In vitro anti-Candida activity of Melaleuca cajuputi extracts

Aims@#The rise of drug-resistant infectious diseases worldwide has spurred experts' interest in developing safe and effective alternative medicine. Melaleuca cajuputi extracts have been shown to exhibit antimicrobial activity in vitro against various bacterial species. This study evaluated the antimicrobial activity of local M. cajuputi leaf extracts (MCEs) against Candida albicans.@*Methodology and results@#Phytoconstituents of aqueous and ethanolic MCEs were screened conventionally using chemical tests. Broth microdilution assay and scanning electron microscope (SEM) were performed to study the anti-Candida activity of the extracts. Both MCEs contained terpenoids, phenols, flavonoids and tannins. Aqueous and ethanolic MCEs showed good fungicidal activity against the tested organism with minimum inhibitory concentration (MIC) values of 50 mg/mL and 25 mg/mL, respectively and a minimum fungicidal concentration (MFC) to MIC ratio of less or equal to 2. Scanning electron micrographs revealed yeast cell surface morphology alterations when treated with both MCEs at 1× MIC.@*Conclusion, significance and impact of study@#In conclusion, MCEs have anti-Candida properties and thus, M. cajuputi extract could be an excellent potential source of natural antimicrobial agents for disease remedies.

The architecture of alveolar capillaries in the lungs of bactrian camels (Camelus bactrianus) / Arquitectura de los capilares alveolares de pulmones de camellos bactrianos (Camelus bactrianus)

SUMMARY: The Bactrian camel, which is native to China and Mongolia, is large in size and is an even-toed ungulate species. The double humps on the Bactrian camel back differentiate it from the dromedary camel, which has a single hump. This species has adapted to unsuitable conditions (lack of food and water) in the Gobi Desert and is advanced in unique anatomical and physiological characteristics during a prolonged evolution period. Several studies have been conducted on the anatomical features of the Bactrian camel, but none have given attention to the alveolar capillaries of the Bactrian camel lung. Therefore, the current study aims to explore the architecture of the alveolar capillary in the Bactrian camel lung and further explain the mechanism of blood flow in its lung. The current study extracted and examined the architecture of the alveolar capillary in the lung of the Bactrian camel (Camelus bactrianus) and further explained the mechanism of blood flow by performing lung casting and replica scanning electron microscopy methods. The reports showed that the resources of the alveolar-capillary originated from the capillaries of the subpleural space or interlobular septulum, sometimes originating from the precapillary arterioles or directly from the terminal arterioles. The alveolar capillaries anastomosed and formed a single layer of dense, basket-like network surrounding the alveolus. The mash diameter of the alveolar-capillary network was larger than that of the capillary, and the appearance of the mash was oval and elliptical. Many of the collapsed alveolar-capillary networks were found in the alveolar microvascular architecture in the lung of the Bactrian camel. The study found that, due to many collapsed alveoli in the Bactrian camel lung, the disproportional pressure between the pulmonary alveoli induced less imbalance of blood flow in the alveolar capillary, which affected the gas exchange efficiency. Therefore, the function of the anastomosing capillary branch was likely to regulate the blood flow between the alveolar-capillary network.

RESUMEN: El camello bactriano, es originario de China y Mongolia, es de gran tamaño y es una especie de ungulado de dedos pares. Las dobles jorobas del lomo del camello bactriano lo diferencian del dromedario, que tiene una sola joroba. Esta especie se ha adaptado a condiciones inadecuadas (falta de alimento y agua) en el desierto de Gobi y ha avanzado en características anatómicas y fisiológicas únicas durante un período de evolución prolongado. Se han realizado varios estudios sobre las características anatómicas del camello bactriano, pero ninguno ha prestado atención a los capilares alveolares del pulmón de este animal. Por lo tanto, el presente estudio tuvo como objetivo principal explorar la arquitectura del capilar alveolar en el pulmón del camello bactriano y explicar el mecanismo del flujo sanguíneo. A partir de nuestro trabajo se examinó la arquitectura del capilar alveolar en el pulmón del camello bactriano (Camelus bactrianus) mediante la realización de métodos de microscopía electrónica de barrido y escaneo pulmonar. Los informes mostraron que los recursos del alvéolo-capilar se originaban en los capilares del espacio subpleural o del tabique interlobulillar y a veces se originaban en las arteriolas precapilares o directamente en las arteriolas terminales. Los capilares alveolares se anastomosaban y formaban una densa red de capa única en forma de cesta que rodeaba el alvéolo. El diámetro del macerado de la red alveolar-capilar era mayor que el del capilar y el aspecto del macerado era ovalado y elíptico. Muchas de las redes alvéolo-capilares colapsadas se encontraron en la arquitectura microvascular alveolar en el pulmón del camello bactriano. El estudio encontró que, muchos alvéolos colapsados en el pulmón del camello bactriano, la presión desproporcionada entre los alvéolos pulmonares inducía un menor desequilibrio del flujo sanguíneo en el capilar alveolar, lo que afectaba la eficiencia del intercambio de gases. Por lo tanto, la función de la rama capilar anastomosante probablemente regularía el flujo sanguíneo entre la red alveolar-capilar.

