Research interest on dental sealant in dentistry based on the 100 most cited articles: bibliometric analysis

Abstract The aim of this study was to identify and analyze the characteristics of the 100 most cited articles about dental sealants (DS) in dentistry. In September 2023, a search was performed in the Web of Science Core Collection (WoS-CC) database. The following information was extracted from each article: number and density of citations, year of publication, authorship, journal, impact factor, keywords, study design, theme, continent, country, and institution. The citations of the WoS-CC were compared with those of the Scopus and Google Scholar databases. The VOSviewer software was used to generate collaborative networks. The number of citations ranged from 33 to 205. The articles were published between 1961 and 2016. Buonocore MG (7%) was the most prominent author among the most cited. The Journal of the American Dental Association was the most frequent journal (25%) and Journal of Dental Research (7.6) had the highest impact factor. Most studies had interventional (41%) and laboratory (31%) designs, mainly addressing DS effectiveness in the prevention and control of dental caries (86%). There was a predominance of publications from North America (46%) and the USA was the country with the highest number of articles (44%). The most frequent institutions were the Centers for Disease Control and Prevention (USA) and the University of Rochester (USA) (6% each). "Retention" was the most frequent keyword. In conclusion, the 100 most cited articles were mostly interventional and laboratory studies, addressing the retention and efficacy of DS. Most of the articles were concentrated in North America and Europe, demonstrating a little collaboration from other continents.

Use of Sealants in Permanent Molars by Brazilian Dentist: A Comparative Study of Public versus Private

Abstract Objective: To compare the use of sealants in permanent molars between public and private dentists in Brazil. Material and Methods: This was a cross-sectional and analytical web survey study. The convenience sample consisted of dentists in Brazil who answered a pre-tested online form released via social media between July and October 2021. Descriptive analysis was performed using absolute and relative frequencies (%) and associations using the Chi-square test (p<0.05). Results: Brazilian professionals participated in the study (n=2,244). Comparing the professionals from the public service with those from the private service, the former had a higher positive perception of the use of sealants as a preventive (92.4% vs. 81.1%, p<0.00l) and therapeutic procedure (90.7% vs. 82.4%, p=0.00l), higher percentage of non-invasive (91.7% vs. 83.8%, p<0.00l) and invasive (22.8% vs. 12.0%, p< 0.001) techniques. Professionals from the private service reported more frequently that they did not use sealants than those from the public service (14.0% vs. 4.8%, p<0.00l). Resin sealant (97.7% vs. 94.9%, p=0.0l5) and Flow resin (62.0% vs. 54.3%, p=0.013) were the most used by professionals in the private service. The use of glass ionomer cement was not associated with the type of service (75.1% vs. 77.2%, p=0.172), nor was the use of adhesives (0.6% vs. 1.4%, p=0.195) or resin with Giomer technology (1.9% vs. 2.2%, p=0.856) (p>0.05). Conclusion: The percentage of use of sealants among dentists in Brazil is high, especially among professionals in the public service, and the most used materials were resinous sealants and glass ionomer cement.

Management of recurrent optic disc pit–associated maculopathy with human amniotic membrane graft in a pediatric case

Background: Optic disc pit–associated maculopathy (ODP-M) is a rare presentation in children. Therefore, only a few pediatric cases successfully managed have been reported in the literature. This video shows successful management of ODP-M with human amniotic membrane graft in a pediatric case presenting with recurrence with intraoperative optical coherence tomography (OCT). Purpose: To demonstrate a successful management of ODP-M with human amniotic membrane graft in a pediatric case presenting with recurrence. Synopsis: A 13-year-old patient who had been previously operated with 25-G pars plana vitrectomy with double internal limiting membrane peel and juxtapapillary endolaser with SF 6 gas tamponade for optic disc pit–associated maculopathy (ODP-M) presented with recurrence 9 months after primary surgery. Three 25-G sclerotomies were made and human amniotic membrane graft was tucked into the ODP; the position of the graft was confirmed with intraoperative ocular coherence tomography. Subretinal fluid rapidly resolved within 48 h and best-corrected visual acuity improved to 0.5 logMAR after one week. Later follow-ups showed no complications or recurrence. Highlights: This video shows successful management of ODP-M with human amniotic membrane graft in a pediatric case presenting with recurrence with intraoperative optical coherence tomography (OCT), without any additional tamponade.

