Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
1.
Journal of Central South University(Medical Sciences) ; (12): 142-148, 2021.
Artigo em Inglês | WPRIM | ID: wpr-880635

RESUMO

OBJECTIVES@#To screen the risk factors for predicting venous thromboembolism (VTE) risk after hip fracture in the elderly, to establish a prediction model based on these factors, and to analyze its prediction efficacy.@*METHODS@#A total of 52 hip fracture patients over 60 years old with VTE admitted to the Department of Orthopaedic Trauma, Xiangya Hospital, Central South University from March 2017 to April 2019 were selected as a thrombus group, and another 52 hip fracture patients over 60 years old without VTE were selected as a control group. The differences of hospitalization data and examination results between the 2 groups were compared. Logistic regression model was used to explore the influence of risk factors on VTE risk after hip fracture in the elderly and construct the prediction model based on these factors. The receiver operating characteristic curve was used to analyze the predictive effectiveness of model, Hosmer-lemeshow goodness of fit test was used to evaluate the fitting degree of prediction model.@*RESULTS@#Univariate analysis showed that injury-admission interval, Caprini score, WBC count, platelet count, neutrophil count, neutrophil-to-lymphocyte ratio, platelet-to-lymphocyte ratio, monocyte-to-lymphocyte ratio, systemic immune-inflammatory index (SII), and fibrinogen in the thrombus group were higher than those in the control group (all @*CONCLUSIONS@#SII, Caprini score, and injury-admission interval are independent predictors of VTE after hip fracture in the elderly. The prediction model based on these 3 factors has a good efficacy on the prediction of VTE risk, and could provide important reference for the prevention, management, and treatment of VTE after hip fracture in the elderly.


Assuntos
Idoso , Humanos , Pessoa de Meia-Idade , Fraturas do Quadril/cirurgia , Curva ROC , Estudos Retrospectivos , Medição de Risco , Fatores de Risco , Tromboembolia Venosa/etiologia
2.
Chinese Journal of Geriatrics ; (12): 1348-1351, 2018.
Artigo em Chinês | WPRIM | ID: wpr-734482

RESUMO

Objective To retrospectively analyze the effects of nerve block anesthesia versus general anesthesia on intertrochanteric fracture in the elderly. Methods The 104 elderly inpatients undergoing closed reduction and intramedullary nailing for the treatment of femoral intertrochanteric fractures were recruited into this study at Department of Orthopedics ,Xiangya Hospital ,Central South University from January 2015 to June 2017.Medical records were collected and analyzed by SPSS 16.0 or GraphPad Prism 6.0 software. Results A total of 104 patients were divided into general anesthesia group(n= 48 )and nerve block anesthesia group (n= 56 ). There was no statistical difference in the demographic characteristics between the two groups. The changes in heart rate ,maximum changes of systolic/diastolic blood pressures ,and infusion volume during surgery were lower in the nerve block anesthesia group than in the general anesthesia group [(12.7 ± 7.3)vs. (18.1 ± 7.8)beats/min ,(22.5 ± 8.8/12.2 ± 7.5)mmHg vs. (34.3 ± 7.9/21.6 ± 6.6)mmHg ,(792.9 ± 387.0)ml vs. (1 083.0 ± 445.5)ml ,respectively ,t=3.64 ,7.14 ,6.73 ,5.16 ,all P<0.01]. There was no statistically significant difference between two groups in other perioperative data and the number of deaths at three months and one year after surgery. Conclusions As compared with the general anesthesia ,the nerve block anesthesia has less effects on the heart rate ,less maximum changes of systolic and diastolic blood pressures ,and less infusion volume during surgery ,and has no significant increase in postoperative mortality ,which is safe and worthy of further promotion.

3.
Chinese Journal of Tissue Engineering Research ; (53): 4915-4919, 2010.
Artigo em Chinês | WPRIM | ID: wpr-402431

RESUMO

BACKGROUND: With deepening of spinal biomechanics, artificial lumbar disc replacement is considered to be the optimal choice for treating degenerative lumbar disease. However, studies concerning biomechanics of artificial lumbar disc are insufficient. OBJECTIVE: To establish the three-dimensional (3-D) finite element model of artificial lumbar disc replacement and to explore the effects of artificial lumbar disc replacement on zygapophyseal joints using biomechanical analysis. METHODS: Based on normal 3-D finite element model of lumbar motion segment, L4-5 intervertebral disc, superior and inferior endplates were removed, and then, the model of SB-Charite Ⅲ disc prosthesis was added, which remained annular fibrosus and ligaments at L4-5 intervertebral space. Thus, 3-D finite element model of L4-5 segments artificial lumbar disc replacement was constructed. Biomechanical analysis of this model was processed under axial load, forward flexion, lateral bending or posterior extension moments. The stress data were contrasted with the normal 3-D finite element model of artificial disc replacement. RESULTS AND CONCLUSION: After artificial lumbar disc replacement, the data of biomechanical analysis indicated: ①There was no significant differences between the zygapophyseal joint and normal segment of stress under axial load (P > 0.01).②Compared with normal segment, the stress of anterior, posterior of upper and lower vertebral body and bilateral zygapophyseal joint had no obviously difference under forward flexion and posterior extension moments (P > 0.01). ③The stress differences between the both sides of upper and lower vertebral body and bilateral zygapophyseal joint were not significant under lateral bending moment (P > 0.01). Artificial lumbar disc replacement can keep the stress of motion segment at normal level, which can meet the needs of spinal functional reestablishment.

