Comparison of Anatomic Locking Titanium Plate and Intramedullary Nail in the Treatment of Distal Tibial Fractures / 中山大学学报(医学科学版)

ObjectivesTo compare the clinical efficacy and complications of anatomic locking titanium plate （hereinafter referred to as “titanium plate screw”） and intramedullary nail in the treatment of distal tibial fractures.Methods From September 2019 to September 2021， 32 patients diagnosed with AO-A fracture of distal tibia at Sun Yat-sen Memorial Hospital of Sun Yat-sen University were included in this study. Of these， 15 cases were treated with titanium plate screws and 17 cases were treated with intramedullary nails. General surgical indexes， fracture healing time and postoperative operation were compared between the two groups.ResultsAll patients were followed up for 10 to 20 months， with an average of 12 months. The operative time and intraoperative fluoroscopy times of intramedullary nail group were longer than those of titanium plate screw group， but the preoperative waiting time and hospitalization days was less or were fewer than those of titanium plate screw group， the difference was statistically significant （P < 0.05）. There was no significant difference in fracture healing time between the two groups （P> 0.05）. At 6 weeks after operation， VAS scores in both groups were lower than those before operation， with statistically significant difference （P<0.05）. There was no significant difference in VAS scores between the intramedullary nail group and the titanium plate screw group （P> 0.05）. AOFAS scores 6 months after surgery， ankle joint motion and complication rate 1 year after surgery in intramedullary screw group were better than those in titanium plate screw group， and the differences were statistically significant （P< 0.05）. There was no significant difference in AOFAS scores between the two groups at 1 year after operation （P> 0.05）.ConclusionTitanium plate screw and intramedullary nail are both effective methods for the treatment of distal tibial AO-A fracture， and there is no significant difference in long-term clinical efficacy. Intramedullary nail has fewer soft tissue complications， less impact on ankle motion， faster recovery and higher safety， while titanium plate screw has a higher probability of postoperative soft tissue infection. We suggest that in clinical work， preoperative evaluation of patients should be done well. Under the premise of grasping the indications， intramedullary nail has fewer complications and certain advantages.

In vitro study on cyclic fatigue resistance of three types of nickel titanium files in preparation for bending root canals / 口腔疾病防治

Objective@#The purpose of this study was to investigate the differences in the anti cyclic fatigue performance of Woride KS (WKS), Proteper Gold (PTG), and Hyflex CM (HCM) nickel titanium instruments with different tip diameters in curved root canal models, and to provide reference for the targeted selection of suitable nickel titanium instruments in clinical preparation of curved root canals.

Preparation of an amino hybrid mesoporous silica-based nanotopography protective coating on a titanium implant surface and evaluation of its osteogenic effect / 口腔疾病防治

Objective@#To deposit degradable amino-hybrid mesoporous silica (AHMS) in situ on the surface of titanium nanotube (TNT) and explore its protective effect on nanomorphology and osteogenesis.@*Methods@#TNT and TNT@AHMS were sequentially prepared via an anodizing method: the oil-water two-phase method (experimental group) and the acid-etched titanium method [control group (Ti)]. The parameters for synthesis were explored by changing the silicon source dosage ratio (3∶1, 1∶1, 1∶3); the surface morphology was observed by scanning electron microscope(SEM), hydrophilicity was detected by Water Contact Angle Tester, elemental composition was detected by X-ray photoelectron spectroscopy (XPS); nanoindentation test and ultrasonic oscillator were used to observe the morphological holding effect as mechanical strength of TNT@AHMS in vitro; simulated immersion experiments in vitro was used to observe the degradation behavior of the material. the MC3T3-E1 cell line was used to observe the effect of cell adhesion, proliferation and differentiation on the material; and an SD rat femoral implant model and micro-CT were used to verify the protective effect and osseointegration effect of AHMS on TNT morphology.@*Results@#The morphologies of TNT and TNT@AHMS were successfully prepared, and the silicon source ratio was 1:3. SEM showed that the titanium nanotubes were uniformly covered with AHMS coating, and the mesoporous pore size was about 4 nm. After AHMS was incorporated, the surface of the material was hydrophilic (12.78°), the presence of amino groups (NH2-) was detected, the material was completely degraded within 12 h in vitro, and the active morphology of the TNT was re-exposed with a cumulative silicon release of 10 ppm. Nanoindentation test showed that TNT@AHMS exhibited more ideal surface mechanical strength. SEM revealed that TNT maintains its own morphology under the protection of AHMS, and the TNT group suffered severe exfoliation. In addition, the early adhesion and proliferation rates, ALP activity, and bone volume fraction of cells on the TNT@AHMS surface 4 weeks after implantation were significantly higher than those in the TNT group.@*Conclusion@#By depositing AHMS on the surface of TNT, the nanotopography can be protected. It not only prevents the active base topography from exerting subsequent biological effects but also further endows the material with the ability to promote bone regeneration, laying a foundation for the future development of nanotopography-modified titanium implants.