Desenvolvimento e caracterização fisico-química de um selante resinoso com propriedades antimicrobianas associadas à incorporação do extrato do caule de Schinopsis brasiliensis (Braúna) / Development and physicochemical characterization of a resinous sealant with antimicrobial properties associated with the incorporation of Schinopsis brasiliensis (Braúna) stem extract

Introdução: os selantes resinosos possuem atividade preventiva e terapêutica da cárie dentária oclusal através da criação de uma barreira física que impede a adesão de biofilme. Não existem relatos destes materiais com propriedades antimicrobianas e, neste ensejo, a adição de princípios ativos obtidos de fitoterápicos configura como uma opção possível para resolver esta limitação. Objetivos: avaliar o potencial antimicrobiano do selante Fluroshield® enriquecido com o extrato do caule de Schinopsis brasiliensis (Braúna), bem como, a liberação do princípio ativo, grau de conversão, resistência de união imediata ao esmalte e padrão de falha dos materiais experimentais. Metodologia: trata-se de um estudo experimental in vitro. As cascas da Braúna foram secas a 40 ± 1 °C e o extrato etanólico foi obtido por percolação do pó da casca da Schinopsis brasiliensis. O selante comercial Fluroshield® (Dentsply) foi enriquecido com as proporções em massa (g) [0% (Controle), 20%, 10%, 5%, 2,5% e 1,25%]. Foi realizada a avaliação da Atividade antimicrobiana, a liberação do princípio ativo foi aferida através de Ultra Cromatografia Líquida de Alta Performance (UHPLC), o grau de conversão (GC) através do Micro-Raman, a resistência de união (RU) imediata ao esmalte foi avaliada através do microcisalhamento e padrão de fratura através de análise em estereomicroscópio. Os valores finais foram submetidos aos testes de normalidade Shapiro-Wilky (p > 0,05) e Levene. Os dados paramétricos foram submetidos a análise de variância (ANOVA one-way) com pós-teste de Tukey (p <0,05) e os não paramétricos através do teste de Kruskal-Wallis com pós-teste de Dunn's através do software GraphPad Prism 8 e Microsoft Excel 2018. Resultados: materiais com maior % de extrato apresentaram menor GC, não houve diferença estatisticamente significativa para RU entre os diferentes grupos, o padrão de fratura predominante foi adesiva, houve liberação do princípio ativo em meio aquoso em todos os materiais e os grupos com 20% e 10% de extrato em massa foram capazes de inibir a formação de biofilme de maneira semelhante ao controle positivo (clorexidina 0,12%). Conclusão: a adição do extrato de Schinopsis brasiliensis em concentrações entre 10% e 20% apresenta-se como uma alternativa promissora para a obtenção de propriedades antimicrobianas em selantes resinosos (AU).

Introduction: dental sealants have a preventive and therapeutic activity in the prevention and treatment of dental caries. However, there are no reports of these materials with antimicrobial properties and the addition of phytotherapy molecules would be an option to solve this limitation. Objectives: to evaluate the antimicrobial properties of the Fluroshield™ sealant with the addition of the stem extract of Schinopsis brasiliensis (Braúna), as well as the potential for releasing the active ingredient, degree of conversion and immediate enamel bond strength. Methodology: this is an experimental in vitro study. Braúna barks were dried at 40 ± 1 °C and the ethanolic extract was obtained by percolation of Schinopsis brasiliensis bark powder. The commercial sealant Fluroshield™ was enriched with the proportions by mass (g) [0% (Control), 20%, 10%, 5%, 2.5% and 1.25%]. The evaluation of the Inhibition of Biofilm Formation was carried out, the release of the active principle was measured with Ultra High Performance Liquid Chromatography (UHPLC), the immediate bond strength (BS) to the dental tissue was evaluated with microshear and the degree of conversion (DC) with Micro-Raman. Final values were submitted to Shapiro-Wilky (p > 0.05) and Levene normality tests. Parametric data were submitted to analysis of variance (one-way ANOVA) with Tukey's post-test (p <0.05) and nonparametric data through the Kruskal-Wallis test with Dunn's post-test using the GraphPad Prism software 8 and Microsoft Excel 2018. Results: materials with a higher % of extract had a lower DC, there was no statistically significant difference for BS between the different groups, there was release of the active principle in all materials and groups with 20% and 10 % of extract by mass were able to inhibit biofilm formation similarly to the positive control (0.12% chlorhexidine). Conclusion: the addition of Schinopsis brasiliensis extract in concentrations between 10% and 20% is a promising alternative for obtaining antimicrobial properties in resin sealants (AU).

