Effects of plateau environment on tear indexes and related anatomical structures of rabbits / 国际眼科杂志(Guoji Yanke Zazhi)

AIM: To investigate the effects of hypobaric hypoxia in plateau on tear indexes and related anatomical structures in rabbits.METHODS: A total of 18 healthy New Zealand rabbits were selected and randomly divided into plateau group and control group, with 9 rabbits(18 eyes)in each group. The plateau group was housed in the Simulated Climate Cabin for Special Environment of Northwest of China, simulating hypobaric hypoxia at an altitude of 6 000 m. The control group was housed in a clean animal room with atmospheric pressure and oxygen. Changes in the tear meniscus height and non-invasive tear break-up time were detected by using RHCT-1 corneal topographer dry eye comprehensive analysis system, changes in tear secretion was measured by Schirmer Ⅰ test, before intervention and on the 3, 7 d, 2 and 4 wk. Meanwhile, the changes in tear composition before and after intervention in the plateau environment were analyzed using Raman Spectroscopy. The histopathological changes of the lower lid conjunctiva, cornea, lacrimal gland, and Hardarian gland were observed by hematoxylin-eosin(HE)staining after 4 wk of intervention, and the expression of mucin 5AC(MUC5AC)in conjunctiva was detected by immunohistochemistry.RESULTS: Compared with the control group, Schirmer Ⅰ test, tear meniscus height, first and average non-invasive tear break-up time in the plateau group decreased significantly since 3 d, and the difference was significant with the extension of observation time(P<0.05). The above indexes increased from 2 wk. After 4 wk of intervention, the protein and lipid content of the tear composition of rabbits in the plateau group increased, and the nucleic acid content decreased compared with the pre-intervention period. Compared with the control group, rabbits in the plateau group showed thickening of corneal stromal edema, an increase in the number of conjunctival cup cells, increase in the level of expression of MUC5AC, an increase in the level of expression of MUC5AC, an atrophy and flattening of cytoplasm in lacrimal epithelial cells, an enlargement of glandular lumen, and no obvious destructive changes in the Hardarian glands.CONCLUSION: Acute plateau environment can destroy the homeostasis of rabbit ocular surface, so that the tear secretion and the tear film stability decreases, but within a certain period of time, rabbits undergo compensation with the habituation to the hypobaric hypoxia environment, which can increase the tear secretion to a certain extent and restore the tear film stability.

Raman Spectroscopy Analysis of The Temporal Heterogeneity in Lung Cell Carcinogenesis Induced by Benzo(a)pyrene / 生物化学与生物物理进展

ObjectiveTemporal heterogeneity in lung cancer presents as fluctuations in the biological characteristics, genomic mutations, proliferation rates, and chemotherapeutic responses of tumor cells over time, posing a significant barrier to effective treatment. The complexity of this temporal variance, coupled with the spatial diversity of lung cancer, presents formidable challenges for research. This article will pave the way for new avenues in lung cancer research, aiding in a deeper understanding of the temporal heterogeneity of lung cancer, thereby enhancing the cure rate for lung cancer. MethodsRaman spectroscopy emerges as a powerful tool for real-time surveillance of biomolecular composition changes in lung cancer at the cellular scale, thus shedding light on the disease’s temporal heterogeneity. In our investigation, we harnessed Raman spectroscopic microscopy alongside multivariate statistical analysis to scrutinize the biomolecular alterations in human lung epithelial cells across various timeframes after benzo(a)pyrene exposure. ResultsOur findings indicated a temporal reduction in nucleic acids, lipids, proteins, and carotenoids, coinciding with a rise in glucose concentration. These patterns suggest that benzo(a)pyrene induces structural damage to the genetic material, accelerates lipid peroxidation, disrupts protein metabolism, curtails carotenoid production, and alters glucose metabolic pathways. Employing Raman spectroscopy enabled us to monitor the biomolecular dynamics within lung cancer cells in a real-time, non-invasive, and non-destructive manner, facilitating the elucidation of pivotal molecular features. ConclusionThis research enhances the comprehension of lung cancer progression and supports the development of personalized therapeutic approaches, which may improve the clinical outcomes for patients.

