Clinical characteristics and treatment strategy of five phosphaturic mesenchymal tumors in hips / 中华骨科杂志

Objective To analyze the clinical characteristics and treatment strategy of phosphaturic mesenchymal tumors in hips.Methods From May 2017 to November 2017,five patients with phosphaturic mesenchymal tumors in hips,who treated in our hospital were retrospectively reviewed.The clinical manifestations,laboratory inspection,radiological examination,pathological examination and treatment were analyzed.Results Two male cases (40％) and 3 female (60％) were included.The overall age was 49～63 years old (average 54.40±5.37 years old).The course was 19～101 months (average 51.20±32.41months).Four cases of tumor were located in femoral head and 1 case was in femur intertrochanteric region.The maximum tumor diameter was 0.76～1.83 cm (average 1.28±0.39 cm).The early clinical manifestations of the patients were mainly non-specific bone pain or fatigue.The symptoms of the hip were not obvious.All patients had been misdiagnosed.After pathological frac-ture of the hip,the patient suffered from hip pain,thigh pain,fatigue,etc.,or limited hip function.The severe patients had a systemic multiple pathologic fractures.The serum phosphorus was lower than normal in preoperative period and recovered to normal level in 3-8 days after surgery.The postoperative ALP decreased significantly than preoperative in 4 patients and 1 case was slightly higher than preoperative.Preoperative 1,25-(OH)2-D3 and PTH were in normal range.99Tcm-octreotide (OCT) scan or 68Ga DOTA-TATE PET/CT can detect the disease.X-ray,CT and MRI can identify the lesions.The lesions of femoral head were basically under the joint surface,with a nodular change.Part of the tumor was infiltrating and close to the cortex.The pathology was mainly manifested as a large number of thin-walled vessels in the bone trabeculae.There were dense spindle cells or astrocytes between the blood vessels and the atypia is not obvious.Three patients were treated with total hip arthroplasty and two with segmental resection and bone graft.After surgical removal of the tumor,the patient's systemic pain or anemic symptoms were gradually relieved and the joint function was restored.Meanwhile,the bone density was increased.Conclusion The clinical features of the phosphaturic mesenchymal tumors in hips were not obvious.Comprehensive diagnosis should be carried out in combination with the clinical manifestations,laboratory examination,radiological examination and pathological examination.Total hip arthroplasty or segmental resection with bone graft can effectively remove the tumor and achieve good prognosis.

Different fixations for intertrochanteric fracture affect proximal femur stress:a finite element analysis / 中国组织工程研究

BACKGROUND:The mechanical characteristics of intramedul ary and intramedul ary fixations for treating intertrochanteric fracture were hot research of finite element, but there was few comparative research on tension side and pressure side of proximal femur. In our study, we found that the distribution of the stress zone was important indication to researches on intertrochanteric fracture and internal fixation design. OBJECTIVE:To explore the effects of intramedul ary and extramedul ary fixations for treating intertrochanteric fracture on pressure side and tensile side of proximal femur. METHODS:CT scan and Mimics modeling of volunteer’s femur were conducted, and the model Evans type I intertrochanteric fracture was constructed and treated with proximal femoral nail antirotation and dynamic hip screw respectively. The stress condition of proximal femur in weight status was simulated. The Abaqus 6.13 was used for finite element analysis, and the tension side and pressure side of proximal femur in both fixations were also analyzed. RESULTS AND CONCLUSION:(1) The stresses of compressive side and tensile side in proximal femoral nail antirotation group were both less than that in dynamic hip screw group. The stress of proximal femur in proximal femoral nail antirotation group was more similar to that in physiological status. (2) These findings verified that for treating intertrochanteric fracture, intramedul ary fixation exerted better mechanical behavior than extramedul ary fixation. The protection of compressive side and tensile side of proximal femur had achieved by intramedul ary fixation.

Finite element analysis of elderly femoral neck fracture based on LS-DYNA / 中国组织工程研究

BACKGROUND:With the increasing of aging, the incidence and mortality of osteoporotic hip fracture wil rise. It is of great significance to study the pathogenesis and preventing method. At present, finite element analysis can be used to judge fracture, only for the distribution trend of fracture failure in the starting point or section view, but it cannot completely reflect actual situation of fracture. OBJECTIVE:To build the fracture model of the femoral neck fracture caused by fal ing-induced external force based on the finite element analysis LS-DYNA software, and to evaluate the effect of rupture. METHODS:CT image data of one case of elderly femoral neck fracture were col ected. Using Mimics software, region growth of the contralateral area, cavity fil ing, editing, rebuilding the contralateral proximal femur model were conducted. Data were imported in Hypermesh and LS-DYNA software for meshing, and defining material properties. The failure parameters and interfacial properties were set. The load and force boundary constraints simulating the fal ing were simulated. The model of femoral neck fracture was calculated. Rupture effect was evaluated. RESULTS AND CONCLUSION:(1) The validity of contralateral proximal femur three-dimensional model was verified. Based on the finite element analysis software LS-DYNA, the femoral neck fracture model matched the actual fracture line to a degree of close to 83%. (2) Above results confirmed that based on the finite element analysis, LS-DYNA software can wel simulate the femoral neck fracture, which provides experimental basis to the exploration of femoral neck fracture classification mechanism caused by different fal ing-induced external forces.

Optimization and Preliminary Methodology Study of in vitro Fresh Human Whole Blood Detection Method for Pyrogen-related Factor IL-1β / 中国药房

OBJECTIVE:To establish the detection method for pyrogen-related factor interleukin 1β(IL-1β)through optimiz-ing detection condition,and to conduct preliminary methodology study. METHODS:The in vitro fresh human whole blood detec-tion method was used. The bacterial endotoxin standard solution(5,2,0.8,0.32 EU/ml)were added into diluted blood;using di-luted RPMI 1640 as blank control,the content of IL-1β in blood sample was determined by ELISA after incubation. The relation-ship of the addition of different attenuants(RPMI 1640 culture,sterilized normal saline)and fetal bovine serum,final dilution vol-ume fraction(40%,20%,10%and 8.3%)and storage duration(2,5,6,8,26 h)with the contents of endotoxin IL-1βwere in-vestigated,and related coefficient and detection limits were calculated. Different dilution times of Qingkailing injection and Ginaton injection samples and interference solutions were added into diluted blood to detect their recovery. RESULTS:The results indicated that RPMI 1640 media and 40% diluted blood was more sensitive(detection limit was 0.128 EU/ml,r=0.993);while the addition of fetal bovine serum didn’t influence the results. The detection limits of blood sample storied at 4 ℃ for 26 h were 0.128 EU/ml (r>0.990). When Qingkailing injection and Ginaton injection were diluted 10,32 and more times,the detection method was not interfered and the recovery ranged 68%-118%. CONCLUSIONS:Established in vitro fresh human whole blood detection method can be used for the detection of pyrogen,and provides trial evidence for the pyrogen detection of TCM injection.

Intermediate Evaluation of Clinical Efficacy of Improved Surgical Method Combined with Chinese Medicine for Treatment of Young and Middle-aged Femoral Neck Fractures / 广州中医药大学学报

Objective To explore the effect of improved surgical method of intramedullary fibular allograft together with cannulated screw fixation combined with blood-activating and stasis-resolving Chinese medicine on the quality of life (QOL) of young and middle-aged fresh femoral neck fractures at intermediate stage. Methods A retrospective analysis was carried out in the articular orthopedics department of the First Affiliated Hospital of Guangzhou University of Chinese Medicine. The study involved 80 cases of young and middle-aged fresh femoral neck fractures receiving intramedullary fibular allograft together with cannulated screw fixation, and 50 qualified cases receiving cannulated screw fixation alone ( control group) . After the operation, all of the patients were given oral use of blood-activating and stasis-resolving Chinese medicine. After the last follow-up, Harris hip scoring, SF-36 scoring and radiographic evaluation were performed for the evaluation of clinical efficacy. Results The clinical application of intramedullary fibular allograft together with cannulated screw fixation combined with Chinese medicine was fulfilled in 80 hips of 80 cases. The follow-up period ranged from 48 to 84 months, averaging 62.68 ± 12.43 months. The improved surgical method group had an excellent and good rate of 93.75%, presented excellent-grade Harris scores and SF-36 scores, and had higher QOL scores than the control group (P<0.05) . After treatment, the two groups had statistically significant differences in the scores of SF-36 items of physical function ( PF) , bodily pain ( BP) , mental health ( MH) , vitality ( VT) , and general health ( GH) ( P<0.05 or P<0.01) , and also had significant differences in Harris scoring of pain, function and daily activities as well as the joint range-of-motion ( P<0.05 or P<0.01) . Conclusion The improved surgical method of intramedullary fibular allograft together with cannulated screw fixation combined with blood-activating and stasis-resolving Chinese medicine shows satisfactory therapeutic effect for young and middle-aged fresh femoral neck fractures at intermediate stages, which has the advantages of lower collapse rate after femoral head necrosis, less joint replacement, higher scores of the quality of life and Harris scoring, and better radiographic indicators than cannulated screw fixation alone.

Study of model establishment of unicompartmental knee athroplasty based on three-dimensional parametric modeling method / 生物医学工程学杂志

The model of knee OA (KOA) was established in our laboratory with three-dimensional (3D) reconstruction technique based on the CT data. We then designed the unicompartmental prosthesis matching KOA model with parametric software Pro/e 5. 0. Finally, the models were used to mimic the operation of knee unicompantment replacement and the model of unicompartmental knee athroplasty (UKA) was analyzed using 3D finite element method. The results indicates that the approach for designing the model by 3D parametric is effective and meets the need of automation and efficacy to design unicompartmental prosthesis. The results proves that the model is vivid and precise, and the 3D parameteric modeling method can provide biomechanical research of unicompantment replacement with model foundation and new experimental method. It can be widely utilized in the clinics and research.

Establishment and application of subject-specific three-dimensional finite element mesh model for osteonecrosis of femoral head / 生物医学工程学杂志

This paper is aimed to acquire high Geometric similar Subject-specific three-dimensional (3D) finite element mesh model of hip joint containing necrotic femoral head according to individual patient's X-ray, CT and MRI by using the image registration and fusion technology. We selected a middle-aged female patient with osteonecrosis of femoral head, obtained the X-ray, CT and MRI images respectively. Then we established 3D solid model separately based on these image data by using Mimics 13. 1 and Pro/E 5.1 software. We confirmed the match points and then proceed the 2D image registration after image projection conversion. Finally we showed the 3D finite element mesh model. A highly geometric similar subject-specific 3D finite element mesh model for osteonecrosis of femoral head has been established, which included normal cortical bone, cancellous bone, articular cartilage and necrotic zone, fractured trabecular bone within the femoral head. The model truly reflects the morphological characteristics and relationship of hip joint with osteonecrosis of femoral head, provides a relatively ideal research platform for further biomechanical analysis and surgical simulation.