Autologous ilium graft combination with titanium plate for sternal reconstruction: A case report / 中国胸心血管外科临床杂志

@#The sternum is the pivotal component of the thoracic cavity. It is connected with the clavicle and ribs on the upper part and both sides respectively, and plays an important role in protecting the stability of the chest wall. Sternal resection usually results in a large segmental chest wall defect that causes the chest wall to float and requires sternal reconstruction. This paper reports a 62 years male patient with thymic squamous cell carcinoma with sternal metastasis, who underwent thymotomy, sternal tumor resection and autologous lilum graft combined with sternal reconstruction by titanium plate after relevant examination was completed and surgical contraindications were eliminated. The patient was followed up for 6 months, the respiratory and motor functions were normal and the thoracic appearance was good.

Nanotopography and oral bacterial adhesion on titanium surfaces: in vitro and in vivo studies

Abstract The present study aimed to evaluate the influence of titanium surface nanotopography on the initial bacterial adhesion process by in vivo and in vitro study models. Titanium disks were produced and characterized according to their surface topography: machined (Ti-M), microtopography (Ti-Micro), and nanotopography (Ti-Nano). For the in vivo study, 18 subjects wore oral acrylic splints containing 2 disks from each group for 24 h (n = 36). After this period, the disks were removed from the splints and evaluated by microbial culture method, scanning electron microscopy (SEM), and qPCR for quantification of Streptococcus oralis, Actinomyces naeslundii, Fusobacterium nucleatum, as well as total bacteria. For the in vitro study, adhesion tests were performed with the species S. oralis and A. naeslundii for 24 h. Data were compared by ANOVA, with Tukey's post-test. Regarding the in vivo study, both the total aerobic and total anaerobic bacteria counts were similar among groups (p > 0.05). In qPCR, there was no difference among groups of bacteria adhered to the disks (p > 0.05), except for A. naeslundii, which was found in lower proportions in the Ti-Nano group (p < 0.05). In the SEM analysis, the groups had a similar bacterial distribution, with a predominance of cocci and few bacilli. In the in vitro study, there was no difference in the adhesion profile for S. oralis and A. naeslundii after 24 h of biofilm formation (p > 0.05). Thus, we conclude that micro- and nanotopography do not affect bacterial adhesion, considering an initial period of biofilm formation.

Evaluation the scanning accuracy of Blue-Light laboratory scanners in complete edentulous Maxilla with multiple implants with titanium scan bodies / Evaluación de la precisión de escaneado de los escáneres de laboratorio de luz azul en maxilares desdentados completos con implantes múltiples con cuerpos de escaneado de titanio

Abstract To evaluate the accuracy of complete arch scanning with multiple implant titanium scan bodies using laboratory scanners. A master model of an edentulous maxillary arch with 6 implants was fabricated. Titanium scan bodies were inserted into the model. Three laboratory scanners were used: D2000 (3Shape), Vinyl High Resolution (Smart Optics), and inEos X5 (Dentsply Sirona). The master model was consecutively scanned ten times using dental laboratory scanners (LS) without detaching and repositioning the scan bodies. Linear and angular accuracy between adjacent implants was measured using inspection software (Control X, Geomagic). The accuracy of the complete arch scans was calculated. Implant regions were defined as; parallel (R1: #24-26 and #16-14), angled (R2: #22-24 and #14-12), angled to occlusal plane (R3: #12-22), and cross-arch (R4: #16-26). The effect of LS and implant region on accuracy was compared using two-Way ANOVA (α=0.05). Significant greater linear distortion was noted in R4 (61.2±17.9µm) compared to R1 (23.4±15.5µm) and R2 (26±17.7µm) (p<0.01). Greater linear distortions were noted in R4 with D2000 (0.07±0.016 degrees) and Vinyl High Resolution (0.067±0.02 degrees) than inEos X5 (0.032±0.021 degrees) (p>0.05). Greater mean linear precisions were noted in R1 (9±8µm) and R3 (9.3±8.3µm) than R4 (12.6±10.3µm) (p<0.05). The highest linear precision was noted in D2000 (7.2±7.6µm) (p<0.05). The angular precision of D2000 (0.02±0.015 degrees) was the highest (p<0.01). The angular precisión of R4 (0.036±0.018 degrees) was the lowest (p<0.01). This study revealed that the trueness was affected by the implant region and the precision was affected by both LS and implant region.

Resumen Evaluar la precisión del escaneado de la arcada completa con cuerpos de escaneado de titanio de múltiples implantes utilizando escáneres de laboratorio. Se fabricó un modelo maestro de una arcada maxilar edéntula con 6 implantes. Se insertaron cuerpos de escaneo de titanio en el modelo. Se utilizaron tres escáneres de laboratorio: D2000 (3Shape), Vinyl High Resolution (Smart Optics) e inEos X5 (Dentsply Sirona). El modelo maestro se escaneó consecutivamente diez veces usando escáneres de laboratorio dental (LS) sin separar y reposicionar los cuerpos de escaneo. La precisión lineal y angular entre implantes adyacentes se midió utilizando un software de inspección (Control X, Geomagic). Se calculó la precisión de los escaneos completos del arco. Las regiones del implante se definieron como; paralelo (R1: #24-26 y #16-14), angulado (R2: #22-24 y #14-12), angulado al plano oclusal (R3: #12-22) y cruzado (R4: #16-26). El efecto de LS y la región del implante en la precisión se comparó mediante ANOVA de dos vías (α=0,05). Se observó una distorsión lineal significativamente mayor en R4 (61,2±17,9µm) en comparación con R1 (23,4±15,5µm) y R2 (26 ±17,7µm) (p<0,01). Se observaron mayores distorsiones lineales en R4 con D2000 (0,07±0,016 grados) y vinilo de alta resolución (0,067±0,02 grados) que en inEos X5 (0,032±0,021 grados) (p>0,05). Se observaron precisiones lineales medias mayores en R1 (9±8µm) y R3 (9,3±8,3µm) que en R4 (12,6±10,3µm) (p<0,05). La mayor precisión lineal se observó en D2000 (7,2±7,6 µm) (p<0,05). La precisión angular de D2000 (0,02±0,015 grados) fue la más alta (p<0,01). La precisión angular de R4 (0,036±0,018 grados) fue la más baja (p<0,01). Este estudio reveló que la veracidad se vio afectada por la región del implante y la precisión se vio afectada tanto por LS como por la región del implante.

