Optimization of extraction technology of volatile oil from Blumea balsamifera and analysis on its compositions / 中国药房

OBJECTIVE To opti mize the supercritical CO 2 extraction technology of volatile oil from Blumea balsamifera ，and compare the components of the volatile oil from B. balsamifera obtained by supercritical CO 2 extraction and steam distillation. METHODS The volatile oil of B. balsamifera was extracted by supercritical CO 2 extraction. Using extraction rate of volatile oil as index，extraction temperature ，extraction pressure and extraction time as factors ，based on single-factor experiment ，orthogonal experiment was used to optimize the supercritical CO 2 extraction technology. Gas chromatography-mass spectrometry was used to identify the components of volatile oil from B. balsamifera . Peak area normalization was used to calculate the relative contents of each component. Taking the volatile oil obtained by steam distillation as a reference ，the extraction rates ，components and contents of volatile oil by the two methods were compared. RESULTS The optimal supercritical CO 2 extraction technology of volatile oil from B. balsamifera included extraction pressure of 30 MPa，extraction temperature of 50 ℃ and extracting for 50 min. After 3 times of validation tests ，average extraction rate of volatile oil was 4.64％（RSD＝0.54％，n＝3）. Thirty-nine components such as tritriacontane，stigmasterol，squalene were identified in the volatile oil of B. balsamifera obtained by supercritical CO 2 extraction； and 51 components such as triacontane ，ledol，humulene epoxide Ⅰ were identified by steam distillation. The extraction rate of volatile oil from B. balsamifera obtained by 2 methods were 4.64％ and 0.99％. A total of 26 common components were obtained ， such as xanthoxylin ，L-borneol，β-caryophyllene. Except for xanthoxyline （34.829％ by supercritical CO 2 extraction，30.676％ by steam distillation method ）and phytol （2.401％ by supercritical CO 2 extraction，1.273％ by steam distillation ），the relative contents of the components of volatile oil obtained by supercritical CO 2 extraction were lower than those of steam distillation. CONCLUSIONS The optimal supercritical CO 2 extraction technology is stable and feasible ；the components and contents of volatile oil obtained by two methods varies greatly ，and main compounds are aldehydes and ketones ，alkenes，alcohols and other components.

Determination of Total Nitrogen in Nidus Vespae by Salicylic Acid and Sodium Hypochlorite Spectropho-tometry / 中国药师

Objective:To establish a method for the content determination of total nitrogen in Nidus Vespae by salicylic acid and sodium hypochlorite spectrophotometry. Methods:The content of total nitrogen in Nidus Vespae from different areas with various batches was detected. Nidus Vespae was treated with sulfuric acid and hydrogen peroxide, and colored by salicylic acid and sodium hypochlo-rite. Using ammonium chloride as the control sample, the content of total nitrogen in the samples was tested at 650 nm. To ensure the method reliability, single factor experiments were performed to study the effects of temperature, reaction time and reagent dosage; or-thogonal experiments were used to screen optimum amounts of phosphate buffer solution, sodium salicylate solution and sodium hypo-chlorite solution. Results:The results showed that the optimum temperature was ambient, and the optimum time was 1. 5h. The opti-mum amount of phosphate buffer solution , sodium salicylate solution and sodium hypochlorite solution was 4 ml,7 ml and 1. 5 ml, re-spectively. The linear range of total nitrogen was 0. 06-0. 78 μg·ml-1(r=0. 9998), and the average recovery was 100. 98% (RSD=2. 10%,n=6). Conclusion:The method can be used to determine the total nitrogen content in Nidus Vespae. The total nitrogen content in Nidus Vespae is various in various areas with different batches.

Extraction Process Optimization of Fufang Jinsha Lidan Granule by Orthogonal Experiments / 中国药师

Objective:To optimize the extraction technology of Fufang Jinsha Lidan granule. Methods:According to the properties of traditional Chinese medicines in the formula, orthogonal experiments were used to optimize the extraction process of Fufang Jinsha Li-dan granule. The volume of water, boiling time and boiling frequency were used as the three influencing factors with three different lev-els in the orthogonal experiments. Moreover, the content of paeoniflorin and the yield of extract were chosen as the evaluation indices. The orthogonal experiments were carried out according to the L9 (34 ) orthogonal table. Results:The optimal extraction process of Fu-fang Jinsha Lidan granule was as follows:boiled twice, and one hour per time with 12-fold amount of water ( soaked for 30 min with 14-fold amount of water for the first extraction process) . Conclusion:The extraction process has such properties as high extraction rate, stability, simple operation, high yield of extract and controllable quality, which is worthy of wide application.

Optimization of the Extraction Process of Phenolic Antioxidant from Polyalthia Longifolia (Sonn.) Thawaites.

The research was carried out to optimize the extraction conditions of phenolic antioxidant from the leaves of Polyalthia longifolia. It was optimized by using L16 orthogonal design of experiment. The effect of single factors such as shaking speed, extraction time, modifier concentration and material ratio on the extraction of the phenolic antioxidant was investigated. The maximum phenolic antioxidant content was obtained under optimum conditions of shaking speed at 200 rpm, shaking time 10 min with material ratio of 1:10 and 80% of ethanol.

Optimizing the conditions for extraction of Daoguleebusi-7 capsule by orthogonal experiments / 国际中医中药杂志

Objective To research the optimal conditions for extraction of Daoguleebusi-7 capsule. Methods A comprehensive investigation for the process of extraction by water and ethanol was made using orthogonal experiments.Results The optimal process conditions were: gardenia and another drug were added into 12 volumes of water, extracted 2 times and two hours per time; Sophorae Flavescentis and other four dugs were added into 12 volumes of 85% ethanol,extracted 3 times and two hours per time, elecampane was crushed and screened through 100 mesh sieve to electuary.Conclusion The extraction process is simple and feasible for operation.

STUDY ON THE FERMENTATION CONDITION PRODUCING 2-KETO-LGLUCONIC ACID BY USING MIXED CULTURE OF MICROORGANISM / 微生物学通报

Vitamin C precusor-2-keto-L-gulonic acid can be prepared directly by mixed culture of Ghiconobacter oxy-dans SCB329 and Guconobacter subaxydans SCB110. To obtained its high yield, firstly, the proportion of the two micro- organisms, the ingredients of medium and the initial pH were optimized in shake flaskd, then L9 (34) orthogonal experiment confirmed that urea, C. S. L had high degree statistical meaning. Based on these data, an optimized fermentation media was obta ined: D-Sorbitol 9g, C. S.L1.5g, Urea1.5g, KH2PO40.1g, CaCO30.2g. By-product can be inhabited to the greatest extent and the yield increases by 20%.