Effect of hydrofluoric acid concentration and aging on the bond strength ceramics to a resin cement

Abstract This study evaluated the influence of hydrofluoric acid (HF) concentration and thermal cycling on the microshear bond strength (µSBS) of a resin luting agent to IPS e.max® CAD and Rosetta® SM. Ceramic specimens (12.0 x 14.0 x 1.5mm) were randomized into 8 groups (n=10) according to HF concentration, commercial brand, and aging. Immediately after polishing, and etching, all specimens were silanized and a layer of adhesive was applied. A PVS mold of 3 mm thickness and 10mm diameter with (four) 1.0mm holes was fabricated, placed on each specimen, and then filled with a resin luting agent. Half of the specimens were subjected to the µSBS test using an Instron at a speed of 1.0 mm/min, following a 24-hour storage in deionized water at 37ºC. The remaining specimens were subjected to thermal cycling (5ºC-55ºC, 30 seconds per bath) and µSBS. The data were evaluated utilizing a three-way ANOVA and Tukey's post-hoc test (α=0.05). Significant differences were found for HF concentration and aging (p<0.0001). No significant difference in µSBS was found for commercial brands (p=0.085). The interaction between brand and HF concentration (p=0.358), brand and aging (p=0.135), and HF concentration and aging (p=0.138) were not statistically significant. The triple interaction among these factors was not statistically significant (p=0.610). In conclusion, the bond strength is affected by the HF concentration. No statistical difference was observed between the two ceramics. Thermal cycling significantly reduced µSBS.

Resumo Este estudo avaliou a influência da concentração do ácido fluorídrico (AF) e da ciclagem térmica na resistência de união ao microcisalhamento (RUµC) de um cimento resinoso para IPS e.max® CAD e Rosetta® SM. Espécimes cerâmicos (12,0 x 14,0 x 1,5mm) foram divididos em 8 grupos (n=10) de acordo com concentração do HF, marca comercial e envelhecimento. Imediatamente após o polimento e condicionamento ácido, todos os espécimes foram silanizados e uma camada de adesivo foi aplicada. Um molde PVS de 3 mm de espessura e 10 mm de diâmetro com (quatro) orifícios de 1,0 mm foi confeccionado, colocado em cada espécime e preenchido com o cimento resinoso. Metade dos espécimes foi submetida ao teste RUµC na Instron a velocidade de 1,0 mm/min, após 24 horas de armazenamento em água deionizada a 37ºC. Os espécimes restantes foram submetidos a ciclagem térmica (5ºC-55ºC, 30 segundos por banho) e a RUµC. Os dados foram avaliados por ANOVA de três fatores e ao teste post-hoc de Tukey (α=0,05). Diferenças significativas foram encontradas para concentração de HF e envelhecimento (p<0,0001). Nenhuma diferença significativa na RUµC foi encontrada para cada marca comercial (p=0,085). A interação entre marca comercial e a concentração do HF (p=0,358), marca comercial e envelhecimento (p=0,135) e concentração do HF e envelhecimento (p=0,138) não foram estatisticamente significativas. A tripla interação entre esses fatores não foi estatisticamente significativa (p=0,610). Concluindo, a resistência de união é afetada pela concentração de HF. Não foi observada diferença estatística entre as duas cerâmicas. A ciclagem térmica reduziu significativamente a resistência de união ao microcisalhamento.

Cytotoxic effects on human dental pulp stem Cells after exposure to adhesive bonding agents

Abstract Studies regarding cytotoxic effects attributed to the use of adhesive bonding agents on pulp tissue are not conclusive. To point out whether these materials are safe for clinical use, in vivo exposure of dental pulp to adhesive bonding agents was simulated using an experimental setup in which Human Dental Pulp Stem Cells (hDPSC) are exposed to the action of two kinds of adhesives: self-etching adhesives and two-step bonding agents through a dentine barrier. Cytotoxic effects on these cells were evaluated by MTT assay protocol and fluorescence microscopy, and their results were contrasted to those obtained through Raman spectra taken on single hDPSCs. Overall, no significant cytotoxic effects were observed by combining all the techniques, and cell viability close to 90% was achieved for a dentine barrier of at least 1 mm thick. Moreover, Raman spectroscopy was able to detect structural DNA damage in some dental pulp cells when exposed to two-step bonding agents, suggesting that this technique could be considered a complementary tool with the potential to evaluate cell toxicity beyond cell viability.

Resumo Os estudos sobre os efeitos citotóxicos atribuídos ao uso de agentes de união adesivo no tecido pulpar não são conclusivos. Para determinar se esses materiais são seguros para uso clínico, a exposição in vivo da polpa dentária a agentes de união adesiva foi simulada por meio de uma configuração experimental na qual as células-tronco da polpa dentária humana (hDPSC) são expostas à ação de dois tipos de adesivos: adesivos autocondicionantes e agentes de união de duas etapas por meio de uma barreira de dentina. Os efeitos citotóxicos nessas células foram avaliados pelo protocolo de ensaio MTT e microscopia de fluorescência, e seus resultados foram contrastados com os obtidos por meio de espectros Raman obtidos em hDPSCs individuais. De modo geral, não foram observados efeitos citotóxicos significativos com a combinação de todas as técnicas, e a viabilidade celular próxima a 90% foi obtida para uma barreira de dentina de pelo menos 1 mm de espessura. Além disso, a espectroscopia Raman foi capaz de detectar danos estruturais ao DNA em algumas células da polpa dentária quando expostas a agentes de colagem de duas etapas, sugerindo que essa técnica poderia ser considerada uma ferramenta complementar com potencial para avaliar a toxicidade celular além da viabilidade celular.

