Evaluación comparativa de perfiles de disolución del medicamento genérico lamivudina tableta 150 mg comercializado en Perú frente al innovador Epivir / Comparative evaluation of dissolution profiles of the generic drug lamivudine 150 mg tablet marketed in Peru vs. the innovative Epivir

RESUMEN La lamivudina es uno de los medicamentos más prescritos en el mundo, se utiliza para tratar la inmunodeficiencia humana y la hepatitis B. El objetivo del estudio fue evaluar los atributos de calidad y comparar los perfiles de disolución de dos lotes (A y B) del medicamento genérico lamivudina 150 mg tabletas con el medicamento innovador Epivir 150 mg tabletas. Se realizó un estudio analítico, experimental y de corte transversal, se usó un método espectrofotométrico a una longitud de onda de máxima absorción (λ) correspondiente a 270 nm, para medir el porcentaje de fármaco disuelto. El estudio evaluó identificación, contenido, disolución y uniformidad de masas. Se usó el aparato 2 USP (Paleta) 75 rpm, 900 mL de medio de disolución (37 ± 0,5 °C) a en tres medios de disolución: pH 1,2; 4,5 y 6,8. Se retiraron muestras de 5 mL a los 5, 10, 15, 20 y 30 min. Se encontró que ambos lotes de lamivudina genérico (A y B) presentan el mismo perfil cinético de disolución que el medicamento innovador. Ambas formulaciones cumplen con el criterio de medicamentos de disolución muy rápida (85% disuelto en 15 min), y de disolución rápida (85% disuelto en 30 min). Por lo tanto, no fue necesario calcular el factor de similitud. Se concluye que los medicamentos genéricos A y B son equivalentes in vitro con el medicamento innovador Epivir.

ABSTRACT Lamivudine is one of the most prescribed drugs in the world, and is used to treat human immunodeficiency and hepatitis B. This study aimed to evaluate the quality attributes and compare the dissolution profiles of two batches (A and B) of generic lamivudine 150 mg tablets with the innovator drug Epivir 150 mg tablets. We conducted an analytical, experimental, cross-sectional study, and used a spectrophotometric method at a wavelength of maximum absorption (λ) corresponding to 270 nm, to measure the percentage of dissolved drug. The study evaluated identification, content, dissolution and mass uniformity. Apparatus 2 USP (Paddle) 75 rpm, 900 mL of dissolution medium (37 ± 0.5 °C) was used in three dissolution media: pH 1.2; 4.5 and 6.8. Samples of 5 mL were obtained at 5, 10, 15, 20 and 30 min. Both batches of generic lamivudine (A and B) were found to have the same dissolution kinetic profile as the innovator drug. Both formulations met the criteria of very fast dissolving (85% dissolved in 15 min), and fast dissolving (85% dissolved in 30 min) drugs. Therefore, it was not necessary to calculate the similarity factor. We concluded that generic drugs A and B are in vitro equivalents to the innovator drug Epivir.

Adaptation and latent structure of the Brazilian version of the Ego Dissolution Inventory (EDI-BR): an exploratory study

Abstract Objective Existing scales that seek to measure alterations in self-experience were developed based on studies conducted in developed countries. Therefore, the aim of this study was to evaluate the psychometric properties of the Ego Dissolution Inventory (EDI) after translating and adapting it for the Brazilian context. Methods The measure was translated by two translators fluent in both English and Portuguese, followed by back-translation into English to ensure there was no loss of meaning. The scale was used in an online survey exploring substance use. A total of 528 participants answered the full scale. We calculated the Kaiser-Meyer-Olkin (KMO) measure to evaluate sampling adequacy, then ran exploratory factor analysis (EFAs) to investigate the factor structure of the EDI. Results The scale showed acceptable psychometric properties, with excellent internal consistency and sampling adequacy for factor analysis. Kaiser-Guttman's criteria and Hull's method indicated a three-factor solution, while parallel analysis suggested a two-factor solution. All items showed salient loadings, with two items exhibiting cross-loading. Positive but weak correlations were found between EDI factors 1 and 2 and nature relatedness. Conclusions The validated scale showed solid psychometric properties, with potential differences in factor structure in relation to the English version. Considering validation is an ongoing process, it is recommended that studies be conducted comparing ego dissolution scores across distinct substances and different regions of the country.