Comparación Placas de Titanio vs. Placas Reabsorbibles en Fracturas de Orbita: Revisión de literatura / Comparison of Titanium Plates vs. Resorbable Plates in Orbital Fractures: Literature Review

RESUMEN Introducción: Los tratamientos para fracturas de órbita se basan en la corrección del defecto de las lesiones orbitarias de tipo blow in y blow out (o de estallido), mediante diversas placas y mallas biocompatibles con el organismo, dándose una cicatrización de primera generación evitando un callo óseo y una fijación más rígida. Para el diagnóstico de este tipo de lesiones tenemos inflamación periorbitaria, enoftalmos, diplopía, equimosis, hemorragia subconjuntival. Existen diversos materiales reconstructivos siendo estos compuestos por distintas materias primas, como son los aloplásticos y autógenos; donde encontramos varios tipos como placas de titanio y las placas reabsorbibles siendo estas las más comunes y usadas actualmente, por su bajo estímulo a reabsorciones óseas y evitando efectos secundarios a largo plazo. Estas placas presentan diversos grados de ductilidad y resistencia. Se informó sobre varias complicaciones según el tipo de placas como es la cicatrización, las cirugías postquirúrgicas en caso de placas de titanio, etc. El objetivo de esta revisión es la evaluación de la eficacia las placas reabsorbibles versus placas de titanio en fracturas de órbita. Materiales y métodos: La investigación es de carácter documental, descriptivo y no experimental. En el cual se emplea una metodología de identificación e inclusión de artículos científicos tipo prisma. Resultados y conclusiones: Se verificaron las ventajas y desventajas tanto de las placas reabsorbibles como las de titanio siendo estas similares en la biocompatibilidad con el organismo humano, así como también varias diferencias como el soporte, fuerzas, resistencia de estas, concluyendo que es debatible el material ideal para tratar fracturas de órbita. Se seleccionaron artículos tomando en cuenta el título y objetivos; considerando estudios comparativos, revisiones sistemáticas, revisiones de literatura, los cuales comprendían criterios con respecto a fracturas de órbita y tratamientos quirúrgicos. La búsqueda arrojó 55 artículos en PubMed, 65 en Google, 4 en Scielo y 29 en Science direct, de los cuales se excluyeron libros, monografías, estudios experimentales, dando como resultado 21 artículos para el desarrollo de esta revisión bibliográfica. Y que fueron leídos y analizados en su totalidad, estudiando los objetivos, metodología y conclusión de cada uno de ellos para la posterior comparación.

ABSTRACT Introduction: Treatments for orbit fractures are based on the correction of the defect of blow in and blow out orbital injuries, by means of various plates and meshes biocompatible with the organism, giving a first-generation healing avoiding a bony callus and a more rigid fixation. For the diagnosis of this type of lesions we have periorbital inflammation, enophthalmos, diplopia, ecchymosis, subconjunctival hemorrhage. There are several reconstructive materials being these composed of different raw materials, such as alloplastic and autogenous, where we find several types such as titanium plates and resorbable plates being these the most common and currently used, for its low stimulus to bone resorption and avoiding long-term side effects. These plates have different degrees of ductility and resistance. Several complications have been reported depending on the type of plates, such as scarring, post-surgical surgeries in the case of titanium plates, etc. The objective of this review is to evaluate the efficacy of resorbable versus titanium plates in orbital fractures. Materials and methods: This research are a documentary, descriptive and non-experimental nature. A prism-type methodology of identification and inclusion of scientific articles was used. Results and conclusions: The advantages and disadvantages of both resorbable and titanium plates were verified, being these similar in biocompatibility with the human organism, as well as several differences such as support, forces, resistance of the same, concluding that it is debatable. The ideal material to treat orbital fractures. Articles were selected considering the title and objectives; considering comparative studies, systematic reviews, literature reviews, which included criteria regarding orbital fractures and surgical treatments. The search yielded 55 articles in PubMed, 65 in Google, 4 in Scielo and 29 in Science direct, from which books, monographs, experimental studies were excluded, resulting in 21 articles for the development of this bibliographic review. The 21 articles were read and analyzed in their entirety, studying the objectives, methodology and conclusion of each one of them for subsequent comparison.

