RESUMO
Objective To explore the distributions of dose differences and their correlations with tumor types in independent three-dimensional dose verification for intensity-modulated radiotherapy(IMRT)plan,and to establish prediction models.Methods The fixed field IMRT plans of 180 patients with head and neck,chest,and abdominal tumors were collected.Independent sample t-test was used to analyze the consistency between the initial dose calculated in treatment planning system and the verified dose for evaluating the feasibility of independent validation.The distributions of planning target volume(PTV)dose differences among different tumor types were analyzed.The correlations of PTV dose differences with conformity index(CI)and homogeneity index were analyzed using correlation analysis and multiple linear regression method.Results The PTV dose differences for head and neck,chest,and abdominal tumors were within±1.2%,and the average 3%/3 mm gamma passing rate between the initial dose and the verified dose was higher than 99.5%,indicating good consistency in dose distribution between independent validation and treatment planning system.The distributions of PTV dose differences were different in head and neck,chest,and abdominal plans,and were significantly correlated with CI which could be used to preliminarily determine the PTV dose differences in independent validation.The multiple regression equation based on CI and homogeneity index could be used to estimate the dose verification differences of IMRT plan.Conclusion Independent verification can quickly achieve pre-treatment validation for radiotherapy plans,improving the efficiency of quality control of radiotherapy plans.The estimation based on dose differences provides guidance for optimizing radiotherapy plans.
RESUMO
To summarize the progress in BNCT dose verification method in the world and discusses their development prospects. Boron neutron capture therapy (BNCT) utilizes the specific capture reaction between the neutrons and boron drugs enriched in tumor cells to selectively kill tumor cells. In order to verify the accuracy of the radiotherapy plan and ensure the therapeutic effect on patients, it is necessary to measure the dose before treatment and compare the experimental radiation dose with the planned dose. The current BNCT dose measurement method mainly include point dose measurement method based on ionization chambers, thermoluminescence dosimeters and activation foils, two-dimensional dose measurement method based on films, and three-dimensional dose measurement method based on gel dosimeters.
RESUMO
Objective:To explore the clinical application of the electronic portal imaging device (EPID) based on the linear accelerator produced by Shanghai United Imaging Healthcare Co., Ltd. (UIH) to in vivo dose verification. Methods:A total of 68 patients (32 cases with head and neck tumors, 16 cases with chest tumors, and 20 cases with abdomen and pelvis tumors) who were treated with volumetric modulated arc therapy (VMAT) in the Henan Provincial People′s Hospital were selected in this study. Each patient underwent the pre-treatment dose verification using an Arccheck device (Pre Arccheck), the pre-treatment dose verification using an EPID (Pre EPID), and the in vivo dose verification using an EPID (In vivo EPID). Moreover, the position verification based on fan beam computed tomography (FBCT) was also performed for each patient in the first three treatments and then once a week. The patients were treated when the setup error in any direction ( x: left-right, y: head-foot, z: vertical) was less than 3 mm; otherwise, position correction would be conducted. The three-dimensional setup deviation d was calculated according to setup errors x, y, and z. Results:The γ passing rates of dose verifications Pre EPID and In vivo EPID of 68 patients were (99.97±0.1)% and (94.15±3.84)%, respectively, significantly different from that (98.86±1.48)% of the Pre Arccheck dose verification ( t = -6.12, 9.43; P < 0.05). The γ passing rates of the chest, abdomen and pelvis, and head and neck in the In vivo EPID dose verification showed no significant differences ( P > 0.05). The difference in the γ passing rates (5.56±3.72)% between dose verifications Pre EPID and first In vivo EPID was unrelated to the three-dimensional setup deviation d (1.46±1.51 mm) ( P > 0.05). As the treatment proceeded, the γ passing rate of In vivo EPID gradually decreased from (94.15±3.84)% in the first week to (92.15±3.24)% in the fifth week. From the third week to the fifth week, the γ passing rates of In vivo EPID were significantly different from those in the first week ( t = 2.48, 2.75, 3.09, P < 0.05). Conclusions:The setup errors within 3 mm do not affect the γ passing rate of in vivo dose verification. The clinically acceptable threshold for the γ passing rate of in vivo EPID needs to be further determined. In addition, in vivo dose verification can support the clinical application of adaptive radiotherapy to a certain extent.
RESUMO
Objective:To explore the value of using the mean gamma index (GI) in targer area receiving 50% prescribed dose as reference in VMAT planned dose verification through model-based dose calculation and measurement-based dose reconstruction.Methods:Based on Compass dose verificantion system, the VMAT plans for 70 patients were validated using two method. The mean GI and passing rate in target area receiving 50% of prescribed dose area for each validation plan were obtained to evaluate its application value in dose validation. First, plan information obtained by TPS calculation was input into the Compass system for performing independent dose calculation based on the accelerator data model, and obtain a three-dimensional dose based on the independent model calculation. The planned fluence measured for each patient′s treatment plan on the accelerator was reconstructed through the Compass system to obtain a three-dimensional dose based on measurement reconstruction. The three-dimensional dose obtained by the two method were compared with the three-dimensional dose calculated by TPS.Results:Combined with the gamma criteria of 3%/3 mm in the error setting condition of GI analysis, the mean GI in the area receiving 50% of prescribed dose was evaluated. GI≤0.4 was classified as PASS, 0.4 < GI ≤ 0.6 as being clinically acceptable, and GI > 0.6 as FAIL. The VMAT planned dose verification for 70 patients showed that the model-based independent calculation was in a better agreement with the TPS calculation. The GI values were all < 0.6: GI≤0.4 for 67 patients and 0.4 <GI≤ 0.6 for the other 3 patients, with gamma passing rate larger than 92%. The in- vivo measurement-based reconstructed 3D dose are slightly lesser than the model-based planed result ; theGI values were all < 0.6: GI ≤0.4 for 35 patients and 0.4 < GI ≤ 0.6 for other 35 patients, with gamma pass rate larger than 88%, of which gamma passing rate > 90% for 88 patients and < 90% for other 2, all meeting the requirements of clinical dose verification. The model-based independent dose verification is better than the measurement-based reconstructed dose verificantion, and the difference is statistically significant ( t=15.20, 10.71, P < 0.05). Conclusions:The mean GI in target area receiving 50% of prescribed dose can be used as a reference to judge the operatability of clinical plan in clinical dose verification. The mean GI value, in combination with the comprehensive result of gamma passing rate, is more convincing to evaluate dose verification. A combination of model-based dose verification, despite time-saving and labor-saving, and the measurement-based dose verification could become a reliable dose verification method for clinical application.
RESUMO
Objective:To explore the feasibility of applying an ArcCHECK detector to the dose verification for ultra-long target volumes of cervical cancer.Methods:This study retrospectively selected patients suffering from cervical cancer with ultra-long target volumes (lengths: ≥ 26 cm; 50 cases; the ultra-long target volume group) and conventional target volumes (lengths: < 26 cm; 50 cases; the conventional target volume group). Subsequently, this study designed treatment plans using the Volumetric Modulated Arc Therapy (VMAT) technique and then collected and verified doses using an ArcCHECK detector. The dose detection for the conventional target volume group was performed at the central point of the detector (marked by iso and Short-0 cm). Then, the detector was moved for 5 cm along the bed exit direction (marked by iso 1), followed by the dose verification of the ultra-long target volume group (marked by Long-5 cm) and conventional target volume group (marked by Short-5 cm). The geometric parameters (the length and volume of a target volume), mechanical parameters (machine hop count and the duration of irradiation), and gamma pass rates (GPRs) under different detection conditions of each group were analyzed.Results:The target lengths, target volumes, machine hop counts, and irradiation durations of the ultra-long target group were higher than those of the conventional target group ( t = 2.61-18.56, P < 0.05). For the conventional target group, the GPRs at iso 1 were significantly lower than those at iso ( t = 2.14-8.17, P < 0.05). Meanwhile, the GPRs at iso 1 of the ultra-long target volume group were significantly lower than those of the conventional target volume group ( t = -4.70 to -2.73, P < 0.01). The GPRs of each group met clinical requirements for criteria of both 3%/3 mm and 3%/2 mm. Conclusions:The deviation of the positioning center and the length of the target volume serve as primary factors affecting the dose verification result of cervical cancer. For ultra-long target volumes, dose verification can be performed by moving the positioning center, thus ensuring treatment accuracy for cervical cancer patients.