SEM and XRD Identification of Mineral Chinese Medicine Alumen, Calcined Alumen, and Their Processed Products / 中国实验方剂学杂志

Objective: Ammonium alum is a common counterfeit of Alumen,and the processed product of ammonium alum is a common counterfeits of calcined Alumen. This paper aims to establish a method for identifying Alumen,calcined Alumen,ammonium alum and their processed products. Method: The samples were analyzed by scanning electron microscope (SEM) and X ray diffraction (XRD) in this paper. Result: Ammonium alum and Alumen showed obvious changes in morphology after processing. Both Alumen and ammonium alum showed obvious differences in morphology at×250 and×1 000 times microscope. Alumen presented irregular fragments,clear edge corners,smooth surface,scattered irregular small particles,occasional holes and longitudinal edges. Ammonium alum presented irregular clumps,blunt edges,not obvious edges and corners,uneven surface,scattered smaller and round-like particles. The difference in morphology was not obvious at×250 times microscope between Alumen and ammonium alum processed products. While at×1 000 times,the surface of calcined Alumen was uneven with coarse particles; the surface of counterfeit calcined Alumen was flat,and the coarse particle characteristics were not obvious. XRD can be used to rapidly and accurately identify the primary phase of Alumen,calcined Alumen,ammonium alum and ammonium alum processed products:KAl(SO4)2·12H2O,NH4Al(SO4)2·12H2O,KAl(SO4)2,and NH4Al(SO4)2 respectively, with 2θ angle characteristic value of 23,12,22 and 5 respectively for XRD peak. Conclusion: SEM and XRD techniques can be used for the identification of Alumen,calcined Alumen,ammonium alum and their counterfeit products.

Ultrastructure observations on antennal sensilla of Heortia vitessoides the most serious pest of Aquilaria sinensis / 中国中药杂志

Heortia vitessoides is the most serious pest of Aquilaria sinensis,which is an economically important evergreen tree native to China and is the principal source of Chinese agarwood. In severe infestations,the insects completely eat up the leaves of A. sinensis,causing severe economic losses. In a more recent study,we found that the antennal sensilla of adult play important roles in the host location,mating and oviposition of H. vitessoides. Here,the external morphology of the antennal sensilla of H. vitessoides were examined using scanning electron microscopy. The result showed that the antennae of both sexes of H. vitessoides were filiform in shape,which consist of the scape,pedicel and about 64 segments of flagellomeres. Eight morphological sensilla types were recorded in both sexes,including sensilla trichodea,sensilla chaetica,sensilla basiconica,sensilla coeloconica,sensilla styloconica,sensilla auricillica,sensilla squamiformia and böhm bristle. Major differences were recorded in the distribution and quantity of different sensilla types in each segment of antenna. The sensillas are almost confined to the ventral and lateral surfaces rather than the back side of antennae. Antennal flagella contained the most sensilla while the scape and pedicel segments only contained böhm bristles and sensilla squamiformias. Sensilla trichodea Ⅲ were only found on male antennae. These results are discussed in relation to the possible roles of the sensilla types in the host location,mating and oviposition selection behavior of H. vitessoides.

Palpos labiales de la mariposa Prestonia clarki (Lepidoptera: Pieridae). Ultraestructura de órganos sensoriales y sensilas / Labial palps of the butterfly Prestonia clarki (Lepidoptera: Pieridae). Ultrastructure of sensilla and sensory organs

Resumen Los trabajos sobre palpos labiales son muy escasos en Lepidoptera y requieren del uso del microscopio electrónico de barrido. Los tres artejos de los palpos labiales de la coliadina Prestonia clarki se describen e ilustran, así como la distribución de las sensilas y de sus estructuras más distintivas: la mancha sensitiva de Reuter y el órgano Palp pit; el artejo basal es de mayor longitud y el distal el de menor. Se encontraron sensilas quéticas tipo 1 en la superficie de la vista lateral externa de los tres artejos. Las sensilas son más especializadas en el parche o mancha sensitiva de Reuter y en el órgano Palp pit. En la vista lateral interna de la sección proximal del artejo basal se observó esa mancha, la cual comprende un área alargada que integra cientos de microtriquias, diferenciada en tres secciones, cuya área adyacente muestra menor número de microtriquias y de menor longitud. En un corte longitudinal del artejo distal, en su porción más apical, se observó el órgano Palp pit, con forma de botella; en su interior se alojan dos tipos de estructuras, cuya disposición fue: sensilas celocónicas en la sección basal y microtriquias en la distal. Además, se encontraron en el interior del Palp pit dos tipos sensilares de difícil determinación, se denominaron sensilas quéticas tipos 2 y 3, así como las sensilas quéticas tipo 1, localizadas en el borde del Palp pit. Los tipos encontrados y su distribución en el Palp pit coinciden con lo descrito por varios autores en otras especies de lepidópteros.

Abstract Research on labial palps of Lepidoptera is scarce and requires the use of Scanning Electron Microscopy techniques. We describe and illustrate the three segments composing the labial palps of the Coliadinae butterfly Prestonia clarki, as well as the distribution of sensilla and both of palp's distinctive structures: the Reuter's sensitive patch and the Palp pit organ; in the palps, the basal segment is the longest, and the distal segment is the shortest. We found chaetic sensilla type 1 on the lateral outer surface of the segments. In the Reuter's sensitive patch and the Palp pit organ, sensilla are specialized. In a lateral internal view of the proximal section of the basal segment, Reuter's sensitive patch looks as an elongated area with hundreds of microtrichia, differentiated into three sections; the adjacent area shows fewer microtrichia of shorter length. In a longitudinal view of the distal segment, at the apex of the segment, is the bottle-shaped Palp pit organ; inside the Palp pit are coeloconic sensilla in the basal section and microtrichia in the distal one. In addition, two indeterminate types of sensilla similar to chaetic ones were found within the Palp pit; which we called chaetic sensilla types 2 and 3; chaetic sensilla type 1 are located on the edge of the Palp pit. The sensilla types and their distribution in the Palp pit agree with those described in other species of Lepidoptera. Rev. Biol. Trop. 66(3): 1324-1346. Epub 2018 September 01.

Chemical and Microscopy Characterization of Trans-Endodontic Implants / Caracterización química y microscópica de implantes trans-endodónticos

Abstract Trans-endodontic implants are an artificial extension through root apex anchored in periradicular bone tissue. The aim is to improve the crown-root ratio and to provide stability to dental organ present. Zirconium oxide (ZrO2) is a material of great technological importance, having good natural color, high strength, high toughness, high chemical stability, does not suffer any corrosion, chemical and microbial resistance and excellent esthetic properties. Objective: The aim of this study was to evaluate chemical and microscopy of surface conditions of ZrO2 trans-endodontic implant. Materials and Methods: A blocks of ZrO2 were manufactured for produce trans-endodontic implants and divided in two groups: monoclinic and tetragonal phase. They were evaluated using Scanning Electroning Microscope (SEM), EnergyDispersive X-ray Spectroscopy (EDS), and Atomic Force Microscope (AFM) and Vickers Micro hardness. Results: The Monoclinic phase through AFM analysis showed roughness Ra = 0.320μm, whereas in the Tetragonal phase was 0.126μm, SEM/EDX indicated that the phases are not properly uniform and the addition of the Yttrium to favor the stabilization of the Tetragonal phase. The Vickers hardness analysis showed a value of 1500HV. Conclusion: The characterization of the surface of trans-endodontic zirconium oxide implants provides a guideline to know the surface characteristics of the material, since a greater roughness on the surface of the implant will favor the Osseo-integration capacity.

Resumen Los implantes trans-endodónticos son una extensión artificial a través del ápice radicular anclado en el tejido óseo periradicular. El objetivo es mejorar la relación corona-raíz y proporcionar estabilidad al órgano dental presente. El óxido de zirconio (ZrO2) es un material de gran importancia tecnológica, con buen color natural, alta resistencia, alta tenacidad, alta estabilidad química, no sufre corrosión, resistencia química y microbiana y excelentes propiedades estéticas. Objetivo: El objetivo de este estudio fue evaluar las condiciones superficiales de ZrO2 para su aplicación clínica a los implantes transendodónticos. Materiales y Métodos: se trituraron bloques de ZrO2 en implantes trans-endodónticos y se dividieron en: monoclínico y tetragonal. Luego se evaluaron mediante microscopía electrónica de barrido (SEM), espectroscopia de rayos X de energía dispersiva (EDS) y microscopio de fuerza atómica (AFM) y microdureza vickers. Resultados: La fase monoclínica a través del análisis AFM presenta Ra = 0.320 μm, mientras que en la fase Tetragonal es 0.126 μm, SEM / EDS muestra que las fases no son adecuadamente uniformes y la adición del Ytrio para favorecer la estabilización de la fase tetragonal. El análisis de microdureza mostro un valor de 1500HV. Conclusión: La caracterización de la superficie de los implantes trans-endodónticos de óxido de zirconio, brinda una pauta para conocer las características superficiales del material, ya que al haber una mayor rugosidad en la superficie del implante se verá favorecida la capacidad de oseointegración.

In vitro shear bond strength between fluorinated zirconia ceramic and resin cements

PURPOSE: The purpose of this study was to evaluate the efficiency of a gas-phase fluorination method under different fluorination periods through using two resin cements. MATERIALS AND METHODS: 84 zirconia specimens in dimensions of 5 mm × 5 mm × 2 mm were prepared and surface treated with 50 µm aluminum oxide particles or gas phase fluorination for 2 min, 5 min, or 10 min. One specimen in each group was surface analyzed under scanning electron microscope. The remaining specimens were bonded to composite cylinders in dimensions of 2 mm diameter and 3 mm high with Panavia SA Plus or Variolink N. Then, the specimens were stored in 37℃ distilled water for 24 hours and shear bond strength test was applied at a speed of 1 mm/min. RESULTS: The highest shear bond strength values were observed in the samples fluorinated for 5 minutes and cemented with Panavia SA Plus. Variolink N did not elicit any statistical differences between surface treatments. Panavia SA Plus resin cement and Variolink N resin cements featured statistically significant difference in shear bond strength values only in the case of 5 minutes of fluorination treatment. CONCLUSION: According to the results of this study, application of 5 minutes of fluorination with 10-methacryloyloxydecyl dihydrogen phosphate monomer (MDP) containing Panavia SA Plus resin cement increased the resin bond strength of zirconia. Fluorination of the zirconia surface using conventional resin cement, Variolink N, did not lead to an increase in bond strength.

Antimicrobial effects of Quercus infectoria gall extract on the cell morphology of Streptococcus agalactiae, Proteus vulgaris and Candida albicans

Aims: Quercus infectoria (QI) gall extract is known to have broad spectrum anti-microbial activity in vitro. However, its mechanism of microbial growth inhibition is not well understood. The objectives of this study were to determine the antimicrobial effect of methanolic QI gall extract on bacteria and yeast and changes to their cell morphology. Methodology and results: The minimum inhibitory concentrations (MICs) of methanolic QI gall extract against Streptococcus agalactiae (ATCC 13813), Proteus vulgaris (ATCC 49312) and Candida albicans (ATCC 10231) were determined using two fold serial microdilution technique at concentrations ranging from 0.01 mg/mL to 5.00 mg/mL (for bacteria) and 0.02 mg/mL to 12.00 mg/mL (for yeast). Minimum bactericidal concentration (MBC) and minimum fungicidal concentration (MFC) were determined by subculturing the broth from the microtitre wells which showed no apparent growth or turbidity onto the nutrient agar plates. The scanning electron microscope (SEM) was used to analyze the morphology of bacteria and yeast cells treated with 1× MIC and 4× MIC of the extract. Substantial antimicrobial activity was observed against ATCC strains of S. agalactiae, P. vulgaris and C. albicans in this study. The MBC/MFC to MIC ratio (≤4) indicated the methanolic QI gall extract was bactericidal and fungicidal against all the tested strains. Changes to the cell morphology were more obvious at higher extract concentration (4× MIC). Conclusion, significance and impact of study: This study showed that QI gall extract has antimicrobial effects on the bacterial and yeast cell morphology and thus, provides scientific information suggesting its possible antimicrobial mechanisms on the cell wall and membrane integrity.

