Application of three-dimensional image reconstruction technology based on 3D-slicer software in urology / 国际外科学杂志

Objective:To investigate the application value of three-dimensional image reconstruction technology based on 3D-slicer software in urology.Methods:The data of 36 patients with urinary tract diseases admitted to Beijing Friendship Hospital, Capital Medical University from May 2019 to December 2021 were retrospectively analyzed, including 20 males and 16 females; the median age was 53.50(41.75, 66.25) years. There were 10 relative kidney transplant donors, 12 cases with renal tumors, 6 cases with hydronephrosis and 8 patients with urinary calculi. The CT urography data of 36 cases were reconstructed into three-dimensional image models based on 3D-slicer software, and the morphology of the target tissue was measured.Results:In the urinary system model of 10 relative kidney transplant donors constructed in this study, the type of donor renal artery was single artery in 7 cases and accessory renal artery in 3 cases; In the three-dimensional model of 12 tumor kidneys, 4 tumors were located at the upper part of the kidney (2 near ventral and 2 near dorsal), 5 tumors were located at the middle part of the kidney (2 near ventral and 3 near dorsal), and 3 tumors were located at the lower part of the kidney near ventral. The average maximum diameter of the tumors was (27.3 ± 9.63) mm, and the tumor volume was (15.89 ± 5.93) cm 2. The study also successfully constructed a three-dimensional image model of the urinary system in 6 patients with hydronephrosis and 8 patients with urinary calculi (without hydronephrosis). Three-dimensional model image reconstructed by 3D-slicer software clearly showed the spatial structure of renal parenchyma, blood vessels, renal pelvis, calyces and ureter. The diameter, position and direction of ureters and blood vessels can be observed clearly based on the three-dimensional reconstruction model, and clinicians could also evaluate the location, shape, size and adjacent relationship with surrounding tissues of renal cysts, tumors, stones or other masses. Conclusion:3D-slicer software platform can assist clinicians to reconstruct the three-dimensional model of urinary system, which is worthy of further clinical application.

Application of preoperative three-dimensional image reconstruction in the treatment of ureteropelvic junction obstruction / 北京大学学报(医学版)

OBJECTIVE@#To investigate the value of preoperative three-dimensional image reconstruction in the treatment of ureteropelvic junction obstruction (UPJO).@*METHODS@#We reviewed data on 40 patients (22 male cases, and 18 female cases) diagnosed with UPJO in Peking University First Hospital from May 2017 to April 2019. The median age was 26.5 years (IQR 23.25-38.75) years. There were 11 patients complicated with ectopic vessels, 14 patients with kidney stones, 3 patients with horseshoe kidney, and 6 patients with obstruction after pyeloplasty. All the patients underwent preoperative enhanced CT scan, and the CT data were reconstructed into three-dimensional image models. The obstruction position of ureteropelvic junction and the relationship between ureteropelvic junction and blood vessels and organs were observed by three-dimensional models to assist planning surgery. Thirty-seven patients underwent laparoscopic pyeloplasty (including 3 cases combined with pyelolithotomy with flexible cystoscope, 1 case combined with pyelolithotomy by sun-style cystoscope, 1 case with laparoscopic ureter resection and anastomosis, 3 cases of laparoscopic pyeloplasty of horseshoe kidney), 2 patients underwent laparoscopic ventral onlay lingual mucosal graft ureteroplasty, and 1 patient underwent robot-assisted laparoscopic pyeloplasty.@*RESULTS@#Three-dimensional CT image clearly showed the relationship between the obstruction of ureteropelvic junction and blood vessels and organs after three-dimensional reconstruction. The type, diameter, position and direction of the ectopic vessels could be observed clearly before operation according to the three-dimensional reconstruction model, and the number, size, location and shape of renal calculi or other masses, the number of involved renal calyces and the anatomical distribution in the renal pelvis and calyces could be also evaluated preoperatively. After comprehensive analysis of the above information, individualized operation plans were performed on the patients, all the 40 cases were successfully completed with the surgery without any transfer to open surgery. The average operative time was (129.91±37.90) min (range: 75 to 273), the average blood loss was (48.1±78.0) mL (range: 10 to 400), the average hospitality was (5.04±1.99) d (range: 2 to 10), and the average postoperative drainage time was (3.8±1.4) d (range: 2 to 8).@*CONCLUSION@#The preoperative three-dimensional image reconstruction has a high clinical value in the treatment of ureteropelvic junction obstruction, and it is of great help to assist surgery planning and is worthy of further clinical promotion and application.

A precise method of marking pulmonary nodules based on body surface mesh and three-dimensional image reconstruction / 中国胸心血管外科临床杂志

@#Objective    To explore the safety and effectiveness of a precise marking method based on body surface mesh and three-dimensional (3D) image reconstruction. Methods    We retrospectively analyzed the clinical data of 22 patients in our hospital from October 2018 to October 2019. There were 13 males and 9 females aged 58.5 (37-72) years. All patients underwent a precise marking of pulmonary nodules based on body surface mesh and 3D image reconstruction. Then, video-assisted thoracoscopic surgery (VATS) was performed to resect the nodules. The clinical data, including positioning success rate and operation time were analyzed. Results    A total of 22 small pulmonary nodules were removed. The average diameter of small nodules was 12±3 mm, and the average distance from the visceral pleura was 17±6 mm. The localization success rate was 86.4%. The operation time was 110±43 min, and there was no surgery-related complication. Conclusion    The method of marking pulmonary nodules based on body surface mesh and 3D image reconstruction is a safe and reliable technology, which reduces the risk of hemopneumothorax caused by CT-guided lung puncture.

Three-dimensional image reconstruction and anthropometry of nasal cartilages in Chinese / 中华医学美学美容杂志

Objective To conduct a morphologic and anatomic study on nasal cartilages (including nasal alar cartilage, nasal septal cartilage and upper lateral cartilage) in Chinese, and to compare measured parameters with the other races. Methods 20 adult embalmed cadavers were dissected, 40 nasal alar cartilages, 20 nasal septal cartilages and 40 upper lateral cartilages were collected and scanned by CT, and three-dimensional images were reconstructed. As Zelnik' and Ofodile's work, the data of the images were collected. Results The distances from the nostril rim to the caudal boarder of the lateral crus in the series were (4. 54 ±0. 59) mm anteriorly, (5. 54±0. 69) mm in the middle, and (10. 45± 1. 15) mm posteriorly. The length of the lateral crus was (18. 51 ±1. 63) mm, the width was (7. 99±1. 66) mm, and the thickness was (0. 49±1. 28) mm. Conclusion The Caucasian nasal cartilages are the biggest in all races, and the other's were approximately same.

A Case of Three-Dimensional Image Reconstruction of Pulmonary Venous Return

A case of supracardiac type of total anomalous pulmonary venous return into the superior vena cava is reported which was successfully diagnosed using spiral CT and three-dimensional image reconstruction. Spiral CT with three-dimensional reconstruction is non-invasive method of visualizing the vascular system and in some instances can replace conventional angiography in pediatric patients.

Diagnostic Method of Congenital Cardiovascular Diseases Using Spiral Computed Tomography and Three Dimensional Reconstruction

PURPOSE: One of the new methods for diagnosing congenital cardiovascular diseases is the spiral CT and three-dimensional image reconstruction. The spiral CT allows continuous data collection while the subject is advanced through the CT gantry, it provides an uninterrupted volume of data that can be reconstructed to produce a three-dimensional representation of CT information and also this method has created CT angiography that provides more detailed information with a global view of the vascular structure. So the author applied this technique in diagnosis of selected cases of congenital cardiovascular diseases. METHODS: Eight cases were admitted to evaluate congenital cardivascular diseases by using this method to obtain detailed information of great vessel anomaly at Soonchunhyang University Chunan Hospital from May 1995 to July 1997. RESULTS: Eight cases aged 3 days to 34 years. There were four cases of coractation of aorta, right aberrant subclavian artery, absence pulmonary valve syndrome, total anomalous pulmonary venous return and major aorticopulmonary collateral. In four of eight cases, cardiac angiography was undertaken and in one case, barium esophagography was undertaken, and in two cases, MR angiography was undertaken. Comparing images from each procedure, identical images were obtained. Of the eight cases, four cases had coractation of the aorta; absence pulmonary valve syndrome and total anomalous pulmonary venous return. Operation was performed and operative findings were identical to images from spiral CT and three-dimensional image reconstruction. CONCLUSION: It is possible to introduce spiral CT and three-dimensional image reconstruction methods for the diagnosis of congenital cardiovascular diseases.