RESUMO
Objective:To analyze the correlation between the monitor units and pass rate of plan dose verification in the volumetric intensity modulated arc therapy (VMAT) plan.Methods:VMAT plans for 20 patients with nasopharyngeal carcinoma (NPC) and 30 patients with cervical cancer who underwent radiotherapy at Liuzhou Workers' Hospital from January to October 2020 were retrospectively chosen. The Detector 1500 array and Octavius 4D phantom from German PTW company were used for dose measurement. The pass rates of dose verification of relevant plans were analyzed under the conditions of 3%/2 mm and 2%/2 mm. The correlation between the monitor units and pass rate of plan dose verification in VMAT plans was assessed by Pearson's bivariate correlation analysis.Results:Under the condition of 3%/2 mm, the correlation coefficients between the monitor units and gamma pass rate were -0.873 ( P<0.001), -0.800 ( P<0.001), -0.781 ( P<0.001), -0.493 ( P=0.006) for NPC_1Arc, NPC_2Arc, NPC_1Arc+NPC_2Arc and Cervix_2Arc, respectively. Under the condition of 2%/2 mm, the correlation coefficients between the monitor units and gamma pass rate were -0.842 ( P<0.001), -0.770 ( P<0.001), -0.748 ( P<0.001) and -0.531 ( P=0.003) for NPC_1Arc, NPC_2Arc, NPC_1Arc+NPC_2Arc and Cervix_2Arc, respectively. Conclusion:Significant negative correlation can be observed between the monitor units and plan dose verification pass rate in VMAT plan.
RESUMO
Advanced radiotherapy technology enables the dose to more accurately conform to the tumor target area of the patient, providing accurate treatment for the patient, but the gradient of the patient's radiation dose at the tumor edge is getting larger, which putting forward higher requirements for radiotherapy dose verification. The dose verification system software KylinRay-Dose4D can verify the patient's pre-treatment plan and the in vivo/on-line dose during the patient's treatment, providing important reference for the physicist to modify the radiotherapy plan and ensuring that the patient receives accurate treatment. This study introduces the overall design and key technologies of KylinRay-Dose4D, and tests the pre-treatment plan dose checking calculation and 2D/3D dose verification through clinical cases. The test results showed that the 2D/3D gamma pass rate (3 mm/3%) of KylinRay-Dose4D reconstructed dose compared with TPS plan dose and measured dose is larger than 95%, which indicating that the reconstructed dose of KylinRay-Dose4D meets the requirement of clinical application.
Assuntos
Humanos , Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por Computador/métodos , Radioterapia de Intensidade Modulada/métodos , Software , Neoplasias , Imagens de Fantasmas , Radiometria/métodosRESUMO
Objective:To explore the effect of oral contrast agent on the dose distribution and verification pass rate of radiotherapy plan when female patients with pelvic tumor underwent oral contrast agent to assist the delineations for tumors and organ at risk(OAR).Methods:A total of 15 female patients with pelvic tumor were selected.The original computed tomography(CT)images of each patient were the images with oral contrast agent.Based on these images,a 7-field static intensity-modulated radiotherapy plan was designed as plan 1.The intestinal CT values of the original images were modified to simulate the situations without oral contrast agent to obtain new images.The same optimization parameters of plan 1 was used to design a 7-field static intensity-modulated radiotherapy plan as plan 2.The two kinds of plans were normalized to a degree which 95%of volume was covered by 100%dose at the central point of target region.The 9 parameters of dose distribution included the maximum dose(Dmax),and two verification parameters were calculated as statistical method,and then,the effect of contrast agent was assessed.Results:The Dmax values of the target regions of plan 1 and plan 2 were respectively(5457.9±46.41)and(5455.8±46.33).The mean dose(Dmean)values of them were respectively(5185.4±24.39)and(5189.4±22.78).The conformity index(CI)values of them were respectively 1.03±0.03 and(1.03±0.03).The γ(3%/3 mm)pass rates of them were respectively(99.17±0.44)and(98.93±0.81)(P=0.177).The γ(2%/2 mm)pass rates of them were(95.46±1.27)and(94.88±1.87)(P=0.143).The differences of the dose and verification parameters between the designed two plans on the basis of the images with and without oral contrast agent were not statistical significance(P>0.05).Conclusion:Contrast agent does not have statistical effect on the dose distribution and verification pass rate of static intensity-modulated radiotherapy plan for female patients with pelvic tumor.