Comparision of the shaping and cleaning ability of Reciproc,OneShape and ProTaper rotary instrument in oval-shaped canal of extracted teeth / 实用口腔医学杂志

Objective:To investigate the shaping and cleaning ability of Reciproc(RE),OneShape(OS)and ProTaper(PT)in oval-shaped root canal preparation.Methods:The canals of 57 distal roots of mandibular first molars were randomly divided into 3 groups and prepared by RE,OS and PT respectively.The preparation time was recorded.After instrumentation,all root canal walls were examined under SEMand evaluated by scores of debris and smear layer.The 3D data and images of the roots of pre-and post-preparation were con-structed by Micro-CT scanning.Results:Group RE and OS showed lower scores of debris and smear layer than those in group PT at the apical level(P <0.05),and less preparation time (P <0.05).Before and after preparation,the changes of root canal morphological pa-rameters (including volume,surface,area,major diameter and minor diameter)in OS group were less than those in group RE and PT(P<0.05).The changes of canal curvature in group PT was larger than that in group RE and OS (P <0.05).Conclusion:RE and OS are more effective than PT in debridement and faster in root canal preparation.RE and OS can maintain the centering of original canal better than PT in the apical part of the root canal.The shaping ability of OS is weaker than that of RE and PT.

Morphological comparison of the filiform papillae of New Zealand white rabbits (Oryctolagus cuniculus) as domestic mammals and Egyptian fruit bat (Rousettus aegyptiacus) as wild mammals using scanning electron microscopic specimens / Comparación morfológica de las papilas filiformes de conejos blancos Nueva Zelanda (Oryctolagus cuniculus) como los mamíferos domésticos y los murciélagos de la fruta egipcios (Rousettus aegyptiacus) como los mamíferos salvajes utilizando muestras de microscopía electrónica de barrido

This paper presents a comparison of the morphological structure of the filiform papillae in New Zealand white rabbits as domestic mammals and Egyptian fruit bats as wild mammals. This study was carried out on the tongues of adult healthy New Zealand white rabbits and Egyptian fruit bats of both sexes. There were four types of lingual papillae in both animals. In the Egyptian fruit bats, there were six subtypes of the filiform papillae; three on the anterior part (small, conical and giant), two on the middle part (cornflower and leaf-like papillae) while the posterior part contain rosette shape filiform papillae, in addition to transitional papillae and conical papillae. In New Zealand white rabbits, there were four subtypes of filiform papillae; spoonful conical (on the lingual anterior part), processed (at the anterior edge of lingual prominence), leaf-like (on the posterior area of lingual prominence) and triangular filiform papillae (on the lingual root). The shape, size, number and orientation of the lingual papillae itself and its processes varied according to their location within the tongue (region-specific) in relation to the feeding habits, strategies for obtaining food, climate conditions, and types of food particles.

Se comparó la estructura morfológica de las papilas filiformes de un mamífero doméstico (conejo neozelandes) y de un mamífero silvestre (murciélagos de la fruta egipcio). El estudio fue realizado en animales de ambos sexos. Se observó cuatro tipos de papilas linguales, en ambas especies de animales. En los murciélagos de la fruta egipcio se observaron seis subtipos de papilas filiformes; tres en la parte anterior (pequeño, cónico y gigante), dos en la parte media (aciano y hojas como papilas) mientras que en la parte posterior se observaron papilas filiformes y papilas de transición cónica. En los conejos se observaron cuatro subtipos de papilas filiformes; cónica cucharada (en la parte anterior lingual), procesado (en el margen anterior de la prominencia lingual), tipo hoja (en la zona posterior de la prominencia lingual) y papilas filiformes triangulares (en la raíz lingual). La forma, tamaño, número y orientación de las papilas linguales y sus procesos varían de acuerdo a la función y a la ubicación en la lengua (específicos de la región) en relación con los hábitos de alimentación, las estrategias para la obtención de alimentos, las condiciones climáticas y tipos de partículas de alimentos.

