Preparation and in vitro dissolution behaviors evaluation of silymarin phospholipid complex / 药学实践杂志

Objective To prepare silymarin phospholipids complex（SM-PC） and investigate its physicochemical properties. Methods On the basis of single-factor tests, the drug-lipid ratio, drug concentration and reaction temperature were selected as the factors of the central composite design and response surface methodology in the preparation of SM-PC by solvent volatilization, and the best process was optimized with the compound rate as the index. And its in vitro dissolution was measured. Results The optimum preparation technology of SM-PC was as follows: acetone was used as compound solvent, the concentration of SM was 8.0 mg/ml, the mass ratio of SM to phospholipid was 1∶1.8, the reaction temperature was 56 ℃ and the recombination rate was（95.15±1.55）% with deviation of less than 3%. The in vitro dissolution test showed that the dissolution of SM-PC was close to 90% in 60 min. The dissolution behavior of main component of silybin was similar to that of silymarin capsules（Legalon ®）, which was higher than SM-API. Conclusion SM-PC was successfully prepared by central composite design response surface method, which significantly improved the dissolution and laid a foundation for the study of subsequent preparations.

Enhanced antitumor effect of curcumin loaded solid lipid nanoparticles in Dalton’s ascites lymphoma mice

Curcumin is widely known for its antibacterial, antioxidant and anti inflammatory effects and has been reported to possess anticancerous activity as well. However, its medical application is limited because of poor bioavailability and rapid metabolism. In this study, we encapsulated curcumin in solid lipid nanoparticles and studied its anticancerous effect in Dalton’s Ascites Lymphoma (DAL) mice model. The physicochemical characteristics of curcumin solid lipid nanoparticles (CUR-SLN) were assessed and the anticancer efficacy was determined by in vivo studies. The curcumin solid lipid nanoparticles were synthesized by solvent emulsification evaporation method with particle size less than 100 nm. Antitumor effect of nanocurcumin (50 mg/kg) and curcumin (100 mg/kg) was evaluated in Dalton’s Ascites Lymphoma bearing mice. Pathological and immunohistochemical parameters were studied. Mean survival time and percentage increase in lifespan were assessed. Nanocurcumin group showed more significant influence in reducing tumor volume and weight, inducing apoptosis, reducing angiogenesis and invasion restoring antioxidant parameters and increased mean survival time. Curcumin and nanocurcumin inhibited the activation of nuclear factor-kappa B (Nf-kB), and thereby proved the pathway by which it induced anti-angiogenic and anti-invasive property.

Preparation, physicochemical characterization and cytocompatibility study of self-assembled silk fibroin nanoparticles / 药学学报

This study aimed to prepare silk fibroin nanoparticles (SF-NPs) and assess the physicochemical properties and biocompatibility of the formulation. An optimized and simplified solvent displacement method was employed to obtain SF-NPs. Single-factor prescription screening, such as silk fibroin (SF) solution concentration, the ratio of SF solution to organic solvent, ultrasonication power and time, and different types of organic phases, was used to optimize the formulation. The characterization of the optimal formulation included particle size, polydispersity index (PDI), zeta potential, morphology, and stability. The in vitro cell compatibility of the nanoparticles was evaluated using CCK-8 and Calcein-AM/PI cell viability staining. The results showed that when SF concentration was 20 mg·mL-1, volume ratio of aqueous phase to acetone was 1∶6, ultrasonic power was 80 W and ultrasonic time was 3 min, the best SF-NPs was obtained. The nanoparticles prepared in this study exhibit a near-spherical shape, with a uniform size distribution, having an average size of 144.8 nm, a PDI of 0.174, and a zeta potential of -27.35 mV. Results from in vitro cell experiments demonstrate excellent cell compatibility of SF-NPs, showing the ability to promote cell proliferation. The SF-NPs which were successfully prepared in this study exhibit uniform particle size and excellent biocompatibility.

Determination of iodine in workplace air by inductively coupled plasma mass spectrometry / 中国职业医学

Objective To establish a solvent desorption inductively coupled plasma-mass spectrometry (ICP-MS) method for determination of iodine in workplace air. Methods Iodine in workplace air was collected with alkaline activated carbon tube and desorbed with 10.0 mL pure water or 20 mmol/L sodium bicarbonate solution. Rhenium-185 was used as an internal standard for quantification. The sample was determined in standard mode and kinetic energy discrimination collision (KED) mode by ICP-MS. Results In standard mode, iodine showed a good linear range in the concentration of 9.0 to 1 100.0 μg/L, with a correlation coefficient of 0.999 3 and a detection limit of 2.7 μg/L. In KED mode, iodine showed a good linear range in the concentration of 24.3 to 800.0 μg/L, with a correlation coefficient of 0.999 1 and a detection limit of 7.3 μg/L. The average desorption efficiency using pure water ranged from 99.1% to 106.7%, with within-run relative standard deviation (RSD) of 3.1% to 8.0% and between-run RSD of 4.9% to 9.3%. The average desorption efficiency using sodium bicarbonate solution ranged from 96.5% to 105.3%, with within-run RSD of 4.9% to 8.6% and between-run RSD of 2.5% to 9.9%. There were no statistical significant differences in the main effects of desorption solution, ICP-MS detection mode, their interaction on average desorption efficiency and within-run RSD (all P>0.05). Samples could be stored at room temperature for at least 7 days. Conclusion This method is highly sensitive, accurate, and suitable for the determination of iodine in workplace air. The sample pretreatment is simple and rapid.

Application of high-speed counter current chromatography in extraction and separation of alkaloids in natural products / 中国中药杂志

Alkaloids, widespread in plants, have a series of pharmacological activities and have been widely used to treat various diseases. Because alkaloids are usually presented in multicomponent mixtures and are deeply low in content, they are very difficult to extract and separate by traditional methods. High-speed counter current chromatography(HSCCC) is a kind of liquid-liquid chromatography without solid support phase, which has the advantages of large injection volume, low cost, and no irreversible adsorption. Compared with the traditional methods of extraction and separation of alkaloids, HSCCC can ensure the separation of many different alkaloids at one time, with a high recovery and large amount. In this paper, the advantages and disadvantages of HSCCC compared with traditional separation methods were discussed and the solvent system and elution mode of HSCCC used to separate alkaloids in recent years were summarized by referring to the relevant literature to provide some references for the separation of alkaloids by HSCCC.

Effect of Paint Exposure Among Paint Workers and DNA Damage: A Scoping Review

@#Paint contains various complex chemical mixtures, such as aliphatic hydrocarbons, aromatic hydrocarbons (primarily toluene), ketones, and benzene as reported at previous studies. Toxicity from some chemicals can cause early DNA damage with various factors. A scoping review was conducted via literature review on relevant studies on the effect of paint exposure on paint workers and DNA damage. A systematic search was conducted in October 2021 via PubMed, Scopus, and Web of Science databases. The key terms used were paint, solvent-based paint, organic solvent, mixed organic solvent, occupational exposure and DNA damage, oxidative stress, genotoxicity on a painter, paint worker. From 561 articles, only 13 articles were finally selected based on the inclusion, exclusion criteria, and eligibility criteria. The literature showed that biomonitoring studies on painters were consistently reporting positive and significant DNA damage due to exposure to different types of compounds mixed in a paint. However, there were fewer studies on paint manufacturing factory workers compared to painters while paint manufacturing workers exposed various chemical everyday during the paint production which potentially susceptible to occupational toxicity. In conclusion, this review suggests that exposure to paints could induce early DNA damage among paint workers and further investigations on paint exposure among paint manufacturing factory workers and the DNA damage were needed in order to improve occupational health among paint workers in the future.

Determination of two isomers of tetrachloroethane by solvent desorption-gas chromatography in workplace air / 中国职业医学

Objective: To establish a solvent desorption-gas chromatography method for the determination of 1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane in workplace air. Methods: The 1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane in workplace air were collected using activated carbon tubes, desorbed with carbon disulfide, and separated and detected by gas chromatography. The quantifications were based on standard curves. Results: The linear ranges of 1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane were 0.98-395.50 and 0.87-395.50 mg/L, respectively, with the correlation coefficient of 0.999 95. The detection limits were 0.29 and 0.26 mg/L, respectively. The average of desorption efficiency was 92.04%-104.67%. The within- and between-run relative standard deviations were 1.42%-2.09% and 1.63%-6.09%, respectively. The sampling efficiency was more than 98.00%. The samples could be stored at room temperature for at least 14 days. Conclusion: This method can be used in detection of 1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane in workplace air.

Determination of dimethyl carbonate in workplace air by solvent desorption-gas chromatography / 中国职业医学

Objective: To establish a solvent desorption-gas chromatography method for determination of dimethyl carbonate (DMC) in workplace air. Methods: The air samples were collected using activated carbon tubes, desorbed by carbon disulfide, separated by dimethylpolysiloxane capillary columns, and detected by a flame ionization detector. Results: The linear range of DMC was 2.14 to 1.07×104 mg/L, and the correlation coefficient was greater than 0.999. The detection limit was 0.14 mg/L, the lower limit of quantification was 0.47 mg/L, the minimum detection concentration was 0.10 mg/m3, and the minimum quantification concentration was 0.32 mg/m3 (based on 1.5 L workplace air). The average desorption efficiency of the method was 96.2% to 102.0%. Both the within-run and between-run relative standard deviations were 0.9% to 2.3%. The samples could be stored for at least seven days at four celsius degree. Conclusion: This method shows high desorption efficiency, high sensitivity, good precision and is simple in using. It can be used for the determination of DMC in workplace air.

Solid-phase microextraction of endogenous metabolites from intact tissue validated using a Biocrates standard reference method kit / 药物分析学报

Improved analytical methods for the metabolomic profiling of tissue samples are constantly needed.Currently,conventional sample preparation methods often involve tissue biopsy and/or homogenization,which disrupts the endogenous metabolome.In this study,solid-phase microextraction(SPME)fibers were used to monitor changes in endogenous compounds in homogenized and intact ovine lung tissue.Following SPME,a Biocrates AbsoluteIDQ assay was applied to make a downstream targeted metab-olomics analysis and confirm the advantages of in vivo SPME metabolomics.The AbsoluteIDQ kit enabled the targeted analysis of over 100 metabolites via solid-liquid extraction and SPME.Statistical analysis revealed significant differences between conventional liquid extractions from homogenized tissue and SPME results for both homogenized and intact tissue samples.In addition,principal component analysis revealed separated clustering among all the three sample groups,indicating changes in the metabolome due to tissue homogenization and the chosen sample preparation method.Furthermore,clear differences in free metabolites were observed when extractions were performed on the intact and homogenized tissue using identical SPME procedures.Specifically,a direct comparison showed that 47 statistically distinct metabolites were detected between the homogenized and intact lung tissue samples(P＜0.05)using mixed-mode SPME fibers.These changes were probably due to the disruptive homogenization of the tissue.This study's findings highlight both the importance of sample preparation in tissue-based metabolomics studies and SPME's unique ability to perform minimally invasive extractions without tissue biopsy or homogenization while providing broad metabolite coverage.

Comparison and improvement of palatability for multisourced oral azithromycin suspension / 药学学报

Azithromycin dry suspension is one of the most commonly used drugs in pediatric clinic, but its taste masking has been difficult to achieve. 5 representative products of azithromycin dry suspension were chose to compare their tastes both using electronic tongue and human sensory evaluation methods, and there existed the differences of bitterness, later bitterness, graininess, and adhesion among these products. Raman micro-imaging was used to determine the difference in taste mainly due to different prescription ingredients and manufacturing techniques. Through mixing the dry suspensions with alkaline mixing solvent, the bad taste of each product was masked after evenly dispersing in the solvent, and their tastes were all close to the taste of the solvent. In the future, it is planned to investigate the stability and bioavailability of the solvent preparations, and then to give the medication suggestion of solvent preparation after ensuring their efficacy.