4.
Chinese Journal of Microsurgery ; (6): 186-189,后插1, 2010.
Artigo em Chinês | WPRIM | ID: wpr-571577

RESUMO

Objective To explore the clinical outcome of perforator flaps for reconstruction of limb soft tissue defects. Methods In this case series, from 2007 July to 2009 May, 108 cases of perforator flap to reconstruct the defects of the extremities were performed, of these, 98 were free perforator flaps, 10 were pedicled flaps. The perforator flaps included deep inferior epigastric artery perforator flap, anterolateral thigh perforator flap, thoracodorsal artery perforator flap, lateral thigh perforator flap, posterior interosseous artery perforator flap, collateral radial artery perforator flap, medial sural artery perforator flap, posterior tibial artery perforator flap, deep circumflex iliac artery perforator flap and peroneal artery perforator flap. The maximum size of the perforator flap was 44 cmx 9 cm, the minimum size of the perforator flap was 4 em x 2 cm.The donor defect was closed directly. Results Venous congestion occurred in 5 flaps, in 1 case venous congestion was overcomed after released the dressing, 4 flaps requiring reexploration for venous insufficiency,2 had a successful outcome, the other 2 flaps failed . The other 103 flaps were successful. The wounds healed without any infection complications. The follow-up ranges from 6-24 months( 10 months on average). The flaps were of good appearance and not bulky; there were only linear scars on the donor sites, the cosmesis and function of the donor sites were satisfying. Conclusion The muscle, deep fascia and motor nerve are not contained in the flap, the advantages of this type of flap is reducing morbidity of the donor site and its reliable blood supply and suitable thickness for resurfacing, no secondary debuiking is necessary. The perforator flaps can be chosen as the first option to deal with superficial extremity wounds.

5.
Journal of Central South University(Medical Sciences) ; (12): 630-633, 2010.
Artigo em Chinês | WPRIM | ID: wpr-814407

RESUMO

OBJECTIVE@#To determine the effectiveness of external fixator combined with limited internal fixation for Tile B pelvic fractures.@*METHODS@#Fourteen patients with Tile B pelvic fracture were treated by external fixator combined with limited internal fixation between September 2004 and June 2009.@*RESULTS@#All the patients were followed for 6-49 (20.2 +/- 10.2) months. According to the Matta standard, the outcome of 9 patients was excellent, 4 patients were good, while the other one patient was fair.@*CONCLUSION@#External fixator combined with limited internal fixation is effective for Tile B pelvic fracture. It can not only reduce the anatomic position of the pelvis, but also strengthen the stability of the pelvis as a whole. This method is less invasive and traumatic, which promotes the recovery of patients.


Assuntos
Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Adulto Jovem , Fixadores Externos , Fixação de Fratura , Métodos , Fixação Interna de Fraturas , Métodos , Fraturas Ósseas , Cirurgia Geral , Ossos Pélvicos , Ferimentos e Lesões , Cirurgia Geral
6.
Chinese Journal of Tissue Engineering Research ; (53)2005.
Artigo em Chinês | WPRIM | ID: wpr-556447

RESUMO

BACKGROUND: Artificial lumbar disc replacement is a novel approach to treat lumbar disc protrusion. But its theoreticalbasis needs further verification.OBJECTIVE:To establish finite element model of lumbar disc replacement for biomechanical studies.DESIGN: A single sample study taking the data of L4-5 three-dimensional infinite element model as object of research.SETTING: Orthopedic Department of Xiangya Hospital of SunYat-sen University.PARTICIPANTS: The trial was conducted in the Laboratory of the Orthopedic Department of Xiangya Hospital from December 2003 through August 2004. A healthy male volunteer served as simulation. His T12-S1 underwent continuous CT scanning. There were altogether 264 images with 2 mm inthickness each. Three-dimensional images were reconstructed every 15° in order to obtain the data for three-dimensional model.METHODS: The CT images and human anatomical data were processed by 3DSMAX software to establish three-dimensional L4-5 model of normal Chinese males. It was then transformed to finite element model after processed by SAP2000 software together with Charite SB Ⅲ disc prosthesis model.MAIN OUTCOME MEASURES: The three-dimensional model and finiteelement model of lumbar spine were successfully established.RESULTS: The finite element model of Charite SB Ⅲ disc replacement in L4_5 spine was established. The total nodes were 2542 and there were 1924Solid units, 592 Area units and 50 link units.CONCLUSION:The finite element model of artificial disc replacement can be established by CT scanning, digital processor and computer aideddesign,and used for further study on spinal biomechanics.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA