Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Adicionar filtros








Intervalo de ano
1.
Braz. j. biol ; 82: 1-10, 2022. ilus, tab, graf
Artigo em Inglês | LILACS, VETINDEX | ID: biblio-1468490

RESUMO

Artemisia absinthium L. is an important herb that is widely cultivated in different parts of the world for its medicinal properties. The present study evaluated the effects of four concentrations of nanoparticles treatment (0, 10, 20 and 30 mg L-¹) and NaCl salinity stress (0, 50, 100 and 150 mM NaCl) and their interactions with respect to the expression of two key genes, i.e. DBR2 and ADS, in the biosynthesis pathway of artemisinin in A. absinthium. Total RNA was extracted and a relative gene expression analysis was carried out using Real-Time PCR. The amount of artemisinin was also determined by HPLC. All the experiments were performed as factorial in a completely randomized design in three replications. The results revealed that salinity stress and nanoparticles treatment and their interaction affected the expressions of these genes significantly. The highest levels of ADS gene expression were observed in the 30 mg L-¹ nanoparticles–treated plants in the presence of 150 mM salinity stress and the lowest levels in the 10 mg L-¹ nanoparticles–treated plants under 50 mM salinity stress. The maximum DBR2 gene expression was recorded in the 10 mg L-¹ nanoparticles–treated plants in the absence of salinity stress and the minimum expression in the 100 mM salinity-stressed plants in the absence of nanoparticles treatment. Moreover, the smallest amounts of artemisinin were observed in the 150 mM salinity-stressed plants in the absence of nanoparticles and the highest amounts in the 30 mg L-¹ nanoparticles–treated plants. The maximum amounts of artemisinin and ADS gene expression were reported from the plants in the same nanoparticles treatment and salinity stress [...].


Artemisia absinthium L. é uma erva importante que é amplamente cultivada em diferentes partes do mundo por suas propriedades medicinais. O presente estudo avaliou os efeitos de quatro concentrações de tratamento com nanopartículas (0, 10, 20 e 30 mg L-¹) e estresse de salinidade com NaCl (0, 50, 100 e 150 mM NaCl) e suas interações com relação à expressão de dois genes-chave, isto é, DBR2 e ADS, na via de biossíntese da artemisinina em A. absinthium. O RNA total foi extraído, e uma análise de expressão gênica relativa foi realizada usando PCR em tempo real. A quantidade de artemisinina também foi determinada por HPLC. Todos os experimentos foram realizados como fatorial, em delineamento inteiramente casualizado, em três repetições. Os resultados revelaram que o estresse por salinidade e o tratamento com nanopartículas e sua interação afetaram significativamente as expressões desses genes. Os níveis mais altos de expressão do gene ADS foram observados nas plantas tratadas com nanopartículas de 30 mg L-¹ na presença de estresse de salinidade de 150 mM, e os níveis mais baixos, nas plantas tratadas com nanopartículas de 10 mg L-¹ com estresse de salinidade de 50 mM. A expressão máxima do gene DBR2 foi registrada nas plantas tratadas com nanopartículas de 10 mg L-¹ na ausência de estresse de salinidade, e a expressão mínima, nas plantas estressadas com salinidade de 100 mM na ausência de tratamento com nanopartículas. Além disso, as menores quantidades de artemisinina foram observadas nas plantas com estresse de salinidade de 150 mM na ausência de nanopartículas, e as maiores quantidades, nas plantas tratadas com nanopartículas de 30 mg L-¹. As quantidades máximas de expressão de genes de artemisinina e ADS foram relatadas a partir das plantas no mesmo tratamento com nanopartículas e condições de estresse de salinidade. A esse respeito, a quantidade de artemisinina diminuiu pela metade nas [...],


Assuntos
Artemisia/enzimologia , Artemisia/genética , Artemisininas , Estresse Salino , Nanopartículas/análise
2.
Braz. j. biol ; 822022.
Artigo em Inglês | LILACS-Express | LILACS, VETINDEX | ID: biblio-1468677

RESUMO

Abstract Artemisia absinthium L. is an important herb that is widely cultivated in different parts of the world for its medicinal properties. The present study evaluated the effects of four concentrations of nanoparticles treatment (0, 10, 20 and 30 mg L-1) and NaCl salinity stress (0, 50, 100 and 150 mM NaCl) and their interactions with respect to the expression of two key genes, i.e. DBR2 and ADS, in the biosynthesis pathway of artemisinin in A. absinthium. Total RNA was extracted and a relative gene expression analysis was carried out using Real-Time PCR. The amount of artemisinin was also determined by HPLC. All the experiments were performed as factorial in a completely randomized design in three replications. The results revealed that salinity stress and nanoparticles treatment and their interaction affected the expressions of these genes significantly. The highest levels of ADS gene expression were observed in the 30 mg L-1 nanoparticlestreated plants in the presence of 150 mM salinity stress and the lowest levels in the 10 mg L-1 nanoparticlestreated plants under 50 mM salinity stress. The maximum DBR2 gene expression was recorded in the 10 mg L-1 nanoparticlestreated plants in the absence of salinity stress and the minimum expression in the 100 mM salinity-stressed plants in the absence of nanoparticles treatment. Moreover, the smallest amounts of artemisinin were observed in the 150 mM salinity-stressed plants in the absence of nanoparticles and the highest amounts in the 30 mg L-1 nanoparticlestreated plants. The maximum amounts of artemisinin and ADS gene expression were reported from the plants in the same nanoparticles treatment and salinity stress conditions. In this regard, the amount of artemisinin was decreased by half in the plants containing the highest DBR2 gene expression. Meanwhile, no significant correlation was observed between these gene expressions and the artemisinin amount in the other nanoparticlestreated plants under different levels of salinity stress. The biosynthetic pathway of secondary metabolites appears to be very complex and dose not directly dependent on these gene expressions.


Resumo Artemisia absinthium L. é uma erva importante que é amplamente cultivada em diferentes partes do mundo por suas propriedades medicinais. O presente estudo avaliou os efeitos de quatro concentrações de tratamento com nanopartículas (0, 10, 20 e 30 mg L-1) e estresse de salinidade com NaCl (0, 50, 100 e 150 mM NaCl) e suas interações com relação à expressão de dois genes-chave, isto é, DBR2 e ADS, na via de biossíntese da artemisinina em A. absinthium. O RNA total foi extraído, e uma análise de expressão gênica relativa foi realizada usando PCR em tempo real. A quantidade de artemisinina também foi determinada por HPLC. Todos os experimentos foram realizados como fatorial, em delineamento inteiramente casualizado, em três repetições. Os resultados revelaram que o estresse por salinidade e o tratamento com nanopartículas e sua interação afetaram significativamente as expressões desses genes. Os níveis mais altos de expressão do gene ADS foram observados nas plantas tratadas com nanopartículas de 30 mg L-1 na presença de estresse de salinidade de 150 mM, e os níveis mais baixos, nas plantas tratadas com nanopartículas de 10 mg L-1 com estresse de salinidade de 50 mM. A expressão máxima do gene DBR2 foi registrada nas plantas tratadas com nanopartículas de 10 mg L-1 na ausência de estresse de salinidade, e a expressão mínima, nas plantas estressadas com salinidade de 100 mM na ausência de tratamento com nanopartículas. Além disso, as menores quantidades de artemisinina foram observadas nas plantas com estresse de salinidade de 150 mM na ausência de nanopartículas, e as maiores quantidades, nas plantas tratadas com nanopartículas de 30 mg L-1. As quantidades máximas de expressão de genes de artemisinina e ADS foram relatadas a partir das plantas no mesmo tratamento com nanopartículas e condições de estresse de salinidade. A esse respeito, a quantidade de artemisinina diminuiu pela metade nas plantas que contêm a expressão gênica DBR2 mais alta. Enquanto isso, nenhuma correlação significativa foi observada entre essas expressões gênicas e a quantidade de artemisinina nas outras plantas tratadas com nanopartículas sob diferentes níveis de estresse de salinidade. A via biossintética dos metabólitos secundários parece ser muito complexa e não depende diretamente dessas expressões gênicas.

3.
Braz. j. biol ; 82: e237214, 2022. tab, graf
Artigo em Inglês | LILACS, VETINDEX | ID: biblio-1249258

RESUMO

Artemisia absinthium L. is an important herb that is widely cultivated in different parts of the world for its medicinal properties. The present study evaluated the effects of four concentrations of nanoparticles treatment (0, 10, 20 and 30 mg L-1) and NaCl salinity stress (0, 50, 100 and 150 mM NaCl) and their interactions with respect to the expression of two key genes, i.e. DBR2 and ADS, in the biosynthesis pathway of artemisinin in A. absinthium. Total RNA was extracted and a relative gene expression analysis was carried out using Real-Time PCR. The amount of artemisinin was also determined by HPLC. All the experiments were performed as factorial in a completely randomized design in three replications. The results revealed that salinity stress and nanoparticles treatment and their interaction affected the expressions of these genes significantly. The highest levels of ADS gene expression were observed in the 30 mg L-1 nanoparticles­treated plants in the presence of 150 mM salinity stress and the lowest levels in the 10 mg L-1 nanoparticles­treated plants under 50 mM salinity stress. The maximum DBR2 gene expression was recorded in the 10 mg L-1 nanoparticles­treated plants in the absence of salinity stress and the minimum expression in the 100 mM salinity-stressed plants in the absence of nanoparticles treatment. Moreover, the smallest amounts of artemisinin were observed in the 150 mM salinity-stressed plants in the absence of nanoparticles and the highest amounts in the 30 mg L-1 nanoparticles­treated plants. The maximum amounts of artemisinin and ADS gene expression were reported from the plants in the same nanoparticles treatment and salinity stress conditions. In this regard, the amount of artemisinin was decreased by half in the plants containing the highest DBR2 gene expression. Meanwhile, no significant correlation was observed between these gene expressions and the artemisinin amount in the other nanoparticles­treated plants under different levels of salinity stress. The biosynthetic pathway of secondary metabolites appears to be very complex and dose not directly dependent on these gene expressions.


Artemisia absinthium L. é uma erva importante que é amplamente cultivada em diferentes partes do mundo por suas propriedades medicinais. O presente estudo avaliou os efeitos de quatro concentrações de tratamento com nanopartículas (0, 10, 20 e 30 mg L-1) e estresse de salinidade com NaCl (0, 50, 100 e 150 mM NaCl) e suas interações com relação à expressão de dois genes-chave, isto é, DBR2 e ADS, na via de biossíntese da artemisinina em A. absinthium. O RNA total foi extraído, e uma análise de expressão gênica relativa foi realizada usando PCR em tempo real. A quantidade de artemisinina também foi determinada por HPLC. Todos os experimentos foram realizados como fatorial, em delineamento inteiramente casualizado, em três repetições. Os resultados revelaram que o estresse por salinidade e o tratamento com nanopartículas e sua interação afetaram significativamente as expressões desses genes. Os níveis mais altos de expressão do gene ADS foram observados nas plantas tratadas com nanopartículas de 30 mg L-1 na presença de estresse de salinidade de 150 mM, e os níveis mais baixos, nas plantas tratadas com nanopartículas de 10 mg L-1 com estresse de salinidade de 50 mM. A expressão máxima do gene DBR2 foi registrada nas plantas tratadas com nanopartículas de 10 mg L-1 na ausência de estresse de salinidade, e a expressão mínima, nas plantas estressadas com salinidade de 100 mM na ausência de tratamento com nanopartículas. Além disso, as menores quantidades de artemisinina foram observadas nas plantas com estresse de salinidade de 150 mM na ausência de nanopartículas, e as maiores quantidades, nas plantas tratadas com nanopartículas de 30 mg L-1. As quantidades máximas de expressão de genes de artemisinina e ADS foram relatadas a partir das plantas no mesmo tratamento com nanopartículas e condições de estresse de salinidade. A esse respeito, a quantidade de artemisinina diminuiu pela metade nas plantas que contêm a expressão gênica DBR2 mais alta. Enquanto isso, nenhuma correlação significativa foi observada entre essas expressões gênicas e a quantidade de artemisinina nas outras plantas tratadas com nanopartículas sob diferentes níveis de estresse de salinidade. A via biossintética dos metabólitos secundários parece ser muito complexa e não depende diretamente dessas expressões gênicas.


Assuntos
Artemisia absinthium/genética , Artemisia annua , Artemisininas , Nanopartículas , Proteínas de Plantas , Titânio , Estresse Salino
4.
Dental press j. orthod. (Impr.) ; 22(5): 67-74, Sept.-Oct. 2017. tab, graf
Artigo em Inglês | LILACS | ID: biblio-891091

RESUMO

ABSTRACT Introduction: Plaque accumulation and bond failure are drawbacks of orthodontic treatment, which requires composite for bonding of brackets. As the antimicrobial properties of TiO2 nanoparticles (NPs) have been proven, the aim of this study was to evaluate the antimicrobial and mechanical properties of composite resins modified by the addition of TiO2 NPs. Methods: Orthodontics composite containing 0%, 1%, 5% and 10% NPs were prepared. 180 composite disks were prepared for elution test, disk agar diffusion test and biofilm inhibition test to collect the counts of microorganisms on three days, measure the inhibition diameter and quantify the viable counts of colonies consequently. For shear bond strength (SBS) test, 48 intact bovine incisors were divided into four groups. Composites containing 0%, 1%, 5% and 10% NPs were used for bonding of bracket. The bracket/tooth SBS was measured by using an universal testing machine. Results: All concentration of TiO2 NPs had a significant effect on creation and extension of inhibition zone. For S. mutans and S. sanguinis, all concentration of TiO2 NPs caused reduction of the colony counts. Composite containing 10% TiO2 NPs had significant effect on reduction of colony counts for S. mutans and S. sanguinis in all three days. The highest mean shear bond strength belonged to the control group, while the lowest value was seen in 10% NPs composite. Conclusions: Incorporating TiO2 nanoparticles into composite resins confer antibacterial properties to adhesives, while the mean shear bond of composite containing 1% and 5% NPs still in an acceptable range.


RESUMO Introdução: o acúmulo de placa e as descolagens de braquetes são algumas desvantagens presentes no tratamento ortodôntico, no qual se requer o uso de materiais compósitos para a colagem dos braquetes. Objetivo: tendo em vista que as propriedades antimicrobianas das nanopartículas (NPs) de TiO2 já foram confirmadas, o objetivo do presente estudo foi avaliar as propriedades antimicrobianas e mecânicas de resinas compostas modificadas pela adição de NPs de TiO2. Métodos: compósitos ortodônticos contendo 0%, 1%, 5% e 10% de NPs foram preparados. Cento e oitenta discos de compósito foram preparados para o teste de eluição, o ensaio de difusão em ágar por disco, e o ensaio de inibição da formação de biofilme, para se calcular as contagens de microrganismos ao longo de três dias, medir o diâmetro da inibição e, consequentemente, quantificar as contagens de colônias viáveis. Para o teste de resistência da colagem ao cisalhamento (SBS), 48 incisivos bovinos intactos foram divididos em quatro grupos, nos quais os compósitos contendo 0%, 1%, 5% e 10% de NPs foram utilizados para colagem dos braquetes. A SBS da interface braquete/dente foi medida em uma máquina universal de ensaios. Resultados: todas as concentrações de NPs de TiO2 apresentaram efeito significativo na formação e na extensão da zona de inibição. Para o S. mutans e o S. sanguinis, todas as concentrações de NPs de TiO2 causaram redução na contagem das colônias. O compósito contendo 10% de NPs de TiO2 apresentou uma diminuição significativa na contagem de colônias de S. mutans e S. sanguinis durante os três dias. A média mais alta da SBS foi observada no grupo controle, enquanto o valor mais baixo foi observado para o compósito com 10% de NPs. Conclusões: a incorporação de nanopartículas de TiO2 nas resinas compostas lhes conferiu propriedades antibacterianas, e o valor médio da SBS das resinas contendo 1% e 5% de NPs apresentou-se dentro de uma faixa aceitável.