Stability and taste evaluation of two kinds of oral solvent after extemporaneous compounding / 药学学报

A flavoring agent and a suspension agent were prepared for extemporaneous compounding. The stability of the two agents before and after drug loading was investigated, and the taste of the suspension after extemporaneous compounding was evaluated by electronic tongue technology. The two agents remained stable under the conditions of influence factor test, accelerated test and long-term test. The appearance properties of the two agents did not change. The relative density of the flavoring agent was maintained at 1.053-1.075, and the pH was stable at 4.2-4.5. The relative density of the suspension agent was maintained at 0.999-1.022, and the pH was stable at 4.0-4.5. Seven kinds of drugs, including warfarin sodium tablets and spironolactone tablets, were mixed with these two oral solvents, and the content uniformity and stability were detected respectively. The results showed that the preparations could be evenly dispersed and the physical and chemical properties were stable. The results of taste evaluation showed that in captopril group and chloral hydrate group, the flavoring agent had the best effect on taste correction. In warfarin sodium group, rifampicin group, spironolactone group, vitamin B1 group and vitamin B2 group, the blending agents had the best effect on taste correction.

Orally Disintegrating Film: A Review of Its Formulation and Manufacturing Method

@#Oral route drug delivery system is still considered as the most convenient and patient friendly drug delivery route. Over the decades, many research has been performed to improve the functionality oral dosage form. Orally disintegrating film (ODF) is a newer oral drug delivery system, which is in the form of a thin film that will disintegrate in the oral cavity within a matter of seconds. The aim of this review paper is to recap ODF, its benefits, formulation contents and manufacturing method. With more research and development work has been conducted on ODF, the dosage form is expected to be manufactured and scaled up to be commercializable products to be sold in the market.

Effect of Microemulsion on Content of Index Components in Different Phases of Zexietang Extract / 中国实验方剂学杂志

ObjectiveTo investigate the effect of microemulsion on the distribution of index components in different phases of Zexietang extract based on high performance liquid chromatography（HPLC） and phase separation process. MethodParticle size meter and transmission electron microscope were used to characterize the colloidal particles in blank microemulsion， aqueous extract of Zexietang and microemulsion extract of Zexietang. The phase separation process was established by high-speed centrifugation and dialysis， and based on this process， the aqueous extract and microemulsion extract of Zexietang were separated into the true solution phase， the colloidal phase and the precipitation phase， respectively. The contents of six components， including atractylenolide Ⅲ， atractylenolide Ⅱ， 23-acetyl alisol C， alisol A， alisol B and alisol B 23-acetate， were determined by HPLC with the mobile phase of water（A）-acetonitrile（B） for gradient elution（0-5 min， 40%-43%B； 5-20 min， 43%-45%B； 20-45 min. 45%-60%B； 45-75 min， 60%-80%B）. The solubility of the index components in water and microemulsion was determined by saturation solubility method. ResultThe colloidal particles in the aqueous extract， microemulsion extract and blank microemulsion were all spherical， and the particle size， polydispersity index（PDI） and Zeta potential of the colloidal particles were in the order of aqueous extract >microemulsion extract >blank microemulsion. The results of phase separation showed that the colloidal phase and the true solution phase could be completely separated by dialysis for 2.5 h， and the phase separation process was tested to be stable and feasible. Compared with the aqueous extract of Zexietang， the use of microemulsion as an extraction solvent could increase the contents of atractylenolide Ⅲ， 23-acetyl alisol C， atractylenolide Ⅱ ， alisol A， alisol B and alisol B 23-acetate by 3.75， 6.82， 35.47， 10.66， 35.41， 27.75-fold， and could increase the extraction efficiencies of the latter five constituents by 2.03， 1.15， 1.70， 6.43， 5.53 times. The solubility test showed that the microemulsion could significantly improve the solubility of atractylenolide Ⅱ， alisol A， alisol B and alisol B 23-acetate， but it had less effect on the solubility of atractylenolide Ⅲ and 23-acetyl alisol C. ConclusionMicroemulsion can improve the extraction efficiency and increase the distribution of the index components in the colloidal phase state of Zexietang to different degrees， providing a reference for the feasibility of microemulsion as an extraction solvent for traditional Chinese medicine.

Determination of methylmercury in urine by direct mercury analyzer / 中华劳动卫生职业病杂志

Objective: To develop asolvent extraction-direct mercury analyzer method for determination of methylmercury in urine. Methods: After the urinehydrolyzesd by hydrobromic acid, methylmercury was extracted by tolueneand reverse-extracted from L-cysteine solution, it was then detectedbydirect mercuryanalyzer. Results: The linear range was 0.2-50.0 μg/L, and the related coefficient was 0.9999. The relative standard deviations (RSD) within the group were 5.04%-6.64%, and the RSD between the group were 5.65%-8.11 %. The average recovery efficiencies were 85.4%-95.5%. The detection limitation was 0.0482 μg/L and the quantification concentrations was 0.1607 μg/L. Conclusion: The method, which has low detection limit, high sensitivity, easy to operate, is stability for the determination of methylmercury in urine.

Influence of solvent choice and operating conditions on Chlorzoxazone crystal shape and size

Abstract Solubility of pharmaceutical drugs in organic solvents is one of the important parameters to understand the equilibrium concentration of solute-solvent, which helps optimize and design crystallization conditions to obtain the desired product crystals. In the present study, Chlorzoxazone (CHZ) is used as a model pharmaceutical compound to investigate the equilibrium solubility, the influence of solvent and the operating conditions on the shape, and the size distribution. The solubility of CHZ is determined in organic solvents like Isopropanol, Ethanol, and 2-Ethoxyethylacetate, Ethylacetate and Ethyllactate using shake flask method from -5ºC to 60ºC. The solubility of CHZ in these solvents shows an increasing trend as the temperature increases in the following order: ethyllactate + water (0.5+0.5) < ethylacetate < isopropanol < ethanol < 2-ethoxyethylacetate < ethyllactate + water (0.75+0.25). The solvents, isopropanol, ethanol, and ethyl lactate, produce needle-shaped crystals, while 2-ethoxyethylacetate and ethyl acetate tend to produce plate shaped crystals. CHZ crystals obtained from 2-ethoxyethylacetate tend to have plate shaped crystals with a lower aspect ratio and are selected for batch cooling crystallization experiments performed at different cooling rates, and agitation. It is found that the agitation at 300 rpm and the cooling rate 0.2ºC/min produce more uniform crystal size distribution

PVP solid dispersions containing Poloxamer 407 or TPGS for the improvement of ursolic acid release

Abstract Solid dispersions (SDs) of ursolic acid (UA) were developed using polyvinylpyrrolidone K30 (PVP K30) in combination with non-ionic surfactants, such as D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) or poloxamer 407 (P407) with the aim of enhancing solubility and in vitro release of the UA. SDs were investigated using a 24 full factorial design, subsequently the selected formulations were characterized for water solubility, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), particle diameter, scanning electron microscopy, drug content, physical-chemical stability and in vitro release profile. SDs showed higher UA water-solubility than physical mixtures (PMs), which was attributed by transition of the drug from crystalline to amorphous or molecular state in the SDs, as indicated by XRD and DSC analyses. SD1 (with P407) and SD2 (with TPGS) were chosen for further investigation because they had higher drug load. SD1 proved to be more stable than SD2, revealing that P407 contributed to ensure the stability of the UA. Furthermore, SD1 and SD2 increased UA release by diffusion and swelling-controlled transport, following the Weibull model. Thus, solid dispersions obtained with PVP k-30 and P407 proved to be advantageous to enhance aqueous solubility and stability of UA.

Phenol compound content and antibacterial activity of gaharu leaf extract products (Aquilaria malaccensis)

Gaharu leaf extract produces yield extraction, phenol compound, and antibacterial activity in diverse quantities. The purpose of this research was to investigate the influence of the extraction method and type of solvent on the extractability of the polyphenol component and the antibacterial activity of gaharu leaves. Extraction was done through maceration and Soxhlet methods by using solvents of hexane, ethyl acetate, and ethanol. The extraction result showed that the highest yield value of 18.4% was found on the treatment of a combination of ethanol solvent and Soxhlet method. The total content of phenol and tannin of gaharu leaf extract was in the range of 11.2 to 18.62mg. mL-1 and 12.82 to 13.41%, respectively. Antibacterial activity of gaharu leaf extract on the Gram-positive test of Staphylococcus aureus was higher than that of the Gram-negative test of Escherichia coli having a value of zone of inhibition in the range of 5.33 to 6.33 mm and 4.00 to 5.00 mm, respectively.

Effects of Peganum harmala L Seed Extract on Culex pipiens (Diptera: Culicidae) / Efeitos do extrato de semente de Peganum harmala L em Culex pipiens (Diptera: Culicidae)

Mosquito-borne diseases result in the loss of life and economy, primarily in subtropical and tropical countries, and the emerging resistance to insecticides is increasing this threat. Botanical insecticides are promising substitutes for synthetic insecticides. This study evaluated the larvicidal and growth index of Culex pipiens of four solvent extracts of Terminalia chebula, Aloe perryi, and Peganum harmala against Cx. pipiens. None of the 12 extracts exhibited larvicidal potential against third instars except the ethyl acetate extract of P. harmala. After 24 h of exposure, the LC50 value was 314.88 ppm, and the LC90 value was 464.19 ppm. At 320 ppm, the hatchability was 25.83%, and it resulted in 100% mortality. In addition, the eggs treated with the EtOAc extract of P. Harmala exhibited a long larval period compared with the control. The larval period continued for 12 days, and the pupal period took three days in the treatment groups. The growth index data also exhibited a decrease (0.00–7.53) in the treated groups compare with 8.5 in the control. The transformation of eggs into adults decreased with increasing concentrations. This paper is the first report on the development and growth index of Cx. pipiens potential using P. harmala seeds.

As doenças transmitidas por mosquitos resultam na perda de vidas e economia, principalmente em países subtropicais e tropicais, e a resistência emergente aos inseticidas está aumentando essa ameaça. Os inseticidas botânicos são substitutos promissores dos inseticidas sintéticos. Este estudo avaliou o índice larvicida e de crescimento de Culex pipiens de quatro extratos solventes de Terminalia chebula, Aloe perryi e Peganum harmala contra Cx. pipiens. Nenhum dos 12 extratos exibiu potencial larvicida contra o terceiro ínstar, exceto o extrato de acetato de etila de P. harmala. Após 24 horas de exposição, o valor LC50 era 314,88 ppm e o valor LC90 era 464,19 ppm. A 320 ppm, a eclodibilidade foi de 25,83% e resultou em 100% de mortalidade. Além disso, os ovos tratados com o extrato de EtOAc de P. harmala exibiram um longo período larval em comparação com o controle. O período larval continuou por 12 dias, e o período pupal durou três dias nos grupos de tratamento. Os dados do índice de crescimento também exibiram uma diminuição (0,00-7,53) nos grupos tratados em comparação com 8,5 no controle. A transformação de ovos em adultos diminuiu com o aumento das concentrações. Este artigo é o primeiro relatório sobre o índice de desenvolvimento e crescimento de Cx. potencial de pipiens usando sementes de P. harmala.

Effects of Peganum harmala L. Seed Extract on Culex pipiens (Diptera: Culicidae)

Abstract Mosquito-borne diseases result in the loss of life and economy, primarily in subtropical and tropical countries, and the emerging resistance to insecticides is increasing this threat. Botanical insecticides are promising substitutes for synthetic insecticides. This study evaluated the larvicidal and growth index of Culex pipiens of four solvent extracts of Terminalia chebula, Aloe perryi, and Peganum harmala against Cx. pipiens. None of the 12 extracts exhibited larvicidal potential against third instars except the ethyl acetate extract of P. harmala. After 24 h of exposure, the LC50 value was 314.88 ppm, and the LC90 value was 464.19 ppm. At 320 ppm, the hatchability was 25.83%, and it resulted in 100% mortality. In addition, the eggs treated with the EtOAc extract of P. Harmala exhibited a long larval period compared with the control. The larval period continued for 12 days, and the pupal period took three days in the treatment groups. The growth index data also exhibited a decrease (0.007.53) in the treated groups compare with 8.5 in the control. The transformation of eggs into adults decreased with increasing concentrations. This paper is the first report on the development and growth index of Cx. pipiens potential using P. harmala seeds.

Resumo As doenças transmitidas por mosquitos resultam na perda de vidas e economia, principalmente em países subtropicais e tropicais, e a resistência emergente aos inseticidas está aumentando essa ameaça. Os inseticidas botânicos são substitutos promissores dos inseticidas sintéticos. Este estudo avaliou o índice larvicida e de crescimento de Culex pipiens de quatro extratos solventes de Terminalia chebula, Aloe perryi e Peganum harmala contra Cx. pipiens. Nenhum dos 12 extratos exibiu potencial larvicida contra o terceiro ínstar, exceto o extrato de acetato de etila de P. harmala. Após 24 horas de exposição, o valor LC50 era 314,88 ppm e o valor LC90 era 464,19 ppm. A 320 ppm, a eclodibilidade foi de 25,83% e resultou em 100% de mortalidade. Além disso, os ovos tratados com o extrato de EtOAc de P. harmala exibiram um longo período larval em comparação com o controle. O período larval continuou por 12 dias, e o período pupal durou três dias nos grupos de tratamento. Os dados do índice de crescimento também exibiram uma diminuição (0,00-7,53) nos grupos tratados em comparação com 8,5 no controle. A transformação de ovos em adultos diminuiu com o aumento das concentrações. Este artigo é o primeiro relatório sobre o índice de desenvolvimento e crescimento de Cx. potencial de pipiens usando sementes de P. harmala.

Effects of Peganum harmala L. Seed Extract on Culex pipiens (Diptera: Culicidae) / Efeitos do extrato de semente de Peganum harmala L. em Culex pipiens (Diptera: Culicidae)

Mosquito-borne diseases result in the loss of life and economy, primarily in subtropical and tropical countries, and the emerging resistance to insecticides is increasing this threat. Botanical insecticides are promising substitutes for synthetic insecticides. This study evaluated the larvicidal and growth index of Culex pipiens of four solvent extracts of Terminalia chebula, Aloe perryi, and Peganum harmala against Cx. pipiens. None of the 12 extracts exhibited larvicidal potential against third instars except the ethyl acetate extract of P. harmala. After 24 h of exposure, the LC50 value was 314.88 ppm, and the LC90 value was 464.19 ppm. At 320 ppm, the hatchability was 25.83%, and it resulted in 100% mortality. In addition, the eggs treated with the EtOAc extract of P. Harmala exhibited a long larval period compared with the control. The larval period continued for 12 days, and the pupal period took three days in the treatment groups. The growth index data also exhibited a decrease (0.00­7.53) in the treated groups compare with 8.5 in the control. The transformation of eggs into adults decreased with increasing concentrations. This paper is the first report on the development and growth index of Cx. pipiens potential using P. harmala seeds.

As doenças transmitidas por mosquitos resultam na perda de vidas e economia, principalmente em países subtropicais e tropicais, e a resistência emergente aos inseticidas está aumentando essa ameaça. Os inseticidas botânicos são substitutos promissores dos inseticidas sintéticos. Este estudo avaliou o índice larvicida e de crescimento de Culex pipiens de quatro extratos solventes de Terminalia chebula, Aloe perryi e Peganum harmala contra Cx. pipiens. Nenhum dos 12 extratos exibiu potencial larvicida contra o terceiro ínstar, exceto o extrato de acetato de etila de P. harmala. Após 24 horas de exposição, o valor LC50 era 314,88 ppm e o valor LC90 era 464,19 ppm. A 320 ppm, a eclodibilidade foi de 25,83% e resultou em 100% de mortalidade. Além disso, os ovos tratados com o extrato de EtOAc de P. harmala exibiram um longo período larval em comparação com o controle. O período larval continuou por 12 dias, e o período pupal durou três dias nos grupos de tratamento. Os dados do índice de crescimento também exibiram uma diminuição (0,00-7,53) nos grupos tratados em comparação com 8,5 no controle. A transformação de ovos em adultos diminuiu com o aumento das concentrações. Este artigo é o primeiro relatório sobre o índice de desenvolvimento e crescimento de Cx. potencial de pipiens usando sementes de P. harmala.