RESUMO
Objective:To investigate the factors affecting the accuracy of electronic portal imaging device (EPID)-based in vivo dose verification in radiotherapy for patients with lung and esophageal cancers, and to recommend the workflow and specifications for the application of the in vivo dose verification. Methods:This study randomly selected 32 patients who received radiotherapy for esophageal and lung cancers at the Department of Radiation Oncology, Jinhua Municipal Central Hospital from May to August 2022, including 14 lung cancer cases and 18 esophageal cancer cases. Using a uRT-linac 506c linear accelerator, these patients were treated according to the dynamic intensity-modulated radiotherapy (dIMRT) and EPID-based In vivo dose verification ( In vivo EPID) plans developed with the uRT-TPOIS planning system. The In vivo dose verification performed during the treatment included 238 fractions of In vivo EPID and 80 fractions of image-guided radiotherapy (IGRT) for the lung cancer cases, as well as 414 fractions of In vivo EPID and 105 fractions of IGRT for the esophageal cancer cases. The 2D γ passing rate for each irradiation field was obtained according to the set threshold value. Furthermore, fractioned irradiation fields with γ-passing rates below the threshold value were analyzed, and primary factors decreasing the γ-passing rate were further analyzed by combining the online CT images and 3D reconstruction-derived dose. Results:For lung and esophageal cancers, the mean γ-passing rates were 95.1% ± 5.7% and 96.5% ± 4.5%, respectively at 3 mm/5%; 91.5% ± 8.4% and 92.2% ± 4.9%, respectively at 3 mm/3%, and 79.1% ± 14.7% and 83.7% ± 8.2%, respectively at 2 mm/2%, indicating no statistically significant differences between two cancers ( P > 0.05). The average γ passing rate for beam orientations near 0°/180° (Group A) was higher than those near 90°/270° (Group B) 3 mm/5%: Z = -25.4, P < 0.05; 3 mm/3%: Z = -26.8, P < 0.05). The IGRT correction of setup errors significantly improved the γ passing rates (96.3% ± 5.1% and 96.4% ± 4.9%, respectively at 3 mm/5%, Z = -5.50, P < 0.05; 92.3% ± 8.0% and 91.3% ± 7.7%, respectively at 3 mm/3%, Z = -9.54, P < 0.05). The results of In vivo dose verification were affected by changes in the volumes and motion of tumors and normal tissues, radiotherapy positioning, and adequacy of pre-treatment preparation. Conclusions:EPID-based In vivo dose verification during radiotherapy can avoid incorrect irradiation. However, it is necessary to standardize the workflow of the EPID-based In vivo dose verification to avoid the decrease in the γ passing rate caused by artificial factors.
RESUMO
Objective:To explore the feasibility of StereoPhan (SP) phantoms and SRS MapCHECK (SMC) semiconductor matrices in the dose verification of HyperArc (HA) plans for patients with brain metastases (BM).Methods:A total of 16 BM patients who received HA radiotherapy in the Peking Union Medical College Hospital were enrolled in this study. The ion chamber and the SMC semiconductor matrix were inserted into SP phantoms, respectively. The point and planar doses in HA verification plans were measured and compared with the calculated data of the treatment planning system (TPS). The criteria for planar dose γ analysis were set at 2 mm/3%, 2 mm/2%, 1 mm/3%, and 1 mm/2%.Results:The mean deviation of point doses in 16 patients was 1.33%±0.84%. Based on the above criteria, the γ pass rates of planar doses were 99.72%±0.46%, 98.93%±1.32%, 98.85%±1.79%, and 97.13%±3.19%, respectively.Conclusions:SP phantoms and SMC semiconductor matrices are applicable to the dose verification of HA plans for BM patients. The analytical criteria of 3% and 1 mm/2% can be used for verifying point and planar doses, respectively.
RESUMO
Objective:To introduce the method and result of the modeling and preliminary dose verification of the treatment planning system used in the first domestic proton therapy device of China (Raystation 10B, a system of scientific research version with no available registration certificate) and to verify the modeling accuracy using dose verification result.Methods:The modeling method for a treatment planning system (TPS) mainly included the data acquisition and modeling of integrated depth dose (IDD) curves, the data acquisition and modeling of beam spot profiles in air, and the calibration and modeling of absolute dose by scanning a 10 cm ×10 cm square field with a spot spacing of 2.5 mm. By measuring the dose distributions in three cases with different complexity levels and comparing them with the dose distributions calculated using the TPS, this study verified and analyzed the modeling accuracy and proposed the requirements for beam parameters and the commissioning suggestions of the proton device.Results:The peak values of the IDD curves of low-energy regions fitted using the TPS model were less than the measured values, while those of medium- and high-energy regions fitted using the TPS model approximated the measured values. The range in all energy regions fitted accurately. For the three cases with different complexity levels, the deviation between the average dose calculated by the TPS and that measured was within ±5% (national standard for type tests of medical devices). Moreover, the DTA of high-dose-gradient areas was less than 3 mm.Conclusions:The modeling accuracy of the TPS generally meets the verification requirements. However, due to the low resolution of IDDs obtained by Monte Carlo simulation in the TPS model and the sharp Bragg peaks of low-energy regions, the IDD modeling accuracy of low-energy regions is insufficient.
RESUMO
@#<b>Objective</b> To conduct experimental analysis of clinical applicability of a homemade phantom which is equivalent to multiple tissue densities of human body. <b>Methods</b> Materials with densities close to bone, lung, cavity, and soft tissue were manufactured and combined to obtain a homemade in homogeneous phantom. The electron density of equivalent materials was compared with the organs. Ten lung cancer patients in our department were recruited for dose verification of intensity modulated radiation therapy in the homemade phantom and solid-water phantom. The two phantoms were compared for characteristics in dose verification, and the dosimetric differences of the homemade phantom between the calculated values on treatment planning systemand measured values were statistically analyzed by SPSS 21.0 software. <b>Results</b> In the dose verification, the gamma pass rates (3 mm/3%) were more than 90% using both the homemade phantom and solid-water phantom. The measured values in homemade phantom were larger than those in solid-water phantom, and the maximum deviation was 11.5%. The AD and RD values of gamma pass rate in dose verification showed no significant differences between the two phantoms (<i>P</i> > 0.05). <b>Conclusion</b> The homemade phantom meets the accuracy requirement of clinical application and can be used in dose verification of intensity modulated radiation therapy plan.
RESUMO
Objective:To evaluate the volumetric modulated arc therapy (VMAT) dose verification of cervical cancer based on γ rule and dose volume histogram (DVH) and to perform correlation analysis between the evaluation results and the dose differences.Methods:Twenty cervical cancer VMAT plans were selected and performed on TrueBeam Linac. The delivered point and surface dose was measured by FC-65 G and ArcCheck and the results were compared to those calculated by Eclipse. The dose of patients was reconstructed by 3DVH. Then, differences between the reconstructed and plan value of D mean, D 95%, D 98% and D 2% of PTV, V 20Gy of left and right femoral head, V 40Gy of rectum, D 1cm 3 of cord, D 98%, D 2% and D 50% of the 50% prescription iso-dose volume (IDV), were evaluated and 3-dimensional (3D) γ was assessed for each organ. Lastly, Pearson’s correlation coefficient was used to analyze the relationship between point dose difference, 2D γ pass-rate (γ%), γ mean and 3D γ% of each organ and the dose difference. Results:Small differences were found between the point dose measured, reconstructed and the plan value. Differences between D mean of PTV, all dose parameters of IDV and plan values were all within 3% and V 40Gy of rectum showed the largest difference. As for the 3D γ%, the maximum pass rate was found for the left and right femoral head and the maximum variance for cord D 1cm 3. There was a moderate correlation between measured and reconstructed point dose deviation and dose difference of each organ, while no significant correlation was found for 2D γ%. Strong correlation was found between 3D γ% of target and D 50% of PTV/IDV and no correlation was found for other organs. Conclusion:The performance of both γ-and DVH-based evaluation can reveal dose error for dose verification, but both of them have some limitations and should be combined in clinical practice.
RESUMO
Objective:To study the influence of environmental radiation of radiotherapy workplace on the stereotactic radiation therapy(SRT) plan absolute dose verification with plastic scintillator detector Exradin W1.Methods:The computed tomography (CT) image of the stereotactic dose verification phantom (SDVP) was scanned and imported into the treatment planning system. Three schemes, including 3 cm × 3 cm to 20 cm × 20 cm square gradient field irradiation, virtual planning target volume(PTV) non-coplanar arcs irradiation and 10 cases of volumetric modulated arc radiotherapy SRT (VMAT SRT) clinical plan verification, were measured with or without a home-made shield over the photodiode. Measurements were recorded to analyze the impact of environmental radiation on dose measurement under different conditions.Results:The noise effect of the photodiode increased with the the lager open field size, and decreased with the reduced distance between the photodiode and isocenter. The contribution of photodiode noise effect increase with the lager non-coplanar arc field size, with the largest up to 4.16%. As for the clinical SRT plan verification measurement, the relative difference between the SRT plan measurements and treatment planning system(TPS) before and after shielding were (1.39±1.05)% and (0.59±1.03)%, respectively ( t=-5.343, P < 0.05). and for W1 vs. A16 microchamber was (1.22±1.56)% and (0.42±1.42)%, respectively ( t=-5.414, P < 0.05). Conclusions:The measurements of Exradin W1 are in good agreement with the TPS result and the ionization chamber measurements, but its accuracy is easily affected by the environmental radiation of radiotherapy workplace. To measure non-coplanar radiation, the photodiode should be placed as far away as possible from the isocenter and be properly shielded, which can effectively improve the accuracy and stability of the measurement and provide a strong guarantee for clinical precision radiotherapy.
RESUMO
Objective:To preliminarily explore the effects of tumor treating fields (TTF) arrays on the dose distribution in the treatment of Glioblastoma (GBM) using combined radiotherapy and concurrent TTF.Methods:EDR2 and MatriXX plate ionization chamber were employed to measure the absorbed doses of tissues at different depths (< 1 mm, 3 mm, 5 mm, 1 cm, 1.5 cm, 3 cm, 5 cm, 10 cm, and 15 cm) in the case that TTF arrays and latex-free foam were attached and not attached on the surface. Then the absorbed doses were calculated, compared, and analyzed. For the volumetric arc therapy (VMAT) of 10 GBM patients, deep dose verification was performed using the Sun Nuclear ArcCheck 3D dose verification system and the D99%, Dmean, and D1% of tumors and OARs were assessed. Results:The surface dose increased by 173% in the case that TTF arrays and latex-free foam were attached to the surface compared with the case of the surface with nothing attached. The surface dose increased by 61.7% due to the attachment of low-density latex-free foam. The dose deviation gradually decreased with an increase in the depth and stabilized (about 4%) at a depth of greater than 1.5 cm. As indicated by the VMAT verification result, the D99%, Dmean, and D1% of PTV and CTV decreased by 1.1%-1.2% and the Dmean and D1% of OARs (i.e., brainstem, pituitary gland, optic chiasma, optic nerve, eyeball, and eye crystal) decreased by 0.7%-1.5% in the case that TTF array and latex-free foam were attached on the surface compared with the case the surface with nothing attached. Conclusions:The combined radiotherapy and concurrent TTF in the GBM treatment will lead to a slight reduction of the absorbed doses of targets and OARs but a significant increase in the absorbed doses of the scalp. Therefore, it is recommended that the scalp doses should be reduced as far as possible in the design of the radiation treatment plan to reduce the adverse reactions on the scalp of GBM patients.