Fungus inducing the formation of agilawood from Aquilaria sinensis / 中国药学杂志

OBJECTIVE: To screen the fungi which can induce Aquilaria sinensis to produce active substance. METHODS: Fungus was inoculated in the stem of A. sinensis under natural conditions. The penetration and planting of fungus in stem of A. sinensis as well as the interaction of the two organisms were studied by microscope and scanning electron microscopy, and the main ingredients of the volatile oil in induced agilawood were analysed by GC-MS. RESULTS: Three active strains inducing the formation of agilawood were obtained, which was reported for the first time in the world. The main ingredients of the volatile oil were similar between the induced agilawood and the natural materials. CONCLUSION: It is very important for us to use the fungus in the induction of agilawood and in the sustainable utilization of this special medicinal material. Copyright 2012 by the Chinese Pharmaceutical Association.

Effect of psychological stress on disk of temporomandibular joint and lateral pterygoid muscle microstructure in rats / 中华行为医学与脑科学杂志

Objective To observe the influence of psychological stress and countermeasure implementation upon the temporomandibular joint ( TMJ ) articular disc and external pterygoid muscle in rats,providing experimental and theoretical evidence for clinical treatment of psychological stress-induced temporomandibular disorders (TMD).Methods The animal models treated by psychological stress induced by alternating current box were established.Before and after subjected to psychological stress,rats were given anxiolytic drugs to eliminate stressors.For all the rats in control group,psychological stress group ( PS group),and psychological stress plus anxiolytic drug injection group ( ( PS + DI) group),the microstructure of TMJ articular disc and external pterygoid muscle the changes in RNA expression of interleukin-1 ( 1L-1 ) were investigated by using transmission electron microscope (TEM),scanning electron microscope ( SEM ) and RT-PCR methods,respectively.Statistical analysis was performed upon the obtained test results.Results The TEM showed pathlogical changes in rats'pterygoid muscles of PS group at 1,3 and 5 weeks,including edema,reduction of substrate density and microchondrial cristae.Instead,these structures were all showed normal in the group of PS + DI and recovering group after removal of stressor.For the rats in PS group,SEM observation revealed that partial synovium of articular disc began to disintegrate 1 week after psychological stress.Strip-like wear degenerations were shown in the surface collagenous fiber in articular disc 3 weeks later,and the surface collagenous fibers in articular disc were arrayed in disorder 5 weeks following stress treatment.No significant microstructural changes in articular disc were observed in all stressor-eliminating groups and ( PS + DI) group 1,3,and 5 weeks following stress treatment.Statistical significance was noted in RNA expression level of IL-1 between PS group and PS + DI group (P＜0.05).In addition,there was significant difference in IL-1 expression between PS group and all stressor-eliminating groups.Conclusion The implementation of countermeasures effectively counteracted the influence upon TMJ induced by psychological stress,and provided possible resolutions for the clinical treatment of TMD induced by psychological stress.

Scanning Electron Microscopic Study of the Effects of Citric Acid on the Change of Implant Surface According to Application Time / 대한치주과학회지

The present study was performed to evaluate the effect of citric acid on the change of implant surface microstructure according to application time. Implants with pure titanium machined surface, titanium plasmasprayed surface, and sand-blasted, large grit, acid etched surface were utilized. Implant surface was rubbed with pH 1 citric acid for 1/2 min., 1 min., 1 1/2 min., 2 min., and 3min. respectively in the test group and implant surface was not treated in the control group. Then, the specimens were processed for scanning electron microscopic observation. The following results were obtained. 1. Both test and control group showed a few shallow grooves and ridges in pure titanium machined surface implants. There were not significant differences between two groups. 2. In titanium plasma-sprayed surfaces, round or amorphous particles were deposited irregularly. The irregularity of titanium plasma-sprayed surfaces conditioned with pH 1 citric acid was lessened and the cracks were increased relative to the application time of pH 1 citric acid. 3. Sand-blasted, large grit, acid etched surfaces showed the macro/micro double roughness. The application of pH 1 citric acid didn't change the characteristics of the sand-blasted, large grit, acid etched surfaces. In conclusion, the application of pH 1 citric acid to titanium plasma-sprayed surface is improper. And pure titanium machined surface implants and sand-blasted, large grit, acid etched surface implants can be treated with pH 1 citric acid for peri-implantitis treatment if the detoxification of these surfaces could be evaluated.