CYCLIC AND TORSIONAL FATIGUE RESISTANCE OF THERMALLY TREATED ROTARY NiTiINSTRUMENTS WITH DIFFERENT DESIGNS

Aims: The aim was to evaluate the cyclic and torsional fatigue resistance among thermally treated NiTi rotary instruments with different design features.Materials and methods: Sixty instruments of three systems were used (n=20): TruNatomy 26.04 (TN 26.04), BassiLogic 25.05 (BL 25.05), and Flat File 25.04 (FF 25.04). The cyclic fatigue test (n=10) was performed to evaluate the time to fracture (s) and the number of cycles until failure (NCF). The torsion test was performed to evaluate the torque (N.cm) and maximum angular deflection until fracture (n=10). The fracture surface of each fragment was examined under a scanning electron microscope. The data were analyzed by Tukey's test (p<0.05).Results: BL 25.05 and FF 25.04 instruments had a higher number of cycles and time to fracture compared with TN 26.04 (p<0.05). TN 26.04 instruments showed lower torque to fracture.Conclusions: Based on the proposed objectives and the methodology used, TruNatomy 26.04 instruments present lower resistance to cyclic fatigue and torsional fatigue when compared to BassiLogic 25.05 and Flat File 25.04 instruments.

Comparative Assessment of Contact Osteogenesis at the Titanium Implant-Bone Junction in Male Rabbits with Dissimilar Femoral Defects / Evaluación Comparativa de la Osteogénesis de Contacto en la Unión entre el Hueso y el Implante de Titanio en Conejos Macho con Defectos Femorales Diferentes

SUMMARY: Traumatized bone tissue has the capacity to repair itself so that it eventually regains its almost original form, even in the case of artificially inserted implants. The process that stays at the base of the regeneration is represented by osteogenesis or remote osteogenesis. The major difference between the two types of bone formation is the location of the cement line, which is located on the surface of the implant for contact osteogenesis and on the surface of the bone defect for remote osteogenesis. The aim of the present study was to assess the contact osteogenesis in the case of inserted titanium screws in holes with diameters of 1.8 mm and 1 mm respectively. The obtained results show, in the case of the groove with 1.8 mm that the newly proliferated bone represents 73.85 % of the total area, while in the case of the groove with 1 mm in diameter the value of the newly proliferated bone is 26.15 %. In conclusion, the insertion of titanium screws by self-tapping into the hole smaller than the core of the screw is accompanied by bone proliferation by contact osteogenesis much more modest than in the case of insertion into the hole larger than the core of the screw.

El tejido óseo traumatizado tiene la capacidad de reparar en forma espontánea, de modo que eventualmente recupera su forma casi original, incluso en el caso de implantes insertados artificialmente. El proceso que queda en la base de la regeneración está representado por la osteogénesis u osteogénesis a distancia. La principal diferencia entre los dos tipos de formación ósea es la ubicación de la línea de cemento, que se encuentra en la superficie del implante para la osteogénesis de contacto y en la superficie del defecto óseo para la osteogénesis remota. El objetivo del presente estudio fue evaluar la osteogénesis de contacto en el caso de tornillos de titanio insertados en forámenes con diámetros de 1,8 mm y 1 mm respectivamente. Los resultados obtenidos muestran, en el caso del surco de 1,8 mm que el hueso neoproliferado representa el 73,85 % del área total, mientras que en el caso del surco de 1 mm de diámetro el valor del hueso neoproliferado es del 26,15 %. En conclusión, la inserción de tornillos de titanio por autorroscantes en el foramen menor que el núcleo del tornillo se acompaña de una proliferación ósea por osteogénesis de contacto mucho más modesta que en el caso de la inserción en el foramen mayor que el núcleo del tornillo.

UTILIZAÇÃO CLÍNICA DO TETRAFLUORETO DE TITÂNIO NA ODONTOLOGIA: UMA REVISÃO CRÍTICA / CLINICAL USE OF TITANIUM TETRAFLUORIDE IN DENTISTRY: A CRITICAL REVIEW

Objetivo: avaliar a eficácia preventiva e terapêutica do tetrafluoreto de titânio (TiF4) em ensaios clínicos randomizados (ECR) e não randomizados (N-ECR). Materiais e Métodos: estudos sobre a eficácia do tetrafluoreto de titânio em esmalte e dentina, testado em diferentes veículos e formulações, foram obtidos nas seguintes bases de dados: PubMed, Cochrane Library, Scopus, Web of Science, LILACS/BBO e EMBASE, sem limite de ano de publicação ou idioma. Resultados: seis estudos com abordagem preventiva e terapêutica do TiF4 sobre a superfície dentária foram incluídos. Destes, três ECR e três N-ECR. Por meio da tabulação e categorização dos artigos, notou-se que o TiF4 obteve efeito positivo na prevenção da cárie em três estudos; efeito nulo no tratamento de lesões cariosas em dois; e apenas um estudo apresentou efeito negativo no tratamento da erosão quando comparado aos outros compostos fluoretados. Conclusão: Embora haja estudos na literatura, com distintos delineamentos metodológicos comprovando a eficácia do TiF4, tanto na prevenção quanto no tratamento de lesões de cárie e erosivas, ainda é necessário que mais ensaios clínicos randomizados sejam realizados, com o intuito de validar a eficácia da utilização clínica deste composto fluoretado.