Effect of experimental bleaching gels with polymers Natrosol and Aristoflex on the enamel surface properties

Abstract Natrosol and Aristoflex® AVC polymers are widely applied in the cosmetic industry and have recently been applied as a thickener option in the composition of dental bleaching gels, with the purpose to reduce the adverse effects on enamel mineral components. The aim of this study was to evaluate the color variation (ΔE* ab, ΔE00, ∆WID), surface roughness (Ra), and mineral content quantification (Raman Spectroscopy) of dental enamel after bleaching treatment with experimental gel-based on 10% carbamide peroxide (CP), containing Carbopol, Natrosol, and Aristoflex® AVC. Sixty bovine teeth were randomly divided into 6 groups (n=10): Negative Control (NC) - no treatment; Positive Control (PC) - Whiteness Perfect 10% - FGM; CP with Carbopol (CPc); CP with Natrosol (CPn); CP with Aristoflex® AVC (CPa); NCP - no thickener. Data were analyzed, and generalized linear models (∆WID -T0 x T1) were used for repeated measurements in time for Ra and with a study factor for ΔE* ab and ΔE00. For the evaluation of the mineral content, data were submitted to one-way ANOVA and Tukey tests. For enamel topographic surface analysis the Scanning Electron Microscope (SEM) was performed. A significance level of 5% was considered. ΔE* ab and ΔE00 were significantly higher for CPc, CPn, CPa, and NCP groups. (∆WID) showed a significantly lower mean than the other groups for NC in T1. After bleaching (4-hour daily application for 14 days), Ra was higher in the CPc, CPn, and PC groups. For CPa, Ra was not altered. No significant difference was found in the quantification of mineral content. CPa preserved the surface smoothness more effectively. Aristoflex® AVC is a viable option for application as a thickener in dental bleaching gels, presenting satisfactory performance, and maintaining the whitening efficacy of the gel, with the advantage of preserving the surface roughness of tooth enamel without significant loss of mineral content.

Resumo Os polímeros Natrosol e Aristoflex® AVC são amplamente utilizados na indústria cosmética e foram recentemente aplicados como uma opção de espessante na composição de géis de clareamento dental, com o objetivo de reduzir os efeitos adversos sobre os componentes minerais do esmalte. O objetivo deste estudo foi avaliar a variação de cor (ΔE*ab, ΔE00, ∆WID), rugosidade da superfície (Ra), e quantificação do conteúdo mineral (Raman Spectroscopy) do esmalte dentário após clareamento dental com gel experimental baseado em 10% de peróxido de carbamida (CP), contendo Carbopol, Natrosol e Aristoflex® AVC. Sessenta dentes bovinos foram divididos aleatoriamente em 6 grupos (n=10): Controle Negativo (CN) - sem tratamento; Controle Positivo (CP) - Brancura Perfeita 10% - FGM; CP com Carbopol (CPc); CP com Natrosol (CPn); CP com Aristoflex® AVC (CPa); NCP - sem espessante. Os dados foram analisados e modelos lineares generalizados (∆WID -T0 x T1) foram usados para medições repetidas no tempo para Ra e com um fator de estudo para ΔE*ab e ΔE00. Para a avaliação do conteúdo mineral, os dados foram submetidos a testes unidirecionais de ANOVA e Tukey. Para a análise da superfície topográfica do esmalte, o Microscópio Eletrônico de Varredura (SEM) foi realizado. Um nível de significância de 5% foi considerado. ΔE*ab e ΔE00 foram significativamente maiores para os grupos CPc, CPn, CPa e NCP. (∆WID) mostrou uma média significativamente menor do que os outros grupos para NC em T1. Após o clareamento (aplicação diária de 4 horas por 14 dias), Ra foi maior nos grupos CPc, CPn e PC. Para CPa, Ra não foi alterado. Nenhuma diferença significativa foi encontrada na quantificação do conteúdo mineral. O CPa preservou a suavidade da superfície de forma mais eficaz. Aristoflex® AVC é uma opção viável para aplicação como espessante em géis de clareamento dental, apresentando desempenho satisfatório e mantendo a eficácia clareadora do gel, com a vantagem de preservar a rugosidade da superfície do esmalte dentário sem perda significativa de conteúdo mineral.

