, Zhejiang Province designed a kind of patient transfer device, and obtained the National Utility Model Patent (ZL 2018 2 0579844.X). The transfer device is composed of upper frame, lower frame and base. The upper frame and the lower frame are rectangular and in a horizontal position. The upper frame can slide laterally through the circular tubes which are fixed on the lower frame. The lower part of the base is provided with four universal foot brake wheels. During the usage, the booster frame facilitates the transfer of patients by the rolling and two sliding tracks of the circular tube, which can make patients move smoothly and comfortably, and reduce the working intensity of the transporter. This device has good practical value.

Design and application of a new patient transfer device / 中华危重病急救医学

In daily medical work, most of the critically ill patients who cannot move by themselves are pulled and lifted by manpower, often relying on the cooperation of many doctors and nurses, which not only increases the risk of transfer and patients' discomfort, but also causes certain skeletal and muscle damage to the porters. The emergency department of the First Hospital of Jiaxing City, Zhejiang Province designed a kind of patient transfer device, and obtained the National Utility Model Patent (ZL 2018 2 0579844.X). The transfer device is composed of upper frame, lower frame and base. The upper frame and the lower frame are rectangular and in a horizontal position. The upper frame can slide laterally through the circular tubes which are fixed on the lower frame. The lower part of the base is provided with four universal foot brake wheels. During the usage, the booster frame facilitates the transfer of patients by the rolling and two sliding tracks of the circular tube, which can make patients move smoothly and comfortably, and reduce the working intensity of the transporter. This device has good practical value.