Physicomechanical Properties of Resin-Based Pit and Fissure Sealants Reinforced with Rice Husk Derived Nano Silica and Nanohydroxyapatite

@#Resin-based pit fissure sealants (RBS) are used to prevent occlusal caries in children. The success of RBS in preventing dental caries is largely influenced by its retention on the tooth surface, which is also affected by its physicomechanical properties. The physicomechanical properties of RBS can be enhanced through the addition of fillers. With the advent of nanofillers, the physicomechanical properties were improved without altering RBS flowability. The present study developed an RBS with a 70 wt% resin matrix and 30 wt% nanofillers. The resin matrix consisted of urethane dimethacrylate (55 wt%), triethylene glycol dimethacrylate (45 wt%), camphoroquinone (0.3 wt%), and 2-(dimethylamino) ethyl methacrylate (0.7 wt%). Silane-treated rice husk-derived nanosilica (20 wt%) and nanohydroxyapatite (10 wt%) were added as fillers. Clinpro, Fissurit FX, and an unfilled sealant were controls. All RBS were tested for surface roughness, Vickers hardness, flexural strength, and flowability. Statistical analysis with oneway ANOVA revealed significant differences between groups in surface roughness, hardness, flowability (p < 0.001), flexural strength, and flexural modulus (p < 0.05). Experimental sealants had higher flexural strength (78 MPa) and flow distance (29.05+1.16 mm) than commercial controls.However, the surface roughness of experimental sealants (0.25+0.08 μm) was higher than Clinpro (0.087+0.027 μm) but lesser than Fissurit FX (0.35+0.19 μm). The Vickers hardness of experimental sealants (23+1.63 VHN) was less than Fissurit FX (28.80+1.69 VHN) but higher than Clinpro (21.74+1.68 VHN). This novel RBS had physicomechanical properties comparable to commercial sealants. The use of nanosilica from rice husk makes this pit and fissure sealer sustainable and environmentally friendly in dentistry.

Investigation of radioactivity level in an open-pit coal mine in Xinjiang, China and evaluation of personnel exposure dose / 中国辐射卫生

@#<b>Objective</b> To investigate and analyze the levels of γ dose rate and radon concentration at all sites in a large open-pit coal mine with radioactivity that had been mined for many years in Xinjiang, China, and to estimate the effective dose exposed to the personnel. <b>Methods</b> A portable γ dose-rate instrument FH40G was used for fixed-point monitoring of the mining area, and a continuous radon detector was used for 24 h continuous monitoring of radon concentration level in the site. The personnel exposure dose was estimated according to the measured γ dose rate and radon concentration. <b>Results</b> In this open-pit coal mine, the range of γ dose rate was 51.4-435.8 nGy/h; the mean 24 h radon concentration was 15-25 Bq/m³; the range of annual effective dose to the personnel was 0.29-1.29 mSv/a. <b>Conclusion</b> According to the results of the survey, radon concentration levels at all sites are low, and no remedial action is required. The personnel exposure dose at most of the sites is far below the standard requirements, and some protective measures need to be taken in some areas of the dump.

Research progress on fluoride-releasing restorative materials for caries control / 口腔疾病防治

@#Restorative materials such as conventional glass ionomer cement (CGIC), resin-modified glass ionomer cement (RMGIC), polyacid-modified composite resin (compomer), and giomer have the properties of fluoride release and refill, which may prevent or slow down the progression of caries. The caries resistance of these materials was evaluated according to the following criteria: fluorine-releasing ability, antibacterial activity, mechanical properties and anti-aging properties. The anti-caries effect of these materials mainly depends on the effect of fluoride ions on mineralization. However, materials with strong fluorine release ability, such as CGIC, are mainly used in pediatric dentistry and temporary restoration due to their poor mechanical properties. It is difficult to achieve both fluoride ion release potential and mechanical strength, and there are few materials that can provide ideal mechanical strength while maintaining a high standard of fluoride release. The fluoride releasing and recharging capacity of CGIC, RMGIC, compomer and giomer decrease successively. The trend of material modification, to a certain extent, tends to sacrifice the fluoride release capacity of materials to maintain the ideal mechanical strength. In recent years, scholars have tried to add a variety of fillers to further enhance the anti-cracking ability of materials and add antibacterial agents to compensate for the anti-caries effect to reduce the loss of fluoride release.