Preparation and in vitro dissolution behaviors evaluation of silymarin phospholipid complex / 药学实践杂志

Objective To prepare silymarin phospholipids complex（SM-PC） and investigate its physicochemical properties. Methods On the basis of single-factor tests, the drug-lipid ratio, drug concentration and reaction temperature were selected as the factors of the central composite design and response surface methodology in the preparation of SM-PC by solvent volatilization, and the best process was optimized with the compound rate as the index. And its in vitro dissolution was measured. Results The optimum preparation technology of SM-PC was as follows: acetone was used as compound solvent, the concentration of SM was 8.0 mg/ml, the mass ratio of SM to phospholipid was 1∶1.8, the reaction temperature was 56 ℃ and the recombination rate was（95.15±1.55）% with deviation of less than 3%. The in vitro dissolution test showed that the dissolution of SM-PC was close to 90% in 60 min. The dissolution behavior of main component of silybin was similar to that of silymarin capsules（Legalon ®）, which was higher than SM-API. Conclusion SM-PC was successfully prepared by central composite design response surface method, which significantly improved the dissolution and laid a foundation for the study of subsequent preparations.

"Fui Eu Que Pedi": A Perspectiva de Crianças e Adolescentes Sobre a Dissolução da Adoção / "I Asked For It": The Perspective of Children and Adolescents on the Dissolution of Adoption

Ainda que não exista previsão legal, crianças e adolescentes vivenciam o processo de dissolução da adoção. Na literatura, a vivência subjetiva de crianças e adolescentes frente ao fenômeno tem sido pouco abordada. O presente estudo objetivou conhecer as vivências de crianças e adolescentes que retornaram ao acolhimento após a adoção, além de compreender sua percepção sobre família e as expectativas sobre o futuro. Realizou-se uma pesquisa qualitativa exploratória com três crianças e uma adolescente em uma instituição de acolhimento da região metropolitana de Porto Alegre/RS. Os dados obtidos em entrevistas semiestruturadas e hora do jogo foram examinados por meio de análise temática. Os resultados foram agrupados em quatro temáticas: 1) concepções de família; 2) experiência de adoção; 3) experiências de retorno ao acolhimento; 4) perspectivas de futuro. Identificou-se que as crianças idealizam a família nuclear, amorosa, e avaliam que a decisão de retorno para o acolhimento foi delas, embora suas perspectivas de futuro sejam centradas na expectativa de uma nova adoção. Constatou-se que a experiência de adoção e retorno para o acolhimento é permeada de sofrimento, o que demanda a criação de políticas públicas de atenção a crianças e adolescentes nesse contexto.

Although there is no legal provision, children and adolescents experience the process of adoption dissolution. In the literature, little is discussed about the subjective experience of children and adolescents who face this experience. The present study aimed at investigating the experiences of children and adolescents who returned to the foster care system after being adopted and understanding their perceptions about family and future expectations. An exploratory qualitative study was carried out with three children and one teenager in a foster care institution located in the metropolitan area of Porto Alegre/RS. The data obtained from semi-structured interviews and play were examined through thematic analysis. The results were grouped into four themes: 1) conceptions of family; 2) adoption experience; 3) experiences of returning to the foster system; 4) expectations for the future. It was identified that the children idealize the nuclear and loving family, and thought of their return to the system as their own decision, although their future expectations revolve around being adopted again. It was found that the experience of adoption and subsequent return to the foster system is marked by suffering, which demands the implementation of public policies for the care of children and adolescents in this context.

Efficacy of Chlorine Dioxide as an Endodontic Irrigant for Pulp Dissolution in vitro

Determine the efficacy of 5 % chlorine dioxide as an endodontic irrigant for pulp dissolution. Thirty five samples of human dental pulp were obtained, previously weighed and immersed in three solutions= 5 % ClO 2, 5.25 % NaOCl and saline (control group), for 10 minutes at 32 ºC; they were dried and reweighed. Then the weight loss was compared to the original weight and analyzed statistically. 5.25 % NaOCl and 5 % ClO 2 dissolved the dental pulp samples more effectively than saline (p> 0.001). No statistically significant difference was found between the tissue dissolving proper ties of 5.25 % NaOCl and 5 % ClO2 (p=0.893). 5 % ClO2 is effective in dissolving human dental pulp tissue.

El objetivo de este estudio fue determinar la eficacia del dióxido de cloro al 5 % como irrigante endodóntico para la disolución pulpar. Se obtuvieron 35 muestras de pulpa dental humana, se pesaron previamente y se sumergieron en tres soluciones= 5 % ClO2, 5.25 % NaOCl y suero fisiológico (grupo control), durante 10 minutos a 32ºC; se secaron y se pesaron de nuevo. Luego se comparó la pérdida de peso del peso original y se analizó estadísticamente. NaOCl al 5.25 % y ClO2 al 5 % disolvieron las muestras de pulpa dental con más eficacia que el suero fisiológico (p> 0.001). No se encontró diferencias estadísticamente significativas entre las propiedades de disolución de tejido de NaOCl al 5.25 % y ClO2 al 5 % (p=0.893) ClO2 al 5 % es eficaz para disolver tejido de pulpa dental humana.

Formulation and evaluation of Buccal mucoadhesive tablets of diclofenac sodium using 23 factorial designs

Buccal tablets

Diclofenac sodium

Drug release

Mucoadhesion

Mucoadhesive tablets

Release kinetics

Effect of tert-butyl acetate and ethyl butyrate on the dissolution of gallbladder cholesterol stones / 中华肝胆外科杂志

Objective:To compare the effect and biotoxicity of tert-butyl acetate (TBA) and ethyl butyrate (EB) on stone dissolution in vitro.Methods:Ten gallstone samples from patients with multiple gallbladder stones were selected and the cholesterol content was analyzed by HPLC. Stone dissolution tests of TBA and EB were performed on cholesterol gallstone in vitro, and the weight of stone at each time point was recorded, meanwhile, methyl tert-butyl ether (MTBE) was used as the control. The inhibitory effects of MTBE, TBA and EB on proliferation of human normal liver cell line LO2 were analyzed by cell proliferation inhibition assay. Flow cytometry was used to analyze the effects of MTBE, TBA and EB on the early and late apoptosis of LO2 cells, and the changes of reactive oxygen species level in LO2 cells were also analyzed.Results:Of the 10 gallbladder gallstones, 6 were cholesterol gallstones and 4 were non-cholesterol gallstones. Stone dissolution experiment showed that the remaining stones of MTBE, TBA and EB groups were (47.83±3.84)%, (58.12±4.53)% and (75.75±4.61)% 30 minutes later. The remaining stones were (18.38±6.47)%, (33.82±6.22)% and (56.38±3.91)% 90 minutes later. MTBE had the best stone dissolution effect in vitro, the stone dissolution effect of TBA was slightly weaker than MTBE, and the stone dissolution effect of EB was relatively weak in all ( P<0.05). The cell proliferation inhibition experiment showed that the cell viability of the control group, MTBE group and TBA group were (100.00±4.46)%, (96.79±4.32)% and (93.72±3.51)%, respectively, and there were no significant differences among the three groups ( P>0.05). However, the cell viability of EB group (87.57±5.29)% was lower than the above three groups, and the differences were statistically significant ( P<0.001). The early apoptosis and late apoptosis of the control group were (1.67±0.15)% and (1.27±0.06)%, respectively. EB induced early apoptosis (15.90±0.53)% ( P<0.001) and late apoptosis (5.13±0.76)% ( P<0.05). However, MTBE and TBA had no significant effect on cell apoptosis ( P>0.05). Compared with control group, MTBE, TBA and EB all significantly inhibited the level of reactive oxygen species ( P<0.05), and the inhibitory effect of EB was the most obvious. Conclusions:TBA has good stone dissolution effect and biosafety for gallbladder cholesterol stones in vitro, while EB has relatively poor performance. TBA is a potential drug for gallstone dissolution.

