Fabrication of rough surface on titanium using electrochemical treatment in NaCl electrolyte / 대한치과재료학회지

It is difficult to get sufficient roughness on titanium implant surface using traditional electrochemical treatments. In this study, we have developed a new method which provides a hybrid structured titanium surface having micro/nano roughness using electrochemical treatment in NaCl electrolyte and hydrothermal treatment. Titanium disks were anodically oxidized (ANO) in 0.15M NaCl electrolyte by applying positive electric pulses. The oxide compounds loosely attached to the surface were removed by ultrasonic cleaning (ANO group). These specimens were hydrothermally (HT) treated in an alkaline solution (ANO-HT group). ANO group showed the dimpled grain surfaces with a diameter of approximately 30 µm, and its roughness (Ra) was about 2.4 µm. The nano-sized crystallites which had an anatase TiO₂ crystalline structure were uniformly distributed on the surface of ANO-HT group. This group still retained high roughness (~2.7 µm) similar to ANO group and showed high hydrophilicity. Titanium surface with high roughness and hydrophilicity was fabricated using new electrochemical treating method and hydrothermal treatment. This surface modification method could be used for enhancing the osteoconductivity of the titanium implants.

Studies on the electrochemical disinfection of water containing Escherichia coli using a Dimensionally Stable Anode

The aim of this work was to investigate the disinfectant effect of electrolysis on chlorine-free water, artificially contaminated with Escherichia coli (CCT-1457) and to evaluate the bactericidal activity of electrolysis and kinetic behavior of a single-cell reactor, with a DSA (Dimensionally Stable Anode) electrode to develop a scaled-up system. A high-density E. coli suspension (10(6) CFU mL-1) was electrolyzed in this reactor at 25, 50 and 75 mA cm-2 for up to 60 min, at flow rates of 200 and 500 L h-1. Bacterial survival fell by 98.9 percent without addition of chlorinated compounds and a power consumption rate not more than 5.60 kWh m-3 at flow rate of 200 L h-1 and 75 mA cm-2. The process produced a germicidal effect that reached this inactivation rate within a relatively short contact time. Also, a solution of electrolyzed 0.08 M Na2SO4 added to the inoculum showed residual bactericidal effect. The efficiency of disinfection was regulated by both the contact time and current density applied, and a kinetic function for the survival rate was developed for the purpose of scaling up.

Água contaminada é uma das maiores origens de doenças em seres humanos. Em todo o mundo, a cloração é o método mais utilizado para promover desinfecção em águas de abastecimento devido ao seu efeito residual, quando adequadamente calculado. Contudo, se a água apresentar matéria orgânica, pode haver a geração de organoclorados, os quais são genotóxicos e carcinogênicos. Sob esta óptica, investigamos o efeito bactericida da aplicação da eletrólise em água sem cloro contaminada com Escherichia coli (CCT-1457). O objetivo deste estudo foi avaliar o poder de desinfecção e o comportamento cinético da eletrólise realizada em reator de compartimento único e usando eletrodos ADE (Anodo Dimensionalmente Estável), visando ampliação de escala. Uma suspensão contendo elevada concentração de E. coli (10(6) UFC mL-1) foi submetida ao tratamento no reator em 25, 50 e 75 mA cm-2 durante 60 min, em vazões de 200 e 50 Lh-1. A taxa de inativação foi aproximadamente 99 por cento para a solução isenta de compostos clorados, com consumo de energia elétrica menor que 5,60 kWh m-3 em 200 L h-1 e 75 mA cm-2. Uma solução de Na2SO4 0,08M eletrolisada e adicionada posteriormente ao inoculo apresentou efeito residual bactericida. A eficiência da desinfecção foi regida pelo tempo de contato e pela densidade de corrente aplicada, e foi realizado um estudo cinético que permite a ampliação de escala.