Mechanisms of PiT2-loop7 Missense Mutations Induced Pi Dyshomeostasis / 神经科学通报·英文版

PiT2 is an inorganic phosphate (Pi) transporter whose mutations are linked to primary familial brain calcification (PFBC). PiT2 mainly consists of two ProDom (PD) domains and a large intracellular loop region (loop7). The PD domains are crucial for the Pi transport, but the role of PiT2-loop7 remains unclear. In PFBC patients, mutations in PiT2-loop7 are mainly nonsense or frameshift mutations that probably cause PFBC due to C-PD1131 deletion. To date, six missense mutations have been identified in PiT2-loop7; however, the mechanisms by which these mutations cause PFBC are poorly understood. Here, we found that the p.T390A and p.S434W mutations in PiT2-loop7 decreased the Pi transport activity and cell surface levels of PiT2. Furthermore, we showed that these two mutations attenuated its membrane localization by affecting adenosine monophosphate-activated protein kinase (AMPK)- or protein kinase B (AKT)-mediated PiT2 phosphorylation. In contrast, the p.S121C and p.S601W mutations in the PD domains did not affect PiT2 phosphorylation but rather impaired its substrate-binding abilities. These results suggested that missense mutations in PiT2-loop7 can cause Pi dyshomeostasis by affecting the phosphorylation-regulated cell-surface localization of PiT2. This study helps understand the pathogenesis of PFBC caused by PiT2-loop7 missense mutations and indicates that increasing the phosphorylation levels of PiT2-loop7 could be a promising strategy for developing PFBC therapies.

Risk factors analysis and prediction model construction of submucosal deep infiltration of early colorectal tumor / 中华肿瘤杂志

Objective: To investigate the risk factors for the development of deep infiltration in early colorectal tumors (ECT) and to construct a prediction model to predict the development of deep infiltration in patients with ECT. Methods: The clinicopathological data of ECT patients who underwent endoscopic treatment or surgical treatment at the Cancer Hospital, Chinese Academy of Medical Sciences from August 2010 to December 2020 were retrospectively analyzed. The independent risk factors were analyzed by multifactorial regression analysis, and the prediction models were constructed and validated by nomogram. Results: Among the 717 ECT patients, 590 patients were divided in the within superficial infiltration 1 (SM1) group (infiltration depth within SM1) and 127 patients in the exceeding SM1 group (infiltration depth more than SM1). There were no statistically significant differences in gender, age, and lesion location between the two groups (P>0.05). The statistically significant differences were observed in tumor morphological staging, preoperative endoscopic assessment performance, vascular tumor emboli and nerve infiltration, and degree of tumor differentiation (P<0.05). Multivariate regression analysis showed that only erosion or rupture (OR=4.028, 95% CI: 1.468, 11.050, P=0.007), localized depression (OR=3.105, 95% CI: 1.584, 6.088, P=0.001), infiltrative JNET staging (OR=5.622, 95% CI: 3.029, 10.434, P<0.001), and infiltrative Pit pattern (OR=2.722, 95% CI: 1.347, 5.702, P=0.006) were independent risk factors for the development of deep submucosal infiltration in ECT. Nomogram was constructed with the included independent risk factors, and the nomogram was well distinguished and calibrated in predicting the occurrence of deep submucosal infiltration in ECT, with a C-index and area under the curve of 0.920 (95% CI: 0.811, 0.929). Conclusion: The nomogram prediction model constructed based on only erosion or rupture, local depression, infiltrative JNET typing, and infiltrative Pit pattern has a good predictive efficacy in the occurrence of deep submucosal infiltration in ECT.