RESUMO
Objective:Based on the AAPM-TG218 report, the dose verification of intensity-modulated radiotherapy (IMRT) plans were classified to understand the current status, establish the process and determine the limits of dose verification in our hospital.Methods:Different combinations of tumor locations, accelerators, treatment planning systems and verification devices in our hospital were verified and compared to determine the tolerance limits and action limits of each combination. The measurement requirement was adopted according to the AAPM-TG218 report, and 80 cases were selected for each measurement. The measurement procedures were implemented based upon the AAPM-TG218 report and clinical experience of our hospital.Results:The clinical action limits of IMRT plans in our hospital could meet the recommended range of the AAPM-TG218 report, and the tolerance limits were slightly lower than the AAPM-TG218 report′s recommendation (93.94% for 3%/2 mm). The measurement of verification devices was related to the sensitivity. The tolerance limits measured by EPID were higher than ArcCHECK, especially when the dose/distance requirements were more stringent (94.12% and 92.03% for 3%/2 mm, P=0.074; 86.82% and 74.61% for 2%/2 mm, P=0.017). Conclusion:Through the AAPM-TG218 report, the work flow of IMRT dose verification and the limit range are established in our hospital, providing guidance for subsequent clinical dosimetric measurement.
RESUMO
Objective:To validate the accuracy of physical model of in-vivo 3D dose verification based on electronic portal imaging device (EPID) using the phantom and preliminarily analyze the clinical application.Methods:Two phantoms (uniform and non-uniform phantoms) were involved in this study. The system of in-vivo 3D dose verification based on EPID was employed to acquire the images of square fields (SF) and combined fields of intensity-modulated radiotherapy (CFIMRT). The physical model of different media was constructed using the system. The factor of γ passing rate under different dose/distance criteria was statistically compared. For clinical cases, the dose-volume histograms were adopted to analyze the dose distribution of target volume and organs at risk (OARs).Results:For the SF in the uniform phantom, the average γ passing rate (3%/3 mm) was (97.49±1.11)%, and (94.06±5.11)% for the SF in the non-uniform phantom ( P>0.05). No statistical significance was noted in IMRT using different delivery methods (all P>0.05). For clinical cases, the average γ passing rate (3%/2 mm) was (97.96±1.84)% in the pre-treatment dose verification, and (90.51±6.96)%(3%/3 mm) for the in-vivo 3D dose verification. For clinical cases, significant dose deviation was observed in OARs with small size and large volume changes. Conclusion:The in-vivo 3D dose verification model based on EPID can be effectively applied in inter-fraction dose verification, providing technical support for adaptive radiotherapy in clinical practice.
RESUMO
Objective:To develop a verification platform based on Monte Carlo (MC) for independent dose verification of volumetric modulated arc therapy (VMAT) plans.Methods:The head model including collimator of Varian TrueBeam linear accelerator was constructed by using EGSnrc/BEAMnrc, and the independent dose verification platform for the patients’ VMAT plans was built based on the head model and an in-house code. The percent depth dose (PDD) curves and off-axis ratios for different field sizes, the dose distribution of two irregular fields and three VMAT plans of the head and neck, chest, and pelvis were simulated using the platform. The simulated results of the PDD curves and the off-axis ratios of different field sizes were compared with the blue water measurement results. The difference between the irregular fields and the actual ArcCHECK measurements was also investigated. Besides, the differences among the MC simulated dose, TPS calculated dose and the ArcCHECK measured dose were analyzed by several methods, such as γ analysis and dose-volume histogram to verify whether the platform could be independently employed for dose verification.Results:The MC simulated results of PDD curves and off-axis ratios from 4 cm×4 cm to 40 cm×40 cm were in good agreement with the measured results. And the γ passing rates between the MC simulation and the ArcCHECK measurement for the irregular fields were above 98.1% and 99.1% for 3%/2 mm and 3%/3 mm, respectively. For VMAT plans of three patients, the γ results between the MC simulated dose and ArcCHECK measured dose were better than 93.8% and 95.9% under the criteria of 3%/2 mm and 3%/3 mm respectively. At the same time, the γ passing rates of nasopharyngeal, lung, and rectal cancers were 95.2%, 98.6% and 98.9% based on 3D γ analysis using TPS calculated dose and MC simulated dose under the criteria of 3%/3 mm; the passing rates of these three were 90.3%, 95.1% and 96.7% for 3%/2 mm, respectively.Conclusions:The simulation results of the MC-based verification platform developed in this study show a good agreement with the actual measurement results, and the simulation results are closer to the real dose distribution using the patients’ data. The preliminary results demonstrate that the platform can be used for accurate independent dose verification of VMAT plans.
RESUMO
Objective To investigate the dose calculation accuracy of two algorithms in Monaco TPS for self-made phantoms with different cavity thickness, and analyze the influence of phantoms with different cavity thickness on dose verification of upper esophageal cancer. Methods The phantoms with different cavity thickness were placed on the simulated CT positioning machine to scan and acquire images. In Monaco TPS, the irradiation fields with energy of 6 MV, 100 MU and different square field sizes were added to the acquired images. The dose of the cavity of the ionization chamber was calculated by two algorithms, and measured on the accelerator by dosimeter under the same conditions. At the same time, 20 patients with upper esophageal cancer who received dynamic intensity modulation in fixed field were randomly selected and included in the study, and two algorithms were used for dose verification on phantoms with different cavity thickness. The results were statistically analyzed by SPSS 22.0 software. Results The maximum deviations between the calculated values and the measured values were 0.66% and −1.8%, in the calculation of phantoms with different cavity thickness by algorithms of Monte Carlo and Pencil Beam. In Monte Carlo algorithm, the result of RD pair t test is P > 0.05. Paired t test of AD (0 mm, 10 mm), (5 mm, 10 mm) and (10 mm, 20 mm) groups showed no significant difference (P < 0.05). The maximum deviation was 1.1%, and the rest groups were not statisticely significant (P > 0.05); In Pencil Beam algorithm the t test results of RD (0 mm, 20 mm) and (5 mm, 20 mm) pairs were (P < 0.05), the maximum deviation was 0.58%, and the rest groups were (P > 0.05). In AD group, (P < 0.05), the maximum deviation was 2.78%; The paired t test between the two algorithms was (P < 0.05), and the maximum deviations in RD and AD groups were 2.49% and 4.14%, respectively. Conclusion Monte Carlo algorithm has accurate calculation and high gamma pass rate of dose verification, and there is no clinical difference in gamma pass rate of dose verification among phantoms with different cavity thickness, pencil Beam algorithm is not recommended in cavity phantom calculation.
RESUMO
OBJECTIVES@#To study the feasibility of ArcCHECK-3DVH system in dosimetric verification for stereotactic body radiaotherapy (SBRT) with flattening filter free (FFF) model.@*METHODS@#SBRT treatment plans for 57 patients were introduced into ArcCHECK phantom and recalculated. The calculated dose distribution of treatment planning system and the measured dose distribution of ArcCHECK phantom were compared by γ analysis. Then the 3 dimensional dose distribution of target and organs at risk was reconstructed by 3DVH software. The reconstructed dose and calculated dose with treatment planning system (TPS) were compared, and the dose volume γ pass rate and deviation of dose volume parameters to the target and organs at risk were quantitatively valuated.@*RESULTS@#Based on the threshold criteria (3%, 3 mm, 10%), namely the deviation of measuring points between the planned value and the measured value was less than 3%, and the proportion of points with similar values in the plane or sphere with the center of the point and the radius of 3 mm was 10%, the relative and absolute dose pass rates of SBRT treatment plans in ArcCHECK system via γ analysis were greater than 95%. Based on the stricter threshold criteria (2%, 2 mm, 10%), the relative and absolute dose pass rates of SBRT treatment plan in ArcCHECK system via γ analysis were about 93%. In 3DVH dose verification, the γ pass rate of target and organs at risk was exceed 97%, and the deviations in 3DVH of the target and organs at risk were less than ±5%.@*CONCLUSIONS@#The ArcCHECK-3DVH system in dose verification can provide more comprehensive dose distribution information to reasonably evaluate the SBRT plan, with more significance for guiding clinical treatment.