Objective: to analyze the preventive and therapeutic efficacy of titanium tetrafluoride (TiF4) in studies with a methodological design based on randomized clinical trials (RCT) and non-randomized (N-RCT). Materials and Methods: data on the behavior of titanium tetrafluoride in enamel and dentin, tested in several vehicles and formulations, were extracted in the following databases: PubMed, Cochrane Library, Scopus, Web of Science, LILACS/BBO and EMBASE, without limitation of publication year or language. Results: six studies were obtained with preventive and therapeutic approach of TiF4 on the dental surface. Three studies were RCT and three were N-RCT. Through tabulation and categorization of articles, it was noticed that TiF4 showed a positive effect in caries prevention in three studies; a null effect in caries treatment was observed in two; and only one study had a negative effect in erosion treatment when compared to the other fluoridated compounds. Conclusion: Although there are several studies in the literature, with different methodological designs, proving the efficacy of TiF4 both in prevention and in therapeutic treatments of caries and dental erosion, it is still necessary that more clinical controlled studies be conducted, in order to validate the clinical use efficacy of this fluoride compound.

STUDY ON THE EFFECT OF BRASS AND COPPER ELECTRODES DURING ELECTRIC DISCHARGE MACHINING OF INCONEL 718 USING NANO PARTICLES MIXED DIELECTRIC FLUID.

Electrical Discharge Machine (EDM) parameters have a significant influence on machining characteristic like material removal rate (MMR) and tool wear rate (TWR). Inconel 718, which is widely used in the Medical, Marine, Architectural and food processing industries, is used as a work material. The tool electrode materials used are brass and copper. Experiments are conducted using face centered central composite design to determine the effects of process parameters like current rate, pulse on time, pulse off time and concentration of titanium carbide nano particle in dielectric fiuid. Based upon the experimental outcomes, the effect of brass and copper electrodes during electric discharge machining of Inconel 718 using nano particles mixed dielectric fiuid was investigated.

ASSESSMENT OF TORSION RESISTANCE OF GLIDE PATH ROTARY INSTRUMENTS

NiTi endodontic instruments for glide path are the most susceptible to fractures inside the root canal, mainly as a result of high torsional stress. Objective: The present study investigated the resistance to torsion and angular deflection of instruments destined for the glide path: ProGlider #16.02; T-File #17.02 and the MK Life #16.02. Materials and methods: Thirty rotating NiTi glide path instruments (n=10) with 25mm lengths were selected. The torsion test was performed based on ISO 3630-01 (1992). Three millimeters from the tip of the instruments, it was attached to a small load cell by a lever arm connected to the torsion shaft. Torsional strength and angular deflection were evaluated. Fracture surfaces were examined by scanning electron microscopy with magnifications of 1000x and 5000x in the cross section, and 50x in the lateral section. Statistical analysis was performed using the Kruskal-Wallis H test, followed by the Down's post hoc test. Results: The ProGlider instrument showed greater torsional strength (p<0.05) compared to the T-File (p<0.05) and MK Life (p<0.05), respectively. However, the T-File showed greater angular deflection (p<0.05) than the other groups tested. Conclusion: It can be concluded that the ProGlider instrument presented greater torque for the fracture, while the T-File instrument presented greater angular deflection.

Inhibitory Effect of Gallium Nitrate against Staphylococcus aureus and Its Action on the Formation of Biofilms on Titanium Surfaces

Aims: This study aimed to investigate the effect of gallium nitrate [Ga(NO3)3], an inorganic antimicrobial agent, against the growth and biofilm formation of Staphylococcus aureus on the titanium surface. Study Design: This study is a laboratory investigation involving the determination of the inhibitory concentration (IC) of Ga(NO3) 3 against the planktonic strain of S. aureus and biofilm formation on titanium coupons. Place and Duration of Study: Sample: Center of Science and Technology for Sustainability (CCTS), Federal University of São Carlos, SP, Brazil, between March 2020 and March 2022. Methodology: The inhibitory concentration of gallium nitrate was determined in a 96-well microtiter plate in Muller Hinton broth. The potential of the antimicrobial agent to inhibit biofilm formation by S. aureus on titanium surfaces was evaluated by Scanning Electron Microscopy (SEM). The cytotoxicity potential of Ga(NO3)3 was determined on V79 cells. Results: The results showed that the susceptibility of gallium nitrate against S. aureus was 1.40 µM, while SEM images revealed that concentrations of 90 µM inhibited biofilm formation by S. aureus. Conclusion: This research has shown promising results regarding gallium nitrate's potential of inhibiting the growth of both planktonic and sessile S. aureus cells. In addition, coating titanium surfaces with Ga(NO3)3 would be an extra alternative to prevent implant-associated infections due to its non-toxicity to cells.

Regulación de la implantología dental en México / Regulation of dental implantology in Mexico

Introducción: los implantes dentales se han convertido en uno de los tratamientos odontológicos con mayor demanda en todo el mundo, no sólo por el nivel máximo de funcionalidad y de estética, sino también debido a su estabilidad, osteointegración y facilidad en su rehabilitación. Es incierto si los implantes dentales se encuentran normados formalmente en México, lo que motiva a la revisión del estado actual. Objetivo: evidenciar el estado actual de la legislación de la práctica de la implantología dental en México a través de una revisión en la literatura. Material y métodos: revisión de las legislaciones existentes en México para la aplicación de implantes dentales y su contraparte en el mundo a través de la evaluación de normas expedidas en América y Europa. Resultados: se contabilizó un total de 17 escuelas de implantes dentales que cuentan con el reconocimiento de la Secretaría de Educación Pública, de las cuales tres son públicas y 14 privadas. Se presentó una discrepancia en los planes de estudio que va de 16 a 36 meses. Las escuelas no contaron con un aval normativo. Las normas internacionales para control de calidad y aplicación de la tecnología en implantes se ubicaron en Canadá, Estados Unidos, España, Reino Unido y Francia. Conclusiones: contar con un antecedente normativo establecido por los países de primer mundo y ausente en México permite evidenciar la necesidad de implementar una Norma Oficial Mexicana que regule la fabricación, distribución y almacenamiento de los implantes dentales en México. A la vez, la revisión sugiere que la Secretaría de Educación Pública norme los créditos mínimos necesarios en las instituciones educativas reconocidas para la formación de recursos humanos que ejercen la implantología dental (AU)

Introduction: dental implants have become one of the dental treatments with the highest demand in the world, not only because of the highest level of functionality and aesthetics, but also because of their stability, osseointegration and ease of rehabilitation. It is uncertain if dental implants are formally regulated in Mexico, which motivates the review of the current status. Objective: to demonstrate the current state of the legislation for the practice of dental implantology in Mexico through a review of the literature. Material and methods: review of the existing legislation in Mexico, for the application of dental implants and its counterpart in the world, through the evaluation of standards issued in America and Europe. Results: a total of 17 dental implant schools that have the recognition of the Ministry of Public Education were counted, of which 3 are public and 14 private. There was a discrepancy in the study plans that ranged from 16 to 36 months. Schools will not have regulatory backing. The international standards for quality control and application of technology in implants were located in Canada, the United States, Spain, the United Kingdom and France. Conclusions: having a normative antecedent established by the countries of the first world and absent in Mexico, allows to demonstrate the need for the implementation of an Official Mexican Standard, which regulates the manufacture, distribution and storage of dental implants in Mexico. At the same time, the review suggests that the Ministry of Public Education regulate the minimum necessary credits in recognized educational institutions, for the training of human resources that practice dental implantology (AU)

Influence of temperature on the torsional properties of two thermally treated NiTi rotary instruments

Abstract This study aimed to evaluate the influence of temperature on torsional strength and angular deflection of two experimental NiTi rotary instruments manufactured from Blue and Gold thermal treatments and with identical cross-sections. A total of 40 experimental NiTi instruments 25.06 and with a triangular cross-section and manufactured from Blue and Gold thermal treatments were used (n=20). The torsional test was performed in the 3 mm from the tip of the instrument according to ISO 3630-1. The torsional test evaluated the torsional strength and angular deflection to failure at room temperature (21°C ± 1° C) and body temperature (36°C ±1°C). The fractured surface of each fragment was observed by using scanning electron microscopy (SEM). Data were analyzed using an unpaired t test for inter and intra-group comparison and the level of significance was set at 5%. The results showed that the body temperature did not affect the torsional strength and angular deflection of the instruments when compared with room temperature (P>0.05). However, at body temperature, the Blue NiTi instruments presented significantly lower angular deflection in comparison with Gold NiTi instruments (P<0.05). There was no significant difference regarding the torsional strength of the instruments at body temperature (P>0.05). The temperature did not affect the torsional strength of the instruments manufactured from Blue and Gold technology. However, the Blue NiTi instruments presented significantly lower angular deflection than Gold instruments at 36°C temperature.

Resumo O objetivo deste estudo foi avaliar a influência da temperatura nas propriedades de torção (resistência à torção e deflexão angular) de dois instrumentos rotatórios experimentais de NiTi fabricados com secção triangu.ar e tratamentos térmicos Blue e Gold. Quarenta instrumentos experimentais de NiTi 25.06 com tratamento térmico Blue e Gold foram usados (n= 20). Foi avaliada a resistência torcional e a deflexão angular até a fratura na temperatura ambiente (21°C ± 1°C) e corporal (36°C ± 1°C). O teste torcional foi realizado nos 3 mm da ponta dos instrumentos de acordo com a ISO 3630-1. A superfície fraturada de cada instrumento foi observada pelo microscópio eletrônico de varredura (MEV). Os dados foram analisados por meio do teste t não pareado para a comparação inter e intragrupos e o nível de significância à 5%. Os resultados demonstraram que a temperatura corporal não afetou a resistência a torção e deflexão angular quando comparada com a temperatura ambiente (P>0.05). No entanto, na temperatura de 36°C o instrumento com tratamento térmico Blue apresentou menor deflexão angular quando comparado com o Gold (P<0.05). Não houve diferença significante entre os dois instrumentos em relação a resistência à torção. A temperatura corporal não modificou a resistência torcional dos instrumentos fabricados com tecnologia Blue e Gold. No entanto, os instrumentos com NiTi Blue apresentaram menor deflexão angular do que o Gold a 36°C.