Assessment of influence of LED curing units used on microhardness of resin-modified glass ionomer sealants

Aim: Resin modified glass ionomer (RMGI) is class of material that can be used as sealant for preventing and arresting the progression of caries in pits and fissures. As these are hybrid materials, their properties can be affected by factors related to the polymerization process. Therefore, this study aimed to evaluate the influence of different generations of LED curing units (Elipar DeepCure-L and VALO Grand) on Knoop microhardness values (KHN) of RMGI sealants (Clinpro XT and Vitremer). Methods: Forty cylindrical specimens (6mm ø x 1 mm high) were prepared according to the manufacturer's instructions and divided into four groups (n=10) according to the type of RMGI and LED used. The KHN of the top surface of each sample was calculated 7 days after light-curing. Data were submitted to two-way ANOVA (α = 0.05). Results: Vitremer had higher KHN values than Clinpro XT after using both LEDs (p<0.0001), but especially when light-cured with the use of VALO Grand (p<0.0001). Whereas the KHN value of Clinpro was not influenced by the LED device (p>0.05). Conclusions: Top surface microhardness values of RGMI sealants were affected by both material composition and generations of LED curing units used. Third generation LED curing units seemed to be more efficient for the polymerization of RMGI-based sealants

VANISHING MOUNTAINS: A STUDY OF ILLEGAL MINING IN THE ARAVALLIS OF SOUTH-WESTERN DISTRICTS OF HARYANA AND ITS EFFECT ON THE PHYSICAL ENVIRONMENT AND HUMAN LIFE

Illegal mining activities have been rampant since decades. These activities have literally changed the face of the landscape. The mountains have disappeared, surface have been left dotted with deep mining pits, villagers have to live a substandard life due to the negative effects of mining in the form of decreased water quality, poor air quality, mining related accidents, damaged houses because of stone blasting and much more. The authorities have turned a blind eye towards the common man's problem and thus the residents of nearby villages are left with no choice but to live under silence. The unscientific and illegal mining practices in the south- west region of Haryana in the districts of Mehandargarh, Dadri and Bhiwani has altered the physical landscape and affected the socio cultural life of nearby villages to a great extent. The study is a step in the direction of describing how an anthropogenic activity if done without any rules and order and in unscientific manner can affect the environment to unimaginable

Unilateral double optic nerve head pits with foveo-schisis detachment treated by modified internal limiting membrane peeling technique

A 44?year?old female with a vision of 10/200 in the right eye had double pits in the temporal segment of the optic disc with serous macular detachment. Spectral?domain optical coherence tomography (SD?OCT) confirmed serous retinal detachment, an outer layer hole, and double optic disc pits. The patient underwent pars plana vitrectomy with modified ILM flap surgery involving fovea?sparing internal limiting membrane peeling (FSIP) technique with inverted ILM flap tucking with gas tamponade. Post surgery, the communications between perineural and intraretinal spaces were obliterated with flaps of ILM covering the pits, with reduced serous macular detachment and BCVA of 20/120. FSIP with inverted internal limiting membrane flap tuck can be an effective technique to manage rare cases of double ODP?M

Management of recurrent optic disc pit–associated maculopathy with human amniotic membrane graft in a pediatric case

Background: Optic disc pit–associated maculopathy (ODP-M) is a rare presentation in children. Therefore, only a few pediatric cases successfully managed have been reported in the literature. This video shows successful management of ODP-M with human amniotic membrane graft in a pediatric case presenting with recurrence with intraoperative optical coherence tomography (OCT). Purpose: To demonstrate a successful management of ODP-M with human amniotic membrane graft in a pediatric case presenting with recurrence. Synopsis: A 13-year-old patient who had been previously operated with 25-G pars plana vitrectomy with double internal limiting membrane peel and juxtapapillary endolaser with SF 6 gas tamponade for optic disc pit–associated maculopathy (ODP-M) presented with recurrence 9 months after primary surgery. Three 25-G sclerotomies were made and human amniotic membrane graft was tucked into the ODP; the position of the graft was confirmed with intraoperative ocular coherence tomography. Subretinal fluid rapidly resolved within 48 h and best-corrected visual acuity improved to 0.5 logMAR after one week. Later follow-ups showed no complications or recurrence. Highlights: This video shows successful management of ODP-M with human amniotic membrane graft in a pediatric case presenting with recurrence with intraoperative optical coherence tomography (OCT), without any additional tamponade.

Effect of fluoride varnish, glass ionomer and resin sealant on the prevention of pit and fissure caries in young children / 口腔疾病防治

Objective @# To study the effect of fluoride varnish, glass ionomer and resin sealant on the prevention of pit and fissure caries in young children, and to identify an a method to reduce the sensitivity of operation technique to prevent pit and fissure caries in young children with limited moisture isolation.@*Methods@# A self-control design was used to select 370 young children aged 3 to 5. Eight molars in the mouth were distributed in four quadrants, and each quadrant was randomly allocated to the blank group, fluoride varnish Duraphat group, glass ionomer GC FujiⅦ group, and resin ClinproTM Sealant group. The retention rate of pit and fissure sealant and the incidence of primary molar caries were observed in the 6th, 12th, 24th and 36th months respectively.@* Results @# In the 6th month, 12th month and 24th month, there were no significant differences in the material retention rate between the GC Fuji Ⅶ group and ClinproTM Sealant group. In the 36th month, the retention rate of the ClinproTM sealant group was better than that of the GC Fuji Ⅶ group (P < 0.05). In the 6th month, the caries incidence in the Duraphat group, GC Fuji Ⅶ group and ClinproTM sealant group was significantly lower than that in the blank group (P < 0.001). There was no significant difference between the Duraphat group, GC Fuji Ⅶ group and ClinproTM sealant group. In the 12th month, 24th month and 36th month, the incidence of caries in the GC Fuji Ⅶ group and ClinproTM sealant group was lower than that in the Duraphat group and blank group (P < 0.001), but there was no significant difference between the blank group and Duraphat group, and there was no significant difference in caries incidence between the GC Fuji Ⅶ group and ClinproTM sealant group.@*Conclusion @#The GC Fuji Ⅶ and ClinproTM sealant treatments continuously and effectively prevented pit and fissure caries compared with simple fluoride application. However, in cases of limited cooperation and poor moisture isolation in young children, the preventive measures of glass ionomer pits and fissure sealants (GC Fuji Ⅶ) are simpler and more feasible.

Setae and sensilla in the Iberian Myrmeleon Linnaeus, 1767 larvae (Insecta, Neuroptera: Myrmeleontidae)

ABSTRACT Myrmeleon (tribe Myrmeleontini) is the most successful genus within Myrmeleontidae in number of species. This is probably due to its pit-building behavior, a famous adaptation of antlion larvae but present only in a few genera of the family. In the Iberian Peninsula, where only two other genera are able to construct these traps (Euroleon in tribe Myrmeleontini and Myrmecaelurus in tribe Myrmecaelurini), five species of Myrmeleon are present: M. formicarius, M. gerlindae, M. inconspicuus, M. almohadarum and M. hyalinus. There are some useful characters to tell apart the larvae of these species using optical microscope, including the disposition of digging setae or some color spots. In this work, we study the type of setae on these species in their larval stage using SEM. The type of bristles, digging setae, and the rest of sensilla found are not different in shape, surface or structure between species. All of these confer them a great equipment in their psammophilous lifestyle.

The effect of Pit-Crew cardiopulmonary resuscitation on the quality of chest compression / 中华急诊医学杂志