3D Raman mapping as an analytical tool for investigating the coatings of coated drug particles / 药物分析学报

The properties of dry-coated paracetamol particles(fast-dissolving model drug)with carnauba wax particles as the coating agent(dissolution retardant)were investigated.Raman mapping technique was used to non-destructively examine the thickness and homogeneity of coated particles.The results showed that the wax existed in two forms on the surface of the paracetamol particles,forming a porous coating layer:i)whole wax particles on the surface of paracetamol and glued together with other wax surface particles,and ii)deformed wax particles spread on the surface.Regardless of the final particle size fraction(between 100 and 800 μm),the coating thickness had high variability,with average thickness of 5.9±4.2 μm.The ability of carnauba wax to decrease the dissolution rate of paracetamol was confirmed by dissolution of powder and tablet formulations.The dissolution was slower for larger coated particles.Tableting further reduced the dissolution rate,clearly indicating the impact of subsequent formulation processes on the final quality of the product.

Advantage analysis of flow-through cell method in quality evaluation of Chinese patent medicine: a case study of Danshen Tablets / 中国中药杂志

To explore the quality consistency evaluation method for multi-component traditional Chinese medicine and establish a dissolution evaluation method suitable for the characteristics of multi-component Chinese patent medicine, this study discussed the characteristics and advantages of the flow-through cell method in the dissolution evaluation of Chinese patent medicine by comparing the impact of the small cup method and the flow-through cell method on the dissolution behavior of water-soluble and lipid-soluble major active components of Danshen Tablets. Dissolution tests were performed using the small cup method as described in the 2020 edition of the Chinese Pharmacopoeia and the newly introduced flow-through cell method(closed-loop method) with water solution containing 0.5% SDS as dissolution medium. Cumulative dissolution curves of the water-soluble component salvianolic acid B and the lipid-soluble component tanshinone Ⅱ_A in Danshen Tablets were plotted, and fitting and similarity analysis of the dissolution models was conducted to identify the characteristics and advantages of the flow-through cell method. For the small cup method, 150 mL of water containing 0.5% SDS was used as the dissolution medium, with a rotation speed of 75 r·min~(-1) and a temperature of(37±0.5) ℃, and 3 mL of samples were taken at 15, 30 min, 1, 2, and 4 h, with fresh dissolution medium added at the same temperature and volume. For the flow-through cell method, a closed-loop system was used. Danshen Tablets were placed in the flow-through cell with approximately 6.7 g of glass beads, and 150 mL of water containing 0.5% SDS was used as the dissolution medium. The flow rate was set at 20 mL·min~(-1), and the temperature and sampling were the same as the small cup method. The results showed that compared with the small cup method, the flow-through cell method had stronger discriminative power and higher sensitivity in distinguishing the dissolution behavior of the two components, and could better reflect the differences in formulation quality, especially for water-insoluble lipid-soluble components. Given that there were no essential differences in the in vitro release kinetics between the two methods, the flow-through cell method could not only replace the traditional small cup method but also better guide the formulation development and identify quality issues of formulations.

Analysis of the effect of in vitro dissolution on the pharmacokinetics of albendazole

Abstract Albendazole is an anthelmintic drug commonly used in parenchymal neurocysticercosis and cystic echinococcosis. The aim of this study was to explore whether disparities in the dissolution profiles of albendazole products lead to significant differences in pharmacokinetic parameters. Three generic products and the innovator were evaluated in vitro. Quality control tests were performed, and dissolution profiles were obtained according to the Mexican Pharmacopeia. Although all products passed the quality control tests, none of the generic products complied with the similarity factor (f 2). The product with the lowest f 2 value in respect to the reference was chosen for in vivo evaluation. The study was carried out in 12 healthy volunteers who received 400 mg of the generic or reference product according to a crossover design. No significant differences were found in Cmax and AUC for albendazole and its main metabolite, albendazole sulfoxide, between products. Two absorption peaks were observed in the pharmacokinetic profile, and a population (22%) with different absorption rates and delay time for the the second peak was found. Based on the results, due to the high variability in the absorption process the differences observed in vitro could not be observed in vivo.

