Epicoccum nigrum and Cladosporium sp. for the treatment of oily effluent in an air-lift reactor

The metalworking industry is responsible for one of the most complex and difficult to handle oily effluents. These effluents consist of cutting fluids, which provide refrigeration and purification of metallic pieces in the machining system. When these effluents are biologically treated, is important to do this with autochthonous microorganisms; the use of these microorganisms (bioaugmentation) tends to be more efficient because they are already adapted to the existing pollutants. For this purpose, this study aimed to use two indigenous microorganisms, Epicoccum nigrum and Cladosporium sp. for metalworking effluent treatment using an air-lift reactor; the fungus Aspergillus niger (laboratory strain) was used as a reference microorganism. The original effluent characterization presented considerable pollutant potential. The color of the effluent was 1495 mg Pt/L, and it contained 59 mg/L H2O2, 53 mg/L total phenols, 2.5 mgO2/L dissolved oxygen (DO), and 887 mg/L oil and grease. The COD was 9147 mgO2/L and the chronic toxicity factor was 1667. Following biotreatment, the fungus Epicoccum nigrum was found to be the most efficient in reducing (effective reduction) the majority of the parameters (26% COD, 12% H2O2, 59% total phenols, and 40% oil and grease), while Cladosporium sp. was more efficient in color reduction (77%).

Saprophytic fungus collection by africanized bees in Brazil / Coleta de fungos saprofíticos por abelhas africanizadas no Brasil

Cladosporium sp. collection by bees (Apis mellifera L.) was observed in Brazil at an apiary located in Minas Gerais, during November10-23, 2005, characterized by high air relative humidity and low availability of food resources (pollen and nectar).The nutritional composition of the fungi pellets presented high protein value, ethereal extract and organic matter.

A coleta de Cladosporium sp. por abelhas (Apis mellifera L.) foi observada no Brasil em um apiário localizado em Minas Gerais, no período de 10 a 23/11/05, caracterizado pela alta umidade relativa do ar e escassez de recurso alimentar (pólen e néctar). A composição nutricional das bolotas de fungos apresentou alto valor protéico, extrato etéreo e matéria orgânica.

Bio-control potential of Cladosporium sp. (MCPL - 461), against a noxious weed Parthenium hysterophorus L.

The phenological survey of Parthenium hysterophorus L., in and around the campus of Banaras Hindu University (BHU) was done for about two years (2004-06). During Nov. 2004, a few Parthenium plants were found diseased, and symptoms were restricted to the flowers, buds, and inflorescences. The disease causes sterility and reduces seed viability, which was observed with seed germination test from infected and healthy plants. The fungal pathogen was isolated and identified as Cladosporium sp. (MCPL-461). The severity of pathogen to the reproductive organs led to serious damages of the Parthenium plants. Thus in vitro and in vivo experiments were conducted to determine the bio-control potential of Cladosporium sp. (MCPL 461) against Parthenium weed. A combinatorial effort of Cladosporium sp. (MCPL 461) bio-control potential was evaluated with different culture media, incubation periods and spores strength. Spore suspension of 105 to 1012 spores ml-1 were used to spray on healthy Parthenium plants, and it was found that severe infection symptoms were appeared at 1010 to 1012 spores ml-1 suspension. LD50 was found at 107spores ml-1. To enhance the myco-herbicide activity 3% sucrose was added to the spore suspension, which further resolute the bio-control efficacy of the isolates. Only 20-30 % seeds of infected plants could germinate. However the safety of non-targeted and wild plants was also tested with Lantana camera, Chromolaena odorata and found that suspension up to 1012 spores ml-1 were not sufficient for disease outbreak in them.