Objective:To observe the effect of team resuscitation with Pit-Crew cardiopulmonary resuscitation (CPR) mode on improving the quality of chest compression.Methods:A control method was conducted in this study. Sixty-four medical staffs in ICU and Emergency departments were divided into the role division group and non-role division group according to the ratio of doctors to nurses, with 8 teams in each group and 4 staffs in each team. A team leader was appointed in each team of the role division group to organize and coordinate the whole CPR process, and the non-role division group was not appointed. Each team performed chest compression for 8 min according to the recommendations of the 2020 AHA CPR Guideline under the monitoring of the CPR quality tracking system using a resuscitation manikin. CPR time, chest compression fraction (CCF), times of pressing interruption, times of pressing exceeding standard interruption (>10 s), pressing frequency, chest full recoil rate and other parameters were observed and recorded. The computer system recorded the above parameters, Student's t test and Mann-Whitney U test were used to compare the differences of indexes between the two groups. Results:After the training, the role division group achieved higher CCF [(69.13±1.55)% vs. (59.13 ± 6.08)%, P<0.05], and the total time was significantly shorter and times of overshoot interruptions was significantly less in the role division group compared with the non-role division group [(79.88±28.76) s vs. (135.25±32.99) s; 4 (3, 5) times vs. 2 (1, 2) times respectively; P<0.01]. There were no statistical differences in the total time of CPR and interruption numbers ( P>0.05). In addition, there were also no statistically significant differences in the pressing total numbers, correct times, pressing frequency, pressing depth, and the full rebound times of compression, as well as the substandard indicators of compression such as pressing too fast, too slow, too deep and insufficient rebound times of compression (all P>0.05). Conclusions:Pit-Crew CPR mode with designated team leader contributes to the implementation of high quality CPR, and the monitoring of CPR quality parameters and the applying of real-time feedback system can effectively improve the quality of chest compression.

Effect of Saliva/Blood Contamination on Enamel Bond Strength / Efeito da Contaminação de Saliva/Sangue na Força de União ao Esmalte

Abstract In the routine clinical situation, the contamination by blood and/or saliva in restorative procedures can be happen in non-cooperation of the patient in dental office. The aim of the study was to assess in vitro shear bond strength of a resin sealant associated with two types of adhesives contaminated with saliva and blood. Healthy human molars were used and the specimens and the crowns were sectioned in the bucco-lingual direction, thus obtaining two segments of similar proportions (mesial and distal), totaling 60 surfaces, and the surfaces were randomly divided into 4 groups (n = 15). Group I (control) received no type of contamination and the sealant was applied. In group II, the surfaces were contaminated with 10 µl of saliva/blood and the sealant was applied. In group III, the surfaces were contaminated with 10 µl of saliva/blood and the Single Bond total-etch adhesive system was applied followed by application of sealant. In group IV, the surfaces were contaminated with 10 µl of saliva/blood and the Prime & Bond NT total-etch adhesive system was applied followed by the application of sealant. Samples were tested in the universal testing machine and the analysis of shear bond strength was performed. A difference between Group I (12.61MPa) and the other groups was found; Group II (2. 28MPa) was different than Groups III (7.07MPa) and IV (7.79MPa), but Groups III and IV were similar. The application of an adhesive system when there is contamination with saliva/blood is required prior to application of pit and fissure sealants. (AU)

Resumo Na situação clínica de rotina, a contaminação por sangue e/ou saliva em procedimentos restauradores pode ocorrer em pacientes que não colaboram no consultório odontológico. O objetivo do estudo foi avaliar a resistência ao cisalhamento in vitro de um selante de resina associado a dois tipos de adesivos contaminados com saliva e sangue. Foram utilizados molares humanos saudáveis e os espécimes e as coroas foram seccionados na direção bucal-lingual, obtendo assim dois segmentos de proporções semelhantes (mesial e distal), totalizando 60 superfícies, e as superfícies foram divididas aleatoriamente em 4 grupos (n = 15). O Grupo I (controle) não recebeu nenhum tipo de contaminação e o selante foi aplicado. No grupo II, as superfícies foram contaminadas com 10 µl de saliva / sangue e o selante foi aplicado. No grupo III, as superfícies foram contaminadas com 10 µl de saliva / sangue e o sistema adesivo Single-Bond foi aplicado seguindo a aplicação de selante. No grupo IV, as superfícies foram contaminadas com 10 µl de saliva / sangue e o sistema adesivo de ataque total Prime & Bond NT foi aplicado seguido da aplicação de vedante. As amostras foram testadas na máquina de ensaio universal e a análise da resistência à ligação ao cisalhamento foi realizada. Uma diferença entre o Grupo I (12,61MPa) e os outros grupos foi encontrada; O Grupo II (2,28 MPa) foi diferente dos Grupos III (7,07MPa) e IV (7,79 MPa), mas os Grupos III e IV foram semelhantes. A aplicação de um sistema adesivo quando existe contaminação com saliva / sangue é necessária antes da aplicação de selantes de fissura e fissura.