Effect of titanium plate internal fixation combined with titanium nail intermaxillary traction on jaw fractures / 中华医学美学美容杂志

Objective:To observe the difference in the effect of simple titanium plate internal fixation and titanium plate internal fixation combined with titanium nail intermaxillary traction in the treatment of jaw fractures and their impact on the oral and maxillofacial function of patients.Methods:From August 2016 to May 2021, 94 patients with jaw fractures admitted to the Department of Stomatology, Linyi Central Hospital, Shandong (supplementing the gender, age range and average age of the patients), were divided into 47 cases in the control group, and the titanium plates were used alone, combined operation group 47 cases, titanium plate internal fixation combined with intermaxillary traction with titanium nails. The changes of oral and maxillofacial function and fracture healing were measured before operation and 3 months after operation, and the perioperative indicators and postoperative complications were recorded.Results:Three months after operation, the scores of maxillofacial function, mouth function and masticatory function in the combined operation group (0.52±0.09 points, 0.67±0.12 points, 0.58±0.08 points) were significantly lower than those in the control group (1.05±0.21 points, 1.14±0.22 points, 1.02±0.21 points) ( t=15.90, 12.86, 13.42, P<0.05). The effective rate of the combined operation group was 95.74% (45/47), which was significantly higher than that of the control group (80.85%, 38/47) (χ 2=5.05, P<0.05); there was no significant difference in operation time and hospitalization time between the groups ( P>0.05), the fracture healing time in the combined surgery group (65.02±7.06) d was significantly shorter than that in the control group (82.69±10.25) d ( t=9.73, P<0.05). The postoperative complication rate of combined treatment group was 6.38% (3/47), which was significantly lower than the control group 21.28% (10/47) (χ 2=4.37, P<0.05). Conclusions:In the treatment of jaw fractures, titanium plate internal fixation combined with titanium nail intermaxillary traction treatment can significantly improve the oral and maxillofacial function of patients, promote postoperative fracture healing, improve curative effect and reduce the incidence of complications compared with simple titanium plate internal fixation.

Treatment of the aged patients with unstable proximal humeral fracture with a locking plate and an intramedullary titanium mesh / 中华创伤骨科杂志

Objective:To evaluate the radiological and clinical outcomes of the aged patients with unstable proximal humeral fracture (UPHF) treated with a locking plate and an intramedullary titanium mesh.Methods:A retrospective study was conducted to analyze the 43 aged patients with UPHF who had been admitted to Department of Orthopedics, Zhongda Hospital Affiliated to Southeast University from January 2017 to July 2019. There were 13 males and 30 females with an age of (71.3±10.3) years (from 60 to 83 years). All patients were treated with a locking plate and an intramedullary titanium mesh to support. The postoperative imaging measurements included changes in humeral head height (HHH) and neck-shaft angle (NSA) (the difference between 3 years after surgery and the second day after surgery, taken as an absolute value); the postoperative clinical measurements included visual analogue scale (VAS), range of shoulder motion, Constant-Murley shoulder functional score (Constant score), American Shoulder and Elbow Surgeons (ASES) score, and incidence of complications.Results:All patients were followed up for (39.2±2.3) months after surgery. The change in HHH at 3 years after surgery was (1.5±1.1) mm, and the change in NSA at 3 years after surgery 3.3°±2.6°. At 3 years after surgery, the VAS score was (2.2±1.3) points, the Constant score (79.2±9.1) points, and the ASES score (78.9±9.2) points; the range of forward extension was 143.2°±20.8°, the range of outward extension 139.3°±23.1°, and the range of outward rotation 55.1°±4.7°. Complications after surgery were found in 6 patients, including humeral head necrosis in 2 cases, ectopic ossification in 1 case, and infection in 3 cases.Conclusion:In the treatment of the aged patients with UPHF, a locking plate combined with an intramedullary titanium mesh can help to restore the medial column support, leading to fine radiological and clinical outcomes.

Effects of Fretting Stimulation Amplitude on Bone Growth and Micro-Injury at the Interface Between Bone Tissues and TitaniuBead Coating / 医用生物力学

Objective To improve the performance of artificial joint at biological fixed interface by frettingmechanical stimulation. Methods Taking the bonding sample of active rat bone tissues and inactive titanium bead coating as the research object, by using the self-developed fretting mechanical stimulation test device, the effects of mechanical stimulation with different tangential fretting amplitudes on growth promotion and micro-injury of bone tissues at fixed interface were explored, and the mechanism of growth promotion and micro-injury of bonetissues on the surface of titanium bead coating under fretting stimulation was revealed. Results The mechanical stimulation group with 40 μm fretting amplitude showed the maximum interface bonding force between bone tissues and titanium bead coating. The tangential fraction force-displacement curves changed from elliptic shape to linear shape, and the bonding interface was in adhesion area, which was difficult to become loose. The bone tissues had the most complete structure, and the number of tissue cells adhering and growing on the surface of titanium bead coating was the largest, as well as the distribution range was the widest. With the increase of fretting amplitude, the promoting effect of fretting stimulation on bone growth weakened, the bonding strength between bone tissues and titanium bead coating interface gradually decreased, the internal cavity area increased, the number and proliferation activity of tissue cells decreased to varying degrees as well. Conclusions Fretting stimulation with different amplitudes can promote the growth of bone tissue and cause micro-injury at the same time, and the optimal fretting amplitude is 40 μm.

