Comparison of 2,3-butanediol production by several strains and optimization of the fermentation medium / 生物工程学报

Five Klebsiella pneumonia strains (including two strains whose genes for lactic acid were knocked out) were used to produce 2,3-butanediol, in which K. pneumonia HR521 LDH (gene for lactic acid was knocked out) was the best for the production, and then the fermentation medium was optimized by orthogonal design. The optimum compositions were as follows: glucose 90 g/L, (NH4)2HPO4 3 g/L, CLSP 6 g/L, sodium acetate 5 g/L, KCl 0.4 g/L, MgSO4 0.1 g/L, FeSO4 x 7H2O 0.02 g/L, MnSO4 0.01 g/L. Under the above conditions, final concentration of acetone and 2,3-butanediol could reach 37.46 g/L, 10 g/L higher than that under the initial conditions, the yield was 90.53% of the theory, and the productivity was 1.5 g/(L-h), and no lactic acid was detected, which could be benefit for the downstream processing and industrial application.

Progress in down-stream processing of biologically produced 1,3-propanediol / 生物工程学报

1,3-propanediol is an important raw material in chemical industry. Microbial conversion of glycerol or glucose into 1,3-propanediol has been given much attention due to its renewable resource, mild reaction conditions, and other advantages. It is a challenge to efficiently separate 1,3-propanediol from a mixture of multiple components, such as 1,3-propanediol, 2,3-butanediol, water, residual glycerol, ethanol, macromolecules and salts, for the reason that 1,3-propanediol, glycerol and 2,3-butanediol are all very hydrophilic and have intense polarity. The conventional evaporation and distillation techniques used in the purification of 1,3-propanediol suffer from the problem of high energy consumption and low recovery. It makes the recovery of 1,3-propanediol from a fermentation broth become a bottleneck in industrial production. The down-stream processing of biologically produced 1,3-propanediol mainly includes the removal of protein, salts, water and other impurities. This paper analyze the research progress of these separation technologies and point out the developing direction worth further investigation.