Pit and fissure depth in the enamel of mandibular third molars / Profundidad de fosas y fisuras en el esmalte de terceros molares inferiores

ABSTRACT The aim of this descriptive ex vivo study was to evaluate qualitatively the depth of pit and fissures (P&F) of the enamel in human mandibular third molars. Fifty (n=50) extracted human mandibular third molars were cleaned and disinfected. All tooth surfaces were coated with nail varnish except for a 1-mm margin around the periphery of the occlusal surface. The teeth were immersed for 48 hours at 37 °C in 1% methylene blue dye solution prepared in artificial saliva. After cleaning, the crowns were separated from the root at the cementoenamel junction and subsequently sectioned longitudinally in buccolingual direction at the location of the central fossa. All sections were examined using a stereoscopic microscope and photographed. The images were downloaded on a computer. The length of penetration of the P&F was recorded using the following scoring system: C1: P&F extended to half of the enamel thickness; C2: P&F extended beyond half of the enamel thickness without reaching the dentine-enamel junction; C3: P&F extended to the dentine-enamel junction. For pits, C1, C2 and C3 were observed in 35, 9 and 6 teeth, respectively, while for fissures, C1, C2 and C3 were observed in 15, 18 and 17 teeth, respectively. The P&F detected in the samples extended to the deepest portions of enamel, quite frequently reaching the enamel-dentine junction. Clinicians should recognize that even if pits and fissures are not clinically obvious, they penetrate deep into the enamel and frequently reach the dentine-enamel junction. Effective treatment is recommended to block access to P&F, thus preventing ingress of bacteria.

RESUMEN Objetivos: El objetivo del presente estudio descriptivo fue evaluar cualitativamente mediante un ensayo ex vivo la profundidad de las fosas y fisuras (F&F) del esmalte en terceros molares inferiores humanos. Materiales y métodos: Cincuenta (n=50) terceros molares inferiores sanos extraídos se lavaron, se descontaminaron y se recubrieron con esmalte para uñas hasta 1 mm menos del área de las F&F. Luego se sumergieron durante 48 horas a 37°C en una solución de azul de metileno al 1% (pH 7,4) preparada con saliva artificial. Posteriormente se lavaron y se separaron las coronas a nivel del límite amelocementario. En cada molar se realizó una sección longitudinal de 1 mm de espesor con orientación vestíbulo-lingual a nivel de la fosa central. Las secciones fueron analizadas con microscopio estereoscópico y fotografiadas. Las imágenes se transfirieron a una computadora. Se determinó cualitativamente la extensión de las F&F en el espesor del esmalte y se las clasificó de acuerdo a 3 categorías. C1: extensión hasta la mitad del espesor del esmalte; C2: extensión que supera la mitad del espesor del esmalte sin afectar el límite amelodentinario; C3: extensión que llega al límite amelodentinario. Resultados: Para las fosas, 35, 9 y 6 especimenes correspondieron a las categorías C1, C2 y C3 respectivamente. Para las fisuras, 15, 18 y 17 especimenes correspondieron a las categorías C1, C2 y C3 respectivamente. Conclusiones: Las fosas y fisuras de la muestra analizada se extienden hasta la zona más profunda del espesor del esmalte. Con cierta frecuencia llegan hasta el límite amelodentinario.

Research progress on nano-calcium phosphate modified dental materials for the prevention and treatment of dental pulp diseases / 口腔疾病防治

@#Nanomaterials usually refer to tiny particles with a diameter of 1-100 nm, which often have unique physicochemical properties and are one of the main areas of research interest for development of dental biomaterials. Nano-calcium phosphate modified dental materials have been widely used in pit and fissure sealing, dental resin restoration, tooth adhesion, and root canal sealing. The current research shows that the dental material modified by nano-calcium phosphate has stronger mechanical properties and shows long-term calcium and phosphorus ion release and excellent ion recharging ability, which can promote the remineralization of tooth hard tissue and has good prospects for application. However, it is difficult to accurately simulate the complex environment of the oral cavity. Therefore, the biocompatibility, cytotoxicity and effect of clinical application of nano-calcium phosphate modified dental materials still needs further study. This review summarizes and discusses the recent research progress regarding nano-calcium phosphate modified dental materials in the prevention and treatment of dental pulp diseases.