Effects of titanium dioxide nanoparticles on circRNA expression profiles in human hepatocellular carcinoma cells HepG2 / 北京大学学报(医学版)

OBJECTIVE@#To investigate the effect of titanium dioxide nanoparticles (TiO2 NPs) on the expression profile of circular ribonucleic acid (circRNA) in human hepatocytes through in vitro cell experiments, and to attempt to understand the potential mechanism of hepatotoxicity through bioinformatics analysis.@*METHODS@#TiO2 NPs were characterized from the aspects of particle size, shape and agglomeration state. The cell counting kit-8 (CCK8) was used to detect the cytotoxicity of TiO2 NPs against human hepatocellular carcinoma cells (HepG2) after exposure to 0, 1.56, 3.13, 6.25, 12.5, 25, 50, 100, and 200 mg/L TiO2 NPs for 24 h or 48 h. The cells were treated at doses of 0 mg/L TiO2 NPs (control group) and 100 mg/L TiO2 NPs (treatment group), and collected after exposure for 48 h, and then RNA from the extracted cell samples was collected and sequenced. The differential circRNAs between the control and the TiO2 NPs treatment groups were screened, and then the enrichment pathway of the differential circRNA target gene was analyzed by multivariate statistics. According to the sequencing results, significantly altered genes and important genes in the significant enrichment pathways were screened, and real-time reverse transcription-polymerase chain reaction (real-time RT-PCR) was performed to verify the results.@*RESULTS@#TiO2 NPs were spherical anatase with a hydrated particle size of (323.50±85.44) nm and a Zeta potential of (-21.00±0.72) mV in a serum-free medium. The results of the CCK8 cytotoxicity assay showed that with the increase of TiO2 NPs concentration, cell viability gradually decreased. A total of 11 478 circRNAs were found by RNA sequencing. Compared with the control groups, TiO2 NPs treatment groups (100 mg/L) had a total of 89 differential circRNAs, of which 59 were up-regulated and 30 were down-regulated. Analysis of the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway showed that the targeted genes of differential circRNAs were mainly enriched in fatty acid degradation, Fanconi anemia pathway, and fatty acid metabolism. The expression levels of circRNA.6730, circRNA.3650 and circRNA.4321 were significantly different between the TiO2 NPs treatment group and the control group, which were consistent with the sequencing results.@*CONCLUSION@#TiO2 NPs can induce changes in circRNA expression profile, and epigenetics may play an important role in the mechanism of hepatotoxicity.

In vitro cytological comparison of osseointegration properties between biomimetic bone trabecular and regular porous structure / 西安交通大学学报(医学版)

【Objective】 To investigate the effects of biomimetic bone trabecular with the same porosity and pore size and regular porous structure on the adhesion, proliferation, and differentiation of osteoblasts, so as to provide theoretical basis for the improvement of osseointegration performance of titanium alloy implants. 【Methods】 The biomimetic bone trabecular and regular porous structures with the same porosity and pore size were generated by computer-aided software, and then processed into disc-shaped Ti6Al4V scaffolds with a diameter of 10 mm and a height of 3 mm by selective laser melting technology. MC3T3-E1 cells, the precursor cells of mouse osteoblasts in the logarithmic growth phase, were seeded on two kinds of scaffolds and divided into biomimetic bone trabecular group and regular porous structure group. After 3 hours of culture, acridine orange staining and phalloidin /DAPI staining were used to evaluate the number of cell adhesion. After 3 days of culture, the scaffolds were examined by scanning electron microscopy to evaluate the adhesion state of cells. After 1, 3, and 5 days of culture, the scaffolds were taken for CCK8 detection to observe the proliferation of cells. After 7 and 14 days of differentiation, alkaline phosphatase (ALP) activity was detected. After 14 days of differentiation, the expressions of osteogenesis-related genes (ALP, OCN, RUNX2) were detected by RT-PCR. After 30 days of differentiation, the scaffolds were stained with alizarin red and 100 g/L cetylpyridinium chloride was used to dissolve mineralized nodules. Calcium salt deposition was qualitatively and quantitatively detected to evaluate cell differentiation. 【Results】 The results of acridine orange and phalloidin /DAPI staining showed that the biomimetic trabecular Ti6Al4V scaffold adhered to more MC3T3-E1 cells than the regular porous structure, and the cytoskeleton of the former scaffold was more densely distributed. The results of scanning electron microscopy showed that the pseudopodia of MC3T3-E1 cells on the biomimetic bone trabecular Ti6Al4V scaffold were longer and the extension state was better than that of the regular porous structure. CCK8 test showed that the proliferation of MC3T3-E1 cells on the biomimetic trabecular bone titanium alloy scaffold was significantly higher than that on the regular porous structure on the 3rd and 5th day, and the difference gradually increased with the increase of time, with statistical significance (P<0.05). The results of cell differentiation test showed that ALP activity on the bionic trabecular scaffold was higher than that on the regular porous structure (P<0.05). The expressions of osteogenic genes (ALP, OCN, RUNX2) in MC3T3-E1 cells on the biomimetic bone trabecular titanium alloy scaffold were significantly higher than those on the regular porous structure (P<0.05). After 30 days of induction, the amount of calcium salt deposited in the bionic trabecular titanium alloy scaffold was significantly larger than that in the regular porous structure (P<0.05). 【Conclusion】 The biomimetic bone trabecular with a porosity of 65% and an equivalent pore size of 600 μm is more conducive to the adhesion, proliferation and differentiation of mouse osteoblast precursor cells MC3T3-E1 on the titanium alloy scaffold than the regular porous structure with the same porosity and pore size. It is theoretically more conducive to improving the osseointegration performance of titanium alloy implants.