Resección de osteoma fronto-naso-maxilar: desafío anatómico con asistencia de estereolitografía y sistema piezoeléctrico / Resection of fronto-naso-maxillary osteoma: anatomic challenge assisted with stereolithography and piezoelectric system

Los osteomas fronto-etmoidales son los tumores benignos más frecuentes de los senos paranasales, pudiendo evolucionar con complicaciones por compresión de estructuras adyacentes. Se presenta el caso de una paciente de 63 años de edad, que consultó por aumento de volumen nasofrontal, cefalea y diplopía. Tras el examen clínico, se evidenció una asimetría facial con lateralización del bulbo ocular derecho y exoftalmo. La tomografía de los senos paranasales mostró una lesión que ocupa parcialmente el seno frontal, etmoidal y parte de la cavidad nasal. Los cuidados anatómicos y planificación quirúrgica se desarrollaron en un modelo estereolitográfico mientras que la cirugía de exéresis total se realizó con ayuda del sistema piezoeléctrico. El examen histológico confirmó el diagnostico de osteoma. Se obtuvo una reconstrucción exitosa, recuperando totalmente simetría y función ocular.

Fronto-ethmoidal osteomas are the most frequent benign tumors of the paranasal sinuses, and may evolve with complications by compression of adjacent structures. The case is a 63-year-old female patient, who consulted about increased nasofrontal volume, headache and diplopia. After the clinical exam, she presented a facial asymmetry with lateralization of the right eyeball and exophthalmus. Computed tomography of the sinuses showed a lesion that partially occupies the frontal sinus, ethmoidal sinus and part of the nasal cavity. The anatomical care and surgical planning was developed in a stereolithographic model while the total excision surgery was performed with the help of the piezoelectric system. Histological examination confirmed the diagnosis of osteoma. A successful reconstruction is obtained, fully recovering symmetry and ocular function.

Accuracy verification and reliability analysis of three-dimensional printing model in orthopedics and maxillofacial surgery / 吉林大学学报(医学版)

Objective:To discuss the accuracy of stereolithography (SLA)-3D printing model in orthopedics and maxillofacial surgery,and to clarify the reliability of its clinical application.Methods:A total of 33 cases of SLA-3D printing models were randomly included (10 long bones,13 irregular bones and 10 prostheses),and the CT scanning and three-dimensional reconstruction were performed.According to the clinical application characteristics of the models,the max height (MH),max length (ML),max width (MW),width of the trochlear (WT),length of the trochlear (LT),length of the glenoid cavity (LGC),width of the glenoid cavity (WGC),distance of pubic tubercle-anterior superior iliac spine (DPI),diameter of the acetabulum (DA),diameter of the marrow cavity (DMC),anterior height of right ramus (AHRR) and posterior height of right ramus (PHRR) were selected to measure the original data and model data,respectively.The absolute / relative errors were calculated.Intraclass correlation coefficient (ICC) was used to evaluate the consistency of the data.The three-dimensional error analysis of the prosthesis model was carried out.Results:There were no significant differences in the anatomical parameters except MW of irregular bone (P＞0.05) in 33 cases of SLA-3D printing model.The values of ICC were all greater than 0.950;the maximum values of absolute / relative errors were-0.58 mm and-1.37％,respectively;the maximum 3D error of prosthesis model was 0.237 mm,and the average value was 0.132 mm.Conclusion:The CT data of SLA-3D model is highly consistent with the original data,and it is accurate and reliable in the diagnosis and treatment of the diseases in orthopedics and maxillofacial surgery.

Accuracy verification and reliability analysis of three-dimensional printing model in orthopedics and maxillofacial surgery / 吉林大学学报(医学版)

Objective:To discuss the accuracy of stereolithography (SLA)-3D printing model in orthopedics and maxillofacial surgery,and to clarify the reliability of its clinical application.Methods:A total of 33 cases of SLA-3D printing models were randomly included (10 long bones,13 irregular bones and 10 prostheses),and the CT scanning and three-dimensional reconstruction were performed.According to the clinical application characteristics of the models,the max height (MH),max length (ML),max width (MW),width of the trochlear (WT),length of the trochlear (LT),length of the glenoid cavity (LGC),width of the glenoid cavity (WGC),distance of pubic tubercle-anterior superior iliac spine (DPI),diameter of the acetabulum (DA),diameter of the marrow cavity (DMC),anterior height of right ramus (AHRR) and posterior height of right ramus (PHRR) were selected to measure the original data and model data,respectively.The absolute / relative errors were calculated.Intraclass correlation coefficient (ICC) was used to evaluate the consistency of the data.The three-dimensional error analysis of the prosthesis model was carried out.Results:There were no significant differences in the anatomical parameters except MW of irregular bone (P＞0.05) in 33 cases of SLA-3D printing model.The values of ICC were all greater than 0.950;the maximum values of absolute / relative errors were-0.58 mm and-1.37％,respectively;the maximum 3D error of prosthesis model was 0.237 mm,and the average value was 0.132 mm.Conclusion:The CT data of SLA-3D model is highly consistent with the original data,and it is accurate and reliable in the diagnosis and treatment of the diseases in orthopedics and maxillofacial surgery.

Computer Aided Designing-Computer Aided Milling in Prosthodontics: A Promising Technology for Future.

Computer aided designing-computer aided milling (CAD-CAM) technology was introduced to dentistry way back in 1971. Over the years there has been a constant upgradation in the quality and popularity of its application to dentistry. CAD-CAM fabricated prosthesis though initially were considered costly and technique sensitive, nowadays they are being extensively used because of advancements in various CAD-CAM systems that have gained popularity. Th e ease of work and reduced chair side time makes them a boon while providing prosthodontics treatment. Dental CAD-CAM systems are being used not only for crowns and bridges, inlays and onlays but also for fabrication of removable prosthesis, stents, and implant components. Th is article reviews the evolution of the CAD-CAM system and its applications in the fi eld of dentistry over the past two and a half decades.

Considerations and Protocols in Virtual Surgical Planning of Reconstructive Surgery for More Accurate and Esthetic Neomandible with Deep Circumflex Iliac Artery Free Flap / 대한악안면성형재건외과학회지

PURPOSE: The reconstruction of mandibular defects poses many difficulties due to the unique, complex shape of the mandible and the temporomandibular joints. With development of microvascular anastomosis, free tissue transplantation techniques, such as deep circumflex iliac artery (DCIA) flap and fibular free flap (FFF), were developed. The DCIA offers good quality and quantity of bone tissue for mandibular segmental defect and implant for dental rehabilitation. Virtual surgical planning (VSP) and stereolithography-guided osteotomy are currently successfully applied in three-dimensional mandibular reconstruction, but most use FFF. There are only a few articles on reconstruction with the DCIA that assess the postoperative results. METHODS: Three patients admitted during a five month period (April of 2013 to August of 2013) underwent resection of mandible and DCIA musculo-osseous reconstruction using a VSP and stereolithographic modeling and assessment of outcomes included technical accuracy, esthetic contour, and functional outcomes. RESULTS: This technique yielded iliac bone segment with excellent apposition and duplication of the preoperative plan. Flap survival was 100 percent and all patients maintained preoperative occlusion and contour. CONCLUSION: Based on our experience, we offer considerations and logically consistent protocols by classification of mandibular defects, and demonstrate the benefits in VSP and stereolithographic modeling of mandibular reconstructive surgery with DCIA flap.

New virtual orthodontic treatment system for indirect bonding using the stereolithographic technique / 대한치과교정학회지

The purpose of this article is to introduce a new virtual orthodontic treatment (VOT) system, which can be used to construct three-dimensional (3D) virtual models, establish a 3D virtual setup, enable the placement of the virtual brackets at the predetermined position, and fabricate the transfer jig with a customized bracket base for indirect bonding (IDB) using the stereolithographic technique. A 26-year-old woman presented with anterior openbite, crowding in the upper and lower arches, and narrow and tapered upper arch, despite having an acceptable profile and balanced facial proportion. The treatment plan was rapid palatal expansion (RPE) without extraction. After 10 days of RPE, sufficient space was obtained for decrowding. After a 10-week retention period, accurate pretreatment plaster models were obtained using silicone rubber impression. IDB was performed according to the protocol of the VOT system. Crowding of the upper and lower arches was effectively resolved, and anterior openbite was corrected to normal overbite. Superimposition of the 3D virtual setup models (3D-VSM) and post-treatment 3D virtual models showed that the latter deviated only slightly from the former. Thus, the use of the VOT system helped obtain an acceptable outcome in this case of mild crowding treated without extraction. More cases should be treated using this system, and the pre- and post-treatment virtual models should be compared to obtain feedback regarding the procedure; this will support doctors and dental laboratory technicians during the learning curve.

Implant surgery based on computer simulation surgical stent and the assessment with the image fusion technique

INTRODUCTION: The planning of implant surgery is an important factor for the implant prosthesis. Stereolithographic (SLA) surgical stents based on a computer simulation are quite helpful for clinicians to perform the surgery as planned. Although many clinical and technical trials have been performed for computed tomography (CT)-guided implant stents to improve the surgical procedures and prosthetic treatment, there are still many problems to solve. We developed a system of a surgical guide based on 3 dimensional (3D) CT for implant therapy and achieved satisfactory results in the terms of planning and operation. MATERIALS AND METHODS: Fifteen patients were selected and 30 implant fixtures were installed. The preoperative CT data for surgical planning were prepared after obtaining informed consent. Surgical planning was performed using the simulation program, Ondemend3D In2Guide. The stents were fabricated based on the simulation data containing information of the residual bone, the location of the nerve, and the expected design of the prostheses. After surgery with these customized stents, the accuracy and reproducibility of implant surgery were evaluated based on the computer simulation. The data of postoperative CT were used to confirm this system using the image fusion technique and compare the implant fixtures between the planned and implanted. RESULTS: The mean error was 1.18 (+/-0.73) mm at the occlusal center, 1.23 (+/-0.67) mm at the apical center, and the axis error between the two fixtures was 3.25degrees (+/-3.00). These stents showed superior accuracy in maxilla cases. The lateral side error at the apical center was significantly different from the error at the occlusal center but there were no significant differences between the premolars, 1st molars and 2nd molars. CONCLUSION: SLA surgical stents based on a computer simulation have the satisfactory accuracy and are expected to be useful for accurate planning and surgery if some errors can be improved.

Avaliação das angulações de implantes colocados com o auxílio de guias cirúrgicos construídos por estereolitografia / Assessment of the angulations of implants placed with surgical guides built through stereolithographic

Introdução - O objetivo deste estudo foi avaliar as angulações de implantes colocados com guias cirúrgicos construídos por meio da estereolitografia. Material e Métodos - Uma mandíbula de porco dissecada foi submetida a uma tomografia computadorizada (TC), e sua imagem processada para a criação de uma imagem em 3-D. Os dados desta imagem foram trabalhados em um programa elaborado para esta finalidade (InVersalius - CenPRA), de modo a ser construído um guia cirúrgico com 4 perfurações paralelas entre si, de diâmetros de 3,2 mm. A imagem do guia cirúrgico foi levada a um equipamento de prototipagem rápida de sinterização seletiva a laser (SLS) para sua confecção, por meio da estereolitografia. Este guia foi posicionado sobre a mandíbula dissecada e as perfurações realizadas com frezas de diâmetro de 3,2 mm. Implantes Universal II (De Bortoli) com 3,75 mm de diâmetro e comprimento de 10 mm foram colocados. Através de imagens digitais e um software específico (Image Pro-plus v.4.1.0.0) a angulação entre os implantes instalados e as perfurações do guia cirúrgico foram avaliadas. Resultados - Os ângulos obtidos, em quadruplicata, foram transformados em médias e receberam o teste estatístico não paramétrico de Mann-Whitney ao nível de significância de 5%, no qual não foram observadas diferenças estatisticamente significantes (P > 0,05). Conclusões - A metodologia de prototipagem, utilizada para a confecção de guias cirúrgicos resultou em pequenas angulações dos implantes, aceitáveis clinicamente.

Introduction - The aim of this study was to evaluate the angulations of implants placed with surgical guides built through stereolithographic. Material and Methods - We used a dissect jaw of a pig, that was submited to a CT, and its image was processed for the creation of a 3-D image.The data of the 3-D image were handled in a specific program, where a surgical guide was built with four parallel drills, whose diameters were 3,2 mm. This image was taken to a specific equipament for the construction of 3-D models through stereolithographic. This surgical guide was placed over the dissected jaw and the drills were accomplished by using a drill whose diameter was 3,2 mm. Universal II (De Bortoli) implants having 3,75 mm of diameter and 10 mm of lenght were placed. Through digital images and a specific software (Image Pro-plus v.4.1.0.0) the angulation between the installed implants and the drills of the surgical guide were evaluated. Results - The angles obtained, in order to do so four specimens were made, they were transformers in media and were statistically evaluated with the Mann-Whitney no parametric test with a significance level of 5%, there was no significant statistically difference (P > 0,05). Conclusions - The prototyping method used to built surgical guide result in small angulations of implants, clinically acceptable.