Development and evaluation of wafer loaded with sertaconazole solid dispersion for the treatment of oral candidiasis

Abstract Candidiasis is one of the most common fungal infections of oral cavity in humans, causing great oral discomfort, pain and aversion to food. To develop more effective antifungal systems for the treatment of oral candidiasis, an oral mucoadhesive wafer containing sertaconazole solid dispersion (STZ-SD) was developed in this study. Dispersion of STZ in Soluplus® as a solubility enhancement excipient was done by melting, solvent evaporation and freeze drying method at various STZ to Soluplus® ratios. The optimized STZ-SD was then incorporated in the sodium carboxymethyl cellulose (SCMC) gel, xanthan gum gel, or their combination to prepare the lyophilized wafers. The swelling capacity, porosity, and mechanical, release and mucoadhesive properties of the wafers, together with their antifungal activity, were then evaluated. The melting method sample with the ratio of 8:1 showed the best results in terms of saturation solubility and dissolution rate. The STZ-SD-composite wafer exhibited higher hardness and mucoadhesion, as compared to those made of the SCMC polymer. The STZ-SD-wafer also exhibited a greater antifungal effect when compared to the STZ-wafer. The present study, thus, suggested that the STZ-SD-wafer could serve as a novel effective delivery system for oral candidiasis treatment.

Interchangeability of medications and biopharmaceutical implication of taking drugs with fluids other than water: ibuprofen case study

Abstract The aim of this study was to compare the dissolution properties of ibuprofen solid oral dosage forms commercially available in Bosnia and Herzegovina and to estimate the influence of dissolution medium composition on the drug release. Eight products (A-H) were subjected to in vitro dissolution test using experimental conditions described in USP42-NF37. Dissolution properties of one selected product were examined in the presence of alcohol (22.2% v/v) and fruit juice (22.2% v/v). Products marked B-H complied with the pharmacopeial criteria. Dissolution profile of product B was similar with dissolution profiles of products D, E, F and G and similarity was also found between products A-D, C-G, D-G and E-F. Drug release from most of the examined preparations fitted best to the Weibull kinetic model. In the presence of alcohol in the medium, higher amount of ibuprofen was dissolved. Contrary, ibuprofen dissolved in the presence of fruit juice was significantly lower. Differences in the dissolution profiles of investigated preparations suggest that their interchangeability should be additionally considered and demonstrated with in vivo bioequivalence studies. Presence of different substances in the medium can affect dissolution properties of ibuprofen, emphasizing the importance of the patient's compliance.

Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines(Ⅲ): classification of granule dissolving behaviors / 中国中药杂志

Solubility is an important sensory quality attribute of traditional Chinese medicine(TCM) granules. In this paper, 90 batches of granules(30 batches of TCM formula granules, 30 batches of Chinese patent medicine granules and 30 batches of Japanese Kampo granules) were used as the research objects. The turbidity sensor was used to characterize the turbidity curve of the granule dissolution process. The classification system of granule dissolution behaviors was constructed from three dimensions: dissolution degree, equilibrium time, and dissolution mechanism. According to the equilibrium time, the granule dissolution rates were divided into three categories : faster(<100 s), general(101-300 s) and slow(>301 s). According to the turbidity curve profile, the granule dissolution mechanisms were classified into dissolution-controlled type(α-type), dispersion-controlled type(β-type), and dispersion-controlled type followed by dissolution-controlled type(γ-type). The proportion of TCM formula granules, Chinese patent medicine granules and Japanese Kampo granules with complete dissolution or slight turbidity at the end of dissolution was 46.7%, 96.7%, and 10.0%. The proportion of TCM formula granules, Chinese patent medicine granules, and Japanese Kampo granules with faster dissolution rates(<100 s) was 23.3%, 26.7%, and 40.0%. The average dissolution rate of Japanese Kampo granules was faster than that of TCM formula granules, and it was slightly faster than the average dissolution rate of Chinese patent medicine granules. The dissolution mechanism of Chinese patent medicine granules was mainly α-type, while that of Japanese Kampo granules was mainly β-type, and the three types of dissolution mechanisms of TCM formula granules accounted for a relatively average. The purpose of improving the solubility and dispersion of granules can be achieved by combining the comprehensive application of various functional excipients with the small dosage of Japanese Kampo granules and the wide addition scope of excipients. In the process of transforming TCM compound prescriptions into formulas, there is still much room for innovation in formula excipients and process optimization.