Comparative study of Aretemisia princeps Pamp. grown in Japan and China / 全日本鍼灸学会雑誌

Microstructure and elemental composition of dried <I>Artemisa princeps</I> Pamp. (Yomogi) leaves produced in Japan and China were investigated by scanning electron microscopy and X-ray microanalysis. Trichomes and T-foem hairs were found in higher density on the reverse side of the leaf of Yomogi. Cilium hairs were observed in Japanese Yomogi, while those in Chinese Yomogi, were distributed. Concentrations of K, Ca, Si and Cl were determined in plant fibers of the trichome in both Yomogi. In the head-style hairs of Japanese Yomogi, K, Ca, and Cl, S, P, Si were found, while K, Ca, Si, S, Mg and Fe were observed in the Chinese Yomogi.<BR>These results suggest that there were differences in morphological and elemental composition between Japanese and Chinese dried Yomogi leaves. These differences will affect the moxa quality even after the purifying process.

SEM observation on stem and leaf epidermis of three species in Rabolosia (Bl.) Hassk / 中草药

Object To study the micro morphological characteristics of the leaf and stem epidermis of three species in Rabdosia (Bl ) Hassk Methods The leaf and stem epidermis of Rabdosia amethystoides (Benth ) Hara, R macrocalyx (Dann) Hara and R nervosa (Hemsl ) C Y Wu et H W Li were observed by scanning electron microscope (SEM) Results Some characteristics are same among three species, such as elliptical stoma and glandular scale which has four cells, but some characteristics are di fferent, such as the shape of epidermal cell, the distribution of nonglandular hair, the shape of stoma Conclusion The leaf and stem epidermal characteristics are obviously different among the three species, it provides the new reference to discriminate the plants of Rabdosia (Bl ) Hassk

Impact of Blastocystis hominis Infection on Ultrastructure of Intestinal Mucosa in Mice / 中国寄生虫学与寄生虫病杂志

Objective To observe the ultrastructural change of intestinal mucosa in mice infected with Blastocystis hominis, and to study the pathogenic mechanism of B.hominis infection. Methods 20 Kunming mice were randomly divided into 4 groups: group A treated with immunosuppressant (dexamethasone), group B without immunosuppressant, group C as normal control and group D as immunosuppressant control. Groups A and B were then orally infected with 204 cysts of B. hominis. Groups C and D were treated as control by infusing same volume of Locke′s solution. Six days after inoculation, mice in each group were killed and mucosa of ileocecum was observed by transmission electron microscope (TEM) and scanning electron microscope (SEM). Results Under SEM, B. hominis located in enteric cavity and on the surface of ileocecum mucosa. Individual parasites also invaded into mucosa and its fold. Partial destruction of microvilli on the mucosa was observed. TEM observation indicated a reduction of microvilli on the surface of absorptive cells. Mitochondrial edema, rough endoplasmic reticulum dilatation and degranulation were found on absorptive cells and goblet cells. Lymphocyte infiltration and eosinophilia were found in intercellular stroma. Pathological changes in group A were more serious than that of group B. No abnormal change on the mucosal ultrastructure was found in groups C and D. Conclusions B. hominis infection causes significant ultrastructural lesion on the ileocecal mucosa in mice. Immune status of the mice can affect the degree of the lesion due to infection.

OBSERVATION ON THE ARCHITECTURE OF SUBPLEURAL PULMONARY MICROVASCULATURE IN BACTRIAN CAMEL (CAMELUS BACTRIANUS) UNDER SEM / 解剖学报

Objective To study the architecture of the subpleural pulmonary microvasculature and its functional relationship in the bactrian camel. Methods The replica scanning electron microscopic method was used. Results According to their continuous branches,the subpleural pulmonary microvasculatures were recognized into four grades: arteriole,terminal arteriole,precapillary arteriole and capillary.The subpleural pulmonary capillaries generally came from the subpleural precapillary arteriole and communicated each other to form the subpleural pulmonary capillary network.Sometimes,the subpleural terminal arteriole directly gave rise to capillaries to unite with the subpleural pulmonary capillary network.The network was loose,in which the diameter of the mesh was larger than that of the capillary,and the mesh was often hexagon and pentagon in appearance.There were obvious imprints of the smooth muscles on the surface of the casts of the subpleural pulmonary arteriole,the terminal arteriole and the precapillary arteriole.On the surface of the casts of the subpleural pulmonary capillary,there were obvious imprints of the endothelial nuclei as well.In addition,the broad and different level communications were found among the pulmonary interstitial capillary and subpleural pulmonary microvasculature.Conclusion There were no significant differences on the architecture of the subpleural pulmonary microvasculature between the bactrian camel and other kind of mammals.