Real-time SERS monitoring anticancer drug release along with SERS/MR imaging for pH-sensitive chemo-phototherapy

In situ and real-time monitoring of responsive drug release is critical for the assessment of pharmacodynamics in chemotherapy. In this study, a novel pH-responsive nanosystem is proposed for real-time monitoring of drug release and chemo-phototherapy by surface-enhanced Raman spectroscopy (SERS). The Fe3O4@Au@Ag nanoparticles (NPs) deposited graphene oxide (GO) nanocomposites with a high SERS activity and stability are synthesized and labeled with a Raman reporter 4-mercaptophenylboronic acid (4-MPBA) to form SERS probes (GO-Fe3O4@Au@Ag-MPBA). Furthermore, doxorubicin (DOX) is attached to SERS probes through a pH-responsive linker boronic ester (GO-Fe3O4@Au@Ag-MPBA-DOX), accompanying the 4-MPBA signal change in SERS. After the entry into tumor, the breakage of boronic ester in the acidic environment gives rise to the release of DOX and the recovery of 4-MPBA SERS signal. Thus, the DOX dynamic release can be monitored by the real-time changes of 4-MPBA SERS spectra. Additionally, the strong T2 magnetic resonance (MR) signal and NIR photothermal transduction efficiency of the nanocomposites make it available for MR imaging and photothermal therapy (PTT). Altogether, this GO-Fe3O4@Au@Ag-MPBA-DOX can simultaneously fulfill the synergistic combination of cancer cell targeting, pH-sensitive drug release, SERS-traceable detection and MR imaging, endowing it great potential for SERS/MR imaging-guided efficient chemo-phototherapy on cancer treatment.

Identification of Quantized Characterization of Liver Meridian Based on Raman Spectrum of Chinese Medicinal Materials / 世界科学技术-中医药现代化

Objective Based on the comparison and analysis of Raman spectra of liver meridian(including other meridian)and non-liver meridian(other meridian excluding liver meridian)traditional Chinese medicine,the accurate quantitative characterization data of liver meridian was obtained,and the liver meridian identification model was established and analyzed.Methods Taking 120 non-liver meridian(other meridian excluding liver meridian)traditional Chinese medicines(TCMs)as blank control and 120 liver-meridian(including other meridian)TCMs as experimental medicines,Raman spectra of 240 TCMs were obtained after sample pretreatment and Raman spectroscopy detection,and then quantified in units of 1 cm-1.Then combined with Random Forest(Random Forest,RF),Artificial Neural Network(Artificial Neural Network,ANN)and other algorithms,we constructed the identification models of quantized characterization of liver meridian.Results Compared with non-liver meridian(other meridian excluding liver meridian)TCMs,the Raman spectra of the liver meridian TCM were generally lower in the whole detection range,especially in the range of 200-1100 cm-1.The quantized Raman spectrogram data combined with ANN presented the best discrimination results with accuracy,precision>0.871,the receiver operating characteristic curve(ROC)was drawn and the area under ROC curve(AUC)was obtained,with AUC>0.921.Conclusion The Raman spectrogram of TCMs has significant correlation with liver meridian,which can be used as a whole quantized characterization of liver meridian.Combined with ANN,Raman spectrogram can carry out identification analysis efficiently and accurately,which is conducive to solving the bottleneck problem of lacking accurate data on medicinal properties and enriching the scientific connotation of attributing meridians.

Advances in the diagnosis of bladder cancer based on Raman spectroscopy / 中华泌尿外科杂志

Bladder cancer is one of the common tumors of urinary system. Early detection and treatment can reduce the recurrence rate and mortality. Currently, it is difficult to balance the diagnostic specificity and sensitivity of traditional diagnostic methods. However, Raman spectroscopy, as a molecular diagnostic technology, can reveal the difference between normal urinary tract epithelial tissue and urinary tract epithelial cell carcinoma of the bladder at the molecular level, which has the characteristics of faster and more accurate diagnosis compared with traditional diagnostic techniques. This paper reviews the research progress of Raman spectroscopy in the diagnosis of bladder cancer.

Distinguishing subgingival plaques of patients with chronic periodontitis and type 2 diabetes mellitus based on Raman spectroscopy / 中国医科大学学报

Objective The aim of this study is to combine Raman spectroscopy and machine learning techniques to distinguish subgin-gival plaques among three groups of subjects,including patients with chronic periodontitis(CP)and type 2 diabetes mellitus(T2DM),patients with CP alone,and healthy controls.Methods The Raman spectra of the subgingival plaques from 20 patients with CP and T2DM(group A),23 patients with CP alone(group B),and 23 healthy controls(group C)were obtained using a portable Raman spec-trometer.Eight common machine learning algorithms were applied to build models to distinguish the Raman spectra of the three types of subgingival plaques.Results The model identified as optimal for distinguishing the three types of subgingival plaques was linear discri-minant analysis(LDA).The optimal model to distinguish groups A and B is LDA,groups A and C is extra trees(ET),and groups B and C group is LDA.Conclusion The proposed classification model based on Raman spectroscopy and machine learning algorithms can dis-tinguish subgingival plaques among patients with CP and T2DM,with CP alone,and healthy controls.This technique can be used in future clinical practice as a screening or diagnostic tool.

Raman Spectroscopy of six explanted acrylic hydrophobic foldable intraocular lenses with glistening

Purpose: To study and interpret Raman spectra of six explanted acrylic hydrophobic foldable intraocular lenses (HFIOLs) with grade six microvacuoles and to understand the possible mechanism for microvacuole formation. Methods: Clinical data, slit-lamp photographs, and optical microphotographs of the explanted analytes were obtained. RS of the analytes were registered using a confocal Raman microscope (Lab RAM HR Evolution, Horiba Jobin Yvon) and Horiba Lab Space 6 Spectroscopy Suite software. Data were interpreted by identifying the functional group and fingerprint region of the spectra about the available literature. Results: IOLs were explanted for visual impairment after an average interval of 11.2 years following implantation. Each of the HFIOLs exhibited distinctive and identical Raman bands at the frequency range of 200–1,800, 2,600–3,000, and 3,200–3,700 cm?1 which were identified with those reported in the literature. The unique bands and peaks of the spectra were specific to the functional groups, its ring and other stretching variations, hydroxyl group, and water molecule. A spike at 1,640 cm?1 revealed the presence of monomer and indicated material bioincompatibility of the samples. Conclusion: Raman spectroscopy (RS) was found specific and an effective tool to detect the material change in the HFIOL and constituents of polymer biomaterial about microvacuole formation and also suggested modification and development of a more biocompatible and non-biodegradable polymer blend where RS could be a monitoring tool.

Analysis of changes in neoadjuvant chemotherapy for breast cancer based on Raman spectroscopy / 中华内分泌外科杂志

Objective:To explore the relationship between the changes of serum components in breast cancer after neoadjuvant chemotherapy and the efficacy of chemotherapy based on Raman spectroscopy.Methods:Raman spectra of serum samples from 110 breast cancer patients who received neoadjuvant chemotherapy and 15 healthy subjects admitted to the Department of Breast and Thyroid Surgery of the Affiliated Tumor Hospital of Xinjiang Medical University from Feb. 2013 to Jan. 2020 were detected, and PCA-LDA method was combined to predict the efficacy of neoadjuvant chemotherapy.Results:Raman spectra of breast cancer patients after neoadjuvant chemotherapy were similar to those of normal breast, with carotenoid peaks (1513 cm -1, 1518 cm -1) . Raman spectra combined with PCA-LDA showed high sensitivity and specificity (80.0%, 71.4%) in evaluating the efficacy of neoadjuvant chemotherapy for breast cancer. Conclusion:Raman spectroscopy combined with multivariate data analysis can be used as a new method to evaluate the efficacy of neoadjuvant chemotherapy for breast cancer and a new strategy to guide subsequent treatment regiments.

Investigation of the API distribution homogeneity in lyophilized product-pemetrexed disodium for injection by confocal micro-Raman spectroscopy mapping / 药学学报

The method of homogeneity evaluation for active pharmaceutical ingredient (API) spatial distribution in lyophilized product was investigated for the first time with confocal micro-Raman spectroscopy mapping, using pemetrexed disodium for injection as a model drug. Certain areas of the lyophilized product were scanned to obtain Raman spectra. The classical method ("peak clipping" method) was employed for mapping with characteristic Raman peaks of the API and the excipient. Due to the API being finely dispersed in the excipient in lyophilized products, the classical method cannot discriminate between the two ingredients making the distribution homogeneity difficult to evaluate. The "ratio of characteristic peak intensities" method was then utilized. Using this method, the relative intensity of the characteristic Raman peaks of the API to the excipient was applied for mapping and the relative content of API to excipient was calculated for a homogeneity evaluation of the drug distribution. The validation of this method showed a good linear relationship between the relative intensity and the relative content of API to excipient (r2 > 0.99), and the precision and recovery were adequate for homogeneity evaluation of API by Raman spectroscopy mapping. Five products of pemetrexed disodium for injection from different manufacturers were tested through Raman maps applying this method and the histograms of relative Raman intensity were also plotted by frequency to help the homogeneity evaluation of drug distribution. The results showed that there were obvious differences in the drug distribution homogeneity from different products, where a more homogeneous API distribution was found in the brand product. This research provides a reliable method for the homogeneity evaluation of API distribution, which facilitates quality evaluation and process optimization of lyophilized products.

Overview of surface-enhanced Raman spectroscopy in combination with other detection techniques / 药学实践杂志

As an increasingly mature analytical technique, surface-enhanced Raman spectroscopy has the ability to identify, detect, and even quantitatively measure many single substances in nature. However, in the actual sample analysis, the tested samples were often a mixed system of various substances, and it was impossible to accurately characterize the components of the mixed system only by relying on SERS technology. Therefore, SERS combined with other techniques to accurately determine the measured substances has become an inevitable trend. Through the combination, the deficiency of SERS in detection and characterization was improved, and the purpose of efficient, sensitive and accurate determination of substances to be measured was achieved.

Characterization of sound enamel and natural white spot lesions / Caracterização de esmalte hígido e lesões de mancha branca naturais

Objective: To compare optical, morphological, chemical, and physical aspects of the sound enamel and white spot lesions (WSL) classified as ICDAS 2. Material and Methods: Seventeen human molars with one surface presenting WSL and a sound surface (2 x 2 mm window) were characterized by Quantitative light-induced fluorescence (QLF ®), Optical coherence tomography (OCT), microhardness, and Raman spectroscopy. The ANOVA and Tukey's test were used at 5% significance level. Results: The QLF comparison between distinct substrates yielded decreased ∆Q (integrated fluorescence loss) of -15,37%mm2 and -11,68% ∆F (fluorescence loss) for WSL. The OCT detected mean lesion depth of 174,43 µm. ANOVA could not detect differences in the optical attenuation coefficient between the substrates (p>0.05). Lower microhardness measures were observed in WSL than on sound enamel (p<0.05). The Raman spectra showed four vibrational phosphate bands (v1, v2, v3, v4), where the highest peak was at 960.3 cm-1(v1) for both substrates. However, a 40% decrease in phosphate (v1) was detected in WSL. The peak at 1071 cm-1 was higher for sound enamel, indicating the presence of a phosphate band instead of the B-type carbonate. The spectra showed higher intensity of the organic composition at 1295 cm-1 and 1450 cm -1 for WSL. Conclusion: Non-invasive QLF, OCT and Raman spectroscopy were able to distinguish differences in fluorescence, optical properties, and organic/inorganic components, respectively, between sound enamel and WSL, validated by the destructive microhardness analysis. (AU)

Objetivo: Comparar os aspectos ópticos, morfológicos, químicos e físicos do esmalte sadio e das lesões de mancha branca naturais, classificada como ICDAS 2. Material e métodos: Dezessete molares humanos com uma face apresentando uma lesão de mancha branca natural e outra face o esmalte hígido (2 x 2 mm) foram caracterizados utilizando a Fluorescência quantitativa induzida pela luz (QLF ®), Tomografia de coerência óptica (OCT), Microdureza e Espectroscopia Raman. A ANOVA e o teste de Tukey foram utilizados ao nível de significância de 5%. Resultados: A comparação entre os substratos distintos, utilizando o QLF ® demonstrou uma diminuição no ∆Q (perda de fluorescência integrada) de -15,37%mm2 e -11,68% de ∆F (Perda de fluorescência) para a lesão de mancha branca. O OCT detectou uma profundidade média de lesão de 174,43µm. A ANOVA não detectou diferenças no coeficiente de atenuação óptica entre os substratos (>0,05). Microdureza significantemente menor foi detectada nas lesões de mancha branca do que no esmalte sadio (p<0,05). Os espectros Raman mostraram quatro bandas vibracionais do fosfato (v1,v2,v3,v4), onde o maior pico foi em 960,3cm-1para ambos os substratos. No entanto, uma diminuição de 40% no fosfato (v1) foi detectada na lesão. O pico em 1071cm-1foi maior para o esmalte hígido, demonstrando tratar-se da banda do fosfato, ao invés do carbonato tipo B. Os espectros apresentaram maior intensidade da composição orgânica em 1295cm-1e 1450 cm-1para a lesão de mancha branca. Conclusão:Os métodos não invasivos QLF, OCT e espectroscopia Raman foram capazes dediferenciar a fluorescência, propriedades ópticas e conteúdo orgânico/inorgânico do esmalte sadio comparado com esmalte com lesões de mancha branca, sendo validado pela análise de microdureza. (AU)

Advances in characterization of pharmaceutical polymorphisms by vibrational spectroscopy / 药学学报

The determination and characterization of solid drug form polymorphisms plays an important role in drug quality control, selection of the production process and clinical efficacy evaluation. Vibrational spectroscopy is a powerful method for the characterization of drug polymorphisms. In this paper we review recent research and application advances in the polymorphic characterization of active pharmaceutical ingredients (APIs) and drug cocrystals/salts by using Fourier transform infrared (FTIR) and Raman spectroscopy to elucidate the characteristics of APIs and drug complexes. This may provide theoretical support for structural analysis during the development process for drugs.

Research progress on the methods of observation and analysis of dental bonding interfaces / 口腔疾病防治

@#Dental bonding technology and materials have been used widely in dentistry because of their excellent properties. The development of novel bonding technology and materials is constantly being performed to improve the effect of dental bonding restorations. Observation and analysis of the dental bonding interface is one of the most important methods for laboratory evaluation of bonding efficiency. This paper aims to review the methods of observation and analysis of dental bonding interfaces to provide a reference for the selection of evaluation methods in dental bonding research. The features of 6 methods, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), confocal laser scanning microscopy (CLSM), Raman spectroscopy (RS), optical coherence tomography (OCT) and atomic force microscopy (AFM), were described and summarized. Among these methods, SEM and TEM are used most often in the analysis of fine structures; CLSM and OCT are used for the acquisition of characteristic image signals, such as microleakage and exogenous and endogenous fluorescence; and RS and AFM can test chemical composition and mechanical properties.

Effect of combining photoinitiators on cure efficiency of dental resin-based composites

Abstract Camphorquinone is the most conventionally used photoinitiator in Dentistry. Although different alternative photoinitiators have been proposed, no photoinitiator was capable of completely substituting camphorquinone. The combination of photoinitiators has been considered the best alternative. Objectives: To evaluate the effect of combining Norrish type I and II photoinitiators on the cure efficiency of dental resin-based composites. Methodology: Experimental composites were produced containing different photoinitiator systems: Norrish type I-only, mono-alkyl phosphine oxide (TPO); Norrish type II-only, camphorquinone (CQ); or its combination, CQ and TPO, in a 1: 1 molar ratio. UV-vis absorption spectrophotometry was performed to assess the consumption of each photoinitiator after curing (n=3). A multi-wave LED (Bluephase® G2, Ivoclar Vivadent) was pre-characterized and used with a radiant exposure of 24 J/cm2. The degree of conversion was evaluated by Raman spectrometry, and the elution of the monomers by nuclear magnetic resonance analysis (n=3). Data were analyzed using ANOVA and Tukey's test (α=0.05; β=0.2). Results: The combination of CQ and TPO increased the consumption of the photoinitiator system compared to CQ-only (p=0.001), but presented similar consumption compared to TPO-only (p=0.52). There was no significant difference in the degree of conversion between the composites regardless of the photoinitiator system (p=0.81). However, the elution of the monomers was reduced when both photoinitiators were combined. TPO-based material presented the highest elution of monomers. Conclusions: The combination of the photoinitiator systems seems to be beneficial for the cure efficiency of dental resin-based composites.

Identification of structural analogues xanthine, theophylline and theobromine by surface-enhanced Raman spectroscopy / 药学实践杂志

Objective To distinguish the structural analogues xanthine, theophylline and theobromine by surface-enhanced Raman spectroscopy. Methods Concentrated silver colloid enhancement reagent was prepared as the Raman substrate to increase the number of "hot spots" per unit area, improve the sensitivity of surface-enhanced Raman spectroscopy, enhance the signal strength of the samples and achieve the effective discrimination of structural analogues. Meanwhile, the feasibility of surface-enhanced Raman spectroscopy in practical application was verified by determining serum samples of three mixtures. Results The concentrated silver colloid greatly increased the Raman intensity of the three structural analogues. The spectra of each individual compound and the mixture in the serum system was obtained. The detection limit of the three substances in aqueous solution were 0.005, 0.01 and 0.005 μmol/L respectively. Conclusion Surface-enhanced Raman spectroscopy is a potent technique for distinguishing structural analogues. It is rapid, sensitive and nondestructive to samples. Hence, it can be widely used in the fields of detection, analysis, clinical treatment and diagnosis.

Evaluation of microleakage and the degree of conversion of three composite resins polymerized at different power densities / Avaliação da microinfiltração e do grau de conversão de três resinas compostas polimerizadas em diferentes densidades de potência

Objectives: This study aims to evaluate the degree of conversion (DC) and microlekage scores of three different composite resins polymerized with a LED curing device in standard and extra-power mode. Material and Methods: One bulk-fill (Tetric EvoCeram Bulk-Fill ­ TECBF) and two conventional composite materials (Clearfil Majesty Posterior ­ CMP and Tetric EvoCeram ­ TEC) were evaluated. A total of 30 specimens were prepared for six groups (N = 5). These groups were polymerized with a LED curing device as follows: TECBF-6: 3200mW/cm2 for six seconds, TECBF-20: 1000mW/cm2 for 20 seconds, CMP-6: 3200mW/cm2 for six seconds, CMP-20: 1000mW/cm2 for 20 seconds, TEC-6: 3200mW/cm2 for six seconds, TEC - 20: 1000 mW/cm2 for 20 seconds. After 24 hours of water storage, DC was measured by Raman spectroscopy. Microleakage scores of the six groups were bonded to various adhesive systems (Clearfil SE Bond or Adhese Bond Universal) were also evaluated at Class II box cavities (N = 10). Results: While the highest DC was found at the top (TECBF-20= 79.92% and TECBF-6= 79.02%) and bottom surfaces (TECBF-20 = 68.94% and TECBF-6= 71.04%) for TECBF groups, TEC groups (TEC-20top = 59.06%, TEC-6top=49.66%, TEC-20bottom = 43.72% and TEC-6bottom= 40.68%) showed the lowest DC for the both surfaces (p < 0.05). Polymerization of materials in standard or extra-power mode was similar to DC (p > 0.05). Microleakage scores were found to be similar (p > 0.05). Conclusion: According to the results of the study, different power densities of LED curing light did not affect the DC of composite resins and microleakage values of restorations at small Class II cavities (AU)

Objetivo: este estudo tem como objetivo avaliar os graus de conversão (DC) e microinfiltração de três diferentes resinas compostas polimerizáveis com um dispositivo de luz por LED nos modos padrão e no modo de alta-potência. Material e métodos: uma resina bulk-fill (Tetric EvoCeram Bulk-Fill - TECBF) e dois materiais resinosos convencionais (Clearfil Majesty Posterior - CMP e Tetric EvoCeram - TEC) foram avaliados. Um total de 30 espécimes foram preparados e divididos em seis grupos (N = 5). Esses grupos foram polimerizados com um dispositivo de luz de LED da seguinte forma: TECBF-6: 3200mW / cm2 por seis segundos, TECBF-20: 1000mW / cm2 por 20 segundos, CMP-6: 3200mW / cm2 por seis segundos, CMP20: 1000mW / cm2 por 20 segundos, TEC-6: 3200mW / cm2 por seis segundos, TEC - 20: 1000 mW / cm2 por 20 segundos. Após 24 horas de armazenamento em água, a DC foi medida por espectroscopia Raman. Os escores de microinfiltração dos seis grupos dos vários sistemas adesivos (Clearfil SE Bond ou Adhese Bond Universal) também foram avaliados nas cavidades Classe II (N = 10). Resultados: embora a maior CD tenha sido encontrada nas partes superior (TECBF-20 = 79,92% e TECBF-6 = 79,02%) e inferiores (TECBF-20 = 68,94% e TECBF-6 = 71,04%) para grupos TECBF, os grupos TEC (TEC-20top = 59,06%, TEC-6top = 49,66%, TEC-20bottom = 43,72% e TEC-6bottom = 40,68%) apresentaram as menores CD para as ambas as partes (p < 0,05). A polimerização de materiais no modo padrão ou alta-potência foi semelhante à DC (p > 0,05). Os escores de microinfiltração foram semelhantes (p > 0,05). Conclusão: de acordo com os resultados do estudo, diferentes densidades de potência da luz de LED não afetaram as CD das resinas compostas e os valores de microinfiltração das restaurações em pequenas cavidades da Classe II. (AU)

Does the addition of vitamin E to conventional UHMWPE improve the wear performance of hip acetabular cups? Micro-Raman characterization of differently processed polyethylene acetabular cups worn on a hip joint simulator

In knee replacements, vitamin E-doped ultra-high molecular weight polyethylene (UHMWPE) shows a better wear behavior than standard UHMWPE. Therefore, different sets of polyethylene (PE) acetabular cups, i.e. standard UHMWPE and cross-linked polyethylene irradiated with 50 kGy and 75 kGy, were compared, at a molecular level, with vitamin E-doped UHMWPE to evaluate their wear performance after being tested on a hip joint simulator for five million cycles. Unworn control and worn acetabular cups were analyzed by micro-Raman spectroscopy to gain insight into the effects of wear on the microstructure and phase composition of PE. Macroscopic wear was evaluated through mass loss measurements. The data showed that the samples could be divided into two groups: 1) standard and vitamin E-doped cups (mass loss of about 100 mg) and 2) the cross-linked cups (mass loss of about 30-40 mg). Micro-Raman spectroscopy disclosed different wear mechanisms in the four sets of acetabular cups, which were related to surface topography data. The vitamin E-doped samples did not show a better wear behavior than the cross-linked ones in terms of either mass loss or morphology changes. However, they showed lower variation at the morphological level (lower changes in phase composition) than the UHMWPE cups, thus confirming a certain protecting role of vitamin E against microstructural changes induced by wear testing.