Assuntos
Animais , Titânio/farmacologia , Colagem Dentária , Resinas Compostas/farmacologia , Nanopartículas , Antibacterianos/farmacologia , Streptococcus mutans/efeitos dos fármacos , Streptococcus sanguis/efeitos dos fármacos , Titânio/análise , Bovinos , Braquetes Ortodônticos , Resinas Compostas/química , Esmalte Dentário/microbiologia , Resistência ao Cisalhamento , Incisivo/microbiologia , Antibacterianos/análise
5.
Rev. odontol. UNESP (Online) ; 40(1): 1-5, jan.-fev. 2011. tab
Artigo em Português | LILACS, BBO | ID: biblio-874846

RESUMO

Nanotecnologia, ciência do minúsculo, gera produtos capazes de manipular átomos e moléculas com aplicação no processo de esterilização de instrumentais odontológicos. Objetivo: Avaliar a ação autolimpante e esterilizante do processo de fotocatálise heterogênea desencadeado pela ação da luz UV e branca sobre o recobrimento de instrumentos odontológicos com nanopartículas de TiO2 e Ag. Material e método: Foram realizados testes bacteriológicos em espátulas odontológicas revestidas com nanopartículas de TiO2 e Ag (uma ou três camadas) e contaminadas com 10 mcrl dos microrganismos Enterococcus faecalis e Pseudomonas aeruginosa. Após contaminação, as espátulasforam expostas à luz UV e branca por 120 minutos, transferidas para tubos contendo meio BHI e incubadas a 35-37 °C. Foram feitas leituras em intervalos de 24, 48, 72 e 96 horas para verificação do crescimento das bactérias e testes de controle e recuperação. Resultado: A Pseudomonas aeruginosa foi inativada após exposição de 120 minutos à luz UV, indicando a ocorrência do processo de fotocatálise heterogênea no recobrimento de nanopartículas de TiO2 e Ag das espátulas. A Pseudomonas aeruginosa não foi inativada pela exposição à luz branca e o Enterococcus faecalis não foi inativado pela exposição à luz UV e à branca nas espátulas de cimento odontológico recobertas com nanopartículas de TiO2 e Ag, nas leituras de até 96 horas, ocorrendo o crescimento bacteriano. Conclusão: Não houve influência do revestimento das espátulas com uma ou três camadas de nanopartículas de TiO2 e Agnos resultados. A fotocatálise heterogênea da Pseudomonas aeruginosa foi confirmada pela exposição à luz UV da espátula com revestimento de TiO2 e Ag, mas não pela luz branca. A fotocatálise heterogênea do Enterococcus fecalis não foi confirmada tanto pela exposição do TiO2 e Ag à luz UV como à branca.


Nanotechnology, the science of minuscule, has developed products which are able t o manipulate atoms and molecules that could be applied in the sterilization process of dental instruments. Objetives: The objective of the present study was to evaluate the self-cleaning action of TiO2 and Ag nanoparticles coating on dental instruments by the photocataliys process under UV and visible light irradiation. Material and method: Microbiologic tests were done using dental cement spatulas coated with TiO2 and Ag nanoparticles (one or three layers), and contaminated with 10 mcrl of Pseudomonas aeruginosa and Enterococcus faecalis, respectively. After contamination, they were exposed to ultraviolet light and visible light for 120 minutes. Next, they were transferred to and stored in test tubeswith BHI (Brain Heart Infusion) and incubated in 35 to 37 °C. Checking times for bacterial growth and for control and retrieval tests were done at: 24, 48, 72 and 96 hours. Result: The Pseudomonas aeruginosa was inactive after120 minutes of ultraviolet light irradiation, thus confirming the heterogeneous photocatalytic activity of TiO2 and Ag. The Pseudomonas aeruginosa was not inactivated under visible light irradiation and the Enterococcus faecalis was not inactivated under UV and visible light irradiation of the dental cement spatulas coated with TiO2 and Agnanoparticles in the readings to 96 hours, showing bacterial growth. Conclusion: There were no influence of one or three layers of TiO2 and Ag nanoparticles coating of the spatulas in the results. The heterogeneous photocatalysis activity of TiO2 and Ag under UV light irradiation was confirmed for Pseudomonas aeruginosa but not under visible light. Enterococcus faecalis did not confirmed the photocatalytics activity of TiO2 and Ag under UV light irradiation and visible lights irradiation.


Assuntos
Testes de Sensibilidade Microbiana , Enterococcus faecalis , Esterilização , Instrumentos Odontológicos , Nanopartículas , Nanotecnologia , Pseudomonas aeruginosa , Raios Ultravioleta
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA