Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
1.
Artigo em Inglês | IMSEAR | ID: sea-180454

RESUMO

The purpose of investigation is to find out the potential of Medium Molecular Weight Chitosan (MMWCH) loaded with Lincomycin Hydrochloride (LNC) having pKa 7.6 and log p value 0.20 for treatment of periodontitis and gingivitis, prepared by using solvent casting technology in form of intra pocket dental film. Four sets of formulation were prepared and each set comprises of four formulations each. The formulations were evaluated for drug content uniformity, weight uniformity, thickness of patch, surface pH, moisture loss, swelling index, water vapor transmission rate, static in vitro release studies using diffusion cell, ex vivo flux study using diffusion cell by help of excised gum lining of goat, release kinetics and Akaike Information Criteria; goodness of fit (AIC) value determination. Excipient drug interaction was carried out by using Fourier Transform Infrared spectroscopy (FTIR), and by Thermo gravimetric Analysis (TGA)/Differential thermal analysis (DTA)/Derivative thermo gravimetric analysis (DTG) and this suggests that there is no drug excipient interaction occurs. The drug release studies show the sustained release without any burst effect for consecutive 5 days. Formulation R1, R2, R7, R8, R9, R10, R13 and R14 and follows the zero order release pattern and formulation R3, R4, R5, R6, R11, R12, R15 and R16 follows the Higuchi model because they have lower AIC value and higher r2 value. Formulation ER17, ER18, ER19 and ER20 is having the average flux of 1.0, 1.48, 1.35 and 1.45 mg/cm2 hr-1 respectively, and when compared statistically student’s paired t-test these all formulations are significantly different from each other.

2.
Journal of Medical Informatics ; (12): 26-31, 2016.
Artigo em Chinês | WPRIM | ID: wpr-514067

RESUMO

The paper introduces the current situation of hospital operation index statistics,explores the design of hospital operation index set based on the standards,an index system with 3-layer architecture based on the data platform and the application modules of the index set.The development and application of this system ensures the consistent calculation,highly efficient utilization and shared reuse of statistical indexes and makes the hospital data services more orderly,efficient and accurate.

3.
Biosci. j. (Online) ; 31(3): 791-800, may./jun. 2015.
Artigo em Inglês | LILACS | ID: biblio-963885

RESUMO

The objective of this work was to evaluate the distribution of biomass in compartments, as well as to test and select methods to estimate total biomass for species of Bambusa. For the test of the methods were evaluated: method of estimation from allometric models (total and by compartments), application of allometric equation from literature and method that uses the volume, the density and biomass expansion factor (BEF). Were evaluated using the destructive method, 24 bamboos of the species Bambusa oldhamii Munro and Bambusa vulgaris Schrad. ex J. C. Wendl. For the estimation of biomass, were adjusted 5 models for the selection of the best one and the BEF calculated through the values of volume and density. These methodologies were compared among themselves and with the real biomass. The relationship of increased strength of independent variables with dried biomass measured was with dbh. In the adjustment of mathematical models, the best model was the 5 for the total biomass, model 1 for leaf and culm, and the model 3 for the limb. Of the three methodologies for estimating total biomass, the method of Biomass Expansion Factor demonstrated greater accuracy in estimates, being indicated, therefore, the potential use of this methodology.


Esse trabalho tem como objetivo avaliar a distribuição da biomassa nos compartimentos, bem como, testar e selecionar métodos para estimativa de biomassa total para o gênero Bambusa. Para o teste dos métodos foram avaliados: método da estimativa a partir de modelos alométricos, aplicação de equação alométrica obtida por literatura e método que utiliza o volume, a densidade e o fator de expansão da biomassa (FEB). Foram avaliados, utilizando o método destrutivo, 24 bambus das espécies Bambusa oldhamii Munro e Bambusa vulgaris Schrad. ex J. C. Wendl. Para a estimativa de biomassa, foram ajustados 5 modelos para a seleção do melhor e calculado o FEB através dos valores de volume e densidade, metodologias estas comparadas entre si e com a biomassa real. A relação de maior força das variáveis independentes com as biomassas secas mensuradas se deu com o dap. No ajuste dos modelos matemáticos, o melhor modelo foi o 5 para o compartimento total, modelo 1 para folhagem e colmo, e o modelo 3 para os galhos. Das três metodologias de estimativa da biomassa total, o método do Fator de Expansão da Biomassa demonstrou maior acurácia nas estimativas, sendo indicada, portanto, a potencial utilização dessa metodologia.


Assuntos
Bioestatística , Biomassa , Bambusa
4.
Rev. biol. trop ; 61(3): 1167-1174, sep. 2013. graf, tab
Artigo em Espanhol | LILACS | ID: lil-688467

RESUMO

Growth models of marine animals, for fisheries and/or aquaculture purposes, are based on the popular von Bertalanffy model. This tool is mostly used because its parameters are used to evaluate other fisheries models, such as yield per recruit; nevertheless, there are other alternatives (such as Gompertz, Logistic, Schnute) not yet used by fishery scientists, that may result useful depending on the studied species. The penshell Atrina maura, has been studied for fisheries or aquaculture supplies, but its individual growth has not yet been studied before. The aim of this study was to model the absolute growth of the penshell A. maura using length-age data. For this, five models were assessed to obtain growth parameters: von Bertalanffy, Gompertz, Logistic, Schnute case 1 and Schnute and Richards. The criterion used to select the best models was the Akaike information criterion, as well as the residual squared sum and R² adjusted. To get the average asymptotic length, the multi model inference approach was used. According to Akaike information criteria, the Gompertz model better described the absolute growth of A. maura. Following the multi model inference approach the average asymptotic shell length was 218.9mm (IC 212.3-225.5) of shell length. I concluded that the use of the multi model approach and the Akaike information criteria represented the most robust method for growth parameter estimation of A. maura and the von Bertalanffy growth model should not be selected a priori as the true model to obtain the absolute growth in bivalve mollusks like in the studied species in this paper.


El molusco bivalvo Atrina maura (Sowervy 1835) habita aguas marinas someras y estuarios en la costa del Pacífico desde Baja California, México hasta Perú. Es un organismo cuyo crecimiento individual ha sido insuficientemente modelado. El objetivo del estudio fue modelar su crecimiento individual absoluto mediante el uso de datos de longitud a la edad obtenidos de una región del Golfo de California. Los parámetros fueron obtenidos con el uso de cinco modelos de crecimiento; von Bertalanffy, Gompertz, Logístico, Caso 1 de Schnute y Schnute & Richards. Se seleccionó el mejor modelo usando el criterio de información de Akaike, AIC, pero se calcularon también la suma de residuos al cuadrado y la R² ajustada. Para obtener la longitud asintótica se siguió el enfoque de inferencia multi modelo IMM. Según el AIC el modelo que mejor describe el crecimiento absoluto de A. maura es el de Gompertz y colocó en cuarto lugar jerárquico el de von Bertalanffy. La longitud asintótica promedio encontrada, siguiendo la IMM, fue de 218.9mm (IC 212.3-225.5) de longitud de concha. Se concluye que tanto la IMM como el AIC representan las herramientas más sólidas para evaluar parámetros de crecimiento individual de A. maura y que el modelo de crecimiento de von Bertalanffy no debe ser seleccionado a priori como la opción para describir el crecimiento individual en moluscos bivalvos como la especie estudiada.


Assuntos
Animais , Bivalves/crescimento & desenvolvimento , Modelos Biológicos , Bivalves/classificação
5.
Bol. malariol. salud ambient ; 50(2): 219-232, dic. 2010. ilus, tab
Artigo em Espanhol | LILACS | ID: lil-630439

RESUMO

El dengue es uno de los mayores problemas de salud pública en el estado Aragua. La situación se ha deteriorado en los últimos años, reportándose la mayor epidemia durante el año 2001. En los años 2002 y 2003 las tasas de exposición y riesgos relativos en municipios que conforman al estado Aragua, muestran que el área metropolitana de Maracay concentra riesgos importantes. Los municipios Girardot (capital), Francisco Linares Alcántara y Santiago Mariño, son los que concentraron los mayores riesgos. Durante ese período el número de nuevos casos de dengue aumentó especialmente durante la época de lluvias, evidenciándose la existencia de un patrón estacional. Este trabajo propone Modelos Bayesianos Jerárquicos con estructura espacio temporal que incluye variables climáticas y socio-demográficas con las cuales se identificaron factores de mayor influencia en la incidencia del dengue y se determinaron las parroquias con mayores riesgos.Los ajustes de los modelos resultantes se obtuvieron mediante técnicas con cadenas Markov Monte Carlo (MCMC) y se compararon con el criterio de información de deviancia (DIC). Estos modelos constituyen una herramienta importante que expertos en epidemiología y miembros del sector de salud pública deben considerar para el control del vector Aedes aegypti Linnaeus en el estado Aragua.


Dengue fever is a major public health problem in Aragua State, Venezuela. The situation has worsened in recent years, with a major epidemic during 2001. During 2002 and 2003 the exposition rates and relative risks of the municipalities that encompass Aragua State showed the highest relative risk of infection in the metropolitan area of Maracay. The municipalities of Girardot (capital), Francisco Linares Alcántara and Santiago Mariño concentrated the highest risk. During 2002 and 2003 the number of new dengue cases increased especially during the rainy season, showing the existence of a seasonal pattern. The present work presents Bayesian Hierarchical Models with spatio-temporal structure that included climatic and socioeconomic explanatory variables used to identify factors of major influence on dengue incidence and determined the municipalities with higher risks. Models were fitted using Markov Chain Monte Carlo (MCMC) methods and selected using the deviance information criteria (DIC), respectively. These models constitute an important tool that epidemiologists and public health officers in Aragua State have to consider for the control of the vector Aedes aegypti Linnaeus.


Assuntos
Humanos , Animais , Aedes , Dengue , Cadeias de Markov , Saúde Pública , Densovirinae , Controle de Mosquitos , Controle de Vetores de Doenças
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA