Adaptación marginal e interna de cofias fabricadas por métodos convencionales, CAD/CAM de fresado y sinterizado por láser / Marginal and internal adaptation of copings manufactured by conventional methods, CAD/CAM milling and laser sintering

Introducción: la adaptación marginal e interna de nuestras restauraciones fabricadas por fundición sistemas de fresado y sinterización láser es uno de los factores clínicos más importantes para el éxito de las prótesis fijas, previniendo el riesgo de microfiltración y enfermedad periodontal. Objetivo: evaluar la adaptación marginal e interna de cofias metálicas en aleación Cr-Co confeccionadas por técnicas convencionales, CAD/ CAM de fresado y sinterizado por láser. Material y métodos: estudio de tipo experimental, comparativo e in vitro. Se imprimió un modelo maestro en Cr-Co, proveniente del escaneo de un premolar preparado para corona completa, sobre el cual se diseñaron 30 cofias divididas en tres grupos: el primero que corresponde al grupo cofias fundidas fresadas en disco de cera A (A = 10), el segundo grupo cofias fresadas en disco de metal presinterizado B (B = 10) y el tercer grupo cofias impresas por sinterización láser C (C = 10). Se empleó la réplica de silicona, colocando silicona al interior de cada cofia, sobre el modelo maestro, simulando al cemento, mediante una máquina de ensayo universal se realizó una compresión de 50 N. Luego de retirar cada cofia se rellenaron con silicona pesada de adición, obteniendo una réplica de silicona. Se efectuaron dos cortes transversales en sentido vestíbulolingual y mesiodistal. Se observó el espesor de silicona VPS (vinil poliéter silicona) mediante un estereomicroscopio (Nikon SMZ745T), obteniendo valores en micrómetros. Para el análisis estadístico se utilizó el software SPSS 25 con el fin de realizar la prueba de normalidad y ANOVA de dos vías bajo un nivel de confianza del 95%. Resultados: el menor gap lo obtuvo el grupo de fresadas, seguido de las impresas y por último las fundidas por métodos convencionales. ANOVA de dos vías reveló diferencias estadísticamente significativas entre los tres grupos (p < 0.0001). Conclusiones: se encontró que el gap varía con cada método de fabricación, la técnica convencional de fundido mostró un mayor gap, ninguna excediendo el rango clínicamente aceptable (AU)

Introduction: the marginal and internal adaptation of our restorations manufactured by casting, milling systems and laser sintering is one of the most important clinical factors for the success of fixed prostheses, preventing the risk of microleakage and periodontal disease. Objective: evaluate the marginal and internal adaptation of metal copings in Cr-Co alloy made by conventional techniques, CAD/CAM milling and laser sintering. Material and methods: an experimental, comparative and in vitro study, a Cr-Co master model was printed from the scan of a premolar prepared for a full crown. An experimental, comparative and in vitro study, a Cr-Co master model was printed from the scan of a premolar prepared for a full crown, on which 30 caps divided into three groups were designed; the first group corresponds to the cast copings milled on a wax disc A (A = 10), the second group milled copings on a presintered metal disc B (B = 10) and the third group printed by laser sintering copings C (C = 10). The silicone replica was used, placing silicone inside each coping, on the master model, simulating cement, using a universal testing machine, a 50 N compression was performed. After removing each coping, they were filled with heavy addition silicone, obtaining a silicone replica. Two cross-sections were made in the buccolingual and mesiodistal direction., observing the thickness of the VPS (vinyl polyeter silicone) silicone using a stereomicroscope (Nikon SMZ745T), obtaining values in micrometers. For the statistical analysis, the SPSS 25 software was used in order to perform the normality and two-way ANOVA tests under a 95% confidence level. Results: the smallest gap was obtained by the milled group, followed by the printed ones and finally those cast by conventional methods. Two-way ANOVA revealed statistically significant differences between the three groups (p < 0.0001). Conclusions: the gap was found to vary with each fabrication method, the conventional casting technique showed a larger gap, none exceeding the clinically acceptable range (AU)

Adaptación de cofias Co-Cr fabricadas por colado por inducción y fusión selectiva láser en CAD/CAM con escaneo clínico / Adaptation of Co-Cr copings made by induction casting and selective laser melting in CAD/CAM with clinical scanning

RESUMEN La técnica de cera perdida colada por centrifugación por inducción (CPCI) y fusión selectiva láser (SLM) en diseño y fabricación asistida por computador (CAD/CAM) con escaneo clínico, son técnicas para fabricar cofias de Cobalto-Cromo (Co-Cr), poseen diferentes procesos de elaboración. Objetivo: Evaluar in vitro la adaptación marginal e interna de cofias metálicas de Co-Cr confeccionadas sobre una línea de terminación chámfer con la técnica CPCI y SLM en CAD/CAM con escaneo clínico. Material y Métodos: Se confeccionó un modelo maestro de forma de premolar de Co-Cr en CAD/CAM con línea de terminación chamfer. Con un escáner clínico se escaneó el modelo maestro y se obtuvo 13 cofias Co-Cr fabricadas en SLM. Se tomaron impresiones para obtener modelos en yeso tipo IV donde se fabricaron 13 cofias de Co-Cr con técnica CPCI. La adaptación marginal e interna se evaluó usando la técnica de réplica de silicona, las muestras fueron divididas en segmentos: vestíbulo-palatino y mesio-distal y fueron evaluadas mediante estéreomicroscopio. Resultados: La discrepancia marginal e interna fueron menores para el grupo de CPCI en comparación a la técnica SLM en CAD/CAM con escaneo clínico. Además los resultados obtenidos para la adaptación marginal fueron menores a 120 μm y la adaptación interna menor a 350 μm para ambas técnicas. Conclusiones: La adaptación marginal e interna en la técnica CPCI en comparación con SLM en CAD/CAM con escaneo clínico fueron mejores con diferencia estadísticamente significativa (p<0.05). Además los resultados obtenidos se encontraban dentro de los parámetros clínicamente aceptables.

SUMMARY The technique of lost wax cast by induction centrifugation (CPCI) and selective laser fusion (SLM) in design and computer-aided manufacturing (CAD / CAM) with clinical scanning, are techniques for manufacturing cobalt-chromium copings (Co-Cr), have different production processes. Objective: To evaluate, in vitro, the marginal and internal adaptation of Co-Cr metal copings made on a chamfer termination line with the CPCI and SLM technique in CAD / CAM with clinical scanning. Material and Methods: A master model of Co-Cr premolar shape was made in CAD / CAM with chamfer termination line. With a clinical scanner, the master model was scanned and 13 Co-Cr copings manufactured in SLM were obtained. Impressions were taken to obtain models in type IV plaster where 13 Co-Cr copings with CPCI technique were manufactured. The marginal and internal adaptation was evaluated using the silicone replica technique, the samples were divided into segments: vestibulo-palatal and mesio-distal and were evaluated by stereo microscope. Results: The marginal and internal discrepancies were lower for the CPCI group compared to the SLM technique in CAD / CAM with clinical scanning. In addition, the results obtained for the marginal adaptation were less than 120 μm and the internal adaptation less than 350 μm for both techniques. Conclusions: The marginal and internal adaptation in the CPCI technique compared to SLM in CAD/CAM with clinical scan were better with statistically significant difference (p <0.05). In addition, the results obtained were within the clinically acceptable paramenters.

A Prospective, Long-Term Follow-Up Study of 1,444 nm Nd:YAG Laser: A New Modality for Treating Axillary Bromhidrosis

BACKGROUND: Surgery for bromhidrosis has a high risk of complications such as hematoma and necrosis. New nonsurgical methods may reduce the burden on surgery and the risks for the patient. OBJECTIVE: This study was performed to evaluate the efficacy and side-effects of the 1,444 nm Nd:YAG interstitial laser for treating axillary bromhidrosis. METHODS: Eighteen bromhidrosis patients were treated with a 1,444 nm Nd:YAG laser at Korea University Ansan Hospital. The post-treatment follow-up was 6 months. After the procedure, we confirmed apocrine gland destruction through histopathological examination. At each follow-up, we measured the severity of the remaining odor, postoperative pain, degree of mobility restriction, and overall satisfaction. RESULTS: After 180 days of follow-up, malodor elimination was good in 20 axillae, fair in 12 axillae, and poor in four axillae. At the end point of the study, 14 patients were totally satisfied with the laser treatment, three patients were partially satisfied, and one patient was disatisfied. Pain and limitation of mobility were significantly reduced within 1 week post-operatively, and were almost resolved within 4 weeks post-operatively. A histopathological examination revealed decreased density and significant alterations to the apocrine glands. CONCLUSION: Subdermal coagulation treatment with a 1,444 nm Nd:YAG interstitial laser may be a less invasive and effective therapy for axillary bromhidrosis.

Basic Principles of Laser for Prostate Surgery / 대한남성과학회지

Recent advances in laser technology have provided a varied arsenal for endoscopic treatment of benign prostatic hyperplasia. Laser is a collimated coherent radiation of photons generated by stimulated emission of gain media, allowing transfer of selective, controlled and focused energy to the targeted tissue. The application of laser to prostate surgery developed hand-in-hand with refinements to the equipment. Earlier lasers were low powered modalities with no significant tissue selectivity, aimed at thermal coagulation and resulted in significant side effects and recurrence. Since then, prostate lasers have developed towards a more high-powered and selective modality that allowed complete ablation of the tissue with fewer complications. Fiber technology has also developed to allow efficient and safe transfer of a continuously increasing energy output. It is important for the surgeon to understand these fundamental principles of laser and prostate surgery, not only to select the proper tools, but also to properly implement the technique as well.

Current Laser Treatments for Benign Prostatic Hyperplasia

The latest technical improvements in the surgical armamentarium are remarkable. In particular, advancements in the urologic field are so exceptional that we could observe the flare-up of robot-assisted laparoscopic radical prostatectomy for prostate cancer and laser prostatectomy for benign prostatic hyperplasia (BPH). Photoselective vaporization of the prostate (PVP) and holmium laser prostatectomy are the most generalized options for laser surgery of BPH, and both modalities have shown good postoperative results. In comparison to transurethral prostatectomy (TURP), they showed similar efficacy and a much lower complication rate in randomized prospective clinical trials. Even in cases of large prostates, laser prostatectomy showed comparable efficacy and safety profiles compared to open prostatectomy. From a technical point of view, PVP is considered to be an easier technique for the urologist to master. Furthermore, patients can be safely followed up in an outpatient clinic. Holmium laser enucleation of the prostate (HoLEP) mimics open prostatectomy because the adenomatous tissue is peeled off the surgical capsule in both procedures. Therefore, HoLEP shows notable volume reduction of the prostate similar to open prostatectomy with fewer blood transfusions, shorter hospital stay, and cost reduction regardless of prostate size. Outcomes of laser prostatectomy for BPH are encouraging but sometimes are unbalanced because safety and feasibility studies were reported mainly for PVP, whereas long-term data are mostly available for HoLEP. We need longer-term randomized clinical data to identify the reoperation rate of PVP and to determine which procedure is the ideal alternative to TURP and open prostatectomy for each patient.