Dissolution behavior of aripiprazole tablets based on near infrared spectroscopy / 药学实践杂志

Objective To establish a near infrared (NIR) quantitative model for the dissolution behavior of aripiprazole tablets. Methods The NIR spectra of aripiprazole tablets were collected and the dissolution tests were performed to determine the dissolution of each tablet at 3, 6, 9, 12, 15 and 30 min. The near infrared spectra regions of 4 000.00-4 396.90, 5 326.43-12 000.00 cm−1 were pretreated by Savitzky-Golay smoothing filter, and the dissolution behavior model was established by partial least squares method. Results The root mean square error of calibration (RMSEC) and the root mean square error of prediction (RMSEP) at different time points were analyzed. RMSEP was lower than 8%. The calibration correlation coefficient (RC) and the prediction correlation coefficient (RP) at different time points were above 0.95 (except for the point of 6 min). There was a good correlation between the NIR spectrum and the dissolution at each time point. Conclusion NIR spectroscopy could predict the dissolution behavior of aripiprazole tablets, which lays a foundation for online quality monitoring of tablets by NIR spectroscopy.

Memoirs of yesterday: The lived experience of individuals with separated parents

@#Separation issues have been rampant, and a significant rise in union dissolution cases in the Philippines has been observed. This certain occurrence should be given particular attention because it may alter the individual's way of living, particularly in perceiving and dealing with relationships. This study explores the lived experience of individuals who have undergone parental separation. The study utilized a Hermeneutic Phenomenological Design, which involved ten (10) respondents using a semi-structured key informant interview guide. The respondents were selected based on criteria as follows: (1) Have parents who have decided on the dissolution of marriage (annulled or informal) living separately; (2) 18 years of age and above; (3) Residents of Central Visayas; permanent or transient in Cebu City and; (4) Able to understand and express ideas in Cebuano dialect or English language. An Interpretative Phenomenological Analysis anchored on van Manen's six-step interpretive phenomenological approach with management and analysis done manually created a poem titled “Memoirs of Yesterday,” which incorporates three (3) major themes: (1) Into the Tunnel: Etiology of Separation, (2) The Darkness in the Tunnel: effects of the dissolution of marriage to children- emotional, psychological and academic status and (3) The Light After the Tunnel: attitude of the child and parent towards relationships and separation. The study implies that nurses should recognize the importance of assessing family concerns in rendering holistic and individualized client care. Thus, nurses should use assessed needs in advocating for the creation of more programs on awareness and counseling to families and, most especially, children.

Crystallization transformation of amorphous extracts of traditional Chinese medicine and its effect on dissolution behavior — Taking total flavonoids from Pueraria lobata as an example / 中国药科大学学报

@#In order to guarantee the quality of traditional Chinese medicines (TCMs), the crystallization transformation of complex extracts of TCMs and the influence of solid form on their physicochemical properties were studied.The extract of total flavonoids from Pueraria lobata was taken as a model.Crystallization transformation happened when lofting under different conditions, and the intrinsic dissolution tests were carried out.It was found that humidity was the key factor to induce crystallization of total flavonoids from Pueraria lobata.The greater the wettability was, the more the crystallization was.The dissolution rate of total flavonoids from Pueraria lobata with the most crystallization amount significantly decreased by 96.51% compared to the sample without crystallization.After further simulating the preparation process of total flavonoids from Pueraria lobata, it was found that the wet granulation process with introduced water would also lead to crystallization and reduced dissolution rate.As for all crystallization samples, there was an inversely proportional relationship between the dissolution rates and the amount of crystallization.The risk of crystallization existed both in the storage and preparation process of TCM extracts.Crystallization would significantly affect the dissolution rate, and thus the quality of TCM products.In this study, the crystallization transformation of amorphous complex TCM extracts was discovered, and the effect of the crystallization transformation on its dissolution behavior was systematically studied, which provides a new research idea for assuring the quality of TCM products and promoting the improvement of TCM preparation level.

Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines (Ⅱ): classification of tablets disintegration behavior / 中国中药杂志

In this paper, 50 batches of representative traditional Chinese medicine tablets were selected and the disintegration time was examined with the method in Chinese Pharmacopoeia. The disintegration time and disintegration phenomenon were recorded, and the dissolution behaviors of water-soluble and ultraviolet-absorbent components during the disintegration process of tablets were characterized by self-control method. The results revealed that coating type and raw material type influenced the disintegration time of tablets. It was found that only 4% of traditional Chinese medicine tablets had obvious fragmentation during the disintegration process, while 96% of traditional Chinese medicine tablets showed gradual dissolution or dispersion. Furthermore, according to the disintegration speed, disintegration phenomenon, and whether the cumulative dissolution of measured components was > 90% at complete disintegration, a disintegration behavior classification system(DBCS) was created for the regular-release traditional Chinese medicine tablets. As a result, the disintegration behaviors of 50 batches of traditional Chinese medicine tablets were classified into four categories, i.e. ⅠA_2, ⅠB_1, ⅡB_1, and ⅡB_2. traditional Chinese medicine tablets(Class I) with disintegration time ≤ 30 min were defined to be rapid in disintegration, which can be the objective of optimization or improvement of Chinese herbal extract(semi extract) tablets. Different drug release models were used to fit the dissolution curve of traditional Chinese medicine tablets with gradual dissolution or dispersion phenomenon(i.e. Type B tablets). The results showed that the dissolution curves of water-soluble components in the disintegration process conformed to the zero order kinetics and the Ritger-Peppas model. It could be inferred that the disintegration mechanisms of type B tablets were a combination of dissolution controlled and swelling controlled mechanisms. This study contributes to understanding the disintegration behavior of traditional Chinese medicine tablets, and provides a reference for the design and improvement of disintegration performance of traditional Chinese medicine tablets.

Caracterización fisicoquímica y evaluación in vitro de sistemas autoemulsionables de liberación de indometacina

Objetivo: incorporar la indometacina en sistemas autoemulsionables de liberación con la finalidad de aumentar su solubilidad en medio acuoso, la velocidad de disolución y permeación in vitro. Metodología: se llevaron a cabo ensayos de solubilidad al equilibrio para preparar formulaciones con los excipientes, en los cuales la indome-tacina presentó mayor incremento de solubilidad; los sistemas fueron caracterizados por medio del tiempo de autoemulsificación, estabilidad física, tamaño de partícula, potencial zeta, perfiles de disolución y permeación a través de membrana sintética. Resultados: el diseño experimental de los sistemas autoemulsionables de liberación permitió crear formulaciones que aumentaron la solubilidad de la indometacina en un orden de 105 veces con respecto a la solubilidad acuosa. Las formulaciones que resultaron viables presentaron tiempos de autoemulsificación menores que 60 segundos, además, las distribuciones de tamaño de partícula de las dispersiones fueron inferiores a los 300 nm, presentó índices de polidispersión inferiores a 0,3 y valores de potencial zeta menores de -25 mV. Los perfiles de disolución mostraron que las formulaciones cumplen con un valor de factor de similitud mayor que 50, además, la permeabilidad a través de membrana sintética es mayor para las formulaciones autoemulsionables que el producto de referencia. Conclusiones: la formulación de indometacina en sistemas autoemulsionables de liberación incrementa la solubilidad en medio acuoso, aumenta la disolución y liberación. Estos resultados sugieren que la administración oral de indometacina incorporada en sistemas autoe-mulsionables puede acelerar el inicio del efecto farmacológico.

SUMMARY Aim: To load indomethacin into self-emulsifying delivery systems in order to increase, water-solubility, rate dissolution and in vitro permeation. Methodology: Equilibrium solubility tests were carried out to prepare formulations with the excipients, in which indomethacin presented a greater increase in solubility; the systems were characterized by self-emulsification time, physical stability, particle size, zeta potential, dissolution profiles and permeation through synthetic membrane. Results: The experimental design of self-emulsifying delivery systems allowed to create formulations that increase the solubility of indomethacin in an order of 105 times with respect to the aqueous solubility. The feasible formulations presented autoemulsification times less than 60 seconds, in addition, the particle size distributions of the dispersions were less than 300 nm, with polydispersity index smaller than 0.3, and zeta potential values lower than -25 mV. The dissolution profiles showed that the formulations comply with a similarity factor value greater than 50, in addition, the permeability through a synthetic membrane is higher for the self-emulsifying formulations than the reference product. Conclusion: The formulation of indomethacin into self-emulsifying delivery systems enhances the solubility in aqueous medium, increases dissolution and accelerate release. These results suggest that the oral administration of indomethacin incorporated into self-emulsifying delivery systems can accelerate the onset of the pharmacological effect.

Objetivo: incorporar a indometacina em sistemas de liberação autoemulsificantes a fim de aumentar sua solubilidade em meio aquoso, a taxa de dissolução e permeação in vitro. Metodologia: foram realizados testes de solubilidade de equilíbrio para preparar formulações com os excipientes, nas quais a indometacina apresentou maior aumento na solubilidade; os sistemas foram caracterizados quanto ao tempo de autoemulsificação, estabilidade física, tamanho de partícula, potencial zeta, perfis de dissolução e permeação através de membrana sintética. Resultados: o desenho experimental dos sistemas de liberação autoemulsificantes permitiu a criação de formulações que aumentaram a solubilidade da indometacina na ordem de 105 vezes em relação à solubilidade aquosa. As formulações que se mostraram viáveis apresentaram tempos de autoemulsificação inferiores a 60 segundos, além disso, as distribuições granulométricas das dispersões foram inferiores a 300 nm, apresentaram índices de polidispersidade inferiores a 0,3 e valores de potencial zeta inferiores a -25 mV. Os perfis de dissolução mostraram que as formulações atendem a um valor de fator de similaridade maior que 50, além disso, a permeabilidade através da membrana sintética é maior para as formulações autoemulsionantes do que para o produto de referência. Conclusões: a formulação de indometacina em sistemas de liberação autoemulsificantes aumenta a solubilidade em meio aquoso, aumenta a dissolução e a liberação. Esses resultados sugerem que a administração oral de indometacina incorporada em sistemas autoemulsificantes pode acelerar o início do efeito farmacológico.

Recent progress on dissolution and absorption of amorphous solid dispersions / 药学学报

The amorphous solid dispersion is one of the most effective formulation approaches to enhance the oral bioavailability of poorly water-soluble drugs. However, the amorphous drugs tend to crystallize during storage or dissolution due to inadequate formulations, preparation techniques, storage and dissolution conditions, thus negating their advantages. Meanwhile, it is often difficult to establish in vitro-in vivo correlation for amorphous solid dispersions owing to the difference between dissolution media and physiological environments and between the apparent concentration and membrane transport flux, the dynamic process of the in vivo absorption, which put great challenges to the development of amorphous solid dispersion products. This review covers the recent progress on the mechanistic study of the in vitro dissolution and in vivo absorption of amorphous solid dispersions, aiming to provide guidance for the formulation development of poorly soluble drugs.

Efavirenz dissolution enhancement V - A combined top down/bottom up approach on nanocrystals formulation

Abstract Efavirenz is one of the most commonly used drugs in HIV therapy. However the low water solubility tends to result in low bioavailability. Drug nanocrystals, should enhance the dissolution and consequently bioavailability. The aim of the present study was to obtain EFV nanocrystals prepared by an antisolvent technique and to further observe possible effect, on the resulting material, due to altering crystallization parameters. A solution containing EFV and a suitable solvent was added to an aqueous solution of particle stabilizers, under high shear agitation. Experimental conditions such as solvent/antisolvent ratio; drug load; solvent supersaturation; change of stabilizer; addition of milling step and solvents of different polarities were evaluated. Suspensions were characterized by particle size and zeta potential. After freeze- dried and the resulting powder was characterized by PXRD, infrared spectroscopy and SEM. Also dissolution profiles were obtained. Many alterations were not effective for enhancing EFV dissolution; some changes did not even produced nanosuspensions while other generated a different solid phase from the polymorph of raw material. Nevertheless reducing EFV load produced enhancement on dissolution profile. The most important modification was adding a milling step after precipitation. The resulting suspension was more uniform and the powder presented grater enhancement of dissolution efficacy.